wall-mounted dehumidifier

The top dryer for medium-sized rooms and for rooms with high humidity. The FDK performs reliable dehumidification work in both cooler and temperate rooms. It is extremely easy to operate: a rotary dial to regulate the desired target humidity and you're done. The device does everything else automatically. The FDK can use its dehumidifying power, for example, to keep single or double garages, archive rooms, cellar areas dry all year round, or to stabilize humidity in washing and drying rooms. You can only get this model from us; comparable products on the market are significantly more expensive. Thanks to the well-developed hot gas defrosting system, the dryer can be used down to almost freezing point. Also very noticeable is its good performance in low humidity areas, where it still extracts water from the air, where other dryers have long since stopped producing a drop. When the desired target humidity is reached, the device switches off completely and starts again automatically when the room humidity increases. The moist air is sucked in on one side of the housing and cleaned by an industrial, reusable filter. The dry air is blown into the room on the opposite side and creates effective circulation in the room. Many locations are conceivable in terms of placement in the room. Close to the floor, somewhere on a free shelf, or mounted on the wall with brackets. When wall-mounted, the dryer can also be installed right up high, directly under the ceiling. The condensate is drained directly via the hose connection. The FDK44 stands on 4 (removable) rubber feet and has two foldable handles on the top of the housing for easier mobility. When installed close to the floor, the hose must have a constant slope towards the drain so that it can drain cleanly and does not back up into the drip tray. The construction is solid and high quality. The housing is made of white powder-coated metal, the interior consists of components from the professional league. The device is therefore easily suitable for unattended continuous operation. Even in the event of a power failure, it resumes dehumidification work with the same settings and is therefore also suitable for operation with a timer or a smart home system. The FDK is suitable • as a dehumidifier for warehouses, commercial and industrial premises, garages and cellars • for wall mounting or directly on the ceiling • for continuous dehumidification of temperate but also cold rooms from 1°C • for unattended continuous operation • for operation with a timer     dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +1°C and +35°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions: 30°C/80% RH: 36 liters 20°C/80% RH: 18 liters 20°C/60% RH: 14 liters 10°C/60% RH: 8 liters (RH=relative humidity) Optional accessories The delivery includes the plug-in device including 4 feet for installation on a shelf, for example. If required, we have various suitable accessories for this dryer, such as: • 2 wall brackets for mounting on a wall (together Fr. 68.-) • Hose coupling • Hose • Condensate pump (if the condensate is to be transported upwards) Stronger version The device is also available with double strength as "FDK100" -> Details Comparable devices: Lunor L25     Technical data  Model: Fral Horizon FDK44 Tension: 230V / 50Hz Power consumption: max. 780W / 530W (at 20°C/60% RH) Sound pressure level: (our measurement) 1 m distance 53 dB(A) 2.5 m distance 51 dB(A) Dehumidification performance: 36 liters/day (30°C / 80% RH) air circulation volume: 450 m³/h (installed, free blowing approx. 650 m³) condensate tank: No tank / only hose connection possible Compressor: rotary compressor refrigerant: R410A (650gr.) Dimensions (L/H/D): 58 x 44 x 36 cm (including feet and handles) Height without feet and handles: 37 cm Weight: 34 kg Operating setting: hygrostat wheel Ambient temperature: 1°C ~ 35°C Application area: up to 100m² Swiss plug: Yes hose connection: Yes Guarantee: 2 years

Read more less

A quiet dehumidifier for basements and bathrooms. The C12's landscape format makes it very different from other wall-mounted dehumidifiers, as it can be installed in places where other devices don't fit. For example, in the bathroom above the mirror cabinet, in basements above the door lintel, or inconspicuously directly under the ceiling in basement passageways. It is quiet, economical, and manufactured to a high standard using professional-level components.   The moist air in the room is sucked in from the left side and the dry air is blown out into the room at the front. A filter that can be pulled out to the front cleans the air of coarse dust. The desired target humidity can be regulated using a continuously variable hygrostat switch. When the target humidity is reached, the dryer pauses (the ventilation also stops) and starts operating again with the same setting when the humidity in the room rises again. Installation is very simple: a support rail is attached to the wall with two screws, and the dryer can then simply be hung on it. The C12 does not have a bucket. This means that the extracted condensate must be drained down via a hose (12 mm inner diameter) into a nearby washbasin, into the bathtub or into a siphon drain. Features & Benefits • Continuously variable hygrostat for regulating the desired humidity. • Automatic function, ie the device switches off automatically when the target moisture content is reached and also switches on again automatically when it becomes more humid (including a +/- 5% power saving function so that the device does not switch on and off constantly. • The ventilation also stops when the set humidity is reached. • Suitable for unattended use and continuous operation. • Power consumption of only max. 205 watts (at 20 °C / 60 % humidity: 150 W). • Equipped with very reliable quality brand compressor. • No adjustments in the event of a power failure (device continues where it was interrupted), therefore also suitable for operation with a timer. • Direct hose connection for continuous drainage of condensate. • Operation warning light. • Maintenance-free / no separate or additional coolant is required (closed circuit). • Easy wall mounting on support rail (included). • Elegant design, metal housing, white powder-coated. • Quiet operation (comparable to bathroom extractor fan). • CFC free and meets WEEE standards. • CE compliant.    usage examples Cellar humidity : Ideal for damp cellars, cellar passages in single-family and multi-family homes, archives and for keeping laundry rooms dry (the C12 is too weak for active laundry drying, but it is certainly capable of stabilizing general humidity in laundry rooms). Bathroom : Fits over doors or mirrored cabinets to save space dehumidification performance The dryer is designed for rooms with at least a slight temperature between +8°C and +32°C. As with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions: 10 °C / 80% RH: 4.0 liters / 24 h (60%: 1.6 liters) 15 °C / 80% RH: 4.8 liters / 24 h (60%: 2.4 liters) 20 °C / 80% RH: 5.6 liters / 24 h (60%: 4.0 liters) 25 °C / 80% RH: 8.0 liters / 24 h (60%: 5.6 liters) 30 °C / 80% RH: 12 liters / 24 h (RH = relative humidity) scope of delivery • Plug-in device • Support rail with screws / dowels • 2 m condensate hose 12 mm assembly If you wish, we can professionally install the dryer at your home - price on request.   Technical data  Tension 220V-240V / 50Hz power consumption 150 W at 20 °C / 60% RH (max. 205 W) sound pressure level 2.5 m distance 44 dB(A) (our measurement) dehumidification performance max. 12 liters/day (30 °C / 80% RH) condensate tank direct hose connection 12 mm, no bucket compressor rotary compressor refrigerant R134A Dimensions (H/W/D) 32 x 70 x 23 cm (case) 35.5 x 71 x 23 cm (including rotary switch + hose connection) Weight 24.3 kg cessation of operations hygrostat wheel ambient temperature 8 °C ~ 35 °C application area up to approx. 30 m² Swiss plug Yes hose connection Yes / hose with 12 mm inner diameter Defrost electronically guarantee 2 years

Read more less

The top dryer for medium-sized rooms and for rooms with high humidity. This dryer performs reliable dehumidification work in both cooler and temperate rooms. Very similar to the FDK44 model, but with digital control and slightly increased dehumidification performance. The desired target humidity is set on the control panel. If the measured humidity is higher than the set value, the dryer works, otherwise it pauses. The display shows the current room humidity. The DH25 can use its dehumidifying power, for example, to keep single or double garages, archive rooms, basement areas dry all year round, or to stabilize humidity in washing and drying rooms. Thanks to the well-developed hot gas defrosting system, it can be used down to almost freezing point. Also very noticeable is its good performance in low humidity areas, where it still removes water from the air, where other dryers have long since stopped producing a drop. The moist air is sucked in on one side of the housing and cleaned by an industrial, reusable filter. The dry air is blown into the room on the opposite side and creates effective circulation in the room. Many locations are possible in terms of placement in the room. Both on the floor and on a free shelf (the wheels can be secured). The condensate is drained directly via the hose connection. Important: the hose must have a constant gradient towards the drain so that it can drain cleanly and does not back up into the drip tray. The construction is solid and high quality. The housing is made of white powder-coated metal, the interior consists of components from the professional league. The device is therefore easily suitable for unattended continuous operation. Even in the event of a power failure, it resumes dehumidification work with the same settings and is therefore also suitable for operation with a timer or a smart home system. The dryer stands on 4 robust castors (with brakes) and has two foldable handles on the top of the housing for easier mobility. Versatile application • as a dehumidifier for warehouses, commercial and industrial premises, garages and cellars • for continuous dehumidification of temperate but also cold rooms from 1°C • for unattended continuous operation • for operation with a timer     dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +1°C and +35°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions: 30°C/80% RH: 40 liters 20°C/80% RH: 16 liters 20°C/60% RH: 12 liters 10°C/60% RH: 7 liters (RH=relative humidity)   Optional accessories The plug-in device is included in the scope of delivery. If required, we have various suitable accessories, such as: • Hose coupling • Hose • Condensate pump (if the condensate is to be transported upwards) Stronger version The device is also available with double strength as "FDK100" -> Details Comparable devices: Lunor L25     Technical data  Model: Trotec DH25S Tension: 230V / 50Hz Power consumption: max. 700W / 510W (at 20°C/60% RH) Sound pressure level: (our measurement) 1 m distance 53 dB(A) 2.5 m distance 51 dB(A) Dehumidification performance: 40 liters/day (30°C / 80% RH) air circulation volume: 450 m³/h (installed, free blowing approx. 650 m³) condensate tank: No tank / only hose connection possible Compressor: rotary compressor refrigerant: R290 (152gr.) Dimensions (L/H/D): 580 x 455 x 350 mm (including wheels and carrying handles) Weight: 30 kg Operating setting: Digital Ambient temperature: 1°C ~ 35°C Application area: up to 100m² Swiss plug: EU plug with Swiss fixed adapter, 5m cable hose connection: Yes Guarantee: 2 years

Read more less

The top dryer for larger rooms. The FDK reliably does the heavy work in both cooler and temperate rooms. It is extremely easy to operate: a rotary dial to regulate the desired target humidity and you're done. The device does everything else automatically. The FDK can use its dehumidifying power to keep garages, industrial halls or water management systems dry all year round, for example. You can only get this model from us; comparable products on the market cost twice as much. Thanks to the well-developed hot gas defrosting system, the dryer can be used down to almost freezing point. Also very noticeable is its good performance in low humidity areas, where it still extracts water from the air, where other dryers have long since stopped producing a drop. When the desired target humidity is reached, the device switches off completely and starts again automatically when the room humidity increases. The moist air is sucked in on one side of the housing and cleaned by an industrial, reusable filter. The dry air is blown into the room on the opposite side and creates effective circulation in the room. Many locations are conceivable in terms of placement in the room. Close to the floor, somewhere on a free shelf, or mounted on the wall with brackets. When wall-mounted, the dryer can also be installed right up high, directly under the ceiling. The condensate is drained directly via the hose connection. The FDK100 stands on 4 (removable) rubber feet and has two foldable handles on the top of the housing for easier mobility. When installed close to the floor, the hose must have a constant slope towards the drain so that it can drain cleanly and does not back up into the drip tray. The construction is solid and high quality. The housing is made of white powder-coated metal, the interior consists of components from the professional league. The device is therefore easily suitable for unattended continuous operation. Even in the event of a power failure, it resumes dehumidification work with the same settings and is therefore also suitable for operation with a timer or a smart home system. The FDK is suitable • as a dehumidifier for warehouses, commercial and industrial premises, garages and cellars • for wall mounting or directly on the ceiling • for continuous dehumidification of temperate but also cold rooms from 1°C • for unattended continuous operation • for operation with a timer dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +1°C and +35°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions: 30°C/80% RH: 80 liters / 24 h 20°C/80% RH: 45 liters / 24 h 20°C/60% RH: 30 liters / 24 h 10°C/60% RH: 18 liters / 24 h (RH=relative humidity) Optional accessories The delivery includes the plug-in device including 4 feet for installation on a shelf, for example. If required, we have various suitable accessories for this dryer, such as: • 2 wall brackets for mounting on a wall (together Fr. 68.-) • Hose coupling • Hose • Condensate pump (if the condensate is to be transported upwards) Smaller version The device is also available in the smaller version "FDK44" -> Details Comparable devices: Lunor L75 Technical data Tension 230V / 50Hz power consumption 1020W (at 20°C/60% RH), max. 1550W sound pressure level 1 m distance 58 dB(A) (our measurement) 2.5 m distance 56 dB(A) (our measurement) dehumidification performance 80 liters/day (30°C / 80% RH) amount of recirculated air 1100 m³/h (installed, free blowing approx. 1350 m³/h) condensate tank No tank / only hose connection possible compressor rotary compressor refrigerant R410A Dimensions (L x H x D) 73 x 58 x 58 cm Weight 48 kg cessation of operations hygrostat wheel ambient temperature 1°C ~ 35°C application area up to 250m²/1000m³ Swiss plug Yes hose connection Yes guarantee 2 years

Read more less

High-quality dehumidifier for space-saving installation on a wall, ideal for up to 30m² . It is compact, quiet and economical. Its high-quality stainless steel housing combines aesthetic demands with a long service life.   A special feature of this dehumidifier are the slanted slats. These allow the air to be released again at the front of the device without any drafts. This guarantees quiet operation with a noise level of just 46 dB. The air inlet is on the left side via an easily removable air filter, and the dry air outlet is on the front.   The low noise level and draught-free air flow are a great advantage, especially in busy rooms such as changing rooms, wellness areas, smaller fitness rooms, etc. In contrast to the AD110 model, the 110P has an integrated pump with which the condensate can be drained away to a height or distance, for example into a washbasin, into a higher or more distant drain. The new digital control is easy to understand and digitally displays temperature, actual and target humidity as well as the operating hours. Installation is quite simple: a support rail is screwed to the wall and the dryer itself can then simply be hung on it. The rail, screws and dowels are already included in the delivery.     latest technology Thanks to the latest technology, it is highly efficient and economical. The R1234rf refrigerant it contains hardly has any impact on the environment. The "Global Warming Potential (GWP)" is an incredible value of 4, which corresponds to a reduction of 99.5% compared to comparable models of previous generations.     Characteristics Compact and space-saving Incl. wall mount Automatic pump with overflow protection New, environmentally friendly refrigerant stainless steel hood BlueDry technology for particularly energy-saving operation – even at low humidity and temperatures Intelligent e-Dry control operating hour meter Display of target and actual humidity For corporate customers: available on request with robust plastic housing in color of choice and with company logo, quantities and price on request.   dehumidification capacity / power consumption at 30°C / 80% RH = 15 liters/ day / 330 watts at 20°C / 60% RH = 8.5 liters/ day / 236 watts at 15°C / 70% RH = 8 liters/day / 215 watts    Technical data   Tension 230 V / 50 Hz power consumption max. 330W or 236W at 20°C/60% RH operating noise 1 m distance 46 dB(A) (our measurement) dehumidification performance 15 liters/day (30°C / 80% RH) amount of recirculated air 225 m³/h condensate tank integrated condensate pump, no tank hose connection Yes, 3m mounted on the device (12mm inner diameter) refrigerant R1234yf Weight 18.5 kg Dimensions (H x W x D) 49 x 33 x 28 cm cessation of operations Digital ambient temperature 3°C ~ 32°C Plug cable with Swiss plug T12 application area up to 30m² / 70m³ (temperature-controlled rooms) ambient temperature 3°C ~ 32°C operating hour meter Yes protection class IP54 guarantee 2 years

Read more less

From the "Top Ten" list of the most economical room air dryers: The Dryfix "Swiss" is an excellent dryer for single-family homes with drying rooms of up to 15m² and approx. 40m clotheslines. It is economical and quieter than room air dryers with comparable drying performance. The elegant, relatively slim metal housing fits perfectly into the room. To install, the support rail is fixed to the wall with two screws, and the dryer can then simply be hung on it. Rubber buffers prevent the (very slight) vibration from being transferred to the wall. The condensate is led via a hose either directly into a drain or into a bucket underneath the device. The air intake is on the side (right), and the coarse dust filter can be easily pulled out to the front for cleaning.  Drying programs: The controls are located on the side of the housing. A toggle switch is used to select whether you want the "laundry drying" or "room monitoring" mode. The desired residual moisture can be easily regulated using a rotary switch. Drying clothes: The drying program can be started at the touch of a button. The dehumidifier runs until the laundry is dry and then switches off automatically. Room monitoring: General room monitoring is used to prevent mold and odors in the basement. The device switches on automatically whenever the room humidity rises above the value set on the dial; the ideal value for this mode is around 55-60%. Unlike the laundry drying programs, the dryer never switches off completely in this mode, but only pauses as long as the humidity is right. If the humidity rises again, the drying mode switches back on.   You can only get Dryfix Swiss from us! It is manufactured exclusively for our company in a specialized factory in Switzerland. ambient temperature Technically, the "Swiss" dryers can be used down to 5°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. 15°C and higher are optimal for optimum drying speed. The declared drying performance was measured at a room temperature of 20°C. mounting on the wall  As with all tumble dryers, installation is extremely simple: a mounting rail is anchored into the wall with 2 screws, and the device can then be hung up. All necessary installation material such as screws/anchors and 1m of hose is included in the scope of delivery. Both the support rail and the two buffers in the lower part of the device that support the wall are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the sink using the hose if possible. If you want to use a bucket, please ensure that it has enough capacity (at least 8 liters) to avoid overflowing while drying laundry. If mounting on the wall is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   If you wish, we can professionally install the dryer at your home. Price on request. Important: - Sanitary (drain) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, if one does not already exist. - If your wall has internal insulation, we need to know this when ordering, as installation is more complex. The installation prices quoted refer to direct wall installation, i.e. directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls are charged according to the effort involved.   Technical data drying room: up to 15m² Drying performance: 1.73 Kg/h Consumption per kg of laundry: 0.307 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: 530W sound pressure level (our measurement): 1.0 m distance 60 dB(A) 2.5 m distance 57 dB(A) Dehumidification performance: 26 liters/day (30°C / 80% RH) air circulation volume: 600m³/h condensate tank: No integrated tank With hose connection the water directly into the drain or into a bucket. Compressor: rotary compressor Coolant: R410A Dimensions (H/W/D): 55 x 57 x 26 cm (depth: from wall to front) Weight: 35 kg Operating setting: hygrostat wheel Ambient temperature: 5°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Special features: Made in Switzerland

Read more less

Solidly built wall unit for dehumidifying rooms up to 25m2/70m2, ideal for bathrooms, saunas, archives or hobby rooms. The unit is available in two versions, with and without condensate tank (both versions have a direct hose connection), silver or white. The air intake is at the front, the dry air is blown out on both sides. For good circulation, the CDF10 should therefore have at least 30 cm of free space on each side. At temperatures below 3°C, the device switches off automatically. Recommended ambient temperature 8-30°C. What is also special about the CDF10 is that the hygrostat switch (for setting the desired room humidity) is located behind the front panel, which is fixed with two screws. This means that it is protected from changes to the target humidity by unauthorized persons. The CDF10 is therefore particularly suitable for use in public spaces. The dehumidifier is mounted on the wall using the wall bracket included in the delivery, and the condensate is drained off via the hose connection at the bottom of the dehumidifier (the hose must be sloping as there is no integrated pump). Alternatively, the dryer is also available with an integrated 5.5-liter bucket for collecting the water. The CDF10 is one of the quieter dehumidifiers. The operating noise can be heard in the immediate vicinity, but is hardly noticeable when the doors are closed. This model is offered in the same design under the name of the Danish manufacturer "Dantherm" and also as the "Krüger CDF10".   Technical data Voltage: 230 V AC, Swiss plug Power consumption: 300W max. Protection: 2.1 A/T Sound pressure level: 1m distance 49 dB(A) 2.5 m distance 46 dB(A) Dehumidification capacity: 10 liters/day (30°C / 80% RH) Refrigerant: R134a (190g) Dimensions (H/W/D): 60 x 54 x 25 cm without tank 81.5 x 54 x 25 with tank Weight: 28 kg without tank 30 kg with tank Ambient temperature: 8°C ~ 30°C (our recommendation) Warranty: 2 years

Read more less

A reliable wall-mounted dehumidifier with an attractive design. A durable, corrosion-protected construction made of powder-coated, galvanized sheet steel ensures maximum reliability for this industrial condenser dryer and, thanks to its protectively painted heat exchanger, makes it particularly resistant to environmental influences.   The combination of high efficiency and low-maintenance design makes the dryer ideal for fully automatic, hygrostat-controlled continuous drying applications in numerous areas of application, and thanks to its autonomous recirculation mode it can also be easily integrated into any application environment at a later date. With its KTL-coated heat exchanger , it is also extremely resistant to environmental influences, even in particularly reactive air environments with high salt, chlorine or solvent content.     Hygrostat controlled and protected against manipulation   The built-in hygrostat automatically regulates the humidity to an optimal level at which condensation, mold or corrosion have no chance. The target humidity can be freely set according to your needs. The smooth-running AC axial fan and the powerful compression refrigeration system ensure high efficiency.   The dry air supplied to the room is simultaneously heated through a process, so that the use of conventional heating and ventilation energy can be reduced.   Thanks to the high-quality hot gas automatic system, the dryer only requires very short defrosting phases. This is ideal, especially when dehumidifying unheated rooms, as the performance level is improved and efficiency increased.   The controls on this industrial dryer are tamper-proof and protected from access by unauthorized persons, which also makes it the ideal dehumidifier in public buildings, staff and changing rooms or museums.       Diverse application possibilities   In wall operation, the device can be used for a wide variety of applications, for example:   • Humidity control in staff rooms, changing rooms, lounges and break rooms • Keeping changing rooms, fitness studios, bike and ski cellars dry • Constant humidity conditions in garages, workshops, test benches or production halls • Dehumidification in archives, collections or libraries • Dehumidification of water technology facilities and pumping stations to prevent condensation on pipes or pumps • Humidity regulation when storing natural products, for example for quality assurance in wood storage or when storing raw tobacco • Corrosion prevention in electrical control centers, boiler systems, turbines and pipe systems in power plants or during the storage of body shells and metal components • Humidity control in data centers, control rooms, etc. • Humidity control in the food industry, for example cheese or confectionery production   Due to the horizontally directed air flow and its compact design, the dehumidifier, which is delivered ready to plug in, is also particularly suitable for installation above door areas.   The condensate extracted from the air is drained directly via a downward-lying hose. If the water needs to be drained to higher areas, please also note our pump kits.     Advantages at a glance   • Professional quality, made in Germany • High dehumidification performance even at low temperatures • Corrosion-protected construction • Fully automatic operation • Professional hot gas automatic defrosting system • Quiet AC axial fan for horizontal air circulation • Ideal for installation above door areas • Control elements installed protected against unauthorized access • Optionally available with condensate pump     Technical data   dehumidification performance at 20 °C / 60 % RH at 30 °C / 80 % RH   11 liters / day 22 liters / day air volume max. 225 m³/ h Maximum room size 60 m² (150 m³) temperature range 5 - 40°C humidity range technically humidity range practice 30 - 90 % RH 40 - 90% RH (finned evaporator) voltage 220 - 240 V/50 Hz nominal current consumption max. 3.7 A power consumption max. 657W Recommended coverage 10 A Plug approx. 3.5m connection cable with EU plug and Swiss fixed adapter refrigerant R-407C (480g) GWP1774 hose connection   Direct hose connection, no bucket suitable hose 10mm inner diameter short hose piece included in delivery operating noise   53 dB(A) at 1 m distance 49 dB(A) at 3 m distance dimensions (W x H x D) 840 x 330 x 365 mm Weight 37 kg defrosting automatic hot gas automatic dehumidification mechanical hygrostat wheel, stepless fan axial, 1-stage fan prefilter Yes operating hour meter no continuous operation possible Yes display no memory function yes (set values ​​remain mechanically fixed) Trotec article no. 1,125,000,111 guarantee 2 years

Read more less

A reliable wall-mounted dehumidifier with considerable dehumidification power and an attractive design. A durable, corrosion-protected construction made of powder-coated, galvanized sheet steel ensures maximum reliability for this industrial condenser dryer and, thanks to its protectively painted heat exchanger, makes it particularly resistant to environmental influences.   The combination of high efficiency and low-maintenance design makes the dryer ideal for fully automatic, hygrostat-controlled continuous drying applications in numerous areas of application, and thanks to its autonomous recirculation mode it can also be easily integrated into any application environment at a later date. With its KTL-coated heat exchanger , it is also extremely resistant to environmental influences, even in particularly reactive air environments with high salt, chlorine or solvent content.     Hygrostat controlled and protected against manipulation   The built-in hygrostat automatically regulates the humidity to an optimal level at which condensation, mold or corrosion have no chance. The target humidity can be freely set according to your needs. The smooth-running AC axial fan and the powerful compression refrigeration system ensure high efficiency.   The dry air supplied to the room is simultaneously heated through a process, so that the use of conventional heating and ventilation energy can be reduced.   Thanks to the high-quality hot gas automatic system, the dryer only requires very short defrosting phases. This is ideal, especially when dehumidifying unheated rooms, as the performance level is improved and efficiency increased.   The controls on this industrial dryer are tamper-proof and protected from access by unauthorized persons, which also makes it the ideal dehumidifier in public buildings, staff and changing rooms or museums.     Diverse application possibilities   In wall operation, the device can be used for a wide variety of applications, for example:   • Humidity control in staff rooms, changing rooms, lounges and break rooms • Keeping changing rooms, fitness studios, bike and ski cellars dry • Constant humidity conditions in garages, workshops, test benches or production halls • Dehumidification in archives, collections or libraries • Dehumidification of water technology facilities and pumping stations to prevent condensation on pipes or pumps • Humidity regulation when storing natural products, for example for quality assurance in wood storage or when storing raw tobacco • Corrosion prevention in electrical control centers, boiler systems, turbines and pipe systems in power plants or during the storage of body shells and metal components • Humidity control in data centers, control rooms, etc. • Humidity control in the food industry, for example cheese or confectionery production   Due to the horizontally directed air flow and its compact design, the dehumidifier, which is delivered ready to plug in, is also particularly suitable for installation above door areas.   The condensate extracted from the air is drained directly via a downward-lying hose. If the water needs to be drained to higher areas, please also note our pump kits.     Advantages at a glance   • Professional quality, made in Germany • High dehumidification performance even at low temperatures • Corrosion-protected construction • Fully automatic operation • Professional hot gas automatic defrosting system • Quiet AC axial fan for horizontal air circulation • Ideal for installation above door areas • Control elements installed protected against unauthorized access • Optionally available with condensate pump     Technical data   dehumidification performance at 20 °C / 60 % RH at 30 °C / 80 % RH   20 liters / day 46 liters / day air volume max. 635 m³/ h Maximum room size 130 m² (325 m³) temperature range 5 - 40°C humidity range technically humidity range practice 30 - 90 % RH 40 - 90% RH (finned evaporator) voltage 220 - 240 V/50 Hz nominal current consumption max. 4.2 A power consumption max. 922W Recommended coverage 16 A Plug approx. 3.5m connection cable with EU plug and Swiss fixed adapter refrigerant R-407C (500g) GWP1774 hose connection   Direct hose connection, no bucket suitable hose 10mm inner diameter short hose piece included in delivery operating noise   56 dB(A) at 1 m distance 52 dB(A) at 3 m distance dimensions (W x H x D) 790 x 651 x 255 mm Weight 47 kg defrosting automatic hot gas automatic dehumidification mechanical hygrostat wheel, stepless fan axial, 1-stage fan prefilter Yes operating hour meter no continuous operation possible Yes display no memory function yes (set values ​​remain mechanically fixed) Trotec article no. 1,125,000,116 guarantee 2 years

Read more less