State-of-the-art drying technology! The 9 series of Aerial construction dryers was developed completely to meet the needs of use on construction sites, in industry and for drying water damage. The dryers have an MID-approved kWh meter and a non-resettable hour meter as standard. Thanks to the CC 6 control, the devices are compatible with the "Simplify" remote monitoring solution, which allows operation to be conveniently monitored remotely. Due to its high dehumidification performance, the AD-995 is equipped with a water pump as standard. The moist room air is sucked in at the front of the housing and the dry air is blown out to the rear. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device.     service   The device is operated via the control panel on the side. With only three buttons, it is comfortable and easy to use. It shows all the important information and the desired values ​​can be set at the touch of a button. • Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Fully graphical display, no translation required     High service friendliness   The housing was designed so that it can be opened with little effort. This means that internal components can be cleaned quickly and easily or replaced if necessary.     Features at a glance   • CC 6 control unit compatible with the Simplify remote monitoring solution • OEM versions available on request (minimum order quantity 50) • Use of standardized components from the Dantherm Group product portfolio ensures quick access to spare parts • Integrated interface for accessories (dew point kit and external hygrostat) • Equipped with pump set as standard, no bucket • MID-approved kWh meter and non-resettable hour meter as standard • 2-speed fan • Integrated night mode for quieter operation in occupied rooms • R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential) • Large wheels • Telescopic handle • Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range between +5 °C and +30 °C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 95 liters / 24h (power consumption: 1830 W) 20°C / 60% rF = 46.5 liters / 24h (power consumption: 1282 W) (RH=relative humidity)     Technical data  Tension 230V / 50Hz power consumption 1900 W max. sound pressure level 2.5 m distance 64 dB(A) dehumidification performance 76 liters/day (30°C / 80% RH) water pump standard (no bucket), discharge head 4 m air volume level 1 / 2 750 / 900 m³/h (night mode: 750 m³/h) compressor rotary compressor refrigerant R454C Dimensions (H x W x D) 906 x 502 x 547 mm Weight 58.2 kg cessation of operations CC 6 control panel, wireless connection with Simplify remote monitoring possible ambient temperature ambient humidity 5 °C - 30 °C 30% RH - 90% RH Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years

Read more less

State-of-the-art drying technology! The 9 series of Aerial construction dryers was developed completely to meet the needs of use on construction sites, in industry and for drying water damage. The dryers have an MID-approved kWh meter and a non-resettable hour meter as standard. Thanks to the CC 6 control, the devices are compatible with the "Simplify" remote monitoring solution, which allows operation to be conveniently monitored remotely. Due to its high dehumidification performance, the AD-975 is equipped with a water pump as standard. The moist room air is sucked in at the front of the housing and the dry air is blown out to the rear. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device.     service   The device is operated via the control panel on the side. With only three buttons, it is comfortable and easy to use. It shows all the important information and the desired values ​​can be set at the touch of a button. • Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Fully graphical display, no translation required     High service friendliness   The housing was designed so that it can be opened with little effort. This means that internal components can be cleaned quickly and easily or replaced if necessary.     Features at a glance   • CC 6 control unit compatible with the Simplify remote monitoring solution • OEM versions available on request (minimum order quantity 50) • Use of standardized components from the Dantherm Group product portfolio ensures quick access to spare parts • Integrated interface for accessories (dew point kit and external hygrostat) • Equipped with pump set as standard, no bucket • MID-approved kWh meter and non-resettable hour meter as standard • 2-speed fan • Integrated night mode for quieter operation in occupied rooms • R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential) • Large wheels • Telescopic handle • Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range between +5 °C and +30 °C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 76 liters / 24h (power consumption: 1070 W) 20°C / 60% rF = 34.5 liters / 24h (power consumption: 785 W) (RH=relative humidity)     Technical data  Tension 230V / 50Hz power consumption 1070 W max. sound pressure level 2.5 m distance 64 dB(A) dehumidification performance 76 liters/day (30°C / 80% RH) water pump standard (no bucket), discharge head 4 m air volume level 1 / 2 750 / 900 m³/h (night mode: 750 m³/h) compressor rotary compressor refrigerant R454C Dimensions (H x W x D) 906 x 502 x 547 mm Weight 48.3 kg cessation of operations CC 6 control panel, wireless connection with Simplify remote monitoring possible ambient temperature ambient humidity 5 °C - 30 °C 30% RH - 90% RH Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years

Read more less

State-of-the-art drying technology! The 9 series of Aerial construction dryers was developed completely to meet the needs of use on construction sites, in industry and for drying water damage. The dryers have an MID-approved kWh meter and a non-resettable hour meter as standard. Thanks to the CC 6 control, the devices are compatible with the "Simplify" remote monitoring solution, which allows operation to be conveniently monitored remotely. The AD-955 has a 13-litre condensate tank and a connection nozzle for direct drainage of the condensate via a hose. A suitable pump kit is also available, which the device automatically recognises when inserted. The moist room air is sucked in at the front of the housing and the dry air is blown out to the rear. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device.    service   The device is operated via the control panel on the side. With only three buttons, it is comfortable and easy to use. It shows all the important information and the desired values ​​can be set at the touch of a button. • Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Fully graphical display, no translation required     High service friendliness   The housing was designed so that it can be opened with little effort. This means that internal components can be cleaned quickly and easily or replaced if necessary.     Features at a glance   • CC 6 control unit compatible with the Simplify remote monitoring solution • OEM versions available on request (minimum order quantity 50) • Use of standardized components from the Dantherm Group product portfolio ensures quick access to spare parts • Integrated interface for accessories (dew point kit and external hygrostat) • Automatic detection of the pump kit • Various drainage options: standard with Ø15mm hose connection, water tank and optional pump set • MID-approved kWh meter and non-resettable hour meter as standard • 2-speed fan • Integrated night mode for quieter operation in occupied rooms • R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential) • Large wheels • Telescopic handle • Stackable • Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range between +5 °C and +30 °C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 53 liters / 24h (power consumption: 830 W) 20°C / 60% rF = 22.5 liters / 24h (power consumption: 560 W) (RH=relative humidity)     Technical data  Tension 230V / 50Hz power consumption 830 W max. sound pressure level 2.5 m distance 53 dB(A) dehumidification performance 53 liters/day (30°C / 80% RH) condensate tank Approx. 13 liters air volume level 1 / 2 290 / 550 m³/h (night mode: 290 m³/h) compressor rotary compressor refrigerant R454C Dimensions (H x W x D) 845 x 452 x 538 mm Weight 41.8 kg cessation of operations CC 6 control panel, wireless connection with Simplify remote monitoring possible ambient temperature ambient humidity 5 °C - 30 °C 30% RH - 90% RH Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years

Read more less

State-of-the-art drying technology! The 9 series of Aerial construction dryers was developed completely to meet the needs of use on construction sites, in industry and for drying water damage. The dryers have an MID-approved kWh meter and a non-resettable hour meter as standard. Thanks to the CC 6 control, the devices are compatible with the "Simplify" remote monitoring solution, which allows operation to be conveniently monitored remotely. The AD-935S has an 8-litre condensate tank and a connection nozzle for direct drainage of the condensate via a hose. A suitable pump kit is also available, which the device automatically recognises when inserted. The moist room air is sucked in at the front of the housing and the dry air is blown out at the back. The air is blown out via two Ø100mm nozzles, which blow the air out into the room at a good speed. Air hoses can also be attached to these nozzles if the dry air is to be directed precisely to a specific location. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device.    service   The device is operated via the control panel on the side. With only three buttons, it is comfortable and easy to use. It shows all the important information and the desired values ​​can be set at the touch of a button. • Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Fully graphical display, no translation required     High service friendliness   The housing was designed so that it can be opened with little effort. This means that internal components can be cleaned quickly and easily or replaced if necessary.     dehumidification performance The dryer can be used over a temperature range between +5 °C and +30 °C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 28.0 liters / 24h (power consumption: 785 W) 20°C / 60% rF = 13 liters / 24h (power consumption: 560 W) (RH=relative humidity)     Features at a glance   • CC 6 control unit compatible with the Simplify remote monitoring solution • OEM versions available on request (minimum order quantity 50) • Use of standardized components from the Dantherm Group product portfolio ensures quick access to spare parts • Integrated interface for accessories (dew point kit and external hygrostat) • Automatic detection of the pump kit • Various drainage options: standard with Ø15mm hose connection, water tank and optional pump set • MID-approved kWh meter and non-resettable hour meter as standard • 1-speed fan • Integrated night mode for quieter operation in occupied rooms • R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential) • Large wheels • Telescopic handle • Stackable • Equipped with a 1kW electric heating element and 2x Ø100mm duct connections • Maintenance and service friendly     Technical data  Tension 230V / 50Hz power consumption 785 W max. (1785 W with additional heater) additional heating +1000 W sound pressure level 2.5 m distance 53 dB(A) dehumidification performance 28 liters/day (30°C / 80% RH) condensate tank Approx. 8 liters air volume 400 m³/h compressor rotary compressor refrigerant R454C Dimensions (H x W x D) 860 x 391 x 505 mm Weight approx. 36 kg cessation of operations CC 6 control panel, wireless connection with Simplify remote monitoring possible ambient temperature ambient humidity 5 °C - 30 °C 30% RH - 90% RH Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years

Read more less

State-of-the-art drying technology! The 9 series of Aerial construction dryers was developed completely to meet the needs of use on construction sites, in industry and for drying water damage. The dryers have an MID-approved kWh meter and a non-resettable hour meter as standard. Thanks to the CC 6 control, the devices are compatible with the "Simplify" remote monitoring solution, which allows operation to be conveniently monitored remotely. The AD-935 has an 8-litre condensate tank and a connection nozzle for direct drainage of the condensate via a hose. A suitable pump kit is also available, which the device automatically recognises when inserted. The moist room air is sucked in at the front of the housing and the dry air is blown out to the rear. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device.    service   The device is operated via the control panel on the side. With only three buttons, it is comfortable and easy to use. It shows all the important information and the desired values ​​can be set at the touch of a button. • Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Fully graphical display, no translation required     High service friendliness   The housing was designed so that it can be opened with little effort. This means that internal components can be cleaned quickly and easily or replaced if necessary.     Features at a glance   • CC 6 control unit compatible with the Simplify remote monitoring solution • OEM versions available on request (minimum order quantity 50) • Use of standardized components from the Dantherm Group product portfolio ensures quick access to spare parts • Integrated interface for accessories (dew point kit and external hygrostat) • Automatic detection of the pump kit • Various drainage options: standard with Ø15mm hose connection, water tank and optional pump set • MID-approved kWh meter and non-resettable hour meter as standard • 2-speed fan • Integrated night mode for quieter operation in occupied rooms • R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential) • Large wheels • Telescopic handle • Stackable • Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range between +5 °C and +30 °C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 34.0 liters / 24h (power consumption: 610 W) 20°C / 60% rF = 16.5 liters / 24h (power consumption: 450 W) (RH=relative humidity)     Technical data  Tension 230V / 50Hz power consumption 610 W max. sound pressure level 2.5 m distance 51 dB(A) dehumidification performance 34 liters/day (30°C / 80% RH) condensate tank Approx. 8 liters air volume level 1 / 2 300 / 420 m³/h (night mode: 300 m³/h) compressor rotary compressor refrigerant R454C Dimensions (H x W x D) 860 x 392 x 508 mm Weight 35.4 kg cessation of operations CC 6 control panel, wireless connection with Simplify remote monitoring possible ambient temperature ambient humidity 5 °C - 30 °C 30% RH - 90% RH Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years

Read more less

Hard worker among construction dryers! Whether drying out after water damage, drying new buildings or keeping heated and unheated storage rooms dry - the 650S is a universally applicable dehumidifier with high-quality workmanship and reliable operation. It is manufactured in a specialized factory in Europe. It is built to last, easy to care for, rarely needs maintenance and is very affordable considering its power and quality .     Easy operation   The desired target humidity can be continuously regulated between 32 - 100% using a mechanical hygrostat; continuous operation is also possible. The high air circulation volume of an impressive 925 cubic meters per hour is particularly useful in larger zones. With its stable carriage construction and large wheels, frequent changes of location can be carried out very easily.     Direct hose connection and optional pump kit   Due to its very high dehumidification capacity, this dehumidifier has a direct connection for condensate drainage instead of a water tank. The hose must have a gradient towards the drain. If this is not possible, a suitable pump kit is optionally available, with which the water can be pumped up and away.   The operating switch is protected against dust and splash water by a protective cap and a slotted hygrostat rotary switch protects against accidental adjustment of the switch position.     Professional hot gas defrosting   Inside, a professional hot gas automatic defrosting system ensures effective dehumidification results. The finned evaporators are particularly effective in temperatures above 10°C and in humidity levels above 40%. Technically, the dryer can be used at room temperatures down to around 5°C, even in unattended continuous operation.     Optional counters   The delivery does not include an hour or consumption meter. You can order these from us if you wish (the housing is prepared for retrofitting as standard). You can choose between a pure hour meter or the combined dual meter, which measures hours and power consumption. The meters are MID-compliant. Outside Switzerland, dryers used professionally must already be MID-compliant.     Hydrofluoroolefin (R-454C) as an environmentally friendly refrigerant   Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection. The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and is classified as a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).     Advantages at a glance   • High dehumidification performance even at low temperatures • Robust plastic-coated metal housing • Can be transported and stored in any position thanks to the rotary piston compressor • Stable carriage construction • Automatic hygrostat-controlled dehumidification operation • Quality hot gas automatic defrosting • Possibility of retrofitting MID-compliant dual meters for operating hours and kilowatt hours (optional) • Possibility to add a suitable pump kit, which can be connected directly to the device (optional)     Technical data   dehumidification performance at 30 °C / 80 % RH 91 liters / day air volume 925 m³/h Maximum room size 230 m² (550 m³) Minimum room size 4 m² temperature range 5 - 32°C humidity range technically humidity range practice 32 - 90 % RH 40 - 90 % RH voltage 220 - 240 V/50 Hz nominal current consumption max. 9.5 A power consumption max. 2100 W Recommended coverage 16 A cable length approx. 3 m Plug EU plug with Swiss fixed adapter refrigerant R-454C (1050g) GWP 146 water bucket no bucket, only hose connection suitable hose: 16 mm inner diameter operating noise 56 dB(A) at 1 m distance 53 dB(A) at 2.5 m distance Dimensions D x W x H 616 x 511 x 1022 mm (including guide bracket) Weight 52 kg defrosting automatic hot gas automatic dehumidification hygrostat-controlled fan axial, 1-stage fan prefilter Yes timer no (operation with timer possible) continuous operation possible Yes memory function yes (saves set values ​​mechanically) hose connection yes (no hose included) - 16 mm pump optionally available (not included) guarantee 2 years

Read more less

Very powerful dehumidifier for demanding dehumidification tasks in a temperate environment. Ideal for drying water damage, for building drying for larger or very humid rooms. Due to its high performance, this dryer is only available with a hose connection, i.e. without a water tank. The device is also ideal for construction sites and for drying wood.   Dehumidification capacity of up to 100 liters per day Overview of the approximate dehumidification quantities in liters per day at different room temperatures and humidity: 30°C: 80% moist: 100 liters (60%: 47 L.) 20°C: 80% moist: 47 liters (60%: 27 L.) 15°C: 80% moisture: 35 liters (60%: 19 L.) 10°C: 80% moisture: 19 liters (60%: 13 L.) Quality product, which is mostly sold through specialist retailers throughout Europe. Quality standards include: durability, compliance with the specified performance, CFC-free, TÜV + GS + EMC + CE tested, ISO certified, recyclable materials, etc. Devices with comparable performance usually cost several times more. Characteristics • Dehumidification capacity of up to 120 liters per day • Electric hygrostat (LED) for regulating and setting the desired humidity • Function for continuous operation/continuous dehumidification; • Memory function for saving data and for automatic continuation of operation after a power failure • Clear display including actual humidity, target humidity and status overview • separate consumption meter kWh • Equipped with a highly efficient rotary compressor. This TÜV and CE tested compressor is one of the most powerful compressors on the market • Automatic professional defrost function • Humidity control of seamless 1% steps between 30% - 90% (plus continuous operation function) • Powder-coated metal housing/metal frame • Very easy mobility thanks to transport handles and large wheels for safe travel over steps and uneven ground. However, note the weight (60kg). • Operating warning light / defrost light • Maintenance-free / No separate or renewed coolant is required (closed circuit) • Air filter grille that can be cleaned • The device is ready for use immediately (no installation or assembly required). • Swiss plug 230 V • CFC free and compliance with WEEE standards usage examples Construction dryer: Ideal for quickly drying concrete, basements, plaster, screed, water damage, etc. Damage repair: After flooding or damage caused by extinguishing water, these devices are ideal for drying (professionals as well as insurance companies use these devices.) Climate control: For all rooms, halls as well as for use at work and for hobbies, etc. Important The powerful compressor operates at a noise level of around 70 dB and is therefore not suitable for use in noise-sensitive areas. The fuses must release 9 amps or more, which is usually the case with a normal socket. At temperatures below 10°C the Akto1200 can freeze. In cold environments we recommend the model Fral F96 -> Construction dryer F96 as an alternative.     Technical data   Tension 220-240V / 50Hz power consumption max. 1840W (8.3 A) / 1560W (7.1 A) (at 20°C/60% RH) sound pressure level 1 m distance 70 dB(A) 2.5m distance 67 dB(A) (our measurement) dehumidification performance 100 liters/day (30°C / 80% RH) amount of recirculated air 1000 m³/h (free blowing) condensate tank No tank / only hose connection possible compressor rotary compressor refrigerant R454C (1kg), GWP: 148 Dimensions (H x W x D) 1110 x 630 x 470 mm Weight 60 kg cessation of operations predefined values ​​at the touch of a button / digital display ambient temperature 10°C ~ 32°C (our recommendation) application area Rooms from min. 4m² to max. 300m² (750m³) Swiss plug Yes hose connection Yes operating hour meter Yes guarantee 2 years series WDH-1200HT

Read more less

A very powerful construction dryer with brute dehumidification power. Perfect for drying large construction sites and for effectively drying out water damage. This dehumidifier has consistently omitted everything that is unnecessary for continuous use. It has neither a display nor a hygrostat (a plug-in hygrostat can be ordered optionally if required). This makes it very easy to use, safe from tampering and extremely affordable for this performance class. On the other hand, everything you need for fast drying is there: powerful dehumidification performance, hot gas defrosting, hour counter as well as large rollers and a guide bar for easy mobility on construction and damage sites.     Easy operation   It's very easy to set up. Set it up - connect the hose - plug it in - turn the main switch - done!   The operation will now continue until the dryer is uninstalled again. As long as the device is connected to the power supply, it will run reliably and there are no settings that can be changed or manipulated by mistake. This also applies in the event of a power failure: when the power comes back on, the dehumidifier will continue its task with the same settings.   Thanks to the professional hot gas automation, it can also be used in cooler environments without any problems, although the dehumidification power decreases at cold temperatures, as with all condensation dryers. The built-in finned evaporator (cooling element) has an extremely high efficiency in temperate environments and can dry the air to just under 40% RH. The dryer is also equipped with a rotary piston compressor. This means that it can be transported and stored in any position.     Optional hygrostat   Should a hygrostat be required at some point to regulate the target humidity, the dryer is prepared so that the Trotec hygrostat HG110 can be connected directly using a jack plug. Please note the accessories.     Direct hose connection   With dryers of this strength, collecting water in an integrated bucket makes little sense, as this would constantly fill up. The water extracted from the air is therefore drained away via a directly connected hose. The hose must be laid in a downward direction, as there is no pump integrated into the dryer. Free-standing condensate pumps are optionally available if the water needs to be pumped up or out.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be determined precisely using the hour counter that is integrated as standard. This is particularly useful for commercial applications. Thanks to the counter, it is also possible to determine whether the device was always in operation or whether it was switched off accidentally or intentionally.     Hydrofluoroolefin (R-454C) as an environmentally friendly refrigerant in dehumidifiers   Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection.   The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and is classified as a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).   Additional benefit for the environment: Due to its excellent thermodynamic properties, hydrofluoroolefin (R-454C) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.   Advantages at a glance   • Affordable price with strong performance in the commercial sector • Can also be used in cooler environments thanks to hot gas defrosting • Robust steel construction with large rollers and guide bar • Suitable for continuous operation • Can be transported and stored in any position thanks to the rotary piston compressor • External hygrostat connection     Technical data   dehumidification performance at 30 °C / 80 % RH 100 liters / day air volume 1000 m³/h Maximum room size 250 m² (750 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C humidity range technically humidity range practice 30 - 90 % RH 40 - 90% RH (finned evaporator) voltage 220 - 240 V/50 Hz nominal current consumption max. 8.1 A power consumption max. 1920W Recommended coverage 16 A cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R454C (1000g) GWP146 water bucket no bucket operating noise 67 dB(A) at 1 m distance 64 dB(A) at 2.5 m distance Dimensions D x W x H 538 x 698 x 1006 mm including guide bar and rollers Weight 64 kg defrosting automatic hot gas automatic dehumidification Continuous operation, a plug-in mechanical hygrostat is available as an option. fan radial, 1-stage fan prefilter Yes operating hour meter Yes continuous operation possible Yes display no memory function yes (saves set values ​​automatically) hose connection yes, not included in delivery (suitable inner diameter: 12mm) guarantee 2 years

Read more less

The robust and powerful all-rounder   Whether drying out after water damage, drying out new buildings or keeping heated and unheated storage rooms dry - the 350S is a universally applicable dehumidifier with high-quality workmanship and reliable operation. It is manufactured in a specialized factory in Europe. It is built to last, is easy to care for, requires little maintenance and is very affordable considering its power and quality.  Easy operation  The desired target humidity can be continuously regulated between 32 - 100% using a mechanical hygrostat; continuous operation is also possible. With the finned evaporator used, target humidity levels below 40% RH are difficult to achieve, but this technology shows impressive dehumidification power in temperate and humid environments. The high air circulation volume of an impressive 1000 cubic meters per hour is particularly useful in larger zones. With its stable carriage construction and large impellers, frequent changes of location can be carried out very easily.  bucket, direct hose connection and optional pump kit  The water that is extracted from the air flows into the 6-litre bucket. This is on a scale that automatically stops operation when it is full. A control lamp indicates that the bucket is full. It is also possible to connect a hose if the water can be drained away directly. In this case, the hose must have a gradient towards the drain. If this is not possible, a suitable pump kit is available as an option, with which the water can be pumped up and away. The operating switch and level warning light are protected against dust and splash water by a protective cap and a slotted hygrostat rotary switch protects against accidental adjustment of the switch position.     For continuous operation on construction sites   Thanks to the option of connecting an external condensate drain – with an optional condensate pump if required – the construction dryer is also ideal for longer, unattended drying tasks, e.g. during construction drying.     Optional counters  The delivery does not include an hour or consumption meter. You can order these from us if you wish (the housing is prepared for retrofitting as standard). You can choose between a pure hour meter or the combined dual meter, which measures hours and power consumption. The meters are MID-compliant. Outside Switzerland, dryers used professionally must already be MID-compliant.     Hydrofluoroolefin (R-454C) as an environmentally friendly refrigerant in dehumidifiers   Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection.   The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and is classified as a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).   Additional benefit for the environment: Due to its excellent thermodynamic properties, hydrofluoroolefin (R-454C) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.     Advantages at a glance • High dehumidification performance even at low temperatures • Robust plastic-coated metal housing • Can be transported and stored in any position thanks to the rotary piston compressor • Stable carriage construction • Automatic hygrostat-controlled dehumidification operation • Quality hot gas automatic defrosting • Possibility of retrofitting MID-compliant dual meters for operating hours and kilowatt hours (optional) • Possibility to add a suitable pump kit, which can be connected directly to the device (optional)     Technical data   dehumidification performance at 30 °C / 80 % RH 55 liters / day air volume 1000 m³/h Maximum room size 140 m² (350 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 32°C humidity range technically humidity range practice 32 - 90 % RH 40 - 90 % RH voltage 220 - 240 V/50 Hz nominal current consumption max. 6.1 A power consumption max. 1400W Recommended coverage 10 A cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R454C (650g) GWP146 water bucket 6 liters operating noise 54 dB(A) at 1 m distance 51 dB(A) at 2.5 m distance Dimensions D x W x H 530 x 500 x 965 mm (including guide bracket) Weight 39 kg defrosting automatic hot gas automatic dehumidification hygrostat-controlled fan axial, 1-stage fan automatic shutdown when bucket is full Yes prefilter Yes timer no (operation with timer possible) continuous operation possible Yes memory function yes (saves set values ​​mechanically) hose connection yes (no hose included) pump optionally available (not included) guarantee 2 years

Read more less

Professional construction dryer with large bucket   A high-quality dehumidifier for commercial use and for drying out water damage, made in Europe. Its impressive external appearance is in no way inferior to its inner values: All electrical components are specially encapsulated and thus protect the electronics from harmful deposits that could impair their function and longevity. This dryer is therefore also ideal for use under demanding conditions. Thanks to its maintenance-friendly design, it is easy to care for.   Compared to cheaper reciprocating piston compressors, the high-quality 0.58 kW rotary compressor installed here offers the advantage of higher performance with comparatively lower power consumption - and also creates reserves for high dehumidification performance even in unheated rooms. In addition, the high-quality hot gas automatic defrosting system ensures a much more efficient dehumidification performance compared to other defrosting systems, without time-related defrost breaks during which no dehumidification takes place.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and is a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Additional benefit for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.     User-friendly   Thanks to its robust housing, ergonomic recessed handles with an internal grip clip and four stable steering wheels with roll stops, the device is ideal for use on construction sites and for drying water damage. However, these advantages are also appreciated in commercial premises or in private basements.   The storage is also well thought out: two practical stacking grooves on the top of the device enable stable and space-saving stacking during transport and in storage.     An integrated operating hour counter reliably documents the exact operating time, even during longer drying operations.     Integrated compressor heat protection with automatic switch-off   When drying with extremely high humidity and high temperatures - for example when repairing water damage - refrigeration dryers quickly reach their red performance range. The catchy "35 rule" applies here: drying water damage at temperatures above 35 degrees reduces the dryer's service life to less than 35%. However, this is not a question of component quality, but pure physics, which applies to all refrigeration dryers on the market regardless of the manufacturer. While most professional condenser dryers can still work easily up to 35 °C at moderate humidity of around 70% RH, very high humidity combined with a high room temperature means that significantly more energy is added to the moist room air, which must also be "worked off" via the refrigerant. As a result, the pressure of the refrigerant in the system increases immensely, which leads to a destructive load on the compressor. The dehumidifiers will initially continue to work, but well above their limit "deep in the dark red range", which results in an extremely shortened remaining service life. That's why the TTK-S series commercial dehumidifiers have integrated compressor heat protection to actively preserve the value of your devices: Sensors constantly monitor the heat load of the compressor. If the temperature is within the defined working range, the integrated heat protection display pulses in a long sequence, indicating that the dehumidifier is operating optimally. As soon as the temperature exceeds the critical limit of 35 °C, the automatic system switches the compressor off to protect it, while the fan continues to operate, and automatically reactivates the compressor as soon as the temperature falls below the 35° limit again. This protection not only significantly extends the service life of the dehumidifier, it also prevents thermal damage to materials in the room and the building structure when they are in use.     options   • Dual meter available for additional recording of power consumption. • powerful condensate pump for permanent drying with a pumping capacity of up to 50 m and a maximum discharge head of 4 m     Advantages at a glance • High dehumidification performance even at low temperatures • Maximum dust and moisture protection for all electrical components • Extremely maintenance-friendly design • Optimal handling properties • Can be transported and stored in any position thanks to the rotary piston compressor • Practical stacking groove for stable, space-saving storage and transport • Multi-stacking capability with identical models • Practice-optimized industrial design • Made in Europe     Technical data   dehumidification performance at 30 °C / 80 % RH 28 liters / day air volume 250 m³/h Maximum room size 70 m² (175 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C humidity range 35 - 90 % RH voltage 220 - 240 V/50 Hz nominal current consumption max. 2.3 A power consumption max. 500W Recommended coverage 10 A cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R290 (150g) GWP3 water bucket 6 liters operating noise 52 dB(A) at 1 m distance 49 dB(A) at 2.5 m distance Dimensions L x W x H 375 x 345 x 603 mm Weight 26 kg defrosting automatic hot gas automatic dehumidification hygrostat-controlled fan axial, 1-stage fan automatic shutdown when bucket is full Yes prefilter Yes timer no continuous operation possible Yes memory function yes (saves set values ​​mechanically) hose connection yes, short hose piece included guarantee 2 years    

Read more less

With its powerful dehumidification performance, this professional construction dryer can handle even the most demanding tasks. The integrated condensate water pump ensures comfortable operation, as the water that accumulates is automatically drained away. You also get other professional functions such as an operating hour counter, a temperature display, a humidity display and an automatic defrost function. Considering its dehumidification power, it is economical in consumption and has the new refrigerant "R290", which has a minimal impact on the environment. The "Global Warming Potential (GWP)" is 3, which corresponds to a reduction of 99.85% compared to comparable models of previous generations. service The control panel is located at the front of the housing and offers various options:     setting target humidity The desired target humidity is set at the touch of a button, i.e. the value at which the device should keep the room stable. If the measured humidity in the room is higher, the device will operate. If the humidity is correct, the device pauses, and not only the compressor but also the fan stops. The desired target humidity can be selected in 5% increments between 10 - 90%, with the setting at 10% corresponding to continuous operation. To protect a room from mold and odors, a value of around 60% is sufficient, so the ideal setting is 50 or 55%. Lower values ​​do not provide any additional benefit, unless you are drying out water damage.  timer With the timer, operation can either be limited to a time "from now" (1-24 hours) or started at a time 1-24 hours in the future, for example if you want to start operation at the low tariff.  memory function If you want to run the device at the same time every day (for example during off-peak hours), you can do this with a standard timer. The dryer remembers the last setting and returns with the same settings after a power outage.     pump  Instead of a bucket, this model has an integrated water pump that pumps away the condensate that is removed. The hose included in the delivery is 7.5m, but can also be extended. If the hose is laid flat, the water can easily cover distances of up to 20m. When pumping upwards, the possible distance is reduced depending on the height difference. A check valve prevents water standing in the hose from flowing back into the device. The device itself contains a small tank that can be completely pumped out at the touch of a button before transport.     Advantages at a glance   • Dehumidification capacity of up to 65 liters/day • Professional operating hour counter for monitoring the operating time • The delivery includes 7.5 meters of condensate hose including a check valve • Temperature display (input / output) to monitor the ambient conditions • Integrated pump function that allows you to pump out the condensate up to a discharge height of 3 meters • Automatic continuation of operation after a power failure • Equipped with a highly efficient rotary compressor for maximum performance and energy efficiency • Clear LED display including humidity indicator for easy operation and control • Humidity control in 5% steps between 10% to 90% for precise drying results • Automatic professional defrost function to prevent ice formation in the cooling system • Timer function per hour for flexible drying time • Stackable to save space for easy transport and storage • Two semi-pneumatic tires for easy transport • CE (EMC + LVD) conformity and “GS” tested.     scope of delivery   • Construction dryer • Power cable • Condensate hose with check valve • Operating instructions   dehumidification performance The dryer can be used over a wide temperature range between +5°C and +35°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of approximate dehumidification performance under different (constant) ambient conditions: 30 °C: 80% humid: 65 liters / 24 hours - 60% humid: 42 liters / 24 hours 20 °C: 80% moisture: 32 liters / 24 hours - 60% moisture: 24 liters / 24 hours 15 °C: 80% moisture: 23 liters / 24 hours - 60% moisture: 17 liters / 24 hours 10 °C: 80% moisture: 13 liters / 24 hours - 60% moisture: 12 liters / 24 hours    Technical data  Tension 220-240V / 50Hz power consumption max. 850 (3.7 A) or 710W (3.1 A) at 20°C/60% RH sound pressure level 55 dB(A) (manufacturer's information) dehumidification performance max. 65 liters/day (30°C / 80% RH) amount of recirculated air 350 m³/h, 1 ventilation level condensate tank No tank, integrated pump with 7.5 m hose compressor rotary compressor refrigerant R290C (250gr.) Dimensions (H x W x L) 470 x 325 x 600 mm Weight: 39 kg Operating setting: Digital control panel Ambient temperature: 5°C ~ 35°C Application area: up to 150 m² Swiss plug: EU plug with fixed adapter for Switzerland hose connection: Yes Guarantee: 2 years

Read more less

The universal all-rounder   Whether drying out after water damage, drying out new buildings or keeping heated and unheated storage rooms dry - the 170S is a universally applicable dehumidifier with high-quality workmanship and reliable operation. It is manufactured in a specialized factory in Europe. It is built to last, is easy to care for, requires little maintenance and is very affordable considering its power and quality .     Easy operation   The desired target humidity can be continuously regulated between 32 - 100% using a mechanical hygrostat; continuous operation is also possible. The high air circulation volume of an impressive 580 cubic meters per hour is particularly useful in larger zones. With its stable carriage construction and large wheels, frequent changes of location can be carried out very easily.     bucket, direct hose connection and optional pump kit   The water that is extracted from the air flows into the 6-litre bucket. This is on a scale that automatically stops operation when it is full. A control lamp indicates that the bucket is full. It is also possible to connect a hose if the water can be drained away directly. In this case, the hose must have a gradient towards the drain. If this is not possible, a suitable pump kit is available as an option, with which the water can be pumped up and away.   The operating switch and level warning light are protected against dust and splash water by a protective cap and a slotted hygrostat rotary switch protects against accidental adjustment of the switch position.     Professional hot gas defrosting   Inside, a professional hot gas automatic defrosting system ensures effective dehumidification results. The finned evaporators are particularly effective in temperatures above 10°C and in humidity levels above 40%. Technically, the dryer can also be used in lower temperatures down to around 5°C, even in unattended continuous operation.     Optional counters   The delivery does not include an hour or consumption meter. You can order these from us if you wish (the housing is prepared for retrofitting as standard). You can choose between a pure hour meter or the combined dual meter, which measures hours and power consumption. The meters are MID-compliant. Outside Switzerland, dryers used professionally must already be MID-compliant.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and is a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Additional benefit for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.     Advantages at a glance   • High dehumidification performance even at low temperatures • Robust plastic-coated metal housing • Can be transported and stored in any position thanks to the rotary piston compressor • Stable carriage construction • Automatic hygrostat-controlled dehumidification operation • Quality hot gas automatic defrosting • Possibility of retrofitting MID-compliant dual meters for operating hours and kilowatt hours (optional) • Possibility to add a suitable pump kit, which can be connected directly to the device (optional)     Technical data   dehumidification performance at 30 °C / 80 % RH 40 liters / day air volume 580 m³/h Maximum room size 100 m² (250 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 32°C humidity range technically humidity range practice 32 - 90 % RH 40 - 90 % RH voltage 220 - 240 V/50 Hz nominal current consumption max. 2.8 A power consumption max. 600W Recommended coverage 10 A cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R290 (150g) GWP3 water bucket 6 liters operating noise 52 dB(A) at 1 m distance 49 dB(A) at 2.5 m distance Dimensions D x W x H 540 x 490 x 963 mm (including guide bracket) Weight 32 kg defrosting automatic hot gas automatic dehumidification hygrostat-controlled fan axial, 1-stage fan automatic shutdown when bucket is full Yes prefilter Yes timer no (operation with timer possible) continuous operation possible Yes memory function yes (saves set values ​​mechanically) hose connection yes (no hose included) - 12 mm pump optionally available (not included) guarantee 2 years

Read more less

Perfect all-rounder for construction, trade and water damage restoration   This Trotec dehumidifier impresses with its powerful dehumidification performance combined with a strong fan that blows the dried air back into the room at high speed. This means that the room air is circulated optimally and drying is significantly faster, especially in large, very humid archive and storage rooms or those with shelves.   The trolley construction with guide handles, carrying troughs and large wheels facilitates transport even in difficult terrain or on steps.   The dryer has an easy-care control panel with a digital display of all functions for quick start-up. For hygrostat-controlled automatic operation, the target can be preselected in percentage increments, which is then displayed together with the current actual value. The selectable target humidity range is 20 - 90%, although in practice values ​​below 35% are difficult to achieve. This device develops its full power in rooms that are at least slightly temperate; 12 °C or higher is ideal.   The timer can be used to configure the switch-on or switch-off time, and thanks to the integrated memory function, the settings are retained even after a power failure. This means that operation with a timer is also possible.     bucket and direct hose connection The water extracted from the air is collected in a 5.5 liter bucket. A magnetic float automatically stops operation when the bucket is full and a warning light indicates visually that the bucket should be emptied. A hose can be connected to the bucket itself if necessary if the water can be drained away directly. The hose must be laid in a downward direction as there is no pump integrated into the dryer (we can optionally supply a free-standing condensate pump if the water can or should be pumped up or away.     With optional air hose connection for cavity drying   Whether in suspended ceilings, bathtub cavities, cassette walls or cable ducts - if moisture has penetrated into hard-to-reach cavities, action should be taken quickly to prevent mold from forming. This dehumidifier is also suitable for this, as it is equipped with a particularly powerful fan with 3.2 MPa air pressure. An air hose with a suitable adapter can optionally be attached to this so that the dry air is directed precisely to the damp areas.   Note: If there is a lot of dirt, dust or mold in the cavity, the room should not be occupied or used during this drying process, as otherwise the dust particles and mold spores can spread everywhere. In this case, the additional use of an air purifier is recommended.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection.   The natural refrigerant propane (R290) is an organic compound and is classified as a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Additional benefit for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.     Advantages at a glance   • Particularly economical solution for typical dehumidification applications in the commercial sector • High dehumidification performance even at low temperatures • Air hose connection for selective dry air application or cavity drying • Robust steel construction in trolley design • Can be transported and stored in any position thanks to the rotary piston compressor • Timer function • Memory function (auto-restart function) • Permanent mode for continuous operation • Maintenance-friendly magnetic locking door   Technical data   dehumidification performance at 30 °C / 80 % RH 51 liters / day air volume 450 m³/h Maximum room size 130 m² (330 m³) Minimum room size 12 m² (30 m³) temperature range 5 - 30°C humidity range technically humidity range practice 20 - 90 % RH 35 - 90% RH (finned evaporator) voltage 220 - 240 V/50 Hz nominal current consumption max. 2.7 A power consumption max. 650W Recommended coverage 10 A cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5.5 liters operating noise 52 dB(A) at 1 m distance 49 dB(A) at 2.5 m distance Dimensions D x W x H 525 x 490 x 900 mm Weight 40 kg defrosting automatic recirculation, electronic automatic dehumidification hygrostat-controlled fan radial, 1-stage fan automatic shutdown when bucket is full Yes prefilter Yes timer Yes continuous operation possible Yes display shows current room humidity, set humidity memory function yes (saves set values ​​automatically) hose connection yes, no hose included guarantee 2 years

Read more less

The Quadro X80 is a very powerful dehumidifier with a semi-professional design. The metal casing and the internal components are solid and durable. The X80 is particularly efficient in a classic basement environment, but also economical in consumption. service The target humidity can be set using the clear control panel on the top of the device. Once the target humidity is reached, the dehumidification operation pauses while only the ventilation continues to determine the current humidity. Various setting options are available:  continuous operation The device runs continuously and ignores the measured room humidity. This setting is useful if you want to dry laundry or when drying water damage.  Operation with selected target humidity 30 – 90% Any target humidity value between 30% and 90% can be selected at the touch of a button (5% increments). To prevent mold and odors, it is sufficient to maintain a humidity of around 60%. The ideal setting is therefore 55 or 60%. For economical operation, the software has a tolerance of 6% so that the compressor does not start at too short intervals. The set target humidity value corresponds to the average value +-3%. This means that the drying process runs until the set value is undershot by 3%. The operation then pauses until the set value is overshot by 3%. So if you select 55%, for example, the room humidity fluctuates between min. 52% - max. 58%. comfort mode The "Dryfix Intelligence" control automatically optimizes operation taking the room temperature into account: - If the ambient temperature is below 5° C, the compressor stops to prevent the unit from icing up. - When the ambient temperature is higher than 5°C and lower than 20°C, the device operates with a target humidity of 60%. - When the ambient temperature is higher than 20°C and lower than 27°C, the device operates with a target humidity of 55%. - If the ambient temperature is higher than 27° C, the device operates with a target humidity of 50%. large tank The condensate tank, which is inserted at the back, holds 6.5 liters and stops operation when it is full using the integrated float magnetically. The fill level is immediately visible on the front of the device: blue light = operation in progress, red light = tank full or not inserted correctly (operation is interrupted). The hose connection is located directly above the tank, through which the condensate can also be drained directly into a drain (suitable hose: 10 mm inner diameter).  Two ventilation levels The air flow is powerful. The slats at the top of the device can also be used to direct the dry air in a certain direction. This is very useful if, for example, you want to blow into a laundry line or onto a damp wall. Due to the powerful ventilation, the operating noise is easily audible (a noise comparable to that of a steam extractor). At the touch of a button, you can choose between weak (quieter) or strong ventilation. With this model, the compressor (= dehumidification) stops when the desired humidity is reached, while the fan runs continuously to circulate the room air. Features & advantages over other dehumidifiers: • Digital control panel for regulating the desired humidity • Automatic function, ie the dehumidification mode switches off automatically when the target humidity level is reached and also switches on again automatically when it becomes more humid (including a +/- 6% power saving function so that the device does not switch on and off unnecessarily often. • Automatic professional defrost function • Suitable for unattended use • Also suitable for continuous operation/continuous dehumidification • Optimized for use in classic basement environments • Low power consumption compared to the powerful performance • Equipped with a very reliable quality brand compressor • Comfort program with protection at unsuitably cold room temperatures • No adjustments in the event of a power failure (device continues where it was interrupted) • Auto-stop when condensate tank is full including warning light • Removable 6.5 liter condensate tank • Possibility of connecting a hose for continuous drainage of the condensate. • Absolutely maintenance-free / No separate or renewed coolant is required (closed circuit) • Very easy mobility thanks to side handles and castors • Washable air filter • Modern design and attractive appearance • The device is ready for use immediately (no installation or assembly required) • CFC free • CE, GS and RoHS tested • Latest, environmentally friendly refrigerant R290 (GWP: 3) usage examples Cellar damp : Ideal for damp cellars, old walls and laundry rooms. Eliminates musty smells, stops mold growth, decomposition of masonry and much more. Mobile clothes dryer : the device is also very popular as a mobile clothes dryer. Close the laundry room windows and doors and, depending on the size of the laundry room, the laundry will dry overnight. dehumidification performance The dryer can be used over a wide temperature range between +7°C and +35°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% humid: 80 liters (90%: 88 liters, 60%: 44 liters) 20°C / 80% humid: 44 liters (90%: 56 liters, 60%: 28 liters) 15°C / 80% humid: 36 liters (90%: 44 liters, 60%: 20 liters) 10°C / 80% humid: 24 liters (90%: 32 liters, 60%: 16 liters) 5°C / 80% humid: 18 liters (90%: 22 liters, 60%: 10 liters) HEPA filter option In addition to the standard filter, which filters dust out of the air, a HEPA filter can be ordered for the X80. This HEPA filter cleans the air every time it passes through the device with a purity rate of almost 100%. This means that even the finest particles such as pollen, fine dust, mold spores and other tiny contaminants are intercepted. Also viruses of all kinds (including corona). The filter is therefore highly recommended, for example in basements with mold infestation, but also when drying laundry so that flying pollen is not blown through the hanging laundry and contaminates it (e.g. in the case of pollen allergy). The HEPA filter is a consumable and cannot be washed. The price of CHF 38 includes the filter with holder. For repeat orders, the filter alone without holder can be reordered at a reduced price of CHF 29. scope of delivery Plug-in ready device, no assembly required. The optional HEPA filter is not included in the basic package.  Technical data  Tension 220V-240V / 50Hz power consumption max. 1291W max. / 940W (at 20°C/60% RH) sound pressure level 1 m distance 56 dB(A) (our measurement) 2.5 m distance 54 dB(A) (our measurement) dehumidification performance 80 liters/day (30°C / 80% RH) condensate tank Approx. 6.5 liters compressor rotary compressor refrigerant R290 / 180 g Dimensions (H x W x D) 64.5 x 40 x 31 cm Weight 24 kg cessation of operations Digital ambient temperature Manufacturer's information: 5°C - 35°C (our recommendation: 7°C ~ 35°C) application area general room dehumidification: up to approx. 200m² Laundry drying: dries 6-8 washing machine loads per day Swiss plug: Yes hose connection Yes guarantee 2 years

Read more less

A good, affordable racehorse for construction dryers and water damage repairers. Everything that is unnecessary for continuous use has been consistently left out of this dehumidifier. It has neither a display nor a hygrostat (a plug-in hygrostat can be ordered as an option if required). This makes it very easy to use, safe from tampering and extremely affordable. On the other hand, everything that is needed for effective and fast drying is there: powerful dehumidification performance, hot gas defrosting, hour counter as well as large rollers and a guide bar for easy mobility on construction and damage sites.     Easy operation   Commissioning is child's play. Plug in, flip the main switch, and you're done!   The operation will now continue until either the bucket is full or until the dryer is uninstalled. As long as the device is connected to the power supply, it will run reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power failure: if the power comes back on, the dehumidifier will continue its task with the same settings.   Thanks to the professional hot gas automation, it can also be used in cooler environments without any problems, although the dehumidification power decreases at cold temperatures, as with all condensation dryers. The built-in finned evaporator (cooling element) has an extremely high efficiency in temperate environments and can dry the air to just under 40% RH. The dryer is also equipped with a rotary piston compressor. This means that it can be transported and stored in any position.     Optional hygrostat   Should a hygrostat be required at some point to regulate the target humidity, the dryer is prepared so that the Trotec hygrostat HG110 can be connected directly using a jack plug. Please note the accessories.     bucket and direct hose connection   The water extracted from the air is collected in a 5-litre bucket. A magnetic float automatically stops operation when the bucket is full and a warning light indicates visually that the bucket should be emptied. If necessary, a hose can be connected to the bucket itself if the water can be drained away directly. The hose must be laid in a downward direction as there is no pump integrated into the dryer.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be determined precisely using the hour counter that is integrated as standard. This is particularly useful for commercial applications. Thanks to the counter, it is also possible to determine whether the device was always in operation or whether it was switched off accidentally or intentionally.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection.   The natural refrigerant propane (R290) is an organic compound and is classified as a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Additional benefit for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.     Advantages at a glance   • Affordable price with strong performance in the commercial sector • Can also be used in cooler environments thanks to hot gas defrosting • Robust steel construction with large rollers and guide bar • Suitable for continuous operation • Can be transported and stored in any position thanks to the rotary piston compressor • External hygrostat connection     Technical data   dehumidification performance at 30 °C / 80 % RH 50 liters / day air volume 350 m³/h Maximum room size 125 m² (310 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C humidity range technically humidity range practice 35 - 90 % RH 40 - 90% RH (finned evaporator) voltage 220 - 240 V/50 Hz nominal current consumption max. 3.7 A power consumption max. 820W Recommended coverage 10 A cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5 liters operating noise 56 dB(A) at 1 m distance 53 dB(A) at 2.5 m distance Dimensions D x W x H 495 x 455 x 900 mm Weight 31 kg defrosting automatic hot gas automatic dehumidification Continuous operation, a plug-in mechanical hygrostat is available as an option. fan axial, 1-stage fan automatic shutdown when bucket is full Yes prefilter Yes operating hour meter Yes continuous operation possible Yes display no memory function yes (saves set values ​​automatically) hose connection yes, not included in delivery (suitable inner diameter: 12 mm) guarantee 2 years

Read more less

Handy floor fan made of robust metal and rotors (30 cm diameter) made of aluminum. The fan head can be swiveled vertically 100 ° so that the air flow can be tilted in any desired direction. The device has three speed settings, a practical carrying handle and a good price-performance ratio. Long service life thanks to the copper coil. Ideal for supporting water damage drying or for air circulation in any room. Due to its high reliability, the fan is also suitable for unattended continuous operation. Characteristics • Fan head with good air circulation • Three fan speeds, easily adjustable via push button on the back • Blowing direction of the fan is horizontally infinitely adjustable by 100° • Made entirely of robust metal • Rotor blades made of 100% aluminum • Powerful, durable high-performance motor with copper coil • Handy and easy to transport thanks to the carrying handle • Long power cable, approx. 1.50 m long • No assembly required, the fan is ready for use • RoHs and CE compliant • Matching wall/ceiling mount available as accessory   Technical data  power consumption max. 37 watts rotor diameter 30 cm airflow Up to 3019 m³/h noise 1 m distance: max. 58 dB(A) 2.5 m distance max. 55 dB(A) speed levels 3 Revolutions level 1 / 2 / 3: 950 / 1100 / 1250 per minute cable length approx. 1.50 m Connection EU plug with matching fixed adapter for Switzerland (230V) Dimensions (W x H x D) 395 x 375 x 185 mm Weight 2.8 kg Trotec article no. 1,510,006,011 guarantee 2 years

Read more less

High-quality floor fan made of robust metal and the rotors (45 cm diameter) made of aluminum. The fan head can be swiveled vertically so that the air flow can be tilted in any desired direction. The device has three speed settings, a practical carrying handle and a good price-performance ratio. Ideal for supporting water damage drying or for air circulation in any room. Due to its high reliability, the fan is also suitable for unattended continuous operation. Characteristics • Large fan head with good air circulation • Three fan speeds, easily adjustable via push button on the back • Blowing direction of the fan is horizontally infinitely adjustable by 110° • Made entirely of robust metal • Rotor blades made of 100% aluminum • Powerful, durable high-performance motor with copper coil • Handy and easy to transport thanks to the carrying handle • Long power cable, approx. 1.50 m long • No assembly required, the fan is ready for use • RoHs and CE compliant • Matching wall/ceiling mount available as accessory   Technical data  power consumption max. 100 watts rotor diameter 45 cm airflow Up to 5414 m³/h air speed max. 3.8 m/s noise (our measurement)     1 m distance level 1-3: 61-65 dB(A) 2.5 m distance level 1-3: 57-61 dB(A) speed levels 3 Revolutions level 1 / 2 / 3: 900 / 1150 / 1300 per minute cable length approx. 1.50 m Connection EU plug with matching fixed adapter for Switzerland (230V) Dimensions (W x H x D) 540 x 535 x 180 mm Weight 4.5 kg Trotec article no. 1,510,006,031 guarantee 2 years

Read more less

The TVM 20 D floor fan quickly provides plenty of cooling when running quietly and is also a great visual appeal. Due to its striking design, the device is also called a drum fan and the matt black look of the rotor basket and stand is reminiscent of countless professional appearances of wind machines of this type in front of and behind the cameras of large photo and film studios. Also ideal for ventilation, wind generation, wind cooling or drying - the TVM 20 D is very versatile.   Made of metal and with attention to detail   Made entirely of robust metal right down to the last chrome-plated blade tip and equipped with a copper coil in the motor, the floor fan is designed for a particularly long service life. With a high air flow rate and a blade diameter of 20 inches (around 50 cm), the device blows even the hottest accumulated air out of living or office spaces. With 120 watts, it also has enough power reserves to provide sufficient cooling even when temperatures escalate. With its three speed settings, the TVM 20 D is ideal for any ventilation scenario: the control element on the back of the metal mesh basket can be used to set a gently cooling airflow or a stiff wind. The rotor basket can be tilted 360° continuously around its horizontal axis, so that the airflow always arrives exactly where it is needed.   Safe stand with small footprint   As a professional, the TVM 20 D floor fan requires little space and is a welcome sight everywhere - for example at a photo shoot, in a restaurant or with the practical wall and ceiling hanging at a party or concert. The device can also handle the odd bump without a problem - because three non-slip rubber feet attached to the underside of the stand ensure that the device stands securely. The carrying handle attached to the back also makes the fan particularly easy to handle for transport to different locations.   Here are some practical advantages at a glance: 120 watts of power 3 speed levels Adjustable tilt angle of the fan head by 360° Front and rear protected metal grill fan blade diameter 50 cm Stable and non-slip base for tip-proof stand Long service life thanks to the copper coil in the motor Smooth running Practical carrying handle Unique price-performance ratio Optionally available: Wall and ceiling mount for ventilation of hard-to-reach places

Read more less

With the professional combination device, you can completely replace a comparable MultiQube tower with just one device when drying insulation layers. This with 20% more surface area, 50% lighter weight and 50% space saving! This also makes transport from the service vehicle to the damage site 100% faster. A multi-device installation with complex hoses is completely eliminated. Set up, connect, switch on - done!   No additional equipment technology is required because everything is already integrated and ready for connection: a powerful VX-5 turbine insulation layer dryer, a water separator, a 4-stage filter system and a powerful silencer - all ultra-compactly combined in a robust, stackable aluminum construction that offers you significantly more advantages than multi-device solutions and at the same time significantly lower costs.   Your employees will thank you too: 50% less carrying, lifting, dragging, stacking – 100% less piping, cabling, lashing – 20% less assembly.     Worldwide unique integral solution   • VX-5 turbine • Water separator WA 4i • HEPA filter module • Silencer NR 19 Everything is installed completely ready for connection – light, compact and powerful – in the world's only integral solution that is both economical and energetically convincing.     Advantages at a glance   • Replaces 4 devices: water separator, HEPA filter, silencer and all side channel compressors in the power classes from 0.4 kW to 3 kW • Up to 75% smaller than competitive designs • Up to 20% more area performance than a comparable MultiQube system • 50% less carrying, lifting, stacking • Faster and easier to install than any other system • Fully automatic, always the most effective drying performance thanks to HiDry automatic • Optiflow-NT multifunction display with plain text status display and performance control color lighting • Adaptronic power control for flexible vacuum surface drying from 10 m² to 85 m² • Digital counter for operating hours and energy consumption • DA-4 interface for real-time remote monitoring of system status and drying progress • Integrated thermal protection to prevent damage to drying equipment, inventory and building structure • Night operation whisper mode • Wear-free touch control panel • Additional HEPA filtration cost-effectively only when required • Total weight only 27 kg • High quality product, made in Germany     Small cause, big effect   Thanks to its ultra-compact design, this combination device enables you to achieve up to 100% more work productivity and up to 300% more storage productivity. All "practical time-wasters" can be eliminated in one fell swoop - so you benefit from extreme productivity increases in the day-to-day work of the repairer. Less equipment to be deployed and "moved" per damage, less storage required, more equipment per tour in the service vehicle, faster loading and unloading, faster transport from the vehicle to the damage site, faster installation, faster dismantling, less cleaning required.   The bottom line is that you can significantly increase your work and warehouse productivity.     touch control panel   Convenient operation at the touch of a finger. No controls, no wear and tear. A light press on the corresponding symbol is enough to configure the operation. In addition to the plus-minus buttons for quick power level selection, the control panel also includes functions for an extra whisper mode and a combined display of power consumption and operating hours.     Optiflow NT multifunction display   The current operating status and volume flow are easy to read on the display as a plain text display, even in the dark or from a distance. In addition, the color of the display lighting automatically shows how effectively the drying air can flow through the insulation layer in your installation. Green confirms optimal volume flow, orange indicates limit areas and a red LED indicates that the air flow is not sufficient for the area, so the setup needs to be optimized for quick drying.     night operation whisper mode   In whisper mode, the device works particularly quietly and yet efficiently. To reduce the noise level, the power is not simply reduced, but rather it is regulated with noise-optimized weighting to the optimum volume flow of power level 2. Once activated, the dryer operates in whisper mode for ten hours and then automatically switches back to the previously used power level. Extremely practical for customers who need a maximum of muted noise for a short time.     Sensor-supported thermal protection function   An integrated sensor monitors the internal air temperature. It automatically switches from the current level to level 1 before destructive climatic conditions above 45 °C are reached inside the device, which could lead to material stress and thus shorten the service life of the device.   The temperature continues to be monitored and if the temperature drops, the device automatically switches back to normal operation. However, if the temperature level remains critical for too long, the device will be switched off completely to protect itself.     TTKwic mode   The device has all the water separator features of the WA 4i, including two TTKwic quick couplings for easy drainage connection of dehumidifiers. To ensure that their condensate is reliably pumped out via the TTKwic quick couplings even when the device is switched off, you can switch the device to TTKwic mode via the control panel. The motor is off in this mode, but the pump is still active.     Turbo engine with adaptrically controlled power   The four-stage adjustable turbo motor reaches up to 20,000 rpm and guarantees maximum efficiency at every power level because the integrated HiDry automatic permanently records the current volume flow in m³/h and automatically regulates operation to the optimum air flow rate. A higher performance class or, if required, the extra whisper mode can also be selected at the touch of a button.     HiDry automatic   Fully automatic, always the most effective drying performance   Motor power generated in excess of requirements does not speed up drying, but increases wear and tear and power consumption. The key success factor for accelerated drying progress is not motor power, but a consistently high air flow in the insulation layer zones to be dried.   That's why the Qube+ is equipped with the innovative HiDry automatic control system, which adjusts the performance not depending on the resistance, but rather based on the volume flow, thus automatically guaranteeing the most effective performance at every stage for every drying setup.   Similar to a “cruise control” in a car, the sensor-supported HiDry automatic continuously and dynamically regulates the volume flow performance of the Qube+ to the preset optimum for the respective performance level. While at the beginning of the drying process, when resistance is still relatively high, more motor power is required to maintain the volume flow, the power requirement decreases continuously as the drying progresses. The HiDry automatic system ensures that the turbo motor of the Qube+ never generates more power than is necessary to maintain the optimum volume flow throughout the entire drying process. The result: the fastest possible drying with minimal energy consumption!     performance-optimized energy consumption   In contrast to conventional side channel compressor turbines, the performance and power consumption of the Qube+ turbo engine are always in a linear, direct relationship: If the power is reduced or the back pressure drops, the power consumption is also reduced. In addition, the power control is not resistance-oriented, but is geared towards the required volume flow.   Thanks to this technology, the Qube+ is extremely energy efficient compared to side channel compressors and, especially in the final drying phase, practically operates at the energy-saving eco tariff.   Always as much power as you need:   Power level 1: Ideal for economical drying of small areas. At this level, the Qube+ performs as well as a 0.4 kW side channel blower, but uses 70% less electricity! Performance level 2: Corresponds to the performance of a 0.8 kW side channel blower. Performance level 3: The Qube+ is approx. 10% more powerful than a side channel blower with 1.1 to 1.3 kW output. Performance level 4: Corresponds to 160% of the output of a 1.1 kW to 1.3 kW side channel blower and 95% of the output of a 3 kW side channel blower.   Stackable construction with telescopic push handle   The height-adjustable telescopic push handle can be extended and retracted at the push of a button. This allows the handle height to be adjusted to suit the user and retracted for space-saving storage. The motor cover is also equipped with a carrying handle and a practical cable holder. In addition, two stacking recesses ensure that stacked devices remain stable during transport or in storage.     Service-friendly design The Qube+ has an integrated service socket to which a condenser dryer or a drying control unit can be connected conveniently and quickly. The Qube+ also has a 50 mm threaded connection for process air extraction. This effectively reduces the critical heating of the room temperature to maintain the value of your drying equipment.     Flexible filter system For all applications that require HEPA filtration, the receiving sleeve of the G4 filter sleeve can be easily and quickly replaced with the HEPA filter module with combined F8 pre-filter sleeve. Whether changing the filter or cleaning, the maintenance-friendly design of the Qube+ allows you to work quickly and safely. The turbo motor, power connection and essential electrical components are completely housed in the motor cover, which can be removed in an instant thanks to the quick-release technology.   After removing the lid, the lower part of the Qube+ is completely power-free because there are no cable connections from the motor lid. This means you can start cleaning straight away without any additional safety measures.     DA-4 interface   The Qube+ comes standard with an interface for data exchange with our drying control unit DA 4 Qube. The connection of both units enables networking of all device data including real-time remote monitoring of system status and drying progress.     Accessories and consumables included in delivery   • Water separator bottom filter mat, 1 piece • G4 filter sleeve, 1 piece • F7-Z-Line filter for filtering the intake engine cooling air, 1 piece • 50 mm hose connection for process air discharge, 1 piece • Water drainage hose, length 5m, Ø 12mm     Our accessory tip: All-weather soundproof hood (Trotec SKU no.: 6100000070)   • Noise reduction of up to 5 dB(A) and additional modulation of high frequencies into quieter bass ranges • Easily washable and waterproof material • Ideal for continuous operation in residential environments • Ideal for outdoor installation, for example for flat roof drying • Quick to install and access thanks to double zipper system • Air inlets and outlets ensure optimum engine cooling free from heat pressure • Also for use with the Qube+ with attached drying control unit DA 4 Qube   (Made to order - the delivery time for this hoe is usually 7-10 working days)           information video application Qube+ Information video cleaning Qube+     Technical data   In negative pressure suitable for areas up to  Level 1: 25 m² Level 2: 50 m² Level 3: 85 m² Max. negative pressure 220 mbar air volume free blowing max. 250 m³/h HiDry volume flow rate (intake)   Whisper mode level 90 m³ / hour Level 1 90 m³ / hour Level 2 140 m³ / hour Level 3 160 m³ / hour Boost mode level 180 m³ / hour engine power 0.2 - 1.2 kW noise level at a distance of 3 m 48 - 62 dB(A) voltage 220 - 240 V/50 Hz nominal current consumption max. 6.7 A Recommended coverage 16 A cable + plug 3.5 m + EU plug with Swiss fixed adapter T12 Bucket 10 liters Dimensions H x W x D 735 x 500 x 490 mm Weight 25.2 kg hose connections for insulation drying 3 x Ø 38 mm TTKwic dehumidifier quick couplings 2 connection for process air extraction 50 mm service socket 1 x EU socket (Swiss plugs only fit 2-pin) electricity consumption meter yes, digital operating hour meter Yes control and monitoring DA-4 interface EfiDry humidity sensor connection overflow sensor with automatic shutdown Trotec article no. 1,560,000,055 guarantee 2 years

Read more less

This separator belongs to the Trotec "Multiqube" drying system family. It can be integrated into this system, but can also be freely combined with existing devices from other manufacturers via hose connections. Compared to other brands, the price-performance ratio of this model is excellent.     microfilter system   It has an integrated microfilter system with a maintenance-friendly magnetic closure filter compartment. This makes it a flexible, integrated solution with all pre-HEPA filter levels in just one device.   Advantage: improved flow-optimized filter technology, faster assembly, less material and space required - no separate additional microfilter housing necessary.     Use in combination with a compressor   The automatic on/off switch of the connected compressor provides optimal overflow protection that does not require monitoring. When drying the insulation layer, it is possible to process areas of up to 40 m² without any problems.     Extended application possibilities   The "TTKwic" quick couplings attached to the device allow the connection of up to two dehumidifiers with condensate pumps, which pump the extracted water into the separator. This creates a central water drain (hose connection Ø 12mm).     Advantages at a glance   • Approx. 25% improved filter performance thanks to filter compartment with microfilter cassette • Stainless steel element for water separation and fine filtration • Residual water emptying function • Active overflow protection through automatic switching on and off of the connected insulation layer dryer • Integrated connection cable • Cable collector • Extremely lightweight, robust and particularly maintenance-friendly construction • Transport rollers with parking brakes • Maintenance quick-release fasteners • Emergency stop switch • Overflow sensor with automatic shutdown • Stackable to save space • Lightweight material base: impact-resistant and robust construction, 100% recyclable • Two integrated TTKwic quick couplings for central water drainage for up to two connected dehumidifiers • Uncomplicated handling - easy to clean   scope of delivery   MultiQube, a microfilter cassette     Technical data  volume 17 liters power connection 230 V / 50 Hz Plug EU plug with Swiss fixed adapter power consumption 320 W number of air connections 3 suitable hose diameter 38 mm fine filter 3 pieces class F8 Weight 11.3 kg dimensions (W x H x D) 440 x 395 x 420 mm Trotec article no. 6,100,000,006 guarantee 2 years

Read more less

Modern insulation dryers are soundproofed as best as possible, but due to their function they cause turbine-like noises, which are often perceived as annoying by residents. This damper can be easily integrated into the drying system and significantly reduces the operating noise.   Extensive practical tests have shown significant noise reductions when used with insulation drying units from leading manufacturers. This universally applicable module is particularly suitable for use with Trotec insulation drying units and offers even more noise reduction without dynamic pressure.   More No power connection required. The filter is integrated into the air flow of the rest of the drying system.    Advantages at a glance   • Noise reduction between 14 and 19 dB(A) possible • No loss of power and no back pressure • Compatible with many common insulation drying units • Universally applicable for 38 mm and 50 mm hoses • For compressor operation in negative and positive pressure mode • Specially designed for flexible and stable stacking installation “from a single source” with MultiQube system components • 100% recyclable     Technical data   sound reduction 14 - 19 dB(A) air hose connections 2 nozzles of 38 mm each (optional rubber adapter available to 50 mm) Dimensions (L x W x H) 378 x 378 x 132 mm Weight 3.4 kg Trotec article no. 6,100,000,120 guarantee 2 years

Read more less

When drying insulation layers using negative pressure, the use of a class H13 particulate filter is highly recommended to protect against mineral fibre dust, mould and allergens in the air.   This two-part Multiqube filter consists of a robust, maintenance-friendly plastic housing and the filter element, which must be replaced after appropriate use. It was specially developed for use with Trotec water separators and compressors and is characterized by optimal filter performance and a high degree of separation. The filter class H13 according to DIN EN 1822-1 corresponds to a separation efficiency of nominally > 99.97% at 0.3 micrometer particle size. With 3 m² filter area and 315 m³/h nominal air throughput, the filter elements are optimally matched to the technical specifications of the vacuum turbines of Trotec compressors and offer performance reserves for combined use with up to two VE4S MultiQube or one VX5.     Optional filter class H14   For an even higher purity rate, a class H14 filter is optionally available (item no. 7.160.000.223) with a separation efficiency of > 99.995% at 0.2 micrometer particle size.     Hepacontrol   Contaminated filters not only pose a risk of contamination of the ambient air, they also have longer drying times and overheating of the compressor turbine. Compared to passive systems, this offers even more safety thanks to its innovative "Hepacontrol" status display. Active contamination protection: If the filter performance is too low due to a worn filter element, the warning light switches on automatically and clearly signals that the filter element needs to be replaced. Hepacontrol does not require an additional power connection, as the bright warning LED is powered by an integrated and particularly long-lasting high-performance battery.     More   No power connection required. The filter is integrated into the air flow of the rest of the drying system.     scope of delivery   complete with housing and a filter element     Technical data filter class H13 according to ISO 14644-1 air flow max. 315 m³/h number of hose connectors 4 x 38 mm (rubber adapter to 50 mm optionally available) Dimensions W x H x D 435 x 255 x 435 mm Weight 6.3 kg Trotec article no. 6,100,000,043 guarantee 2 years

Read more less

The three-stage adjustable turbo motor reaches up to 20,000 rpm and guarantees maximum efficiency at every power level because, thanks to the integrated automatic system, the current volume flow in m³ is constantly recorded and the power is automatically regulated to the optimum air throughput.   Just press a button and the device switches to a higher performance class or, if required, to the additionally available whisper mode:     performance levels   Performance level 1: suitable for areas up to approx. 30 m² at overpressure / 25 m² at negative pressure, motor power: 0.5 kW Performance level 2: suitable for areas up to approx. 60 m² at overpressure / 50 m² at negative pressure, motor power: 0.8 kW Performance level 3: suitable for areas up to approx. 90 m² at overpressure / 70 m² at negative pressure, motor power: 1.2 kW   Comparison with previous models based on side channel compressor technology: Power level 1: Corresponds to the power of a 0.8 kW side channel compressor Power level 2: approx. 10% more powerful than a side channel compressor with 1.1 to 1.3 kW power Performance level 3: Corresponds to 140% of the performance of a 1.1 kW to 1.3 kW side channel compressor and 80% of the performance of a 3 kW side channel compressor The wear-free touch control panel of this new insulation layer dryer allows convenient operation at the touch of a finger. No controls, no wear.   The new whisper mode reduces the noise level of the unit for 10 hours, but the device still works as efficiently as usual. In addition, it has an interface for data exchange with the latest generation of our drying unit DA 4 M. The connection of both units enables networking of all device data including real-time remote monitoring of system status and drying progress. Not only are the current operating status and volume flow clearly visible on the multifunction display - even in the dark or from a distance - the color of the display lighting also automatically shows how effectively the drying air can flow through the insulation layer in your installation.     Performance-optimized energy consumption through HiDry automatic   In contrast to conventional compressor turbines, the power and power consumption of VX turbo engines are always linearly correlated. If the power is reduced, the power consumption is also reduced. In addition, the power control is not resistance-oriented, but is geared to the required volume flow. Thanks to this technology, VX units operate at an energy-saving eco rate compared to turbine compressors, especially in the final drying phase.     Advantages at a glance   • Unique adaptronic power control - virtually eliminates the need for thinking in device classes • Replaces all side channel compressors in the power classes from 0.8 kW to 3 kW • Super light - only 10 kg • 35% lighter than comparable competitor models • Up to 75% lighter than side channel blowers of the same performance class • DA-4 interface for networking all device data including real-time remote monitoring of system status and drying progress • Optiflow-NT multifunction display with plain text status display and performance control color lighting • Digital counter for operating hours and energy consumption • Whisper mode for very quiet night operation • Wear-free touch control panel • HotStop system • Service socket for dehumidifier (EU socket!) • Cable holder with lockable plug • Plain text status display • Protective recessed controls • Maintenance quick-release fasteners       scope of delivery   device with • 2x connection pieces for 38 mm hoses • Filter sieve for drying using the overpressure process • 2x VX microfilter element fine dust filter class F8     Important   • The four-way distributor shown in the product image is not included in the scope of delivery • The blue socket on the device corresponds to an EU socket. Only 2-pin plugs are suitable for Swiss devices     Technical data   Recommended room size overpressure 90 m² negative pressure 70 m² max. overpressure 270 mbar max. negative pressure 220 mbar air volume free blowing 250 m³/h Defined volume flow optimum (aspirating)       Whisper mode level: 100 m³/h Level 1: 100 m³/h Level 2: 150 m³/h Level 3: 180 m³/h Level 4: 250 m³/h power connection 230 V / 50 Hz nominal current consumption max. 5.5 A power consumption max. 1200W cable length approx. 3.5 m Plug EU plug with Swiss adapter Dimensions W x H x D 430 x 415 x 420 mm Weight 10 kg Trotec article no. 1,560,000,042 guarantee 2 years

Read more less

High-quality, large basket fan made of robust metal and aluminum rotors. The fan head can be swiveled so that the air flow can be tilted in any desired direction. The device has three speed settings, a long-lasting high-performance motor and a rack with 2 wheels for easy mobility. It impresses with its good price-performance ratio and its easy handling. Ideal for supporting water damage drying or for air circulation in any room. Due to its high reliability, the fan is also suitable for unattended continuous operation. Characteristics • Extra large fan head (Ø 60cm = 24“) with up to 10500 m³/h air circulation • Three fan speeds, easily adjustable via rotary switch on the back • Blowing direction of the fan is horizontally infinitely adjustable • Made entirely of robust metal • Rotor blades made of 100% aluminum • Powerful, durable high-performance motor with copper coil • Handy and easy to transport with rack and 2 wheels • Long power cable, approx. 2.20m length, Swiss plug • RoHs and CE compliant  Technical data  power consumption 120 watts max. rotor diameter 60 cm / 24 inches airflow Up to 10500m³/h speed levels Three cable length approx. 2.20m Connection Swiss plug 230V 3-pin (normal household socket) Dimensions (W x H x D) 80 x 71 x 38.5 cm operating noise 64 dB(A) at 2.5m distance Weight 6.5kg  

Read more less