Hard worker among construction dryers! Whether drying out after water damage, drying new buildings or keeping heated and unheated storage rooms dry - the 650S is a universally applicable dehumidifier with high-quality workmanship and reliable operation. It is manufactured in a specialized factory in Europe. It is built to last, easy to care for, rarely needs maintenance and is very affordable considering its power and quality .
Easy operation
The desired target humidity can be continuously regulated between 32 - 100% using a mechanical hygrostat; continuous operation is also possible. The high air circulation volume of an impressive 925 cubic meters per hour is particularly useful in larger zones. With its stable carriage construction and large wheels, frequent changes of location can be carried out very easily.
Direct hose connection and optional pump kit
Due to its very high dehumidification capacity, this dehumidifier has a direct connection for condensate drainage instead of a water tank. The hose must have a gradient towards the drain. If this is not possible, a suitable pump kit is optionally available, with which the water can be pumped up and away.
The operating switch is protected against dust and splash water by a protective cap and a slotted hygrostat rotary switch protects against accidental adjustment of the switch position.
Professional hot gas defrosting
Inside, a professional hot gas automatic defrosting system ensures effective dehumidification results. The finned evaporators are particularly effective in temperatures above 10°C and in humidity levels above 40%. Technically, the dryer can be used at room temperatures down to around 5°C, even in unattended continuous operation.
Optional counters
The delivery does not include an hour or consumption meter. You can order these from us if you wish (the housing is prepared for retrofitting as standard). You can choose between a pure hour meter or the combined dual meter, which measures hours and power consumption. The meters are MID-compliant. Outside Switzerland, dryers used professionally must already be MID-compliant.
Hydrofluoroolefin (R-454C) as an environmentally friendly refrigerant
Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection.
The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and is classified as a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).
Advantages at a glance
• High dehumidification performance even at low temperatures
• Robust plastic-coated metal housing
• Can be transported and stored in any position thanks to the rotary piston compressor
• Stable carriage construction
• Automatic hygrostat-controlled dehumidification operation
• Quality hot gas automatic defrosting
• Possibility of retrofitting MID-compliant dual meters for operating hours and kilowatt hours (optional)
• Possibility to add a suitable pump kit, which can be connected directly to the device (optional)
