Ideal for removing the moist warm air from 2-hose air conditioning systems. In 99% of cases, the exhaust hoses are mounted on an open window. Without an intelligent window duct, such a solution is extremely uneconomical, as warm outside air constantly flows back inside through the window opening, at least partially destroying the cooling performance of the air conditioning unit. In other words: your mobile air conditioning unit not only has to cool the warm air in the room, but also the outside air flowing in. This clever sealing cloth significantly increases energy efficiency.   This practical helper can be attached to any type of window in just a few simple steps and not only reliably prevents warm outside air from flowing back into the air-conditioned interior, but also prevents insects from entering. If installed correctly, the window can be closed as usual without having to remove the fabric.   The translucent fabric is made of a durable and water-repellent material with low thermal conductivity. This increases cooling efficiency and reduces consumption costs. The purchase costs are therefore paid for in a very short time.     Easy installation   The sealing cloth is attached using the Velcro fastener provided, which can be removed at any time, similar to mosquito nets. It can also be easily cleaned in the washing machine.     Suitable for air conditioners with two-hose technology   Air conditioning units with two-hose technology work with two separate air paths. Commercially available window seals normally only have one zipper opening and are therefore not suitable for use with two-hose units. This "Airlock" has two openings, which allow the variable attachment of one or two exhaust hoses. If only one opening is required, the zipper closes the second invisibly and airtight.     Maximum circumference 400 cm   The sum of the three open sides for this model must not exceed 400 cm. If you need a longer cloth, please also consider the "Airlock1000" model.     Advantages at a glance   • Increases cooling performance, reduces energy consumption • Suitable for casement windows, tilt windows and roof windows (must be able to be opened on one side, do not rotate over the axis) • For air conditioning units with single-hose and two-hose technology • Prevents the penetration of warm air and insects • The window can be closed despite the window seal • Pays for itself in a very short time • Easy self-assembly    Trotec article no. 6.100.002.002

Read more less

Ideal for removing the moist warm air from 2-hose air conditioning systems. In 99% of cases, the exhaust hoses are mounted on an open window. Without an intelligent window duct, such a solution is extremely uneconomical, as warm outside air constantly flows back inside through the window opening, at least partially destroying the cooling performance of the air conditioning unit. In other words: your mobile air conditioning unit not only has to cool the warm air in the room, but also the outside air flowing in. This clever sealing cloth significantly increases energy efficiency.   This practical helper can be attached to any type of window in just a few simple steps and not only reliably prevents warm outside air from flowing back into the air-conditioned interior, but also prevents insects from entering. If installed correctly, the window can be closed as usual without having to remove the fabric.   The translucent fabric is made of a durable and water-repellent material with low thermal conductivity. This increases cooling efficiency and reduces consumption costs. The purchase costs are therefore paid for in a very short time.     Easy installation   The sealing cloth is attached using the Velcro fastener provided, which can be removed at any time, similar to mosquito nets. It can also be easily cleaned in the washing machine.     Suitable for air conditioners with two-hose technology   Air conditioning units with two-hose technology work with two separate air paths. Commercially available window seals normally only have one zipper opening and are therefore not suitable for use with two-hose units. This "Airlock" has two openings, which allow the variable attachment of one or two exhaust hoses. If only one opening is required, the zipper closes the second invisibly and airtight.     Maximum circumference 560 cm   The sum of the three open sides for this model must not exceed 560 cm. This is usually enough to enclose even tilted balcony doors. For normal-sized windows, please also consider the "Airlock200" model.     Advantages at a glance   • Increases cooling performance, reduces energy consumption • Suitable for large casement windows, large tilt windows and tilted balcony doors • For air conditioning units with single-hose and two-hose technology • Prevents the penetration of warm air and insects • The window can be closed despite the window seal • Pays for itself in a very short time • Easy self-assembly    Trotec article no. 6.100.002.004

Read more less

This extendable rail simplifies the attachment of the exhaust hose to windows with roller shutters and increases the cooling efficiency of mobile air conditioning systems. It is simply braced into the guide rails on the left and right and can be extended to a width of up to 136 cm. The window cover harmonizes perfectly with white windows and allows the warm air to be discharged through the window in a way that is almost invisible from the outside.   The exhaust hose must have a diameter of Ø15 cm; thinner or thicker hoses do not fit this system. The connection piece can be placed on the left or right side.     Advantages at a glance   • Particularly simple and visually appealing attachment of the exhaust hose to the window • The cooling efficiency of the air conditioning system is increased because less warm air from outside returns to the room • Easy installation without the need for a tradesman • Put an end to exhaust hoses hanging out of the windows • Variable adjustment for window widths from approx. 47 to 136 cm     The following models from our range are compatible:   • Argo: Argo Crono • Trotec: PAC series PAC 2100 X, PAC 2600 X, PAC 3000 X A+, PAC 3500 SH, PAC 3900 X       For casement windows and hinged doors as well as tilt windows and tilt doors, please consider our "HotAirStopper" as a suitable solution.   Trotec article no. 6.100.000.039

Read more less

Extension cable 2 m for Ulisse 13dci, suitable for devices with cooling function (without heating). This connecting line contains copper tubes with coolant and the water hose, which carries the condensate from the inside of the room to the outside (where it is atomized by the ventilation). If you want to lay the line through a wall or extend it, the external unit must be disconnected from the line. This process is possible with a little technical understanding (instructions included). If in doubt, however, we recommend that you call in an air conditioning specialist, as coolant can escape if the work is not carried out correctly. Before disconnecting the external unit, the device should be operated for a few minutes so that pressure builds up in the line and the check valves close cleanly when disconnected. If you have any questions or are unsure, we will be happy to provide you with information. Important The latest Ulisse devices have R32 (propane) coolant. If you want to extend the lines for this version, you absolutely need the R32 line, otherwise the R410A. The coolants are NOT compatible with each other. Therefore, check the type plate of the air conditioner to see which coolant you need. It is NOT possible to exchange opened line packages.  Technical data  Suitable for devices with cooling function (without heating), coolant R32 length 2 m

Read more less

Extension cable 4 m for Ulisse 13dci, suitable for devices with cooling function (without heating). This connecting line contains copper tubes with coolant and the water hose, which carries the condensate from the inside of the room to the outside (where it is atomized by the ventilation). If you want to lay the line through a wall or extend it, the external unit must be disconnected from the line. This process is possible with a little technical understanding (instructions included). If in doubt, however, we recommend that you call in an air conditioning specialist, as coolant can escape if the work is not carried out correctly. Before disconnecting the external unit, the device should be operated for a few minutes so that pressure builds up in the line and the check valves close cleanly when disconnected. If you have any questions or are unsure, we will be happy to provide you with information. Important The latest Ulisse devices have R32 (propane) coolant. If you want to extend the lines for this version, you absolutely need the R32 line, otherwise the R410A. The coolants are NOT compatible with each other. Therefore, check the type plate of the air conditioner to see which coolant you need. It is NOT possible to exchange opened line packages.  Technical data  Suitable for devices with cooling function (without heating), coolant R32 length 4 m

Read more less