Heating accessories

These easy-to-install aluminum feet fit the smaller heating plates of the TIH-S series (300S/400S).  The aluminum feet are designed so that when the heater is installed along a wall, it maintains the optimal distance from the wall to ensure air circulation and the efficiency of the panel. Which models do these feet fit? The frame of the heating plates is the same thickness on all TIH-S models. As such, these feet fit all sizes. However, for better stability, we recommend the slightly larger, black feet from TIH500S and higher.     product details   • Material: anodized aluminum • Can be used in any room • Easy installation • Maintenance-free • Can be used for the heating plates TIH 300 S and TIH 400 S • Scope of delivery: 1 pair (=2 pieces)   Trotec article no. 1.410.003.001

Read more less

We recommend these stable feet for professional installation of the infrared panels of the TIH-S series. They guarantee a robust stand, especially for the wider models from TIH500S to TIH1100S. They are inserted into the side of the panels and fixed on both sides with four screws each.   The feet are designed in such a way that when the heater is installed along a wall, it maintains the optimal distance from the wall to ensure air circulation and the efficiency of the panel.       product details   • Material: anodized aluminum, black powder-coated • Can be used in any room • Easy installation • Maintenance-free • Can be used for all TIH-S series heating plates • Scope of delivery: 1 pair (=2 pieces)   Trotec article no. 1.410.003.099

Read more less

The Master TH5 thermostat can be used to control the Master B18EPR fan heater depending on the temperature. The switch-off point of the heater is regulated in a range between 0° and +36°C using a continuously variable rotary switch. Without this thermostat, the heater runs in continuous operation, optionally in pure recirculation mode, with 9kW or 18kW heating output. The TH5 has a 3m cable and a suitable plug. It can be plugged directly into the designated slot in the operator area on the back of the heater without any further adjustments to the device. The connection is therefore very easy and self-explanatory. Please note that the Master B18EPR is not suitable for use in rooms above 25°C. However, the thermostat can be used without any problems if the temperature is to be maintained in another room and the heater itself is outside, i.e. if the warm air is blown into the room to be heated via a hose.  Technical data  Contact voltage / current: 230V / 10 A Dimensions (L x W x H) 22 x 15 x 11 mm Weight 1 kg control area 0 - 36°C Application Stepless rotary control is plugged directly into the fan heater cable length 3m Master Article No. 4150.109 guarantee 2 years

Read more less

Made of stainless steel, suitable for example for this indirect oil heater from Master: • BV77

Read more less

Made of stainless steel, suitable for example for these indirect oil heaters from Master: • BV110 • BV170 • BV290E • BV490

Read more less

Reinforced and very flexible air transport hose with a wide range of applications, for example for heating, ventilation or air conditioning.   We recommend using the SP series air transport hoses in combination with the corresponding Trotec connecting pieces.   application examples   • Ventilation and exhaust ventilation in air conditioning and ventilation technology • Building drying, repair of water damage • Winter building heating, stable ventilation, hall and tent heating • Trade fair construction and events • Grain drying • Bulk loading • Tank ventilation and degassing • Silo emptying • Air showers at car washes. • etc.     Technical data   • Temperature range: -20 °C to +80 °C • Can also be used for short periods with hot air up to 100 °C • Particularly robust design made of reinforced, PVC-coated polyamide fabric • Kink-proof and tensile-resistant • Spiral-free sleeves on both sides • With abrasion protection and integrated steel spiral • Bending radius 0.5 x ø • Standard length 7.6 m   Trotec article no. 6.100.001.214

Read more less

This high-strength air hose is ideal for conveying gaseous media in areas where static charge must be avoided, e.g. duct ventilation and de-aeration, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards.   Compared to the antistatic hoses of type SP-AP, the SP-AV hoses also have greater strength due to shorter spiral spacing. This enables installation on the suction side of blowers even at high suction pressure.     Advantages at a glance   • Temperature range: -20 °C to +100 °C • made of antistatic, PVC-coated polyamide fabric • extra robust with high strength • specially designed for suction-side connection at high suction pressure • with abrasion protection and integrated steel spiral • spiral-free sleeves on both sides • Spiral spacing 50 mm • Standard length 7.6 m     We recommend that you only use the SP series air transport hoses in combination with the corresponding connecting pieces.   Trotec article no. 6.100.001.460

Read more less

This high-strength air hose is ideal for conveying gaseous media in areas where static charge must be avoided, e.g. duct ventilation and de-aeration, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards.   Compared to the antistatic hoses of type SP-AP, the SP-AV hoses also have greater strength due to shorter spiral spacing. This enables installation on the suction side of blowers even at high suction pressure.     Advantages at a glance   • Temperature range: -20 °C to +100 °C • made of antistatic, PVC-coated polyamide fabric • extra robust with high strength • specially designed for suction-side connection at high suction pressure • with abrasion protection and integrated steel spiral • spiral-free sleeves on both sides • Spiral spacing 50 mm • Standard length 7.6 m     We recommend that you only use the SP series air transport hoses in combination with the corresponding connecting pieces.   Trotec article no. 6.100.001.470

Read more less

This high-quality air hose is ideal for conveying gaseous media in areas where static charge must be avoided, e.g. duct ventilation and de-aeration, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards.   Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to wider spiral spacing. The AP hoses are therefore ideal for installation on the exhaust side of fans.     Advantages at a glance   • Temperature range: -20 °C to +100 °C • made of antistatic, PVC-coated polyamide fabric • robust with highly flexible • good compressibility • with abrasion protection and integrated steel spiral • spiral-free sleeves on both sides • Spiral spacing 150 mm • Standard length 7.6 m • Bending radius 0.5 x ø     We recommend that you only use the SP series air transport hoses in combination with the corresponding connecting pieces.   Trotec article no. 6.100.001.410

Read more less

This high-strength air hose is ideal for conveying gaseous media in areas where static charge must be avoided, e.g. duct ventilation and de-aeration, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards.   Compared to the antistatic hoses of type SP-AP, the SP-AV hoses also have greater strength due to shorter spiral spacing. This enables installation on the suction side of blowers even at high suction pressure.     Advantages at a glance   • Temperature range: -20 °C to +100 °C • made of antistatic, PVC-coated polyamide fabric • extra robust with high strength • specially designed for suction-side connection at high suction pressure • with abrasion protection and integrated steel spiral • spiral-free sleeves on both sides • Spiral spacing 50 mm • Standard length 7.6 m     We recommend that you only use the SP series air transport hoses in combination with the corresponding connecting pieces.   Trotec article no. 6.100.001.475

Read more less

This high-quality air hose is ideal for conveying gaseous media in areas where static charge must be avoided, e.g. duct ventilation and deaeration, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards.   Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to wider spiral spacing. The AP hoses are therefore ideal for installation on the exhaust side of fans.     Advantages at a glance   • Temperature range: -20 °C to +100 °C • made of antistatic, PVC-coated polyamide fabric • robust with highly flexible • good compressibility • with abrasion protection and integrated steel spiral • spiral-free sleeves on both sides • Spiral spacing 150 mm • Standard length 7.6 m • Bending radius 0.5 x ø     We recommend that you only use the SP series air transport hoses in combination with the corresponding connecting pieces.   Trotec article no. 6.100.001.420

Read more less

This high-quality air hose is ideal for conveying gaseous media in areas where static charge must be avoided, e.g. duct ventilation and de-aeration, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards.   Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to wider spiral spacing. The AP hoses are therefore ideal for installation on the exhaust side of fans.     Advantages at a glance   • Temperature range: -20 °C to +100 °C • made of antistatic, PVC-coated polyamide fabric • robust with highly flexible • good compressibility • with abrasion protection and integrated steel spiral • spiral-free sleeves on both sides • Spiral spacing 150 mm • Standard length 7.6 m • Bending radius 0.5 x ø     We recommend that you only use the SP series air transport hoses in combination with the corresponding connecting pieces.   Trotec article no. 6.100.001.425

Read more less

This high-strength air hose is ideal for conveying gaseous media in areas where static charge must be avoided, e.g. duct ventilation and de-aeration, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards.   Compared to the antistatic hoses of type SP-AP, the SP-AV hoses also have greater strength due to shorter spiral spacing. This enables installation on the suction side of blowers even at high suction pressure.     Advantages at a glance   • Temperature range: -20 °C to +100 °C • made of antistatic, PVC-coated polyamide fabric • extra robust with high strength • specially designed for suction-side connection at high suction pressure • with abrasion protection and integrated steel spiral • spiral-free sleeves on both sides • Spiral spacing 50 mm • Standard length 7.6 m     We recommend that you only use the SP series air transport hoses in combination with the corresponding connecting pieces.   Trotec article no. 6.100.001.480

Read more less

This high-quality air hose is ideal for conveying gaseous media in areas where static charge must be avoided, e.g. duct ventilation and de-aeration, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards.   Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to wider spiral spacing. The AP hoses are therefore ideal for installation on the exhaust side of fans.     Advantages at a glance   • Temperature range: -20 °C to +100 °C • made of antistatic, PVC-coated polyamide fabric • robust with highly flexible • good compressibility • with abrasion protection and integrated steel spiral • spiral-free sleeves on both sides • Spiral spacing 150 mm • Standard length 7.6 m • Bending radius 0.5 x ø     We recommend that you only use the SP series air transport hoses in combination with the corresponding connecting pieces.   Trotec article no. 6.100.001.430

Read more less