The flat electrodes M 6-Bi 200 and M 6-Bi300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are suitable for measuring moisture in edge and floating joints. For example, when water needs to be detected that is located under the subfloor. The electrodes are insulated at the shaft so as not to influence the measurement result. The electrode pair is insulated at the shaft and they are approximately 200 mm (M6-Bi200) or 300 mm (M6-Bi300) long. A pair of M6 electrodes is required to support the flat electrodes The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered standard among working instruments among professionals in building drying and water damage drying. They are also recognized by damage experts in insurance companies.  Technical data  Dimensions M6-Bi200 (Gann article no. 31003702): 200 x 10 x 0.8 mm Dimensions M6-Bi300 (Gann article no. 31003703): 300 x 10 x 0.8 mm

Read more less

This data logger measures the CO? air quality in rooms such as offices, classrooms or even in your own home. It has a large data memory for 50,000 measured values ​​for long-term recording of carbon dioxide concentrations, air temperature and humidity values ​​in freely definable measuring intervals from 1 second to 12 hours. It uses a CO? traffic light to show how the air quality is changing.   The recorded data can be easily transferred to the connected PC via a fast USB connection and then evaluated and logged using the analysis software included in the delivery. Thanks to the integrated Li-Ion battery, the CO? data logger can be used in mobile applications as well as in stationary tabletop use.   The simultaneous recording of humidity and temperature values ​​plus CO2 concentrations also provides property managers or landlords with optimal options for monitoring ventilation behavior.     Automatic Baseline Calibration   The CO? fresh air value expected today is around 400 ppm (0.04%vol). This is assumed by the device as the lowest limit (baseline). A special algorithm then permanently monitors the lowest CO? measured value determined by the sensor over several days. This takes place over a preconfigured time interval and slowly corrects any long-term drift detected compared to the expected fresh air value of 400 ppm (or 0.04%vol) CO?.   In normal indoor applications, the carbon dioxide level drops to almost the level of the outside air at some point over the course of a week. By recording the values ​​over a period of 8 days and then comparing the lowest value with the 400 ppm point, the measuring device recognizes whether it needs to adjust the zero point or not. This happens completely automatically. The algorithm thus takes advantage of the fact that the CO2 level in buildings/rooms regularly stabilizes at a minimum for a certain period of time when they are not occupied. In rooms that are permanently occupied or in which there is a constantly increased CO2 concentration (e.g. greenhouses), this principle of automatic adjustment does not work.     Advantages at a glance   • Accurate and long-term stable NDIR measurement of carbon dioxide concentrations in room air • Simultaneous display of CO? values, room temperature, humidity, date and time • Minimum and maximum value function for CO?, air temperature and humidity • Carbon dioxide alarm function with warning tone for freely definable limit values • Additional symbolic CO? indicator display comparable to a CO? traffic light • Large backlit display with easy-to-read measurement value display • Autonomous long-term logging of carbon dioxide concentration, room temperature and humidity • Memory for 50,000 measured values • Freely definable storage interval from 1 second to 12 hours • USB interface for measurement data transfer • For tabletop installation and mobile use • PC analysis software     scope of delivery • Measuring device • Battery(s) • Power supply • USB connection cable • PC software (download) • Operating instructions     Technical data   measuring range CO2 0 to 9999 ppm accuracy ±75 ppm / ±5 % resolution 1 ppm measuring range air temperature -5 °C to +50 °C resolution 0.1 °C accuracy ±1 °C humidity measuring range 0.01 % RH to 99.9 % RH resolution 0.1% RH accuracy ±5 % RH Advertisement LCD power supply 1 x 3.7 V Li-Ion battery or 230 V power supply sampling + storage interval > 1 s interface USB Weight 245 g Dimensions (L x W x H) 90 x 110 x 98 mm Trotec article no. 3,510,205,015 guarantee 2 years

Read more less

The practical telescopic probe makes this precision anemometer from the MultiMeasure Professional series a versatile measuring instrument for determining flow, temperature and volume flow.   For measurements in channels or at remote locations, the probe can be continuously extended up to a usable length of one meter. The combination of a robust hot wire sensor and highly developed microprocessor technology for signal processing guarantees fast and precise measurement results for every requirement, which are clearly displayed on the illuminated dual display of the easy-to-read LC display even in poorly lit environments.     application examples     • Testing of heating systems, ventilation ducts or air conditioning systems • Adjustment of the air flow when using multiple devices • Commissioning • Maintenance tasks • Measurement of air velocity and temperature at air outlets and ventilation slots • Certification of critical environments • Channel measurements • Leak tests on windows or doors     Advantages at a glance   • Measurement of air velocity (in m/s, mph, km/h, kn, ft/min) and air volume flow (m³/min, ft³/min) • Slim telescopic probe - continuously extendable up to 1 m in length - enables measurements even in hard-to-reach places • Large, easy-to-read LCD with backlight and dual measurement display • Point-by-point and temporal averaging • Minimum, maximum and hold function • Delivery including calibration certificate      Optional   First, read the data stored in the device, such as images, Excel tables or graphics, using the software included in the delivery. Now transfer the results using copy and paste into one of the ready-made report templates in the MultiMeasure Studio PRO software (download MultiMeasure Studio STD), which you can use to create professional measurement reports easily and in no time at all. The text modules (currently only available in the German version) and sample reports included can be edited as required and can also be put together at any time to create new templates defined by the user.     scope of delivery   • Measuring device • evaluation software • Operating instructions   Technical data   air flow measurement measuring range accuracy resolution measuring principle   measuring air volume measuring range   measuring air temperature measuring range accuracy resolution   0.1 to 25 m/s ± 5% of the measured value + 1 measuring unit 0.01 m/s hot wire     0.001 - 999,000 m³/min or ft³/min     0 °C to +50 °C ± 1 °C 0.1 °C   display LCD interfaces USB energy supply 9V block battery ambient temperature 0 °C to +50 °C Dimensions L x W x H 210 x 75 x 50 mm Weight 280 g tripod thread yes, 1/4 inch Automatic shutdown Yes Trotec article no. 3,510,205,042 guarantee 2 years  

Read more less

What medicine calls a “minimally invasive procedure” can also be carried out effectively and purposefully in everyday life: the “examination” with the help of an endoscope. The small camera of the videoscope is inserted into the interior of hard-to-reach cavities and the footage can be seen live and in color on the 3-inch LCD display.   This method makes it very easy to search technical areas, cable ducts, pipes or engines for possible damage or to carry out regular maintenance checks - even when the probe is under water. The advantage is obvious: technical devices do not have to be laboriously dismantled, drywalls do not have to be pried open, water circulation systems do not have to be emptied or cable and pipe ducts do not have to be exposed. Even in the event of a pest infestation, this small camera can be used to quickly check where insects and rodents are finding shelter.     For professional and private use   Ideal for caretakers, technicians or home users - when it comes to a reliable and fast endoscopic visual inspection. Whether indirect optical inspection of hidden machine parts or for insights into cavities that are only accessible through small openings - the narrow and semi-flexible gooseneck probe with mini camera has a diameter of just 5.5 mm and is therefore ideal for in-between car inspections or an insightful look into narrow, hidden places such as gaps, drains, pipes or cable ducts.   The pre-bendable 95 cm long gooseneck probe can be inserted into small openings and the four-stage dimmable light from 6 LEDs ideally illuminates the surroundings for high-quality inspection images - even under water. The LCD color display delivers razor-sharp photos and videos with a high resolution of 1280 x 720 pixels and a 3x zoom is available for magnifying the view. The practical image rotation function by 180° simplifies the display in the event that the image is displayed upside down due to the position of the probe.     With 3 different attachments suitable for all purposes   If required, the tip of the gooseneck probe can also be equipped with a 45° mirror, hook or magnet attachment, thus expanding the range of functions. The 45° mirror attachment included in the scope of delivery enables, for example, a "look around the corner" or a closer look at the object from different perspectives. With the magnet or hook attachment, you can move objects out of the way or take them out. Thanks to the wireless operation, the device is extremely flexible and user-friendly. The display is equipped with a date and time display for precise temporal documentation. You will receive a complete set including all the necessary utensils for immediate use in a practical carrying case. Please note: To save photos and videos, you also need a micro SD card with up to 32 GB of storage space.     Compact and fully equipped all-rounder   45° mirror attachment In order to be able to carry out a thorough inspection from all sides and from different perspectives, a 45° mirror attachment is included in the complete set. This even allows you to look around corners.   hook attachment Once you have located and located the missing object or a foreign body using the probe, you can easily recover or remove it using the hook attachment. Many a piece of jewelry that was thought to be lost has been found again in this way.   magnetic attachment Without the hassle of moving furniture, screws, nuts, coins and other metal parts containing iron, nickel or cobalt can be easily found or removed from under heavy cupboards and sofas, or earrings and rings can be quickly and safely located in the drain. The recovery is easy using the practical magnet attachment on the camera.   Brightness control brings light into the darkness Of course, there are no daylight conditions in hollow spaces, cable ducts and covered areas. In order to have a perfect view here too, the camera has its own light sources that illuminate the respective environment appropriately and provide brilliant photo views. It is equipped with a camera light and an equipment light.   camera light on the probe head The camera light, which can be adjusted to 4 brightness levels, has 6 integrated LEDs and ensures perfectly illuminated inspection photos and videos.   device light There is a device light on the back of the handset that can be used to illuminate objects for a better view. Alternatively, this light source can also be used as a flashlight.   photo and video functions Brilliant image and photo playback with a maximum camera resolution of 1280 x 720 pixels. For a detailed view, you can "freeze" an image sequence during the ongoing video transmission and examine it more closely as a still image. Using the 3x zoom, image sections can be enlarged 1.0x, 1.5x and 2.0x. If a micro SD card is inserted in the device, all recordings can be saved as photos or videos. Thanks to the practical flip function, the image can be rotated 180°, so that you get a perfect view in almost any working position.     For universal applications   Find faster instead of searching for a long time With the videoscope, you can easily inspect places that would otherwise be inaccessible. This means that small parts that have accidentally fallen down, such as screws in the engine compartment or on hard-to-reach machine parts, can be found more quickly and effortlessly fished out using the easy-to-install hook or magnet attachment.   Waterproof immersion At the tip of the gooseneck probe is a color image camera head with adjustable lighting that is dust and waterproof to IP67 protection class. This means you can immerse the probe in water and quickly check whether, for example, unwanted objects are blocking the patio drain.   Check machine condition Compact machines or devices with a solid housing in particular cannot be opened easily. To be able to take a look inside the device, simply insert the 5.5 mm wide gooseneck probe into a suitable opening and use the display to get a comfortable all-round view of the inspection area.   The quick car inspection Even without dismantling the entire engine block, you want to know where the leak is, where water is dripping onto the floor, which cable the marten has ripped out, or where there is an obvious cable defect. Simply switch on the device, insert the probe, and check the situation on the display.   Finding Uninvited Roommates Insects and mice like to live in the furthest corners of the attic or basement. Other vermin such as ants also like to spread out in partition walls and are just as harmful. Now you can easily search for the pests and their nests or remains without having to do major clearing work or even removing wall, ceiling or floor coverings.     Advantages at a glance   • 3 inch digital LCD color display • 95 cm long, semi-flexible and pre-bendable gooseneck probe (Ø 5.5 mm) • Waterproof to IP67 protection class (gooseneck probe and camera head) for underwater use • Includes 3-piece accessory set with 45° mirror, hook and magnet attachment • Still image, photo and video mode • High-quality camera with a resolution of 1280 x 720 px • Taking photos and videos - can also be saved with a Micro SD card of up to 32 GB • 6-fold LED light on the camera head with 4 brightness levels • LED light in the housing (flashlight function) • Compact probe winding • Flip function for 180° image rotation • 3x zoom • Depth of field 1 cm to 30 cm, field of view 65° • Date and time display • Robust construction • Wireless battery operation for mobile, mains-independent use • Battery status indicator • Includes 4 x alkaline LR6 AA batteries, 1.5 V • Protective carrying case • Simple intuitive operation    scope of delivery   • Measuring device • Mirror adapter • Magnetic adapter • Hook adapter • Batteries • Carrying case • Operating instructions     Technical data   display Color display, 3 inch LCD (640 x 480 pixels) memory SD card 32 GB max. (optional) file formats JPG (photo) + AVI (video) Dimensions H x W x D 162 x 85 x 35 mm Weight 385g protection class IP67 power supply 4 x AA batteries (included) ambient temperature -10 °C to +60°C Trotec article no. 3,510,009,122 guarantee 2 years

Read more less

The UNI 1 is an electronic and universal triple measuring device to which a wide range of active electrodes can be connected. The measuring ranges building moisture, air humidity and temperature can be measured. Measurements cannot be taken with the UNI1 alone. The desired active electrodes (sensors) are also required, which are connected to the measuring device. The following active electrodes can be connected:   • B 50, B 60 and LB 70 for non-destructive moisture measurement and indication in ceilings, walls, floors and other building materials • MB 35 for surface moisture measurement on concrete • MH 34 for measuring high moisture levels (40–200%) in softwood • IR 40 EL for measuring surface temperature, thermal bridges and dew point temperature • RF-T 28, RH-T 37 EL and RH-T 37 EL flex for humidity and air temperature measurement and • all Pt 100 temperature sensors We usually have the B50 and B60 as well as the RF-T 28, RH-T 37 flex in stock, but we can also order any other electrode for you at advantageous prices. The delivery time is approximately 14 days from the order. Using the device and evaluating the data requires some knowledge of moisture measurement. The device is therefore particularly suitable for air conditioning technicians, water damage assessors, insurance companies and as a supplement to a wood moisture meter. If you are looking for a moisture meter that is easier to use, take a look at our handheld measuring devices, which are also available with good precision and at a significantly lower price. Characteristics • Handy quick moisture meter for lightning-fast individual and series measurements • Direct display of humidity values ​​via the large LCD display, resolution: 0.1 digit • Fast measurement of moisture in hardened building materials using the capacitive high-frequency measuring method • Precision in temperature measurement through Pt 100 measuring resistors in 4-wire technology • Fully automatic device comparison scope of delivery The delivery includes the Uni1 base station without any additional accessories. The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered standard among working instruments among professionals in building drying and water damage drying. They are also recognized by damage experts in insurance companies.  Technical data  Gann Article No.: 30001430 Device comparison: Fully automatic Single or series measurements: in a matter of seconds Power supply: 9-V block battery (included or Ni-Cd battery (optional accessory) Dimensions (L/W/H): 140 x 90 x 42/50 mm Weight: 230 gr. Guarantee: 2 years

Read more less

Current production bottleneck at the manufacturer. Only small quantities available. An easy-to-use measuring device for detecting moisture in walls, ceilings and floors using a non-destructive measuring method based on the dielectric constant/high frequency measuring principle. It has a digital LCD display and a flexible ball probe for detecting moisture and moisture distribution in solid building materials. Depending on the density of the substance to be measured, the Compact B measures approx. 3 cm into the material. A practical companion on building sites for site managers, architects and floor fitters as a preliminary test device for all CM devices. Due to its ease of use, it is also suitable for private users who want to monitor the drying progress of new buildings or after water damage. Drying can be monitored very easily, especially when walls have soaked up water from below. materials The moisture meter is particularly suitable for solid substances such as concrete, brick and the like. The value for soft materials requires some experience and knowledge of the specific material densities (Sagex, wood, gypsum, etc.). For this application, consider the Gann Hydromette BL Compact B2 model, where the material types can already be preset. The measurement also does not produce good results if the measurement is taken through paving slabs, cavities or protective films. Application The ball probe is held directly onto the material at a right angle. At the push of a button, the moisture content appears in the form of a numerical value within seconds. This can be converted into the moisture value using the table provided. No separate electrodes or cables required. The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered standard among working instruments among professionals in building drying and water damage drying. They are also recognized by damage experts in insurance companies.  Technical data   Gann Article No.: 30002030 Measuring range: 0 - 100 digits measuring depth: max. approx. 6 cm Enlargement: 6-fold Device comparison: Fully automatic Single or series measurements: in a matter of seconds Power supply: 9-V block battery (included) Dimensions (H/W/D): 20 x 3.5 x 3.5 cm Weight: 190 gr. Guarantee: 2 years                                Other Gann measuring instruments We are an official sales point for Gann measuring instruments in Switzerland and can offer you all Gann articles at advantageous conditions, for example: Gann Hydromette HB30, HT65, HT85 T, UNI1, UNI2, RTU600, CH17 and many more.

Read more less

The active electrode RFT 28 EL is a sensor for measuring air humidity and air temperature with a fast measuring speed. It is an addition to one of the Gann Hydromette base stations listed below and cannot be operated separately from them. The sensor's fast response speed enables it to detect leaks, such as gaps in doors or leaky windows, as even small air currents affect the measured value display. The sensor adapts to the ambient climate even when switched off. For particularly precise measurements, the device should be exposed to the ambient climate to be measured for 10 - 15 minutes so that any temperature differences between the electrode and the surrounding climate can be compensated.    Suitable base devices  The electrode can be used with all hydromets that support this procedure, i.e. with the following basic devices: • Hydromette M 4050 • Hydromette RTU 600 • Hydromette UNI 1 • Hydromette UNI 2   The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered standard among working instruments among professionals in building drying and water damage drying. They are also recognized by damage experts in insurance companies.   Technical data  Gann Article No.: 31003155 Humidity measuring range: 7 - 98 % RH Measuring range air temperature: -10 - +80 °C Humidity measurement tolerance: ± 1.8% (at 10-90% RH) Air temperature measurement tolerance: ± 0.75 °C (-10 to +55 °C) The response time of the humidity sensor (slightly moving air, ambient temperature: 20 - 25 °C) is 20-30 seconds, depending on the humidity difference. Warranty: 2 years

Read more less

The active electrode B 50 is a sensor for measuring building moisture. It works with a capacitive high-frequency measurement and measures all types of solid materials non-destructively. It detects the moisture distribution in ceilings, walls, concrete and other hardened building materials.   The following measuring ranges are covered by the B 50 • 0 - 199 digits (scan range), moisture qualification via table • 0.3 - 8.5 wt.%, conversion depending on the building material via table • 0.3 - 6.5 CM-%, conversion depending on the building material via table Suitable base devices The electrode can be used with all hydromets that support this procedure, i.e. with the following basic devices: • Hydromette HB 30 • Hydromette M 4050 • Hydromette RTU 600 • Hydromette UNI 1 • Hydromette UNI 2    Using the device and evaluating the data requires some knowledge of moisture measurement. The device is therefore particularly suitable for air conditioning technicians, water damage assessors, insurance companies and as a supplement to a wood moisture meter. If you are looking for a moisture meter that is easier to use, consider our handheld measuring devices "Hydromette Compact B" and "Hydromette BL Compact B2", which are also available with good precision and at a significantly lower price. The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered standard among working instruments among professionals in building drying and water damage drying. They are also recognized by damage experts in insurance companies.    Technical data   Gann Article No.: 31003750 Depth effect: up to max. 120 mm Measuring range: 0 - 199 digits (scan range), moisture qualification via table 0.3 - 8.5 wt.%, conversion depending on the building material via table 0.3 - 6.5 CM-%, conversion depending on the building material via table Guarantee: 2 years

Read more less

Fast, precise moisture meter for detecting moisture in walls, ceilings and floors. With this easy-to-use, pocket-sized quick moisture indicator, you can quickly and reliably track your drying progress on construction sites or during water damage repair. The electronic moisture indicator works with a non-destructive measuring method based on the dielectric constant/high frequency measuring principle. It has a ball probe for detecting moisture and moisture distribution in solid building materials such as walls, ceilings and floors (only suitable to a limited extent and for indicative purposes for measuring wood). Application First, the desired material is selected via an LCD display and saved at the touch of a button. Then the metal ball is held at a right angle to the material to be measured and the measuring button is briefly pressed. The result is immediately visible.   Handling a ball measuring electrode  It is important to have a 90° angle to the material being measured and to hold the hydrometer/electrode correctly. To avoid any influence from the hand of the person taking the measurement, only the back half of the electrode may be covered by the hand during the measuring and checking process. The front half (display/ball) of the device must remain free.   Correct handling of the device: When taking measurements, always hold the device by the lower part of the housing:     Incorrect handling of the device: During the measurement, the hand influences the measuring field of the ball electrode and thus changes the measured value.    Selectable material table • Display in digits • Cement screed in % by weight • Anhydrite screed in % by weight • Concrete in % by weight • Cement mortar in % by weight • Lime mortar in % by weight • Mixed plaster in % by weight • Gypsum plaster in % by weight • Cement screed in CM % • Anhydrite screed in CM % • Gypsum plaster in CM % • Lime mortar in CM % • Cement mortar in CM % • Mixed plaster in CM % • Concrete in CM % Wt %: The material moisture in weight percent (also solid moisture) indicates the absolute proportion of free water contained in a solid in %. Values ​​in the range of 0.2 - 0.3 % indicate dry materials. CM %: The displayed CM value simulates the removal and measurement of a material sample in the manometer, where the sample is mixed with calcium carbide. This creates a gas whose pressure is measured. Depending on the density of the material, the value is very similar to weight %. For anhydrite, for example, 1 weight % = approx. 1 CM%. For concrete floors, the CM value differs significantly: 1 weight % = approx. 1.5 CM%. Dry concrete floors/walls should have CM values ​​below 2.0% (calcium sulfate or anhydrite screed: below 0.3%). The weight percentage is therefore the easier value to understand for non-specialists. Advantages and Features • Handy pocket-sized moisture meter for quick single and series measurements • A limit value can be set individually for each building material, and if this limit is exceeded, an acoustic warning signal sounds • Scan mode (1 - 199.9 digits) or direct display of moisture values ​​in weight% or CM-% for building materials, resolution: 0.1% • Characteristic curves for 7 types of building materials • Min, max and hold function for the measured values • Automatic calibration when the device is switched on • The device is delivered complete with 9 V battery and plastic box Innovations compared to the previous Hydromette BL Compact B The BL2 is the further development of its predecessor, the Gann Hydromette BL Compact B. • Longer measuring probe for more comfortable use • Significantly stronger high-frequency measuring field for greater penetration depth into the building material • Finer measurement resolution of now 0-199 digits for an even more precise delimitation of wet areas, which was previously only possible with significantly more expensive measuring devices • The direct display of the CM % has been expanded to include several building materials. The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered standard among working instruments among professionals in building drying and water damage drying. They are also recognized by damage experts in insurance companies.    Technical data   Gann Article No.: 30012032 Measuring range:  0 – 199.9 digits (scan range) 0.3 – 6.0 wt.% or 0.3 – 4.0 CM-% measuring depth: max. approx. 6 cm Advertisement: device/ambient temperature Trend indicator: hardwood and softwood Max-Hold function: Yes Alarm function: Acoustically Calibration: Automatically Device shutdown: Automatically Single or series measurements: In seconds Power supply: 9-V block battery (included) Dimensions (L x W x H): 190 x 50 x 30 mm Weight: 180 gr. Special features: No separate electrodes or cables required Ideal pre-test device for all CM devices Guarantee: 2 years                                           Other Gann measuring instruments We are an official sales point for Gann measuring instruments in Switzerland and can offer you all Gann articles at advantageous conditions, for example: Gann Hydromette HB30, HT65, HT85 T, UNI1, UNI2, RTU600, CH17 and many more.

Read more less

The active electrode B 60 is a sensor for measuring building moisture. It works with a capacitive high-frequency measurement and measures all types of solid materials non-destructively. It detects the moisture distribution in ceilings, walls, concrete and other hardened building materials. The basic function is the same as the B50 probe, but the B60 also has a built-in limit value adjuster from 20 - 140 digits and an acoustic signal generator.    The following measuring ranges are covered by the B 60 • 0 - 199 digits (scan range), moisture qualification via table • 0.3 - 8.5 wt.%, conversion depending on the building material via table • 0.3 - 6.5 CM-%, conversion depending on the building material via table Suitable base devices  The electrode can be used with all hydromets that support this procedure, i.e. with the following basic devices: • Hydromette HB 30 • Hydromette M 4050 • Hydromette RTU 600 • Hydromette UNI 1 • Hydromette UNI 2    Using the device and evaluating the data requires some knowledge of moisture measurement. The device is therefore particularly suitable for air conditioning technicians, water damage assessors, insurance companies and as a supplement to a wood moisture meter. If you are looking for a moisture meter that is easier to use, take a look at our handheld measuring devices, which are also available with good precision and at a significantly lower price. The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered standard among working instruments among professionals in building drying and water damage drying. They are also recognized by damage experts in insurance companies.     Technical data   Gann Article No.: 31003760 Depth effect: up to max. 120 mm Measuring range: 0 - 199 digits (scan range), moisture qualification via table 0.3 - 8.5 wt.%, conversion depending on the building material via table 0.3 - 6.5 CM-%, conversion depending on the building material via table Guarantee: 2 years

Read more less

The UNI 2 is an electronic and universal triple measuring device to which a wide range of active electrodes can be connected, as with the smaller UNI1 model. In addition, all building moisture measuring electrodes that are based on the resistance measuring principle can be connected. The following measuring ranges can be determined. • Building moisture • Humidity • Air temperature • Material temperature • Surface temperature Measurements cannot be taken with the UNI2 alone. The desired active electrodes (sensors) are also required, which are connected to the measuring device. The following active electrodes can be connected: • B 50, B 60 and LB 70 for non-destructive moisture measurement and indication in ceilings, walls, floors and other building materials • MB 35 for surface moisture measurement on concrete • MH 34 for measuring high moisture levels (40–200%) in softwood • IR 40 EL for measuring surface temperature, thermal bridges and dew point temperature • RF-T 28, RH-T 37 EL and RH-T 37 EL flex for humidity and air temperature measurement and • all Pt 100 temperature sensors.   We usually have the B50 and B60 as well as the RF-T 28, RH-T 37 flex in stock, but we can also order any other electrode for you at advantageous prices. The delivery time is approximately 14 days from the order. Using the device and evaluating the data requires some knowledge of moisture measurement. The device is therefore particularly suitable for air conditioning technicians, water damage assessors, insurance companies and as a supplement to a wood moisture meter. If you are looking for a moisture meter that is easier to use, take a look at our handheld measuring devices, which are also available with good precision and at a significantly lower price. measuring ranges   building moisture: for resistance-based measurements: (*) 0 - 80 digits 0.3 - 25 wt.% or 0.3 - 12 CM-%   for capacitive measurements: (*) 0 - 199 digits (scan range) 0.3 - 8.5 wt.% or 0.3 - 6.5 CM-% with B 50, B 60 and LB 70 2 - 8 wt.% with MB 35 on concrete surfaces   when measuring the relative humidity in the borehole: (*) 5 - 98 % RH or 0.2 - 3.7 wt.% with RH-T 37 EL and RH-T 37 EL flex   (wood moisture): 40 - 200 % (atro) with MH 34 on softwood   Humidity: 5 - 98 % RH with RF-T 28, RH-T 37 EL and RH-T 37 EL flex   Temperature: -200 - +600 °C depending on the Pt 100 temperature sensor   Infrared measuring range: -20 - +199.9 °C with IR 40 EL (*) = Moisture conversion in % depending on the building material using the conversion table   Using the device and evaluating the data requires some knowledge of moisture measurement. The device is therefore particularly suitable for air conditioning technicians, water damage assessors, insurance companies and as a supplement to a wood moisture meter. If you are looking for a moisture meter that is easier to use, consider our handheld measuring devices "Hydromette Compact B" and "Hydromette BL Compact B2", which are also available with good precision and at a significantly lower price. Characteristics • Handy quick moisture meter for lightning-fast individual and series measurements • Direct display of humidity values ​​via the large LCD display, resolution: 0.1 digit • Fast measurement of moisture in hardened building materials using the resistance and capacitive high-frequency measuring method • Precision in temperature measurement through Pt 100 measuring resistors in 4-wire technology • Fully automatic device comparison scope of delivery The delivery includes the Uni2 base station without any additional accessories. The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered standard among working instruments among professionals in building drying and water damage drying. They are also recognized by damage experts in insurance companies.    Technical data  Gann Article No.: 30001550 Device comparison: Fully automatic Single or series measurements: in a matter of seconds Power supply: 9-V block battery (included or Ni-Cd battery (optional accessory) Dimensions (L/W/H): 140 x 90 x 42/50 mm Weight: 230 gr. Guarantee: 2 years

Read more less

The RHT 37 BL 160 is an electrode for air humidity and air temperature measurements - especially suitable for use in bulk materials and solids (eg masonry or screeds). Its areas of application include moisture analysis, damage assessment, monitoring of building drying and testing the readiness of the floor for laying. and wall coverings. The sensor tube has a diameter of 5.5 mm, which also allows measurements in joints without damaging wall or floor tiles. In conjunction with a hydromette, the air humidity in the borehole can be measured and the readiness for laying or the moisture content of certain hardened building materials can be determined using sorption isotherms . For particularly precise measurements, the device should be exposed to the ambient climate to be measured for 10 - 15 minutes so that any temperature differences between the electrode and the surrounding climate can be compensated. Suitable base devices BL UNI 11 CH17

Read more less

Precise thermo-hygrometer for quick measurements of relative humidity and temperature in cavities Using permanently programmed sorption isotherms, weight or mass percentages can be determined for various building and insulation materials as well as for hard and soft wood. The measuring device has a thin, flexible sensor tube (gooseneck) and is therefore particularly suitable for moisture analyses, e.g. damage assessment or building drying. Testing the readiness for laying floor and wall coverings is also one of the possible areas of application.   Features and Benefits • Handy pocket-sized moisture meter for lightning-fast individual or series measurements • Simultaneous display of up to three measured values ​​via the 3-line LCD display, resolution: 0.1 % or 0.1° C • Automatic calculation of dew point temperature, wood moisture equilibrium (UGL) *, absolute humidity in g/m³, enthalpy in kJ/K, wet bulb temperature in °C and water activity (aw) • Sorption isotherms for hard and soft wood as well as for 10 different types of building materials • Min, max and hold function for the measured values • Storage of the last 5 measured values • Automatic device shutdown     Further versions The Hydromette Compact RH-T Flex is also available with a longer gooseneck (350mm instead of 250mm). The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered standard among working instruments among professionals in building drying and water damage drying. They are also recognized by damage experts in insurance companies.    Technical data   Gann Article No.: 31013142 Measuring range: Humidity: 0 – 100 % RH ± 1.8 % RH (10 – 90 % RH) Air temperature: -20 to +70 °C ± 0.5 °C (-10 to +70 °C) sensor tube: 250 x Ø 6.5 mm (gooseneck) Advertisement: device/ambient temperature Automatic saving: last 5 measurements Calibration: Automatically Device shutdown: Automatically Power supply: 9-V block battery (included) Dimensions (L x W x H): 175 x 50 x 30 mm Total length with probe approx. 440mm Weight: 180 gr. Special features: No separate electrodes or cables required 9V block battery included Guarantee: 2 years

Read more less

Precise thermo-hygrometer for quick measurements of relative humidity and temperature in cavities Using permanently programmed sorption isotherms, weight or mass percentages can be determined for various building and insulation materials as well as for hard and soft wood. The measuring device has a thin, flexible sensor tube (gooseneck) and is therefore particularly suitable for moisture analyses, e.g. damage assessment or building drying. Testing the readiness for laying floor and wall coverings is also one of the possible areas of application.   Features and Benefits • Handy pocket-sized moisture meter for lightning-fast individual or series measurements • Simultaneous display of up to three measured values ​​via the 3-line LCD display, resolution: 0.1 % or 0.1° C • Automatic calculation of dew point temperature, wood moisture equilibrium (UGL) *, absolute humidity in g/m³, enthalpy in kJ/K, wet bulb temperature in °C and water activity (aw) • Sorption isotherms for hard and soft wood as well as for 10 different types of building materials • Min, max and hold function for the measured values • Storage of the last 5 measured values • Automatic device shutdown     Further versions The Hydromette Compact RH-T Flex is also available with a longer gooseneck (350mm instead of 250mm). The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered standard among working instruments among professionals in building drying and water damage drying. They are also recognized by damage experts in insurance companies.    Technical data   Gann Article No.: 31013142 Measuring range: Humidity: 0 – 100 % RH ± 1.8 % RH (10 – 90 % RH) Air temperature: -20 to +70 °C ± 0.5 °C (-10 to +70 °C) sensor tube: 350 x Ø 6.5 mm (gooseneck) Advertisement: device/ambient temperature Automatic saving: last 5 measurements Calibration: Automatically Device shutdown: Automatically Power supply: 9-V block battery (included) Dimensions (L x W x H): 175 x 50 x 30 mm Total length with probe approx. 440mm Weight: 180 gr. Special features: No separate electrodes or cables required 9V block battery included Guarantee: 2 years

Read more less

Even at low concentrations, ozone in the ambient air has a high potential for damage. Compliance with safe ozone limits is therefore very important to protect the health of humans and animals. With this measuring device you have the optimal test instrument for quick and precise control or long-term recording of ozone concentrations in the ambient air.   Ozone is a practically colorless gas and is produced naturally or technically. It consists of an unstable compound of 3 "O" atoms (=O3), which decomposes into oxygen (O2) after a relatively short time. In the O3 compound it is strongly oxidizing and disinfecting. It kills germs, bacteria, viruses and odors with 3000 times the power of chlorine treatment. It is therefore used in various areas to disinfect air and surfaces. However, before the treated rooms can be opened to people and animals again, it is important that the ozone value is within the permissible range. This measuring device is used for this purpose.   The device is characterized by very low cross-sensitivity to other gases or VOCs and impresses with fast measurement results with high accuracy even at the smallest ozone concentrations.   Many integrated functions such as the ozone zero adjustment, the reference value measurement option for short-term limit value and time-weighted average value or the switchable value display from ppm to µg/m³ make the fast-reacting measuring device an indispensable aid for the precise determination of ozone pollution. In addition, it is an environmental measuring unit with which air temperature and humidity can also be determined or dew point and wet bulb temperature can be calculated. The dual display of this measuring device always shows you two measured values ​​at the same time at a glance. The device can also be attached to a tripod for long-term measurements. It also has a mini USB port and a 9 V hollow plug socket, so that permanent mains operation is possible via these interfaces as an alternative to using batteries. Last but not least, a power bank can also be connected to the mini USB port for mobile power supply if required.   Advantages at a glance • Fast and precise detection of even very low ozone concentrations • Ozone measurement value display in ppm or µg/m³ • Fast response time • Low cross-sensitivity to VOCs • Ozone zero adjustment function • Ozone reference value measurement (STEL/TWA) • Atmospheric pressure offset for high-precision standard cubic meter measurements • Measurement of air temperature and humidity • Calculation of dew point and wet bulb temperature • Offset setting for air temperature and humidity • Data hold, min, max and alarm function • Display lighting • ¼-inch thread for tripod mount • In addition to battery operation, mains operation is also possible for continuous measurements • Energy-saving auto-shutdown • Calibration certificate included     Diverse application possibilities   • Workplace measurements in industry and commerce • Environmental analyses • Checking production environments • Limit value controls after use of ozone generators for odor neutralization or disinfection, for example in the hotel industry, drinking water treatment and fire and water damage restoration     scope of delivery   • Measuring device • Batteries • Operating instructions • Calibration certificate • Carrying case     Technical data Ozone (O3) measured value ppm min. 0, max. 1 ppm deviation <0.1ppm: ±0.02ppm, or ±10% of the current measured value Ozone (O3) µg/m³ min. o, max. 1,996 (at 20°C and 1,013 hPa) deviation <200 µg/m³: ±40 µg/m³, or ±10% of the current measured value temperature 0 to +50°C resolution 0.1 °C deviation ± 0.6 °C moisture 0 to 99.9 % RH resolution 0.1% RH Deviation 0% - 10% Deviation 10.1% - 70% Deviation 70.1% - 99.9% 5% 3% 5% battery (internal) 4 x AAA 1.5V (included) Weight 185 g Dimensions (L x W x H) 290 x 110 x 80 Trotec article no. 3,510,006,110 guarantee 2 years

Read more less