radiant heaters

This infrared heater is perfect for keeping feet and legs warm under a table. Whether outdoors, in the conservatory or at work. The heat is stored in the table top above, so that a pleasant warmth collects in the leg area. Even when positioned next to or within a seating area, the device radiates its pleasant infrared heat comfortably and evenly at seat height. The infrared technology generates heat immediately, without a long warm-up phase. The heat is distributed evenly around the device. Thanks to its light weight and carrying handle, the heater can be set up or supplied quickly.       Safely protected from rain and dust   Neither damp weather, sudden rain nor dust can harm the robust standing heater. The high-quality aluminum housing is protected against dust deposits, splashes and water jets in accordance with protection class IP55.     Low Glare: Less light, more atmosphere   So that you or your guests can enjoy time outdoors without glare and annoying red light, the spotlight has a long-lasting low-glare infrared tube with 80% less light emission, while maintaining high heat efficiency. The reduced proportion of red light creates a cozy candlelight atmosphere - ideal for cozy, warm evenings under a starry sky.   The high-quality carbon infrared tube generates heat based on the natural principle of solar radiation. And it is particularly energy efficient, as a large proportion of the energy used is converted into direct heat. It is not the air that is heated, but the objects and people in the immediate vicinity absorb the radiant heat, store it and release it back into their surroundings as secondary radiation. This heat distribution, which is based on nature, is carried out silently and without stirring up dust by a fan, which means that asthmatics, allergy sufferers and people with sensitive airways in particular can breathe in and out freely.     Enjoy warmth without fear of contact   In contrast to other heating solutions, the infrared heater is particularly safe. A close-meshed metal grid protects the carbon infrared heating tube from curious children's fingers, contact with legs or feet, and protects pets. In addition, a high-quality velour coating reduces the surface temperature of the protective grid, so that even direct contact does not pose an immediate danger.     Stable and stable in every situation   The plate-shaped base (Ø 20 cm) ensures a secure stand. The optimized weight distribution with a low center of gravity provides additional protection against tipping, so that tipping over is almost impossible when used properly. If the standing heater is accidentally knocked over, the integrated tilt switch automatically deactivates the stable device.     Fast commissioning   After the simple and quick assembly of the stand, this heater only needs to be set up and plugged in.     Advantages at a glance   • Infrared heat without preheating • Even heat distribution (360°) • Heating power 1200 W • Glare-free heat thanks to high-quality low glare carbon infrared tube – approx. 5500 hours of light with 80% light reduction • High-quality aluminum design housing • Protection against burns thanks to the high-quality velour coating of the protective grille of the infrared heating tube • Rainproof and protected against the ingress of foreign bodies, protection class IP55 • Space-saving column design with round base • Fits perfectly under the table to warm your legs • Clean, condensation-free and odorless heat – without any noise • No dust turbulence, therefore suitable for allergy sufferers • Tilt switch integrated in the device • Energy-efficient conversion of electricity into heat     Technical data   heating output 1200W on/off switch yes, single-stage heating type Short-wave infrared heat waves, low-glare tubes effective area approx. 5 m² voltage 220 - 240 V/50 Hz nominal current consumption max. 5.2 A Recommended coverage 10 A cable length approx. 1.8 m Plug EU plug with Swiss fixed adapter Dimensions W x H x D 200 x 650 x 200 mm (including stand) Weight 3 kg protection class IP55 (dust and water jet protected) remote control no LED display no parental controls anti-tip protection, velour-coated surface timer no Trotec article number: 1,410,003,908 guarantee 2 years    

Read more less

Fast all-round heat for your home, conservatory or office   This heater heats effectively and quickly. Whether as additional heating in the apartment or generally for poorly heated rooms during the cold season. With a heating output of 2000 watts, it provides rooms up to 24 m² or 60 m³ with pleasant, comfortable temperatures - ideal, for example, in the living room, bedroom, children's room, holiday apartment, hobby room, party room, office, sales rooms or your conservatory.     Perfect combination of convection heat and infrared radiation   In contrast to many other heaters or radiators, the heat from this heat wave heater is not only emitted into the room from one direction. Instead, the combination of convection heating and mica infrared heating elements ensures that the heating can be felt all around. In addition, the heating elements heat up particularly quickly, so that the heat emission can be felt within just a few seconds. It is best to set up the device in the middle of the room so that you benefit from the even and fast 3D heat distribution. You can find out more about the functional principle of the heat wave heater below.     Thermostat control for high comfort and low energy consumption   Using the remote control and the intuitive membrane keypad, you can quickly and easily select 2 heating levels (1200 watts and 2000 watts). The current room temperature is always shown on the LCD display.   You can adjust the heating output to your room temperature optimally thanks to intelligent temperature control via thermostat. Simply enter your desired target room temperature in the range of 15 °C to 35 °C. The heater will now heat the room until the preselected temperature is reached and then switch off automatically. As soon as additional heating is required, operation starts again automatically so that the room temperature is kept constant. This process is particularly efficient and energy-saving because only as much heating is used as is necessary to ensure pleasant, comfortable warmth.     Quiet and dust-free heat   In contrast to electric fan heaters, this model does not have a fan and therefore does not stir up any dust in the room. This is particularly pleasant, not only for allergy sufferers and asthmatics. It also generates its heat completely silently, so it is recommended for use in the bedroom, for example. This means you can sleep relaxed and restful even in very cold rooms, for example if you are spending the first night in a holiday home that has not been used for a long time.     Timer function – programmable on and off   The practical 24-hour timer on the comfort heater is both convenient and energy-saving. If desired, the device can be switched on or off fully automatically after a set time (1-24 hours). For example, you can set the heater in the bedroom to switch itself off after you have fallen asleep. Or you can preheat the kitchen in the morning so that you can enjoy your coffee in the warmth.     A lot of security   To ensure safe heating operation, the heat wave heater is equipped with an overheating protection system that automatically switches the device off if there is a risk of heat build-up. The stable heater is also well protected against accidental tipping over, e.g. by pets, careless guests or boisterous children, because the integrated tilt switch immediately deactivates operation if it is tilted.     How do these heat wave heaters work?   The 3D heating system of this heater cleverly combines the advantages of a convector and an infrared heater, providing real all-round warmth in no time:   Efficient mica heating technology with mica plates: The 3-layer mica heating plates made of natural mica ore generate pleasant infrared radiant heat in a very short time, which, unlike conventional radiant heaters, is not only emitted from one direction but also to the front and back at the same time. Another advantage of the high-quality mica heating elements is that they heat the entire surface evenly. The intensive radiant heat is generated over the entire surface, without loss of power and without oxygen consumption. In addition, warm air rises from the hot mica heating elements. This creates a gentle air flow that distributes the heat even further throughout the room. This principle is called convection.   Room-filling warmth based on the principle of the sun: Infrared radiation works based on the natural principle of the sun. It does not heat the air, but rather the surfaces of the objects it hits. The objects store the heat and gradually release it back into the room, so that the heat continues to have an effect even when the heat wave heater has already been switched off. On the skin, infrared radiation creates the pleasant feeling of natural solar warmth.   Plus points: The pleasant warmth takes effect immediately and without any warm-up time throughout the room and does not have to be transported through the circulating air. The infrared radiation and the convection heat complement each other to create a three-dimensional all-round heating system. The heat radiated upwards, forwards and backwards heats the entire room evenly. For quick, comfortable warmth throughout the entire room - right into the furthest corner.     Healthy indoor climate Breathe healthily with the Stop-DryAir function: You no longer have to worry about overly dry heating air. In contrast to conventional heating technologies, where heating inevitably leads to a reduction in the humidity in the room, with the heat wave heating principle the existing humidity in the room to be heated remains constantly at the same level.   Especially in the cold autumn and winter months, the body finds cool temperatures unpleasant. Then the infrared heat lies on the skin like a soothing heat patch. The circulation and metabolism are stimulated, which in turn can have a soothing effect on muscle pain and the musculoskeletal system.     Striking black design The appearance also plays a big role, after all, the cool black heat wave heater is often the focal point of your room. The high-quality workmanship and the robust retro charm of the black metal grille set a striking design accent in your room ambience.     Rollable, compact and easy to transport   Thanks to its compact dimensions, the integrated smooth-running castors and the practical handles, the heater can be moved or carried quickly and easily from one room to another. This means you remain flexible and can use it in the office, in residential and business premises or, for example, in the wellness area. The integrated cable winder keeps things tidy during transport and storage and prevents tripping hazards.     Advantages at a glance   • Up to 2,000 W heating output for clean, condensation-free and odorless heat • 2 heating levels (1200 W / 2000 W) • 3D all-round heating system: combination of infrared radiation and convection heat • High-quality mica heating technology with mica plates • Thermostat-controlled automatic operation with target value pre-selection between 15 °C and 35 °C • Automatic temperature control • Current room temperature display • Stop-DryAir: no drying out of the room air • Timer function • IR remote control • LCD display • Energy-efficient operation thanks to automatic shutdown when target value is reached • Maximum safety thanks to overheating and tipping protection • Easy transport thanks to handles and integrated wheels • Silent heating Please note: The device is only suitable for use in well-insulated rooms or for occasional use     Technical data   heating output 1200W / 2000W heating type convection and infrared heat waves Maximum room size 24 m² (60 m³) temperature range 15 - 35 °C voltage 220 - 240 V/50 Hz nominal current consumption max. 8.7 A power consumption max. 2000W Recommended coverage 10 A cable length approx. 1.2 m Plug EU plug with Swiss adapter Dimensions W x H x D 640 x 660 x 260 mm (including feet) Weight 5 kg protection class IPX0 on/off switch yes, plus step switch 1200W - 2000W thermostat control Yes LCD display Yes frost guard function no Auto-shutdown at target value Yes parental controls no timer yes (1-24 hours) memory function yes (values ​​are saved, operation on timer possible) anti-tip device Yes overheating protection Yes guarantee 2 years

Read more less

These infrared panels are ideal for providing previously unheated rooms with an effective heat source or for generating heat in specific areas, such as at the workplace, on the sofa or in the bathroom. The gentle heat waves are absorbed by solid materials such as furniture or walls, but also by people, and provide a pleasant warmth. Very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors. While traditional heaters have to heat the entire room, heating panels can be used to specifically heat desired areas. This saves a lot of energy and therefore costs.   application examples   Heating of living spaces: Whether living area, conservatory or bathroom, as a local additional heating system, the infrared flat heater creates heat directly where the residents need it. It can be mounted on the wall to save space and only needs a standard socket for heating operation. Use in the catering industry: As a freestanding or wall-mounted device, the heating plate is the optimal solution for the targeted heating of sales stands or terrace areas and is much more effective than conventional gas heaters. Faster drying of wall surfaces: When drying out or renovating buildings, infrared heating of suitable wall building materials causes capillary moisture transport towards the heated wall surface due to the temperature gradient, which, in contrast to diffusion, can transport significantly more moisture out of the wall in a shorter time. In plain English: drying is faster when the damp wall is illuminated with infrared waves. Workplace heating: With the optionally available feet, the heater can be placed vertically or horizontally anywhere for targeted heating. Ideal for cool workplaces, for example in the warehouse, behind refrigerated counters, in workshops or in large halls     Advantages at a glance   • Efficient heating process with environmentally friendly IR-C radiation • Heat transport via light waves - direct object heating without convective loss • Maximum efficiency: 100% of the electrical energy used is converted into heat output • Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust turbulence • Integrated hanging device for mounting on wall or mounting supports • Can also be used as a stand-alone device (suitable stands are available from us as accessories) • Ready to use - no additional installations or expensive modifications required   The ErP table for this heater can be found above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of power requirements for rooms up to 2.5 m ceiling height insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² each additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows: Area of ​​the room in m² x W/m² = required heating output in watts. Calculation example: For a room size of 10 m² with very good insulation quality and two external walls (50 + 10 W/m²), the recommended power requirement is 10 m² x 60W/m² = 600 W.       Technical data   heating output 450W heating type infrared heat waves Suitable room temperature 0 - 60 °C heating surface 0.43 m² heating levels 1 voltage 220 - 240 V/50 Hz nominal current consumption max. 2 A power consumption max. 0.45 kW housing aluminum cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 705 x 605 x 22 mm (without feet) Weight 4 kg protection class IP54 overheating protection Yes Trotec article no. 1,410,003,010 guarantee 2 years

Read more less

A pretty eye-catcher for cooler evenings on the veranda and in the winter garden. The device impresses with its very robust workmanship made of metal and fire-retardant plastic. Two highly effective carbon heating tubes with low glare and two heating levels (600 + 1200 watts).  Features & Benefits • Two heat settings selectable: 600 watts / 1200 watts • 180° rotation function • With carrying handle and therefore easy to move and/or put away • Suitable for outdoor use • Equipped with two individual carbon heating tubes, which have a low glare effect • High-quality workmanship made of metal and fire-retardant plastic • Protection class IP54, means protected against dust in harmful quantities and protected against splash water • Silent operation • Cable length: 180 cm usage examples Heat generation: terraces, balconies, winter gardens, workplaces, restaurants, tents, pavilions, workshops, garages, warehouses, cellars, sheds, gardens and for use in party areas and for hobbies etc. Technical data    operating voltage 220V-240V / 50-60Hz Max. power consumption 1200 W heating levels 600 W / 1200 W heating elements 2 carbon heating tubes Product dimensions (H x W x D) 600 x 300 x 300 mm protection class IP54 (protected against dust in harmful quantities and protected against splash water) Weight 5.3 kg scope of delivery Lantern, power cable EU plug with Swiss fixed adapter, operating instructions guarantee 2 years

Read more less

The 200LS radiant heater is an inexpensive but high-quality infrared heater. It can be attached to the ceiling using the chain provided, similar to a lampshade, and thus provides warmth from above. It is ideal if, for example, a cozy table on the balcony or workstations in the basement, workshop or production halls need to be heated in specific areas. The 200LS has protection class IP24. This means that it is protected against splash water and is therefore suitable for both indoor and protected outdoor areas. The infrared heat is generated very quickly and is transmitted through heat waves, which keep people and objects warm. The heat is immediately noticeable even in windy and draughty conditions and is distributed downwards at an angle of 150°, which means that with a normal room height of around 2.5m, this means a radius of around 2-3 meters. Heater: The spotlight has 2 heating tubes of 1000W each, which can be switched on individually or together. The heating intensity can be set to 1000W or 2000W by pressing a button on the device itself or using the remote control included in the delivery. During operation, the heating tubes emit not only heat but also a bright light, which also provides sufficient light for the heated zone. LED light: The 200LS also has an LED lamp that can be switched on independently of the heating mode. It emits a subtle white light downwards. The luminosity of the heating tubes is stronger than that of the LED light, so the lamp is particularly useful when no heating is being used. The device is made almost entirely of metal and impresses with its very robust workmanship. Features & advantages over other heaters: • Equipped with two individual heating tubes • IP24 - therefore suitable for indoor and outdoor use • Heating power selectable 1000 watts or 2000 watts • Integrated, separately switchable LED lamp as a light source even without heating • High-quality workmanship, mostly made of metal • Includes remote control for selecting the heating level and for switching the LED light on/off. • Heat transfer without a fan using infrared technology, provides warmth even in drafts. • Silent operation • Compliance with WEEE standards • “GS” tested and of course with CE and EMC conformity Examples of use: For keeping warm the workplace, terraces, balconies, winter gardens, restaurants, tents, pavilions, workshops, agriculture, garages, warehouses, cellars, sheds, gardens and for use at work and for hobbies etc. 2-year warranty Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, other shipping options can be found in the shopping cart) Technical data Voltage: 220V-240V / 50Hz (normal household socket) Max. consumption: 2000 W Heating levels: 2 (1000 W / 2000 W) Dimensions (H/W/D): 265 x 430 x 430 mm Protection class: IP24 (protected against foreign bodies >12.5 mm and against splash water) Weight: 3.5 kg

Read more less

Good heating performance with small space requirements   This matt black infrared heater is compact in shape and size. It is suitable for quickly heating balconies, terraces, trade fair and market stands, outdoor events, seating and standing areas in outdoor restaurants and similar areas that require little space. Whether in the cold winter, in spring when temperatures are still cool or on unexpectedly cool summer nights - this heater with digital display and remote control enriches outdoor areas all year round with pleasant summer temperatures without taking up much space.     Easy operation   The lightweight heater is easy to use and offers maximum functionality and heat intensity. It floods 8 - 14 m² areas with targeted, instant heat, either at the touch of a button on the device itself or via remote control. In contrast to conventional halogen heating tubes, the high-quality carbon infrared tube emits 80 percent less red light, but more pleasant infrared heat. The expected lifespan of this tube is around 10,000 operating hours.     Can be used as a wall or ceiling heater   As a wall and ceiling heater, the heater warms seating groups, standing tables and outdoor lounge areas with odorless heat without any preheating time. For easy installation of the carbon heater, a bracket that can be swiveled by 45°, including screws and dowels, is included in the delivery. The approx. 1.80 m long cable can be used to reach nearby sockets.     pleasant warmth   The pleasant infrared heat of the infrared heater can be felt on the skin immediately after switching it on. To adjust the heat intensity as required, the device has four heating levels with 800 watts, 1200 watts, 1600 watts and 2000 watts of heat output, which can be selected via the integrated control panel or the remote control provided.     Plannable heat outdoors   The heater has a practical 24-hour timer for energy-saving programming of a predefined operating time. Once set, the heater switches off automatically after a predefined number of hours (1-24 hours). This reduces unnecessary operating costs and makes it particularly easy to use in commercial applications.     Safe and Weatherproof   For maximum safety, the infrared heater has a self-triggering overheating protection. If the maximum permissible operating temperature of the heater is exceeded, a safety thermostat switches operation off fully automatically. Another plus point - especially for professional use in the catering industry - is the designer aluminum housing constructed to protection class IP55, which means that the jet-proof infrared heater reliably withstands wind and rain.     Infrared heat: As pleasant as the sun   The radiator heats its immediate surroundings using the natural principle of the sun. Unlike devices with heating wires, the infrared rays do not heat the surrounding air, but only the surfaces and people they hit. The objects illuminated (e.g. furniture, walls and ceilings) absorb the heat and store it, then gradually release it again. The objects thus serve as additional energy and heat storage - even when the device is switched off, which further increases the efficiency. The heat radiation creates a pleasant feeling of warm sun rays on the skin in summer.   Everyone perceives temperatures differently. Our individual perception of heat is influenced, for example, by the distance from the heat source. The closer the distance to the heater, the smaller the area illuminated - the greater the distance to the heater, the larger the area illuminated. The 2000 watt carbon tube is recommended for outdoor areas of around 8 m² in cold environments or 14 m² in slightly temperate environments.     No disturbing emissions   In contrast to electric heaters, the clean and condensation-free instant heat is generated without dust turbulence, annoying noises and unpleasant smells.     Low Glare: 100% heat, 80% less light   Conventional infrared heaters without low glare technology often emit an intense orange-reddish light along with the heat radiation, which many people find warm and cozy. However, to ensure that the surroundings are not illuminated too brightly or even disturbed, the IR 2005 from Trotec has a carbon infrared tube with light-reducing low glare technology.   Advantages of Low Glare Technology Romantic candlelight atmosphere: Low glare shortwaves produce a larger proportion of infrared light from the invisible light range - and do so without reducing the heating output. In addition, the infrared radiation is concentrated using an innovative coating process on the tubes, which reduces scattering losses. Overall, Trotec carbon heaters with low glare technology therefore achieve a brightness reduction of up to 80% with an expected service life of around 10,000 hours.   Full heat output with less brightness: Since the perceptible light is significantly reduced, the immediate vicinity of the heater creates the impression of a cozy candlelight atmosphere and the ambience is noticeably more pleasant. An existing lighting concept on the terrace or in the restaurant is overall less affected.   Note: Low glare carbon heating tubes look just as intensely reddish as conventional infrared heaters without low glare. In reality, however, they emit 80% less visible light. With the same heat output - for more comfort and romance.     Advantages at a glance   infrared heat without preheating • Four heat settings, up to 2000 watts of heat output • High-quality carbon infrared tube – approx. 10,000 hours of light with 80% light reduction • Even and targeted heat distribution • Clean, condensation-free, odorless and completely noise-free • No dust turbulence, therefore suitable for allergy sufferers • Protection class IP55 – jet-proof professional device • 24-hour timer for fully automatic shutdown • LED display • Robust aluminum housing • Adjustable 45° tilt angle – with large field of action • Suitable for wall and ceiling mounting • Infrared remote control • Integrated hanging device • Energy efficient         Technical data   heating output 2000W heating levels 800 / 1200 / 1600 / 2000W heating type infrared heat waves heating tube Carbon, Low Glare effective area max. 14 m² voltage 220 - 240 V/50 Hz nominal current consumption max. 8.6 A power consumption max. 2000W Recommended coverage 10 A cable length approx. 1.8 m Plug EU plug with Swiss fixed adapter Dimensions W x H x D 900 x 175 x 105 mm Weight 3 kg protection class IP55 on/off switch Yes overheating protection Yes display no frost guard function no parental controls no timer yes, 1-24 hours Housing aluminum remote control Yes tripod optionally available Trotec article no. 1,410,003,208 guarantee 2 years

Read more less

These infrared panels are ideal for providing previously unheated rooms with an effective heat source or for generating heat in specific areas, such as at the workplace, on the sofa or in the bathroom. The gentle heat waves are absorbed by solid materials such as furniture or walls, but also by people, and provide a pleasant warmth. Very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors. While traditional heaters have to heat the entire room, heating panels can be used to specifically heat desired areas. This saves a lot of energy and therefore costs.   application examples   Heating of living spaces: Whether living area, conservatory or bathroom, as a local additional heating system, the infrared flat heater creates heat directly where the residents need it. It can be mounted on the wall to save space and only needs a standard socket for heating operation. Use in the catering industry: As a freestanding or wall-mounted device, the heating plate is the optimal solution for the targeted heating of sales stands or terrace areas and is much more effective than conventional gas heaters. Faster drying of wall surfaces: When drying out or renovating buildings, infrared heating of suitable wall building materials causes capillary moisture transport towards the heated wall surface due to the temperature gradient, which, in contrast to diffusion, can transport significantly more moisture out of the wall in a shorter time. In plain English: drying is faster when the damp wall is illuminated with infrared waves. Workplace heating: With the optionally available feet, the heater can be placed vertically or horizontally anywhere for targeted heating. Ideal for cool workplaces, for example in the warehouse, behind refrigerated counters, in workshops or in large halls     Advantages at a glance   • Efficient heating process with environmentally friendly IR-C radiation • Heat transport via light waves - direct object heating without convective loss • Maximum efficiency: 100% of the electrical energy used is converted into heat output • Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust turbulence • Integrated hanging device for mounting on wall or mounting supports • Can also be used as a stand-alone device (suitable stands are available from us as accessories) • Ready to use - no additional installations or expensive modifications required   The ErP table for this heater can be found above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of power requirements for rooms up to 2.5 m ceiling height insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² each additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows: Area of ​​the room in m² x W/m² = required heating output in watts. Calculation example: For a room size of 10 m² with very good insulation quality and two external walls (50 + 10 W/m²), the recommended power requirement is 10 m² x 60W/m² = 600 W.       Technical data   heating output 580W heating type infrared heat waves Suitable room temperature 0 - 60 °C heating surface 0.54 m² heating levels 1 voltage 220 - 240 V/50 Hz nominal current consumption max. 2.6 A power consumption max. 0.58 kW housing aluminum cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 905 x 605 x 22 mm (without feet) Weight 5 kg protection class IP54 overheating protection Yes Trotec article no. 1,410,003,012 guarantee 2 years

Read more less

The 210S radiant heater is a powerful infrared heater with a stylish industrial look. It can be attached to the ceiling using the chain provided, similar to a lampshade, and thus provides warmth from above. It is ideal if, for example, a cozy table on the balcony or workstations in the basement, workshop or production halls need to be heated in specific areas. The heater has protection class IP54 - that means protection against splash water - and is therefore also suitable for outdoor use. The infrared heat is generated very quickly and is transmitted through heat waves, which keep people and objects warm. The heat is immediately noticeable, even in windy or draughty conditions, and is distributed downwards at an angle of 150°, which means that with a normal room height of around 2.5m, this means a radius of around 2-3 meters. Heater: The 210S is equipped with two powerful carbon heating tubes, which have a significantly lower glare effect than conventional heating tubes. The heating output can be selected in three levels: 900W / 1200W / 2100W. The heating intensity can be adjusted by pressing a button on the device itself, but also using the remote control included in delivery. The device is made almost entirely of metal and impresses with its very robust workmanship. Features & advantages over other heaters : • Equipped with two individual heating tubes • IP54 - suitable for indoor and outdoor use • Three heat settings 900 / 1200 / 2100 W (fits into normal household socket) • High-quality workmanship, mostly made of metal • Incl. remote control for selecting the heating level and for switching on/off • Heat transfer without a fan using infrared technology, provides warmth even in drafts. • Silent operation • Compliance with WEEE standards • “GS” tested and of course with CE and EMC conformity Examples of use: For keeping warm the workplace, terraces, balconies, winter gardens, restaurants, tents, pavilions, workshops, agriculture, garages, warehouses, cellars, sheds, gardens and for use at work and for hobbies etc. 2-year warranty Technical data Voltage: 220V-240V / 50Hz (normal household socket) Max. consumption: 2100 W Heating levels: 3 (900 W / 1200 W / 2000 W) Heating tubes: 2 carbon heating tubes Housing: metal, painted light grey Dimensions (H/W/D): 310 x 475 x 475 mm Protection class: IP54 (protected against dust in harmful quantities and against splash water) Weight: 3.5 kg

Read more less

This heater is ideal for quickly warming up seats on terraces, in lounges, sports halls or conservatories, so that the cosy gathering is not abruptly ended by the cold. Thanks to its slim, attractive design, this heater is not only a source of heat, but also fits decoratively into the interior design.     Can be used as a wall and ceiling heater   A bracket supplied allows the heater to be attached horizontally or vertically to the wall or ceiling. The 45° swivel joint allows the heat rays to be precisely directed at seating or table areas. An easy-to-install rope system with a quick-screw connection is also included in the delivery. This allows the heater to be hung lower from the ceiling. The installation itself is easy with minimal manual skill.     feel-good atmosphere at the touch of a button   The pleasant infrared heat can be felt on the skin immediately after switching it on. To adjust the heat intensity, the radiator has two heat settings with 1100 watts or 2200 watts, which can be set at the touch of a button directly on the device or using the remote control provided. When mounted on the ceiling, the height is also crucial in determining how much the area below is warmed and how wide the heat rays spread. The lower the radiator, the warmer and smaller the illuminated area becomes. In lounges, a height of around 2.30 - 2.50m is considered comfortable.     Infrared heat: As pleasant and natural as the sun   Infrared heats the immediate environment based on the natural principle of the sun. Unlike devices with heating wires, infrared rays do not heat the ambient air, but only the surfaces and people they hit. The objects illuminated (e.g. furniture, walls and ceilings) absorb the heat and store it, then gradually release it again. The objects thus serve as additional energy and heat storage - even when the device is switched off, which further increases the efficiency. The heat radiation creates a pleasant feeling of warm sun rays on the skin in summer.   The strong heating level (2200 watts) covers an outdoor area of ​​approximately 9 m² (in cool environments) or a maximum of 15 m² in a slightly temperate, wind-protected environment.   Allergy sufferers and people with sensitive respiratory tracts in particular will find the benefits of infrared heaters soothing. In contrast to electric heaters, the clean and condensation-free instant heat is generated without stirring up dust, annoying noises and unpleasant smells.     Low Glare: 100% heat, 80% less light   Conventional infrared heaters often emit an intense orange-reddish light, which many people find warm and cozy, but sometimes also glaring. To ensure that the surroundings are not illuminated too brightly, this heater has two shortwave infrared tubes with light-reducing Low Glare technology. Advantages of Low Glare technology:   Romantic candlelight atmosphere: Low glare shortwaves produce a larger proportion of infrared light from the invisible light range. The infrared radiation is concentrated by an innovative coating process on the tubes, which reduces scattering losses. Overall, low glare heating tubes achieve a light reduction of up to 80% compared to conventional technology and have a service life of around 6000 hours.   Full heat output with less brightness: Since the perceptible light is significantly reduced, the immediate vicinity of the heater creates the impression of a cozy candlelight atmosphere and the ambience is noticeably more pleasant. An existing lighting concept on the terrace or in the restaurant is overall less affected.     Advantages at a glance   • Instant heat without preheating • Even and targeted heat distribution • Clean, condensation-free, odorless and noiseless • No dust turbulence, therefore suitable for allergy sufferers • 2 heat settings 1100W / 2200 Watt • Remote control • Elegant design • Weather-resistant aluminum-plastic housing • High-quality low glare shortwave infrared tubes – approx. 6000 hours of light with 80% less light • Adjustable 45° tilt angle – with large field of action • Can be used in the covered outdoor area • LED display • Operating indicator light • Suitable for wall and ceiling mounting • Energy efficient     information video about infrared heaters     Technical data   heating output max. 2200W on/off switch yes, step switch OFF - 1000W - 2000W heating type Short-wave infrared heat waves, low-glare tubes effective area 9 - 15 m² voltage 220 - 240 V/50 Hz nominal current consumption max. 9.5 A Recommended coverage 10 A cable length approx. 1.8 m Plug EU plug with Swiss fixed adapter Dimensions W x H x D 1039 x 78 x 78 mm Weight 2.5 kg protection class IP66 (dust and water jet protected) Recommended distance from flammable materials side/top 50cm, bottom 180cm) remote control yes (2 x AAA batteries 1.5V) LED display Yes parental controls no timer no Trotec article number: 1,410,003,215 guarantee 2 years

Read more less

These infrared panels are ideal for providing previously unheated rooms with an effective heat source or for generating heat in specific areas, such as at the workplace, on the sofa or in the bathroom. The gentle heat waves are absorbed by solid materials such as furniture or walls, but also by people, and provide a pleasant warmth. Very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors. While traditional heaters have to heat the entire room, heating panels can be used to specifically heat desired areas. This saves a lot of energy and therefore costs.   application examples   Heating of living spaces: Whether living area, conservatory or bathroom, as a local additional heating system, the infrared flat heater creates heat directly where the residents need it. It can be mounted on the wall to save space and only needs a standard socket for heating operation. Use in the catering industry: As a freestanding or wall-mounted device, the heating plate is the optimal solution for the targeted heating of sales stands or terrace areas and is much more effective than conventional gas heaters. Faster drying of wall surfaces: When drying out or renovating buildings, infrared heating of suitable wall building materials causes capillary moisture transport towards the heated wall surface due to the temperature gradient, which, in contrast to diffusion, can transport significantly more moisture out of the wall in a shorter time. In plain English: drying is faster when the damp wall is illuminated with infrared waves. Workplace heating: With the optionally available feet, the heater can be placed vertically or horizontally anywhere for targeted heating. Ideal for cool workplaces, for example in the warehouse, behind refrigerated counters, in workshops or in large halls     Advantages at a glance   • Efficient heating process with environmentally friendly IR-C radiation • Heat transport via light waves - direct object heating without convective loss • Maximum efficiency: 100% of the electrical energy used is converted into heat output • Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust turbulence • Integrated hanging device for mounting on wall or mounting supports • Can also be used as a stand-alone device (suitable stands are available from us as accessories) • Ready to use - no additional installations or expensive modifications required   The ErP table for this heater can be found above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of power requirements for rooms up to 2.5 m ceiling height insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² each additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows: Area of ​​the room in m² x W/m² = required heating output in watts. Calculation example: For a room size of 10 m² with very good insulation quality and two external walls (50 + 10 W/m²), the recommended power requirement is 10 m² x 60W/m² = 600 W.       Technical data   heating output 700W heating type infrared heat waves Suitable room temperature 0 - 60 °C heating surface 0.72 m² heating levels 1 voltage 220 - 240 V/50 Hz nominal current consumption max. 3.2 A power consumption max. 0.70 kW housing aluminum cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 605 x 22 mm (without feet) Weight 6 kg protection class IP54 overheating protection Yes Trotec article no. 1,410,003,014 guarantee 2 years

Read more less

This infrared heating panel / heating wall produces very energy-saving heating thanks to the latest technology. It can be used free-standing or mounted on a wall or ceiling. Infrared heating panels produce a pleasant heat wave energy (deep heat), which is mostly absorbed by the walls and objects in the room. Only a fraction (approx. 15%) of this is not absorbed and is reflected back. The heat wave energy absorbed by ceilings, walls, floors and objects is then released back into the environment in the form of heating energy, creating a pleasant warm climate with extremely low electricity consumption compared to conventional forms of heating. This infrared heater is available in two different strengths: with 350W or 900W heating power (see the corresponding offer in our shop). In contrast to conventional heaters or fan heaters, infrared heaters can be used to supply heat to specific areas without having to heat the rest of the room. For example, to heat a workplace, the seating area in the living room, etc. The heat can be felt after just a few minutes. This infrared heating panel is also ideal for drying damp or wet walls, ceilings or objects, because around 85% of the heat is released directly into the wall, ceiling or object, without prior convection loss, and this means that the moisture is pushed out many times faster than with other methods. WDH® is a quality product or a brand that is almost exclusively available from specialist retailers. WDH® air conditioning units have made an excellent name for themselves in recent years for high-quality devices. Quality standards include, for example: durability, compliance with the specified performance, of course with CE conformity, recyclable materials, etc. We are the general representative for WDH units in Switzerland and generally stock the products from stock. With us you get a branded product and, of course, comprehensive customer service, even after the warranty period has expired. Features & Benefits: ? Powerful IR heating plate with at least 350 watts ? High-quality stainless steel heating plate with aluminum frame ? Two aluminum feet (for freestanding) and a mounting kit (for wall mounting) are included in delivery ? Heat transfer without air movement and without any oxygen consumption ? Absolutely silent operation ? Very low consumption costs compared to other forms of heating ? Automatic overheating protection ? Service promise/collection guarantee: In the unlikely event of a complaint, the device will be picked up from you by UPS and checked/repaired in our own workshop ? No maintenance required and easy to clean (just wipe down). ? Very slim design and lightweight construction. In addition, very attractive exterior ? High mobility (plug & play) and easy quick assembly. Miscellaneous: - This infrared heating plate is passively controlled. This means that you simply plug it into the socket and the heating plate works independently. This means that the heating is either on or off. Temperature or time control is not possible or would have to be supplemented with a separate timer or temperature controller if required. In extreme cases, the heating plate of the device can reach temperatures of up to 125°C, but the automatically controlled heating plate temperature is on average 80 – 105°C. It is recommended to ensure that small children or animals cannot come into contact with the heating plate. Examples of use: Room heating: Ideal for supporting and energy-saving room heating. Often sufficient as the only heat source for rooms of up to 8 m2 Drying: Ideal for faster drying of walls, ceilings, floors and objects. Economical heating/drying of basement rooms. Damage repair: After flooding or after damage caused by fire-fighting water. These devices are ideal for supporting the drying process. 2-year warranty Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, other shipping options can be found in the shopping cart) (akd) Technical data Voltage: 230V / 50Hz Power consumption: max. 475W Wavelength: 8 – 15 µm = mid infrared, IR-C waves Dimensions without feet (H/W/D): 60 x 60 x 3 cm Weight: 3.8 Kg Operating setting: Passive control (i.e. plug plugged in ON, unplugged OFF) Application area: up to max. 8m² Swiss plug: Yes Warranty: 2 years

Read more less

These infrared panels are ideal for providing previously unheated rooms with an effective heat source or for generating heat in specific areas, such as at the workplace, on the sofa or in the bathroom. The gentle heat waves are absorbed by solid materials such as furniture or walls, but also by people, and provide a pleasant warmth. Very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors. While traditional heaters have to heat the entire room, heating panels can be used to specifically heat desired areas. This saves a lot of energy and therefore costs.   application examples   Heating of living spaces: Whether living area, conservatory or bathroom, as a local additional heating system, the infrared flat heater creates heat directly where the residents need it. It can be mounted on the wall to save space and only needs a standard socket for heating operation. Use in the catering industry: As a freestanding or wall-mounted device, the heating plate is the optimal solution for the targeted heating of sales stands or terrace areas and is much more effective than conventional gas heaters. Faster drying of wall surfaces: When drying out or renovating buildings, infrared heating of suitable wall building materials causes capillary moisture transport towards the heated wall surface due to the temperature gradient, which, in contrast to diffusion, can transport significantly more moisture out of the wall in a shorter time. In plain English: drying is faster when the damp wall is illuminated with infrared waves. Workplace heating: With the optionally available feet, the heater can be placed vertically or horizontally anywhere for targeted heating. Ideal for cool workplaces, for example in the warehouse, behind refrigerated counters, in workshops or in large halls     Advantages at a glance   • Efficient heating process with environmentally friendly IR-C radiation • Heat transport via light waves - direct object heating without convective loss • Maximum efficiency: 100% of the electrical energy used is converted into heat output • Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust turbulence • Integrated hanging device for mounting on wall or mounting supports • Can also be used as a stand-alone device (suitable stands are available from us as accessories) • Ready to use - no additional installations or expensive modifications required   The ErP table for this heater can be found above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of power requirements for rooms up to 2.5 m ceiling height insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² each additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows: Area of ​​the room in m² x W/m² = required heating output in watts. Calculation example: For a room size of 10 m² with very good insulation quality and two external walls (50 + 10 W/m²), the recommended power requirement is 10 m² x 60W/m² = 600 W.       Technical data   heating output 900W heating type infrared heat waves Suitable room temperature 0 - 60 °C heating surface 0.91 m² heating levels 1 voltage 220 - 240 V/50 Hz nominal current consumption max. 3.9 A power consumption max. 0.90 kW housing aluminum cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 755 x 22 mm (without feet) Weight 7.5 kg protection class IP54 overheating protection Yes Trotec article no. 1,410,003,016 guarantee 2 years

Read more less

These infrared panels are ideal for providing previously unheated rooms with an effective heat source or for generating heat in specific areas, such as at the workplace, on the sofa or in the bathroom. The gentle heat waves are absorbed by solid materials such as furniture or walls, but also by people, and provide a pleasant warmth. Very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors. While traditional heaters have to heat the entire room, heating panels can be used to specifically heat desired areas. This saves a lot of energy and therefore costs.   application examples   Heating of living spaces: Whether living area, conservatory or bathroom, as a local additional heating system, the infrared flat heater creates heat directly where the residents need it. It can be mounted on the wall to save space and only needs a standard socket for heating operation. Use in the catering industry: As a freestanding or wall-mounted device, the heating plate is the optimal solution for the targeted heating of sales stands or terrace areas and is much more effective than conventional gas heaters. Faster drying of wall surfaces: When drying out or renovating buildings, infrared heating of suitable wall building materials causes capillary moisture transport towards the heated wall surface due to the temperature gradient, which, in contrast to diffusion, can transport significantly more moisture out of the wall in a shorter time. In plain English: drying is faster when the damp wall is illuminated with infrared waves. Workplace heating: With the optionally available feet, the heater can be placed vertically or horizontally anywhere for targeted heating. Ideal for cool workplaces, for example in the warehouse, behind refrigerated counters, in workshops or in large halls     Advantages at a glance   • Efficient heating process with environmentally friendly IR-C radiation • Heat transport via light waves - direct object heating without convective loss • Maximum efficiency: 100% of the electrical energy used is converted into heat output • Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust turbulence • Integrated hanging device for mounting on wall or mounting supports • Can also be used as a stand-alone device (suitable stands are available from us as accessories) • Ready to use - no additional installations or expensive modifications required   The ErP table for this heater can be found above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of power requirements for rooms up to 2.5 m ceiling height insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² each additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows: Area of ​​the room in m² x W/m² = required heating output in watts. Calculation example: For a room size of 10 m² with very good insulation quality and two external walls (50 + 10 W/m²), the recommended power requirement is 10 m² x 60W/m² = 600 W.       Technical data   heating output 1100W heating type infrared heat waves Suitable room temperature 0 - 60 °C heating surface 1.09 m² heating levels 1 voltage 220 - 240 V/50 Hz nominal current consumption max. 4.8 A power consumption max. 1.1 kW housing aluminum cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 905 x 22 mm (without feet) Weight 9 kg protection class IP54 overheating protection Yes Trotec article no. 1,410,003,018 guarantee 2 years

Read more less

This powerful heater (1200-2400 W) is ideal for use wherever limited areas need to be heated quickly. It is therefore ideal for seating areas, work areas, verandas, conservatories, but also for quickly drying out buildings. The delivery includes both the large tripod and a wall bracket. The 240GT is technically state-of-the-art. It was developed using proven know-how from previous models and supplemented with the latest technology. The "golden tubes" used warm up in a matter of seconds and provide good heat deep into the skin. The golden tubes also darken after a few seconds, which has a much less impact on the ambient light than conventional infrared heaters. Complete scope of delivery for stand installation and wall mounting: The tripod consists of a solid metal base and a 3-part screwed tube, with which the desired height can be selected between approx. 0.60m, 1.25m and 1.94m. In addition, the angle of inclination of the radiator head is adjustable so that the heat can be optimally directed to the desired zone. Wall mounting is also possible. The corresponding bracket is also included in the delivery. Easy to use: The heater can be controlled either on the heating head itself or using the remote control provided. The desired heating output is selected by pressing a button or using the remote control (included in delivery): 1000/2000W. Features of this infrared heater: ? Two "Golden Tube heating tubes", which are currently among the highest quality and most powerful on the market ? Selectable heating power of 1200W or 2400W (each tube has 1200W heating power, so one or both tubes are switched on) ? High-quality and robust base made of stainless steel ? Pivoting heating head for precise alignment to the zone to be heated ? Remote control or direct operation on the heating head itself ? Silent heat transfer without air movement, the heating beam is insensitive to wind and weather. ? Protection class IP55, i.e. protected against dust in damaging quantities and against water jets from any angle ? Compliance with WEEE standards ? “GS” tested and compliant with CE and EMC regulations Important: ? The spotlight is suitable for wall and floor mounting. However, it must not be mounted on the ceiling ? Plug: the device is equipped with a T23 plug and requires at least 13 amps. The appropriate socket has square poles (not round). These sockets are usually available in laundry rooms, new buildings and temporary construction sites. The plug does not fit into conventional 10A household sockets. Therefore, always check before purchasing whether you have a suitable socket available. Also note the photo in our image gallery where the plug is shown. ? Protection class IP55: The heater head itself is IP55 protected, which means it is protected against water jets. It can therefore be used outdoors. The plug itself must be protected from moisture. The included connection cable is approx. 1.5m long. ? Service life: The heating tubes have an expected service life of up to 5000 operating hours, which corresponds to 5-10 years depending on how often they are used. Due to the high level of protection against water jets, the internal components are very well sealed. Replacing defective tubes is theoretically possible, but very time-consuming. The water protection is also lost when replacing them. If the heater has reached the end of its service life, it is therefore advisable to replace the entire head. Scope of delivery: ? Radiant heater ? Tripod ? Wall mount ? Remote control (2 x AAA batteries not included) Examples of use for radiant heaters: Heating of: terraces, seating areas, balconies, marquees, workplaces, construction sites, workshops, agriculture, garages, warehouses, cellars, sheds, gardens and for use at work and for hobbies etc. 2-year warranty Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, other shipping options can be found in the shopping cart) (akd) Technical data Voltage: 220V-240V / 50Hz Power consumption: max. 2400 W Fuse min.: 13 A Protection class heating head: IP55 Heating head dimensions (H/W/D): 25 x 70 x 23 cm Dimensions with tripod (H/W/D): max. 230 cm x 70 cm x 46 cm Weight: 15 kg (complete including tripod), 3.7 kg (heating head only) Operating setting: remote control or directly on the device Application area: up to max. 20m2 indoor area or approx. 10m2 outdoor area Swiss plug: Yes / T23 Guarantee: 2 years

Read more less