Compact air conditioning unit in energy class A for cooling bedrooms, offices and smaller living rooms up to approx. 18m². It is easy to operate on the device itself or via remote control. The fan pushes the cold air into the room at a comfortable height, and the blow-out direction can be controlled by vertically adjustable slats. The warm exhaust air is led out of the room using the hose provided, e.g. out the window or through the balcony door. As with all mobile air conditioning units, the ventilation and motor of this unit can be heard clearly, although the overall noise has been noticeably reduced compared to previous mobile air conditioning units in this performance class.   Design / Scope of delivery • White plastic housing • Control panel with display of the desired temperature and the current room temperature • 4 rollers • Remote control • Extendable exhaust hose approx. 1.50m (with narrowing attachment for tilt windows) • Cable approx. 1.50 m with Swiss plug (normal socket 230V / three-pin) • User manual German + French  Once the target temperature is reached, the device stops cooling and switches back on automatically when the room air warms up again. As with most air conditioning units, the ventilation always runs. The selectable temperature range is between 18 and 32°C. The timer can be used to limit the operating time from 1 - 12 hours. Alternatively, the timer can also be used to start the device 1-12 hours in the future. For example, so that it switches on automatically shortly before you return or before you go to bed. No memory function, ie the device must be restarted after a power failure, therefore not suitable for operation with a timer.   The water that is removed from the air during the cooling process automatically evaporates with the warm air through the exhaust hose. When the device is switched off, a few drops of residual water remain and are collected in a small internal tank. This tank must be emptied approximately once a week, depending on how often it is used; a signal light indicates when it is full. environmentally friendly refrigerant R290 The reduction of greenhouse gases (GWP - Global Warming Potential) and ozone depletion potential (ODP - Ozone Depletion Potential) is becoming increasingly important. As a manufacturer of mobile local air conditioning units, we also want to make our contribution to environmental protection by using R290 as a natural refrigerant. The abbreviation R290 stands for propane gas - a chemical compound made up of the naturally occurring elements hydrogen and carbon. In contrast to the previously used refrigerants containing fluorocarbons (here: HFCs) in air conditioning and refrigeration technology, the use of R290 as a natural refrigerant in mobile local air conditioning units has the advantage that its components are completely natural and ecological and therefore have neither an ozone depletion potential nor a significant direct global warming potential.    Not suitable for year-round cooling of server rooms.         Technical data   cooling capacity 2010 W / 7000 BTH/h power consumption 778 W Room size max. 20 m² air volume flow 320 m³/h on level 2 steps 2 cooling setting range 18 - 32° C operating modes cooling, ventilation exhaust hose Ø 127 mm, length 1.5m refrigerant R290 power connection 230V / 50 Hz noise level (manufacturer's information)  noise level (our measurement)   65 dB(A) 1.0 m distance fan level 1 / 3: 56 / 59 dB(A) 2.5 m distance fan level 1 / 3: 53 / 56 dB(A) energy class A shipping weight 21.50 kg Dimensions (H x W x D) 752 x 305 x 383 mm guarantee 2 years  

Read more less

This air cooler is suitable for cooling open spaces and zones comfortably and economically. Cooling takes place without any refrigerant or compressor, only with the evaporative cooling of water.   In principle, water is pumped through an absorbent honeycomb filter using a pump. A fan draws warm air through the water-soaked honeycomb, which cools it down and blows it out into the room around 5°C cooler, depending on the humidity. The evaporative cooling generated in this way is much more economical in terms of electricity consumption than conventional air conditioning units with a compressor. Since the air that is released is not only cool but also very humid, this type of unit is not suitable for small, enclosed rooms. However, they are very effective when windows are open so that the moisture can escape from the room. They can also be used in open areas such as terraces, street cafes, garden seating areas, or where workplaces in large halls need to be specifically cooled.     Operation   The water tank has a comfortable capacity of 20 liters and the water requirement is 2 liters per hour. This means that the device can provide cooling air for up to 10 hours without having to refill the water. The fan delivers a powerful 750 m³ of air circulation per hour and can be regulated in four stages. It can also be operated as a pure fan without the cooling mode switched on.   For even air distribution, the automatic swing function can be activated, whereby the inner vertical slats constantly swing back and forth from left to right. The outer horizontal slats, on the other hand, can be adjusted manually to direct the air flow forwards, upwards or downwards as desired.   In addition, additional functions are included: Timer function: With the practical 8-hour timer, you can plan the switching on and off of your device in advance. So that you don't forget to switch off the air cooler in the evening at the office, for example, simply set the desired running time in advance. Conversely, it is also very pleasant when you enter the kitchen or living room in the morning and the air cooler is already active.   Ventilation types: Constant air circulation or "air refreshment" mode. In "air refreshment" mode, the ventilation speed is automatically regulated alternately stronger and weaker. This creates a pleasantly gentle air flow in the room, reminiscent of a natural sea breeze   Fragrance oil diffuser: Fill the dispenser with your favorite fragrance if you wish. It is continuously released into the room air during operation.   Ionizer for air purification: The ionizer enriches the air blown out with anions. These refresh the air in a natural way and reduce pollutants such as odors, fine dust, bacteria or even electrosmog. In addition, the easy-to-clean nylon mesh filter filters larger particles out of the air.   All functions can also be conveniently adjusted from your seat using the remote control.   So that you can always enjoy cooling down where you need it, the air cooler can be easily moved from one place to another using the recessed handles on the side and the smooth-running transport wheels with parking brakes. Additional feet are included in the delivery for better attachment to slightly sloping surfaces.     Excellent design   The PAE air cooler also scores points visually: the stylish housing design of the two air coolers was awarded the renowned “Red Dot Design Award” and the “IF Design Award”.     Cooling with honeycomb filter, extra cold with cooling batteries   In contrast to air conditioning units, no chemical coolants are used in air coolers. The cooling process is completely natural. In addition, no exhaust hose is needed, nor are complex installations necessary. A mobile air cooler works on the principle of natural evaporative cooling. You know this from your own experience: if you blow on damp skin, you feel an immediate cooling effect, as the evaporation process removes heat. It is exactly the same with air coolers: inside the air cooler there is a honeycomb filter saturated with water using honeycomb technology. Refreshment tip: The colder the water, the greater the cooling performance. If you put the four cooling batteries included in the delivery into the water tank, the cooling performance can be increased even further. This additional kick of freshness can also be achieved with ice cubes.     level indicator and direct hose connection   The clearly visible level indicator lets you see at a glance whether there is still enough water in the voluminous 20-liter tank. When the water tank is empty, the device switches off automatically and a signal LED flashes. If you don't want to fill the tank manually, you can easily connect it to a water tap using the hose included in delivery.     Year-round operation – air cooler in summer, humidifier in winter   Thanks to its good humidification performance, the device can also be used as an efficient humidifier in autumn and winter when the air in the room is too dry. Dry heating air can irritate the respiratory tract, dry out the skin and redden the eyes. The humidification performance of this device is very high compared to conventional household humidifiers. Even at a low ventilation level, this device achieves the humidification performance of commercially available humidifiers. Even when used as a humidifier, the air is blown out cooled. However, this cooling effect is also reduced at a low ventilation level.     Benefits for the at a glance   • 4-in-1 evaporative air cooler: air cooling, ventilation, air purification, air humidification • Natural air cooling through evaporative cooling with honeycomb technology • Possibility of operation with four supplied cooling packs or ice cubes to increase cooling performance • High evaporation capacity of 2 liters per hour • 20-liter water tank for long use • Adjustable blowing direction and automatically pivoting slats • Possibility of a permanent water connection • Air purification by ionizer • Natural wind mode • IR remote control • 4 fan speeds • Timer function • Night mode • Integrated fragrance oil diffuser for optional room air aromatization • Particularly energy efficient • Easy to transport thanks to stable castors • Can also be used on floors with a slight slope thanks to the feet • Suitable for year-round use. Air cooler in summer, humidifier in winter     scope of delivery   • Air cooling device • Infrared remote control • 4 ice packs • Set for direct hose connection     functions and properties   • Air freshening function • Air cooling function • Ionization • Possibility of operation with cooling packs • Ventilation function • Evaporative cooling with honeycomb technology • Shutdown when water tank is empty • Water level indicator • Warning light when water tank is empty • Night mode • Continuous operation • adjustable blowing direction • Timer function • Swing function    timer function   • Switch-on time can be preselected • Switch-off time can be preselected   filter   • Air filter • Honeycomb filter   mobility   • Stand feet • Plastic transport rollers • recessed grips • Transport rollers -HA • Parking brakes • Feet       Technical data   evaporation performance max. 2 liters / hour Max. room size our recommendation: max. 30 m² (manufacturer's information: 60 m²) air volume flow max. 750 m³ / hour ventilation levels 4 air outlet speed max. 11 m / sec. ambient temperature +5 to +43 °C fan radial fan operating noise max. 70 dB(A) at 2.5 m distance at highest ventilation level voltage 220 - 240 V/50 Hz nominal current consumption max. 0.65 A power consumption max. 145 W Recommended coverage 10 A cable + plug approx. 1.6 m cable, 2-pin plug suitable for Swiss sockets Dimensions (H x W x L) 880 x 350 x 390 mm weight unfilled 13 kg control panel LED touchscreen remote control Yes Trotec article no. 1.210.003.020 guarantee 2 years

Read more less

A recommended mobile air conditioning unit with exhaust hose for quickly cooling workplaces, living rooms and bedrooms during the warm season.  The device is easy to operate on the device itself or via remote control. The exhaust air is led out of the room using the hose provided, e.g. out the window or through the balcony door. On the front of the housing is the powerful, 3-stage fan with slats, which are either fixed in one direction or use the swing function to fan the outgoing cold air vertically.     Design / Scope of delivery • White plastic housing • Control panel with display of the desired temperature and the current room temperature • 4 rollers • Remote control • Extendable exhaust hose approx. 1.20m (with narrowing attachment for tilt windows) • Cable approx. 1.50 m with Swiss plug (normal socket 230V / three-pin) • multilingual user manual including German, French, Italian • Energy class A. • Environmentally friendly refrigerant R290   Once the target temperature is reached, the device stops cooling (the ventilation always runs, as with most air conditioning units) and switches back on automatically when the room air warms up again (selectable range: 16°-32°C). The air conditioning can be limited to a timer of 1 - 24 hours in operation, but can also be programmed 1-24 hours in the future so that it switches on automatically, for example, 1 hour before you return or before you go to bed. memory function After a power failure, operation is automatically resumed with the same settings. This model is therefore also suitable for operation with a timer. Not suitable for year-round cooling of server rooms. As with all mobile air conditioning units, the ventilation and motor of the "Crono" are clearly audible, although noticeably quieter than units with comparable performance.         Technical data   functions Cooling, dehumidifying, ventilating energy class A (cool) cooling capacity 2640 W / 10000 BTU/h consumption cooling mode 1010 W Suitable for rooms up to 24m² air volume max. 350m³/h fan 3-stage selectable temperature 16 - 32° C Ø exhaust hose inside/outside 14 / 15 cm (length 150 cm) refrigerant R290 power connection 230V / 50 Hz shipping weight 22 kg Dimensions (H x W x D) 713 x 365 x 355 mm noise level Our measurement: 1.0 m distance fan level 1/3: 54 / 58 dB(A) 2.5 m distance fan level 1/3: 51 / 55 dB(A) guarantee 2 years

Read more less

Fast cooling and a comfortable room climate at an affordable price. This 3-in-1 air conditioner offers efficient cooling of offices and rooms up to 20 m² and makes working more pleasant. In addition to pure cooling, there is also a dehumidification and ventilation function.   When the preselected target temperature is reached (continuously adjustable between 17-35 °C), the integrated thermostat switches the compressor in the device off completely. In comparison to conventional designs, this makes the air conditioning unit extremely economical to cool. Of course, the compressor is automatically activated again when the target temperature is exceeded, as long as the device is switched on.     comfort features for well-being   For a restful sleep without catching a cold, the device has a night mode that slowly increases the temperature. In addition, the LED display can be switched off completely so that you are not disturbed by any unnecessary light.   Two fan speeds and the variable adjustable blowing direction ensure the optimal distribution of the air flow. In combination with the integrated 24-hour timer, electricity costs can be saved, as this allows the device to be switched on and off at specific times. This is very helpful, for example, if the room is only used at certain times.   Follow-Me function: remote control with intelligent temperature measurement All functions and settings can be carried out not only directly on the LED device control panel, but also via remote control without having to get up. The integrated "Follow-Me function" also gives you even more automatic comfort: The thermostat inside the air conditioner normally measures the current room temperature at the location and shows this on the LED display. However, the remote control can also measure the temperature exactly where it is currently located. When the "Follow-Me function" is active, the air conditioner automatically receives the current temperature value from the remote control every 3 minutes and adjusts itself accordingly. So if you use the remote control to move from a place in the shade to a place by a sunny window, for example, the air conditioner will increase the cooling capacity accordingly to compensate for the warmer temperatures.    Simultaneous dehumidification of the room air In summer, it's not just the heat that's unpleasant, but often the humidity is too high. During the cooling process, this air conditioner removes up to 1.8 liters of water per hour from the air. This makes the room climate much more pleasant. In addition, the integrated dehumidification function also prevents unhealthy mold formation. The water that is removed from the air is evaporated directly into the open air with the warm air via the exhaust hose. The internal container for residual water only needs to be emptied very rarely, as it only has to collect the few drops that can no longer be evaporated once the device is switched off.     installation and maintenance   The air conditioning unit can be set up in just a few steps and is ready for use straight away. The pre-assembled air filter cleans the room air of lint, dust and animal hair and can be easily removed and cleaned.   Propane (R290) as an environmentally friendly refrigerant in air conditioning systems  Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air conditioning unit makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and is a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). Additional benefit for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.    Advantages at a glance   • Energy efficiency class A • 2 kW cooling capacity • Three operating modes: cooling, ventilation, dehumidification • Two ventilation levels • Timer function • Practical LED display • Display of room temperature • Easy-care membrane keypad • Adjustable air outlet direction • IR remote control • Removable air filter • Air purification function (pet hair, lint, dust) • Quiet operation < 53 dB(A)   Why do you need an exhaust hose? Professional home air conditioning units worldwide are all compression refrigeration systems. And these generate both cold and heat - unalterable physics. The cold generated is wanted in the room, but the heat is not. That's why it has to go outside. With split units, it is automatically outside, because here the heat is dissipated directly in the condenser installed outside. Nevertheless, these units also require a connecting line for the circulating coolant, which ensures the transport of cold.  With a monoblock design, the heat is centrally located in the device and must therefore be directed outside without mixing with the indoor air to warm it up again. For this purpose, at least one exhaust hose is required, which is therefore an integral part of every monoblock air conditioning unit available on the market such as this one, even if it is not directly visible in every illustration of the application.     Technical data   cooling capacity max. 2 kW (7000 Btu/h) Our recommendation room size max. 20 m² or 50 m³ Room size information manufacturer max. 26 m² or 65 m³ Minimum room size 7 m² fan speeds 2 Selectable room temperature 17 - 30 °C dehumidification performance 1.8 liters / h ambient temperature max. 35 °C power connection 220 - 240 V, 50 Hz Recording max. 1 kW nominal current consumption 3.3 A Recommended coverage 10 A cable / connector 1.5 m cable, EU plug with Swiss fixed adapter T12 refrigerant R290 (130g) GWP 3 Operating noise fan level 1   at a distance of 1 m 53 dB(A) at a distance of 3 m 49.5 dB(A) exhaust hose Ø 153 mm, length 1.5 m Dimensions (H x W x D) 703 x 345 x 355 mm Weight 22.5 kg Trotec article no. 1,210,002,012 guarantee 2 years  

Read more less

  A well-designed, powerful air conditioning system for cooling living rooms and bedrooms. It is easy to operate on the device itself or via remote control. The exhaust air is led out of the room using the hose provided, e.g. out the window or through the balcony door. Energy class A. Powerful fan, with adjustable slats the blowing direction of the cold air can be easily controlled.   Design / Scope of delivery • Plastic housing white/anthracite • Control panel with display of the desired temperature and the current room temperature • 4 rollers • Remote control • Extendable exhaust hose approx. 1.40m (no narrowing attachment for tilt windows is available / included with this model) • Cable approx. 1.50 m with Swiss plug (normal socket 230V / three-pin) • Operating instructions in German+French   Once the target temperature is reached, the device stops cooling (the ventilation always runs, as with most air conditioning units) and switches back on automatically when the room air warms up again (selectable range: 18-32°C). The air conditioning can be limited to a timer of 1 - 24 hours, but can also be programmed 1-24 hours in the future so that it switches on automatically 1 hour before you return or before you go to bed, for example. No memory function, i.e. the device must be restarted after a power failure, therefore not suitable for operation with a timer. extra cooling A compartment on the side can be filled with water, which cools the air blown out by another 2°C. This brings a welcome increase in performance during the warmest season. storage compartment for accessories The hose and the accessories included in the delivery can be cleverly stored in a compartment prepared for this purpose from above in the device itself. As with all mobile air conditioners, the ventilation and motor of this model are clearly audible, although the overall noise has been noticeably reduced compared to previous mobile air conditioners in this performance class. Not suitable for year-round cooling of server rooms.       Technical data  functions Cooling, dehumidifying, ventilating energy class A cooling capacity 3200 W / 11000 BTU/h consumption cooling mode 1230 W Suitable for rooms up to 28 m² air volume max. 350m³/h fan 3-stage Selectable temperature range 18 - 32° C Ø exhaust hose inside/outside 132 / 142mm (length 140 cm) refrigerant R290 power connection 230V / 50 Hz shipping weight 31 kg Dimensions (H x W x D) 744 x 485 x 313 mm noise level (our measurement) 1.0 m distance fan level 1/3: 56 / 58 dB(A) 2.5 m distance fan level 1/3: 53 / 54 dB(A) guarantee 2 years

Read more less

A good air conditioning system for cooling the bedroom, living room or office. Simply set the desired temperature between 16°C and 31°C and the device will automatically cool the room air to the set value. The extracted heat is led out the window via an exhaust hose.     comfort functions   With remote control, 24-hour timer and automatic mode, this model offers you convenient control from your seat, pre-scheduled switching on or off and independent cooling depending on the room temperature.     fan function – with and without cooling   Pure ventilation operation is also possible: a two-stage adjustable fan blower with an air volume of up to 320 m³/h ensures fresh wind and gentle air circulation in the room - even without activating the cooling compressor. The direction of the air flow can be manually adjusted using the horizontal air guide flaps so that the fresh breeze arrives exactly where you want it. In addition, the air filter integrated on the back of the device filters fluff, dust flakes and animal hair from the room air - an advantage not only for allergy sufferers.     Simultaneous dehumidification of the room air   In summer, it's not just the heat that's unpleasant, but often the humidity is too high. During the cooling process, this air conditioner removes up to 0.8 liters of water per hour from the air. This makes the room climate much more pleasant. In addition, the integrated dehumidification function also prevents unhealthy mold formation. The water that is removed from the air is evaporated directly into the open air with the warm air via the exhaust hose. The internal container for residual water only needs to be emptied very rarely, as it only has to collect the few drops that can no longer be evaporated once the device is switched off.     Mobile and flexible instead of drilling and doweling   If you want to place the device in another room, it can be easily moved from one place to another with its smooth-running transport wheels. In contrast to permanently installed air conditioning systems, you can always use a mobile air conditioning system exactly where cooling is needed - without drilling, screwing or dowels. All you need to do is fix the exhaust hose included in the delivery in a window or door opening and you can start cooling the room.   To ensure that no warm outside air penetrates into the room to be cooled through slightly open windows or doors, we offer window and door seals as optional accessories. This allows you to cool even more efficiently.     Tip for restful sleep   If you want to fall asleep with gentle cooling on warm summer nights, you can set a timer so that the air conditioner switches itself off after a certain time to prevent your body from cooling down during the night.     Propane (R290) as an environmentally friendly refrigerant in air conditioning systems   Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air conditioning unit makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and is a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). Additional benefit for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.     Advantages at a glance • Suitable for rooms up to 24 m² / 60 m³ • Energy efficiency class A • 2.6 kW cooling capacity • 3 operating modes: cooling, ventilation, dehumidification • 2 ventilation levels • Adjustable air outlet direction • Target value pre-selection in the range of 16°C to 31°C • Energy-saving operation through automatic switching on/off when the target value is reached/exceeded • 24-hour timer • Remote control + intuitive LED display • Removable air filter against animal hair, fluff, dust flakes • Quiet operation < 53 dB(A) • Environmentally friendly refrigerant R290 • Mobile air conditioning systems - Comfortable cooling machines     Why do you need an exhaust hose?   Professional home air conditioning units worldwide are all compression refrigeration systems. And these generate both cold and heat - unalterable physics. The cold generated is wanted in the room, but the heat is not. That's why it has to go outside. With split units, it is automatically outside, because here the heat is dissipated directly in the condenser installed outside. Nevertheless, these units also require a connecting line for the circulating coolant, which ensures the transport of cold.   With a monoblock design, the heat is centrally located in the device and must therefore be directed outside without mixing with the indoor air to warm it up again. For this purpose, at least one exhaust hose is required, which is therefore an integral part of every monoblock air conditioning unit available on the market such as this one, even if it is not directly visible in every illustration of the application.     Technical data   cooling capacity max. 2.6 kW (9000 Btu/h) Our recommendation room size max. 24 m² or 60 m³ Room size information manufacturer max. 34 m² or 85 m³ Minimum room size 9 m² fan speeds 2 Selectable room temperature 16 - 31 °C dehumidification performance 0.8 liters / h ambient temperature max. 35 °C power connection 220 - 240 V, 50 Hz Recording max. 1 kW nominal current consumption 3.5 A Recommended coverage 10 A cable / connector 1.8 m cable, EU plug with Swiss fixed adapter T12 refrigerant R290 (160g) GWP 3 Operating noise fan level 1   at a distance of 1 m 53 dB(A) at a distance of 3 m 49.5 dB(A) exhaust hose Ø 145 mm, length 1.5 m Dimensions (H x W x D) 700 x 320 x 300 mm Weight 23.5 kg Trotec article no. 1,210,002,022 guarantee 2 years  

Read more less

In our opinion, this is the best portable air conditioner on the market. The slightly higher price is justified for anyone who values ​​appearance, comfort and operating noise.  In principle, the "Milo" is a free-standing air conditioning unit, the exhaust air of which is led either out the window or into a neighboring room via a hose. It has a powerful fan with slats on the top of the housing, which can either be locked in one direction or use the swing function to fan the cold air out vertically. Despite a lot of recirculated air, the operating noise is quieter than with other devices in this category, although as with all mobile air conditioning units, it is still clearly noticeable. Once the desired temperature is reached, the device stops cooling (or heating in heating mode) until the temperature changes again. As with most air conditioning units, the ventilation is always running to circulate the air in the room as best as possible. The selectable temperature range is from 16 to 30°C. The timer can be used to limit the operating time to between 1 and 24 hours. You can also program a start time for operation 1-24 hours in the future, so that it switches on automatically, for example, 1 hour before you return or before you go to bed. The following features distinguish the "Milo Plus" from commercially available devices: Maintain a constant temperature Basically, you can choose whether the device cools or heats. In "Auto" mode, however, you can also select a desired constant temperature. If the room temperature falls below this, the system runs in heating mode; if it is above this, it automatically switches to the cooling function. This option is very rare with mobile devices.   WIFI function All functions can be conveniently controlled via WiFi using an app. Of course, the device can also be controlled traditionally using the keyboard or the remote control that is also included in the delivery.    "I feel" function on the remote control As with more expensive split systems, the remote control has the so-called "I-Feel function". With this function, the temperature is not measured on the device, but on the remote control. This means that it is best to place the remote control near you, for example on the sofa (the device must be in visual contact with the remote control) and you will then have the perfect temperature where you want it. parental controls If necessary, the child lock can be activated to prevent children from changing the settings. mold protection "X-FAN" (only on remote control) With this function, the ventilation continues to run for 2 minutes after cooling or dehumidification. This dries out the still damp interior of the device and prevents the formation of mold in the device. memory function After a power failure, operation is automatically resumed with the same settings. This model is therefore also suitable for operation with a timer. environmentally friendly refrigerant R290 The green idea is also taken into account: The "Milo Plus" is equipped with the latest refrigerant R290, which is practically climate-neutral. The R290 hardly pollutes the environment, or in numbers: 600 times less than the previous products that were used until recently. Of course, an air conditioning unit, even with the latest refrigerant, will never be as environmentally friendly as jumping into cold water or continuing to sweat undeterred. Design / Scope of delivery • White plastic housing • Control panel with display of the desired temperature and the current room temperature • 4 rollers • Remote control • Extendable exhaust hose approx. 1.20m (with narrowing attachment for tilt windows) • Cable approx. 1.50 m with Swiss plug (normal socket 230V / three-pin) • Multilingual user manual including German, French, Italian • Energy class A in cooling mode, A++ in heating mode. • Environmentally friendly refrigerant R290   Not suitable for year-round cooling of server rooms. As with all mobile air conditioning units, the ventilation and motor of this unit are clearly audible, although noticeably quieter than units with comparable performance, especially on the lowest fan setting.     Technical data  Features: Cooling, heating, dehumidifying, ventilating Energy class: A (cooling), A++ (heating) Cooling capacity: 3500 W / 13000 BTU/h Consumption cooling mode: 1300 W Heating power: 3500 W / 13000 BTU/h Consumption heating mode: 1100W Suitable for rooms up to 30m² air volume: max. 380m³/h fan 3-stage selectable temperature: 16 - 30° C Ø exhaust hose inside/outside: 14 / 15 cm (length 120 cm) refrigerant: R290 power connection: 230V / 50 Hz Shipping weight: 36 kg Dimensions: Height x Width x Depth: 835 x 385 x 405 mm Noise level: Our measurement: 1.0 m distance fan level 1/3: 52 / 56 dB(A) 2.5 m distance fan level 1/3: 49 / 53 dB(A) Guarantee: 2 years

Read more less

This air conditioning system does not require an external unit. It is mounted on the interior wall and the air is exchanged to the outside through holes in the wall. Ideal for areas with regulations regarding the townscape, such as old towns or protected buildings. • 2.4 kW cooling and heating capacity • Cooling, heating, ventilating, dehumidifying • Wi-Fi with own app This plug-in compact device does not require an external unit. It can be used as a cost-effective solution for use in hotel rooms, offices, bedrooms and in various container applications for schools or temporary accommodation. Thanks to inverter technology, it is economical and quieter than models of a similar design. assembly The device is mounted on an outside wall in the room. On the back there is an opening through which outside air is sucked in and an opening through which the warm air is blown out (or in heating mode: cold air is blown out). Before the system can be installed, two core holes must be drilled into the wall , which are designed to fit these openings. You can find the details in the installation instructions in the "Downloads" section on this page. cooling and heating Thanks to heat pump technology, the "Apollo" can be used both for cooling and for economical heating of rooms. The appropriate function is selected at the touch of a button. program functions It is easy to operate and can be done either on the display of the device itself or via the WLAN function on a mobile phone or tablet. “Eco” function: for lower consumption “Turbo” function: desired temperature in the shortest possible time “Anti-Cold Wind” function in heating mode: The air is only released into the room when it is sufficiently warmed up “Sleep” function: Optimizes the operation of the air conditioner during the night hours Autodiagnosis function: Display of errors on the device display for easy troubleshooting Features and Benefits • Ideal for a room size of 70m³ • Remote-controlled WiFi with its own app • 4 in 1: cooling, heating, dehumidifying, ventilating • Energy efficiency class A in cooling mode and heating mode • Automatic swivel movement or individually adjustable position of the air baffle (flap) to optimally direct the air flow in the room • Programmable timer ON/OFF 24h • 2 holes in the wall and unobtrusive aesthetics • Type of condensate drain: via external or internal pipe • DC inverter technology, maximum comfort, minimum consumption • Ventilation speeds: 3 + Auto Technical data Cooling capacity: 2400 W / 8530 BTU/h Heating power: 2400 W / 8530 BTU/h Recommended room size: 70 m³ Energy efficiency class: A Housing color: white Refrigerant: R32 (0.39 kg) Noise level indoor unit: 56 dB(A) Dimensions (H x W x D): 615 x 965 x 200 mm Net weight: 36.2 kg Warranty: 24 months

Read more less

The Ulisse 13DCI closes the gap between mobile monoblock air conditioning units and permanently installed split air conditioning units. It is portable, with the indoor and outdoor units connected by a cooling line. The outdoor unit is placed on the terrace, for example, or can be hung on an outside wall, while the indoor unit is placed in the room or office to be cooled. The advantage of this air conditioning system compared to monoblock air conditioning units is the quiet operating noise and significantly better energy efficiency. The 13DCI works with the latest inverter technology, which means that the performance of the compressor adapts to the effective cooling requirement and therefore does not always run at full power. The setting is simple and convenient using the remote control included in delivery. The target temperature can be selected in 1°C increments between 10°C and 32°C. As with all air conditioning units, whether low target temperatures are actually achieved depends on the size of the room and the amount of heat that enters the room, e.g. from sunlight or devices in the room. "I Feel" function: The device has two measuring points. One on the device itself, a second is on the remote control. With the so-called "I Feel" button, the remote control measures the temperature and controls the air conditioning unit. This means you can put the remote control next to you on the sofa, for example, and always have the optimal temperature wherever you are. The only requirement for the "I Feel" function is direct visual contact between the remote control and the indoor unit. The warm air is sucked in at the front of the indoor unit, cooled and blown into the room at the top front. During the cooling process, excess water is simultaneously removed from the air. This is also fed together with a hose through the connecting line from the indoor to the outdoor unit in front of the fan, where it is automatically nebulized. Important to know when using mobile split air conditioners • The indoor and outdoor units are connected with a copper cooling pipe. Copper is not reversible, which means: if the copper pipe is kinked, it is destroyed and must be replaced (cost for a 2m pipe: CHF 310.-). • If the pipe between the indoor and outdoor units is to be routed through a hole (eg in the wall), it must be separated from the outdoor unit. This requires knowledge of how to handle refrigerant pipes and should be done by a specialist. Otherwise, it is likely that coolant will escape during the separation process, thereby reducing the cooling performance. We have appropriately trained specialists and can offer you both delivery and installation.    Scope of delivery split air conditioning 13dci • Mobile air conditioner WITH WIFI function • Indoor and outdoor unit with 2m cooling line (already connected and ready for use) • Remote control • Cable approx. 2.30 m with Swiss plug (normal socket 230V / three-pin) • User manual in German + IT / FR / EN + other languages latest series We offer the latest series with environmentally friendly R32 refrigerant. The optional extension lines are available with the old R410A or the new R32. When ordering lines, please note which refrigerant is used in your device. Optional accessories extension cables • The length of the cooling line, which is included in the scope of delivery, is 2m. If required, this can be extended with extension lines of 2m or 4m up to a maximum of 6m. wall mount for outdoor unit • If you would like to mount the outdoor unit on a wall, a suitable wall bracket is optionally available from us (CHF 49.-).     SEER: 5.2  Technical data  energy efficiency class A operating modes cooling, ventilation For rooms up to max. 40m² (depending on heat sources) cooling capacity 3920 W / 13340 BTU/h connection voltage 230 Volt - 50 Hz temperature setting range 10° - 32° C power consumption 1600 W Dehumidification capacity approx. 1.9 L/h coolant R32 Operating noise dB(A) (min/max) 37 - 40 (our measurement) 34 - 37 (manufacturer information) air circulation (level 1-2-3) 335-375-400 m³/h service remote control cable included in delivery 2 m (ø40 mm) dimensions of the indoor unit (HxWxD) 79 x 58 x 25 cm Dimensions of the outdoor unit (HxWxD) 49 x 53 x 25 cm Weight of indoor / outdoor unit 42 / 15 kg guarantee 2 years   Quick course on establishing a WIFI connection to Ulisse   Connect the device to the power supply (or unplug and reconnect) Press the on/off button for 5 seconds until the WIFI light flashes. Connect the desired device to the WLAN network «UI_Setup» On the Internet, enter and open the following: 192.168.4.1 Select the WLAN to which the Ulisse must be connected, enter the password, click on “APP Connect”. Change username and password if desired and click on «APP Connect» again Ulisse can now be served

Read more less

This mobile split air conditioning system impresses with its powerful cooling performance and the ability to set up the indoor and outdoor units up to 30 m apart. Thanks to its attractive design and quiet operation, it is ideal for use in representative areas, trade fairs and for cooling shops or fitness centers, for example.   functionality   The air conditioning unit absorbs the heat in a cooling system. From there, the heat is transferred to the self-contained cold water/glycol system. It is then pumped through the outdoor unit, where the water is cooled and the heat is dissipated. It can be used in ambient temperatures of up to 45 °C.   The indoor unit is connected to the outdoor unit via two flexible hoses with quick-release fasteners. These hoses are supplied in lengths of 10 m and can be connected to a maximum length of 30 m. This means that the indoor and outdoor units can be positioned up to 30 meters apart and at different heights (up to 10 meters) if required.     Intelligent control reduces energy consumption The indoor unit is equipped with an EC fan. This means that the speed of the fan intelligently adjusts to the effective cooling requirement. This automatic control minimizes energy consumption and avoids unnecessary noise, so you can work in a quiet environment. In addition, the fan of the outdoor unit dynamically adjusts to the outside temperature, ensuring optimal performance regardless of the weather conditions.     remote monitoring possible   A mobile app allows you to monitor and control operations. Managing multiple devices at the same time is also easy.     Advantages at a glance   • Robust metal construction • Highly efficient cooling circuit • Cooling capacity of up to 7 kW • Air flow rate from 800 to 1450 m³/h • Operating temperatures of up to -5°C • Easy installation without prior training • Quick connectors for cooling lines • Indoor unit with continuously adjustable fan speed and adjustable grille • Remote control via app • Up to 30 meters installation distance between indoor and outdoor units • Slim water and glycol hose connection eliminates the need for large air ducts     scope of delivery 1 x indoor unit 1 x outdoor unit 1 x standard hose set 1 x cable for the electrical connection of indoor and outdoor units 1 x power cable (for indoor unit)   Important  The maximum power consumption is 2950 watts. This means that a type 23 socket (16 amps) is required for operation.   Technical data  operating modes cooling, ventilation For rooms up to max. 150m² (depending on heat sources) Cooling capacity max. cooling capacity at 25 °C 7000 W / 23884 BTU/h 6500 W / 22178 BTU/h connection voltage 230 Volt - 50 Hz operating temperature range -5 °C - +45 °C power consumption max. 2950 W protection class indoor / outdoor unit IP44 / IP55 refrigerant R454C (840 gr), GWP 148 cooling medium of the outdoor unit specification of the glycol 10.5 liters of water, 4.5 liters of glycol monopropylene glycol 1.2 sound level at 1m distance 62 dB (A), manufacturer's specification air circulation min. 800 m³/h - max. 1450 m³/h service Touch Screen + App cable included in delivery 10 m Dimensions of indoor unit (H x W x D) 1025 x 880 x 400 mm Dimensions of outdoor unit (H x W x D) 580 x 700 x 250 mm Weight of indoor / outdoor unit 114 kg / 19 kg guarantee 2 years    

Read more less