These infrared panels are ideal for providing previously unheated rooms with an effective heat source or for generating heat in specific areas, such as at the workplace, on the sofa or in the bathroom. The gentle heat waves are absorbed by solid materials such as furniture or walls, but also by people, and provide a pleasant warmth. Very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors.
While traditional heaters have to heat the entire room, heating panels can be used to specifically heat desired areas. This saves a lot of energy and therefore costs.
application examples
Heating of living spaces: Whether living area, conservatory or bathroom, as a local additional heating system, the infrared flat heater creates heat directly where the residents need it. It can be mounted on the wall to save space and only needs a standard socket for heating operation.
Use in the catering industry: As a freestanding or wall-mounted device, the heating plate is the optimal solution for the targeted heating of sales stands or terrace areas and is much more effective than conventional gas heaters.
Faster drying of wall surfaces: When drying out or renovating buildings, infrared heating of suitable wall building materials causes capillary moisture transport towards the heated wall surface due to the temperature gradient, which, in contrast to diffusion, can transport significantly more moisture out of the wall in a shorter time. In plain English: drying is faster when the damp wall is illuminated with infrared waves.
Workplace heating: With the optionally available feet, the heater can be placed vertically or horizontally anywhere for targeted heating. Ideal for cool workplaces, for example in the warehouse, behind refrigerated counters, in workshops or in large halls
Advantages at a glance
• Efficient heating process with environmentally friendly IR-C radiation
• Heat transport via light waves - direct object heating without convective loss
• Maximum efficiency: 100% of the electrical energy used is converted into heat output
• Clean heat - no noise, no smell
• no condensate, no oxygen consumption, no unpleasant dust turbulence
• Integrated hanging device for mounting on wall or mounting supports
• Can also be used as a stand-alone device (suitable stands are available from us as accessories)
• Ready to use - no additional installations or expensive modifications required
The ErP table for this heater can be found above in the "Documents" section.
Please note: The device is only suitable for use in well-insulated rooms or for occasional use.
|
Calculation of power requirements for rooms up to 2.5 m ceiling height
|
insulation quality of the rooms
|
|
good to very good
|
medium
|
uninsulated/old building
|
|
1 exterior wall
|
50 W/m²
|
70 W/m²
|
90 W/m²
|
|
each additional exterior wall
|
+10 W/m²
|
+10 W/m²
|
+10 W/m²
|
The required infrared heating power is calculated as follows:
Area of the room in m² x W/m² = required heating output in watts.
Calculation example: For a room size of 10 m² with very good insulation quality and two external walls (50 + 10 W/m²), the recommended power requirement is 10 m² x 60W/m² = 600 W.
|
Technical data
| heating output |
580W
|
| heating type |
infrared heat waves
|
| Suitable room temperature
|
0 - 60 °C
|
| heating surface
|
0.54 m²
|
| heating levels
|
1
|
| voltage
|
220 - 240 V/50 Hz
|
| nominal current consumption
|
max. 2.6 A
|
| power consumption
|
max. 0.58 kW
|
| housing
|
aluminum
|
| cable length
|
approx. 1.9 m
|
| Plug
|
EU plug with Swiss adapter |
| Dimensions W x H x D
|
905 x 605 x 22 mm (without feet)
|
| Weight
|
5 kg
|
| protection class
|
IP54
|
| overheating protection
|
Yes
|
| Trotec article no.
|
1,410,003,012
|
| guarantee
|
2 years |
