individual elements for laundry hanging

Rollers for clothesline system (sold separately) Consists of a sliding roller made of robust plastic, screw and nut. For self-assembly on connecting rails. Suitable for clothesline connecting rails from Dryfix and Krüger SunLine. Available in black, yellow, blue. Technical data Rollers: Nylon, total diameter 2.0 cm, hole diameter 0.9 cm Screws: steel/galvanized, total length 2.4 cm, of which M5 thread 1.1 cm, round bolt 0.8 cm, hexagon crown 0.5 cm

Read more less

3cm spacer rollers for bridging cables or lines. For mounting between the wall and clothesline connecting rails. Made of solid, robust plastic, suitable for all connecting rails in our range. Technical data Length: 30 mm Outside diameter: 25 mm Hole diameter: 10 mm Material / Color: robust plastic, anthracite Weight: 21 gr

Read more less

Chrome-plated rope tensioner This chrome-plated rope tensioner for clotheslines fits the Dryfix, Aerial, Krüger or Roth-Kippe sliding rollers. It is clicked over the last sliding roller and the end of the rope is inserted into the hole. The lever can now be used to give a firm pull across the entire line system. The bracket is then folded over the line and thus maintains the tension. Made in Switzerland. Technical data Made in Switzerland

Read more less

Galvanized rope tensioner (size 2) fits Dryfix, Aerial and Kruger rails galvanized, rustproof. Can be mounted on support rail with screws. Technical data Weight: 0.04kg

Read more less

The aluminum roller brackets are suitable for use wherever there is only space for a few lines, where it is difficult to bridge cables on the wall, or for extending existing clothesline systems. For direct wall mounting without a rail, as shown in the illustration. Complete with: - aluminum angle - sliding roller - suitable screw for fixing to angle - Lock nut (Wall screw not included) Available colors of the castors: black, blue, yellow Technical data Weight: 0.03kg Angle: aluminum, height 2 cm, depth 3 cm, width 2 cm, material thickness 2.5 mm Rollers: Nylon, total diameter 2.0 cm, hole diameter 0.9 cm Screws: steel/galvanized, total length 2.4 cm, of which M5 thread 1.1 cm, round bolt 0.8 cm, hexagon crown 0.5 cm

Read more less

The laundry ropes consist of a robust wire core with a white, UV-resistant plastic coating. Compared to standard nylon laundry ropes, these wire core ropes can be tensioned much more tightly, so that they sag very little even when loaded with a lot of laundry. These ropes also warp very little over time.   The clotheslines are equipped with a loop on one side, which can be hooked onto the first roller of the clothesline system. The other side has no loop, so that the end can be guided into a rope tensioner from where tension can be applied from this point along the entire length of the line.    Characteristics • PVC coated steel wire strand • white, UV-stabilized • Nominal strength 1400 N/mm² • Lengths: 10 / 20 / 30 / 40 / 50 / 70 / 100 / 200m • Total diameter 4mm • Made in Switzerland

Read more less

Dryfix wall brackets (spacers) for connecting rails galvanized, rustproof, for easy bridging of pipes or electrical cables on walls. Available in 3 different lengths. Up to 1.50m rails, 2 pieces per connecting rail are sufficient, above this, 3 brackets are recommended for optimum stability. If you use wall brackets or ceiling telescopes, only metal connecting rails are recommended due to the strong tension of the cable (Dryfix Metal, Dryfix Vario or Krüger), not aluminum rails. These brackets fit all of our metal rails. total length 10 cm = bridging 5 cm) total length 20 cm = bridging 15 cm) Total length = From wall to front console Bridging = free space between the wall and the back of the connecting rail, valid for Dryfix metal and Krüger rails. Dryfix Vario metal rails are slightly narrower, so bridging is +1 cm more, i.e. 6/16/26 cm. Technical data console length / weight: 10 cm / 465 gr. 20 cm / 715 gr.

Read more less

Dryfix Alu connecting rails for clotheslines The Dryfix connecting rails made of solid, beautifully crafted aluminum are suitable for use wherever the clotheslines can be stretched from wall to wall. For this application, they are just as stable as the more expensive metal versions (if you need/want to mount the rails with ceiling or wall brackets, we recommend metal rails such as Dryfix Vario, Dryfix Metall or Krüger due to the strong cable pull). The rails are perforated every 15 cm and can be combined with sliding rollers from the Dryfix, Aerial, Roth-Kippe, Lübra or Krüger systems. Prices (without castors): 0.95 m (for 7 lines) Fr. 28.00 / pc. 1.10 m (for 8 lines) Fr. 32.00 / pc. Rail thickness: 3mm For a complete wall-to-wall system you need: 2 connecting rails, 1 rope (length: room length x number of tracks + 1 x rail width), 1 rope tensioner, sliding rollers (number of tracks x 2), screws, dowels. -> Also note our complete sets Dryfix Alu connecting rails for clotheslines The Dryfix connecting rails made of solid, beautifully crafted aluminum are suitable for use wherever the clotheslines can be stretched from wall to wall. For this application, they are just as stable as the more expensive metal versions (if you need/want to mount the rails with ceiling or wall brackets, we recommend metal rails such as Dryfix Vario, Dryfix Metall or Krüger due to the strong cable pull). The rails are perforated every 15 cm and can be combined with sliding rollers from the Dryfix, Aerial, Roth-Kippe, Lübra or Krüger systems. Prices (without castors): Rail widths: 0.95 m for 7 lines 1.10 m for 8 lines Rail thickness: 3mm For a complete wall-to-wall system you need: 2 connecting rails, 1 rope (length: room length x number of tracks + 1 x rail width), 1 rope tensioner, sliding rollers (number of tracks x 2), screws, dowels. -> Also note our complete sets Technical data Dimensions (H/D): 3cm/3cm Strength: 3 mm Width: Weight : 0.95m 512g

Read more less

Ceiling telescopes for ceiling mounting clothesline systems   With the ceiling telescopes you can hang the connecting rails of your clothesline system down from the ceiling at the right height. The Dryfix and Krüger connecting rails fit these supports.   The ceiling telescopes are made of chrome-plated metal (longest version: galvanized) and offer solid stability and load-bearing capacity of the system. Depending on the room height and the desired height of the lines, 4 versions are available. The telescopes can be adjusted to a precise height within the dimensions described below, although the height cannot be changed after installation: Length 1: adjustable 230-330mm from ceiling Fr. 34.00 Length 2: adjustable 400-600mm from ceiling Fr. 36.00 Length 3: adjustable 550-800mm from ceiling Fr. 39.00 Length 4: adjustable 750-1050mm from ceiling Fr. 58.00   Example: the room is 2.30m high, the lines should be at the standard height of 1.85m. You need a distance of 45cm from the ceiling. The appropriate telescope in this example is therefore length 2.   Please note that mounting directly on the concrete ceiling provides the best stability. If the ceiling is insulated, we recommend cutting out the insulation for stability reasons, mounting the supports directly on the concrete and then closing the recesses again. If mounted on the insulation, the insulation may collapse due to the strong cable tension.   It is also important to note that there are often cables in the ceiling. Drilling deeper than 3cm can damage electrical or water pipes.   How many ceiling mounts are needed? Due to the strong cable pull, we recommend 2 pieces up to 1.50 m rail width (per connecting rail) and 3 pieces for longer rails (per connecting rail)

Read more less

Wall bracket / ceiling support 40 cm made of robust, hot-dip galvanized steel. For attaching clothesline systems to ceilings or for bridging pipes and cables on walls. Optionally with adjustable extension insert, for a maximum extension of 30 cm of the base console. Technical data Weight: 2.3kg

Read more less

Dryfix Vario Metal connecting rails The Dryfix connecting rails made of very stable, galvanized metal are available in various lengths and are suitable for wall-to-wall systems, but also when you mount the rails on ceiling or wall supports. The sliding rollers are already completely assembled at the recommended distance of 15 cm. Available rail widths: Rail width 0.78 m Holes every 15 cm for: 6 lanes Rail width 1.08 m Holes every 15 cm for: 8 lanes Rail width 1.23 m Holes every 15 cm for: 9 lanes Rail width 1.53 m Holes every 15 cm for: 11 lanes/15cm Rail width 1.83 m Holes every 15 cm for: 13 lanes Rail width 2.28 m Holes every 15 cm for: 16 lanes Rail thickness: 4mm -> Also note our complete sets For a complete wall-to-wall system you need: 2 connecting rails, 1 rope (length: room length x number of tracks + 1 x rail width), 1 rope tensioner, sliding rollers (number of tracks x 2), screws, dowels. Technical data Dimensions (depth / height): 3.4cm / 3cm Thickness: 4 mm Width: 0.78m 1.53m 2.28m Weight: 1.39 kg 2.76 kg 4.10 kg

Read more less

Wall bracket made of galvanized steel (rust-proof), with stabilizing support. Length 63 cm, 5 holes, e.g. for attaching castors. This bracket can be used in many different ways: Wall spacers for clothesline rails If thick pipes or air ducts make it impossible to mount the connecting rail directly on the wall, this bracket can be used to bridge a distance of 59 cm from the wall (depending on the clothesline system selected). ceiling telescope If the clothesline system is to be attached to the ceiling on one or both sides. The lowering depth is 60cm and cannot be changed. For example, with a ceiling height of 2.45 m, this results in exactly the standard height of the clothesline of 1.85 m. As smaller laundry hangers on the wall The console is perforated every 12.5 cm so that it can be supplemented with the sliding rollers from Dryfix. This can be used to build a practical junior leash system at hip height or a higher-mounted additional hanger with 5 tracks, for example for bed linen, etc. Please also note our complete junior leash sets. Technical data Material: galvanized metal, rustproof Dimensions base: 18 x 18 cm, 4 holes (10 mm diameter) Length from wall Total: 63 cm Distance of holes from wall: 10 / 22.5 / 35 / 47.5 / 60 cm Can be combined with all systems from Dryfix, Krüger, Lübra and Roth-Kippe.

Read more less