This easy-to-use hand-held measuring device is part of the basic equipment of every DIY enthusiast and craftsman. This practical quick measuring device reliably detects voltage sources from just 5 volts up to 1000 volts or from 50 Hz to 400 Hz.   The sensitivity can be continuously adjusted using the rotary control on the side of the voltage detector. This allows you to finely pre-adjust the measuring range to the expected voltage. It is ideal if, for example, you want to find a broken cable or to determine the presence of alternating voltage in fuses, open wires, cable reels, junction boxes, sockets, switches and hidden wall cables.     Fast and reliable voltage testing – even in dark places   Due to the capacitive measuring method, it is enough to bring the voltage detector close to the conductor - the detector warns you quickly and without contact using a red flashing LED in the entire detector tip. An acoustic warning signal also sounds.   The compact pen-shaped voltage detector is equipped with a switchable LED light integrated in the measuring head, which enables you to work safely and accurately even in poor lighting conditions.   Whether attached with a clip in your shirt, jacket or trouser pocket – with the handy detector you always have a reliable testing device for quick voltage detection at hand.     Advantages at a glance   • Fast and contactless detection of alternating voltage • Voltage range 5 V – 1000 V AC / 50 Hz – 400 Hz • Protection class CAT IV 1000 V • Optical and acoustic alarm when voltage is applied • Continuous adjustment of the measuring sensitivity • Compact pen-shaped design with pocket clip • Integrated LED light for working even under unfavorable lighting conditions • Optimal price-performance ratio     scope of delivery   • Measuring device • Batteries • Operating instructions     Technical data   measuring circuit category CAT IV (1000V) measuring range V/AC 5 a 1000 V Vicinity pollution level 2 protection class IP20 voltage display LED functions       • contactless detection of alternating voltage (without galvanic contact) • acoustic alarm • optical alarm • integrated light display humidity range max. 85% RH temperature range 0 °C to 40 °C Security   EN 61610-1:2010, EN 61610-2-033:2012 EN 61326-1:2013, EN 61326-2-2:2013 battery type 2 x 1.5 V, AAA Dimensions (L x W x H) 154 x 32 x 28 mm Weight 50 g Trotec article no. 3,510,205,217 guarantee 2 years

Read more less

Swiss version, suitable for three-pin 230V household sockets.     Quick and easy measurement of energy consumption   Which electrical appliance in the office or household consumes how much energy? With a minimum possible power display of 0.1 W, this measuring device can detect even the smallest energy wasters. This also makes it possible to detect standby consumption in devices, i.e. any consumption when the device is switched off.   The application is extremely simple: plug the measuring device into the socket and connect the power consumer to be checked. You can immediately see its current energy consumption, either as active power in watts, kWh, price or cost per kWh.   Use this measuring device to test your electrical devices, such as TV and HiFi systems, LCD TVs, amplifiers, DVD players, video recorders, computers, servers, refrigerators, freezers, washing machines, dryers, air conditioners, heaters, ceiling floodlights, floor lamps, background and shop window lighting, machines, and much more.     Advantages at a glance   • Quick and easy measurement of energy requirements • Power consumption display in watts, kWh or costs • Optimal price-performance ratio • Minimum possible current display 0.1 W • Buffer capacitor for storing the selected settings • Display of standby consumption from 0.1 W - this is not possible with many competing products • Display of the current power consumption of one or more devices • Display of the costs of energy consumed within a certain period of time (electricity price must be recorded once) • Connection of a multiple socket with several devices possible • Easy-to-read and easy-to-understand LCD display • Power failure protected • Swiss version - no conversion or adapter required     Technical data   measuring range total electricity consumption current consumption 0.1 - 9999 kWh 0.1 - 2300 Watt (max. 10A) accuracy ± 2% voltage / frequency 230V / 50-60 Hz (= household socket) Advertisement LCD memory yes, recording capacity 9999.9 hours measuring circuit category CAT II (2500V) Conformity / Safety EN 61010-1, EN 61326-1, pollution degree 2 protection class IP20 ambient temperature 5 - 40 °C ambient humidity max. 85% RH Dimensions (H x W x D) 95 x 51 x 70 mm Weight 100 g Trotec article no. 3510205916 guarantee 2 years

Read more less

Moisture indicator BM20 for measuring moisture in wood and soft materials   The BM20 moisture indicator from the MultiMeasure Basic series is a semi-professional measuring device for quickly determining the moisture content of building materials or wood using the resistance method.   The easily replaceable steel measuring pins enable a solid connection with the test material and ensure reliable measurement results when measuring the moisture content of sawn wood and firewood.   A bar scale and the additional direct value display of the moisture volume in absolute percentages make it easier to read the moisture values; two different scale ranges for wood and building materials increase the accuracy.   For wood moisture measurement, a calibration curve is stored in the device, which corresponds to the average of the wood types relevant in Europe based on a wood temperature of 20 °C. Therefore, no further settings are necessary for a quick indication of the wood moisture content.   Switching from wood moisture mode to building moisture mode and back is done using a convenient mode selector slider. A reference adapter is integrated into the protective cap of the device to check the battery status and function.   Technical data: Measuring principle: resistance method Electrode length: approx. 8 mm Measuring range wood moisture: 1 - 45 % Accuracy of wood moisture: approx. ± 1 % Measuring range building moisture: approx. 0.2 - 2.4% Accuracy of building moisture: approx. ± 0.05 % Permissible ambient conditions: 0 - 40 °C / 0 - 85 % rH Power supply: 3 x Cr 2032 Dimensions L x W x H (in mm): 139 x 47 x 25 Weight: 100 g warranty 2 years

Read more less

The steel measuring pins enable a solid connection with the test material and ensure reliable measurement results when measuring the moisture content of sawn and firewood or when determining the moisture content of soft building materials such as gypsum or plaster.   A bar scale and the additional direct display of the moisture volume in absolute percentages make it easier to read the moisture measurements; two different scale ranges for wood and building materials increase accuracy.   For wood moisture measurement, a calibration curve is stored in the device, which corresponds to the average of the wood types relevant in Europe based on a wood temperature of 20 °C. Therefore, no further settings are necessary for a quick indication of the wood moisture content.   It is not necessary to switch from wood moisture mode to building moisture mode, as the measured value is displayed using two parallel scale ranges for the respective material. A reference adapter is also integrated into the protective cap of the device to check the battery status and function. The measuring pins can be easily unscrewed and replaced if necessary.     Advantages for the practice • Wood moisture and material moisture measurement with one device • Double scale for wood moisture and material moisture • Includes protective cap with integrated test function • Ready to use • Display of the ambient temperature optionally in °C and °F • Calibration curves for common types of wood • With LED humidity indicator • Integrated LED flashlight • Easily replaceable steel measuring pins • Direct measurement value display in % • Automatic function and battery test • Practical pocket clip • Auto shutdown • Practice-optimized German industrial design - protected design     scope of delivery measuring device, operating instructions     Technical data   Measuring principle: resistance method Electrode length: approx. 8 mm Electrodes: integrated, replaceable Permissible ambient conditions: 0 to +40 °C / 0 to 85 % RH Power supply: 4 x 1.5 V AAA Dimensions (L x W x H): 155 x 34 x 52 mm Weight: 135 g   wood moisture Measuring range: 6 to 44% Accuracy: < 30 % approx. ± 2 % / ? 30 % approx. ± 4 %   building moisture Measuring range: approx. 0.2 to 2.0% Accuracy: < 1.4 % approx. ± 0.1 % / ? 1.4 % approx. ± 0.2 %   temperature Measuring range: 0 to 40 °C / 32 - 104 °F Accuracy: not specified   Trotec article no. 3510205025

Read more less

This practical mini laser has everything a rangefinder needs. This includes precise laser measurement of distances, areas and volumes. Surprisingly diverse features with helpful functions and simple and intuitive operation. It is very small and light and fits in any pocket.     Excellent price-performance ratio   Despite its very low price, the measuring device impresses with its quality and functionality. Distances of up to 30 meters, areas and volumes are measured quickly but also precisely. The deviation is a maximum of 3 millimeters.   The device also scores points with the 'single' and 'double' Pythagoras: Both are indispensable functions that allow, for example, the indirect calculation of distance or height in addition to checking a right angle. The handheld laser meter also has other useful functions such as a continuous measurement mode, the addition and subtraction of measurement results and the automatic storage of the last 10 measurements.     Well-thought-out equipment   Both the simple operating instructions and the practice-optimized features of the handheld laser meter make this small measuring device very useful. • Automatic switch-off for the laser after 30 seconds • Automatic switch-off for the entire measuring instrument after 3 minutes • Encased in a robust, dust and splash-proof housing • Protection class IP54   The integrated lithium-ion battery can be charged quickly and easily using the micro USB cable included in delivery.     Advantages at a glance   • 0.05 m to 30 m range • Indirect distance and height or partial height calculation (3-point Pythagoras functions) • Precise, instantaneous measurement of distances, areas and volumes • Backlit multi-line display • Continuous measurement mode with min/max function • Addition and subtraction of measurement results • Automatic storage of the last 10 measured values • Robust workmanship – dust and splash-proof (IP54) • Measure from the front and rear edges • Battery status indicator • Automatic shutdown • Hand strap • 3.7 V (200 mAh) lithium-ion battery, rechargeable via micro USB cable     scope of delivery   • Measuring device • Li-Ion battery (integrated) • Hand strap • Micro-USB cable • Operating instructions     Technical data   measuring range distance resolution accuracy 0.05 - 30 m (= 0.17 - 98 ft) 1 mm ±3mm laser point at a distance of 10 m at a distance of 20 m at a distance of 30 m 10 mm 12 mm 20 mm laser class 2 laser power < 1 mW (620 - 690 nm) memory Retrieve last 10 measurements energy supply Li-Ion battery 3.7 V (integrated) 200mAh, 2000 measurements per battery charge protection class IP54 Dimensions (H x W x D) 75 x 34 x 15 mm Weight 24 g Ambient temperature operation / storage 0 - 40 °C / -20 - 70 °C Trotec article no. 3,510,205,153 guarantee 2 years

Read more less

A handy, inexpensive device for quick and reliable measurements of a wide range of noise sources within a measuring range of 40 to 130 dB(A). Minimum and maximum values ​​can also be displayed.   For use in windy outdoor environments, an attachable windshield is also included in the scope of delivery, which suppresses annoying wind noise. This means that the measured values ​​are not affected.   An integrated sensor constantly monitors the ambient light and automatically switches on the display lighting in poor lighting conditions.     Diverse application possibilities   Thanks to the successful combination of innovative features, ergonomic design and affordable price, this precision instrument is suitable for a wide range of applications. For example, for measuring noise and sound in the office, during leisure time, during machine inspections, in private living environments, on construction sites, traffic noise, maintaining the volume of music and much more.   It can also be used for quality control in the construction industry, for example to detect sources of noise or weak insulation. The disturbing noises are often transmitted through the ventilation system or other supply shafts.     Advantages at a glance • Measures sound quickly and reliably • Optimal price-performance ratio • Minimum value, maximum value and hold function • Sensor-controlled display lighting in poor lighting conditions • Simple one-handed operation • Very short response time • Tripod thread • Practice-optimized German industrial design - protected design     scope of delivery   • Measuring device • Battery • Wind protection • Operating instructions     Technical data   sensor technology sound dB(A) sound measuring range 40 - 130 dB(A) accuracy ±3.5 dB(A) (at 1 kHz and 94 dB(A)) resolution 0.1 dB(A) response time 0.125 seconds frequency range 31.5 Hz - 8 kHz power supply 9V block battery operating time > 30 hours Weight 135 g Dimensions (H x W x D) 132 x 56 x 33 mm Vicinity: temperature humidity 0 - 40 °C 10 - 75 % RH (non-condensing) Trotec article no. 3,510,205,051 guarantee 2 years

Read more less

Accurate light measurement at an affordable price: This compact mini lux meter enables precise light intensity measurements indoors and outdoors.   The detector meets the requirements of the ISO-recognized international lighting commissions (CIE) - the integrated spectral filter reliably filters out infrared components so that only the relevant light spectrum is recorded.   The successful combination of reliable measuring technology, ergonomic design and unbeatable price-performance ratio makes this device a universal light meter for a wide range of applications.     application examples   • Light intensity measurement at work or at home • as an aid in window display design, in trade fair construction or for optimal film and photo set lighting • Light incidence measurements for plantings in green spaces, conservatories or your own garden • As a useful planning tool for architects or for performance control of indoor and outdoor lighting systems     Advantages at a glance   • Measurement of illuminance and light incidence • Switching function lx/fc • Optimal price-performance ratio • Large, easy-to-read measurement display • Maximum value function • Simple one-handed operation • Sensor-controlled display lighting in poor lighting conditions • Automatic shutdown • Tripod thread 1/4-inch     scope of delivery   • Measuring device • Battery • Operating instructions     Technical data   measuring range 0 lx to 40,000 lx (0 fc to 3716 fc) accuracy   ±5% ±10 lx/fc (< 10000 lx / 1000 fc) ±10% ±10 lx/fc (> 10000 lx / 1000 fc) resolution 0.1 lx / 0.01 fc measurement rate 2.5 times per second, nominal display LCD, monochrome ambient temperature   Operation 0° to +40 °C Storage -10° to +60 °C ambient humidity max. 80% RH (non-condensing) Dimensions (L x W x H) 157 x 34 x 56 mm Weight 138 g Trotec article no. 3,510,205,081 guarantee 2 years

Read more less

With a power consumption of 2000 watts and flexible adjustment of hot air temperature and blower power, this hot air blower enables you to use it for a wide range of applications, from soldering, welding and tinning work to adhesive curing and paint removal, as well as film shrinking and paint drying.     Versatile configurable for a wide range of applications   To ensure that the heat is always controlled during use, the device has many convenient setting options. The hot air temperature can be preselected at the touch of a button between 50 °C and 650 °C in 10-degree increments. The air volume can also be regulated in 5 stages between 250 and 500 liters per minute. In this way, you can optimally configure the "Hystream" for every application.   The color LCD on the back is particularly practical. Not only does the display give you a clear overview of the current working values ​​for temperature and air volume, a color change also informs you when the preselected temperature value has been reached. Green signals the heating phase, red confirms that the target temperature has been reached - it's that simple.   It is just as easy to handle: the low weight of just 800 g makes it particularly pleasant to use for longer periods of time, and the ergonomic design of this hot air tool ensures comfortable working and a secure grip thanks to the pistol grip with soft grip and protective guard.     Practical functions for more comfort and safety   The hot air blower is electronically controlled and thus ensures a constant working temperature even in continuous operation - a must for particularly precise soldering and welding work. In addition, an overheating protection is integrated, which automatically switches off the heating element in the event of an overload, while the blower remains in operation.   In addition to the 60 hot air settings for high temperatures up to 650 °C, the "Hystream" also has a cold setting of 50 °C for rapid cooling of the material to be processed or for changing the attachment nozzle.   The cold setting also allows the heating coil to be cooled down quickly and in a particularly gentle manner before the device is put away again after use.   Thanks to the specially balanced weight distribution, this thermal tool can also be used without any problems in a stationary, tilt-proof position for hands-free work.   This means you can hold the workpiece with both hands, which is particularly practical when bending pipes. But the stand-alone operation is also an advantageous solution for longer soldering work and many other stationary applications.     All-rounder at professional level – special applications included   The nozzle set included in the standard delivery makes this hot air blower the optimal thermal tool for practically every task:   • A deflection nozzle protects heat-sensitive substrate materials from overheating by deflecting the heat beam. Ideal for removing old paint and putty from window frames or for restoration work.   • With the grill lighter nozzle, the charcoal is glowing and ready for grilling in just a few minutes.   • The reducing nozzle focuses the heat beam for more precise work, for example for removing paint in corners or for welding.   • And a wide-jet nozzle ensures a constant, even distribution of air, ideal for removing old paint over large areas or for evenly drying filler work.   When not in use, the hanging loop integrated in the cable offers you a helpful hanging option for quick access.     Advantages at a glance   • 2000 watt hot air blower • Ergonomic pistol design with soft grip and protective guard • Large, easy-to-read LCD display of the selected performance values • Display color changes when the desired temperature is reached • Air volume adjustable in 5 stages between 250 and 500 liters per minute • Temperature control from 50 °C to 650 °C in 10-degree increments • Safe operation through overheating protection • Hanging loop on the cable for storage • Thanks to balanced weight distribution, it is tilt-proof when standing and can be used for hands-free work • Nozzle set for many special applications already included in delivery • Cold setting for rapid temperature reduction • Fatigue-free working thanks to the low weight     Technical data   power connection 230V / 50 Hz cable / connector approx. 2 m, EU plug with Swiss fixed adapter air volume flow 250 - 500 liters/hour fan speeds 5 outlet temperature max. 650 °C Weight 800 g dimensions (W x H x D) 270 x 210 x 60 mm temperature regulation in 10 °C increments Trotec article no. 4,435,000,020 guarantee 2 years

Read more less

Immediately after switching on, the battery-operated laser, which can therefore be used conveniently anywhere, projects a right-angled cross or, optionally, a single horizontal or vertical line onto the opposite object surface. And because the device is self-leveling, the projected lines in this mode are always 100% horizontal/vertical.   The leveling mode automatically compensates for unevenness in the surface up to a 4° inclination. If self-leveling is not possible due to larger unevenness, the laser warns with a red flashing LED on the device and a pulsating laser cross on the projection surface. Where previously you had to laboriously use a spirit level and pencil, modern laser technology now helps.   Despite the latest technology, it is so easy to use that not only experienced craftsmen can benefit from its practical advantages, but also DIY enthusiasts with less experience can create both perfect right-angled and angle-independent laser guide lines.   Thanks to its lightweight and compact design and the multifunctional holder included in the delivery, the device is extremely mobile. In addition to a ¼-inch thread for fixing to standard tripods, it also has an integrated suction cup on the holder, which can be used to easily attach it to windows or smooth tiles, for example.     Advantages at a glance   • Projects bright laser lines over a distance of up to 10 m • Self-leveling laser (±4 °) – always automatically aligned straight • Laser projection selectable as cross lines and horizontal or vertical single lines • High accuracy of only ± 0.8 mm/m (at 0°) • Ideal for quick and straight alignment of drill holes, pictures, tiles, wallpaper strips, wall cabinets, shelves, etc. • Includes multifunctional combination mount with universal clamp plus suction cup • State-of-the-art laser technology with ultra-easy handling • Extremely light and ultra-compact • Thanks to battery operation, it can be used anywhere at any time • Laser locking function for projecting even diagonal lines • Operating switch with transport position for secure position fixation of the laser when changing location • Integrated ¼-inch tripod mount   Technical data   Auto-Leveling area ±4 ° Accuracy - Laser ±0.8 mm/m (at 0 °) Accuracy - Laser ±1 mm/m (at ?4 °) reach 10 m laser class 2 laser power < 1 mW wavelength 650 nm multifunctional LED Yes Dimensions H x W x D 72 x 60 x 83 mm Weight 275g buttons and slide switches Yes housing plastic protection class IP40 power supply 2 x 1.5V AA batteries (included) ambient temperature -20 °C to +50°C Gimbal auto-leveling Yes Projection of cross and single lines Yes Laser locking function (transport protection) Yes tripod thread yes, 1/4-inch tripod Multifunctional holder arm (included) Trotec article no. 3,510,205,151 guarantee 2 years

Read more less

This compact multifunctional measuring device combines the functionality of three useful measuring tools (laser rangefinder, cross line laser, tape measure) and is therefore recommended for every pocket of both ambitious DIY enthusiasts and commercial users (e.g. architects, engineers, interior designers, craftsmen).     Uncomplicated distance, area and circumference measurements   As a classic laser distance measuring device, the device easily measures distances of up to 40 m, areas and volumes indoors. For maximum economical use of materials during renovation work, the precise calculation of floor, ceiling or wall areas is one of the easiest tasks for the laser distance meter. A Pythagoras function is also integrated to carry out indirect laser measurements (e.g. height measurements of walls or furniture).     Cross line laser and tape measure included   An integrated cross line laser projects bright laser lines onto surfaces when required, for example to optimally align drill holes, pictures, tiles, wallpaper strips, wall cabinets or shelves. An integrated tape measure (5 m) with a practical return button is ideal for manual measurements in hard-to-reach places.   The outstanding features of the measuring device, which weighs just 295 g, are completed by a practical wrist strap and a belt clip integrated into the device housing.     Multifunctional professional measuring technology at a DIY price   Thanks to its high measuring range of 40 m (laser measurement) and the integrated 5-meter tape measure, the 3-in-1 multifunctional measuring device is recommended for almost all surveying work at home, for hobbies and for crafts.     Designed for rough construction site use   Thanks to its robust housing, the device can withstand even adverse conditions on the construction site. A secure grip in all measuring positions and additional fall protection are provided by an all-round rubber coating in the form of non-slip soft-grip inserts.     Clear view of precise measurement results   The data determined via laser measurement are clearly displayed on the backlit multi-line display and are also saved in the internal data memory (max. 20 measurements). Addition and subtraction of the measurement data is possible, as are continuous measurements with MIN/MAX function (setting function).     Thinks for yourself and switches off automatically when not in use   To ensure maximum operating time, the measuring device has an intelligent automatic switch-off function that automatically switches off the laser after 30 seconds and the entire device after 2 minutes if not in use. This intelligent power-saving function is particularly useful in hectic everyday life on a construction site. The batteries required for operation (2 x 1.5 V AAA batteries) are already included in the scope of delivery.     Advantages at a glance   • 0.05m to 40m laser distance measurement • Indirect distance and height or partial height calculation (3-point Pythagoras functions) • Precise and instantaneous measurement of distances, areas and volumes • Integrated cross line laser (10 m range) • Integrated tape measure (5 m length) • Backlit multi-line display • Continuous measurement mode with MIN / MAX function • Addition and subtraction of measurement results • Automatic storage of the last 20 measured values • Robust workmanship for rough construction site use • Battery status indicator • Power-saving automatic switch-off   Technical data   measuring range 0.05 - 40 m resolution 1 mm measurement accuracy - laser ±0.2 mm Ø laser point at 10 mm distance Ø laser point at 20 mm distance Ø laser point at 30 mm distance 6 mm 11 mm 18 mm reach 10 m laser class 2 laser power < 1 mW Retrieve last measurements 20 Dimensions H x W x D 85 x 82 x 56 mm Weight 290g ambient temperature min. 0°C - max. +40 °C power supply 2 x 1.5V, AAA batteries (included) Trotec article no. 3,510,205,157 guarantee 2 years

Read more less

This two-pole tester is the ideal measuring device for electricians and ambitious DIY enthusiasts. Built and tested according to strict standards, equipped with many professional functions and, thanks to protection class IP64, also ideal for the rough everyday use.   Voltage tests, optical and acoustic continuity tests, two-pole rotating field tests and single-pole tests for phase determination are possible.   Despite its wide range of functions, the device is quick and easy to use. Its ergonomic design and low weight mean it fits comfortably in the hand and offers the user additional safety thanks to the switchable measuring point lighting for working in dark environments.     Advantages for the practice   • Single-pole test for phase determination without counter potential • Versatile two-pole voltage tester for measuring direct or alternating voltage, polarity and rotating field • Optical and acoustic continuity test • Voltage display even when batteries are empty • Automatic shutdown • Integrated flashlight for measuring point illumination • Optimal price-performance ratio • Automatic functional test • Impact-resistant, dust-proof and splash-proof housing     scope of delivery  • Measuring device • Batteries • Operating instructions    Technical data   measuring circuit category CAT III 600 V measuring range 12-690 VDC and 12-400 VAC measuring range continuity test < 300 k? DC and AC voltage automatic detection protection class IP64 voltage display LED bar display test type two-pole contact measurement functions       • optical and acoustic passage indicator • Polarity test • Phase rotation indicator • Option for single-pole phase testing • automatic shutdown • integrated flashlight for measuring point illumination   insulation protection class II, double insulation temperature range 0 °C to 50 °C Security EN 61326, EN 61010-1, EN 61010-02-031 battery type 2 x 1.5 V, IEC LR03 Dimensions (L x W x H) 240 x 78 x 40 mm Weight 237 g Trotec article no. 3,510,205,230 guarantee 2 years

Read more less

The MK 8 measuring cable is an accessory for Gann resistance-based measuring devices. It connects the base device with the associated measuring electrodes such as M6 and others. Matching electrode pairs • Flat electrode pair M 6-Bi 200 and M 6-Bi 300 • Insertable electrode tip pair M 20-Bi 200 and M 20-Bi 300 • Insertable electrode tip pair M 6-150 and M 6-250  Suitable base devices • Hydromette BL E, BL H 40, BL H 41, BL HT 70, H 35, HB 30, HT 65, HT 85 T, M 2050, M 4050, RTU 600, UNI 2  The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered standard among working instruments among professionals in building drying and water damage drying. They are also recognized by damage experts in insurance companies.  Technical data  Gann Article No.: 31003750 Length: 1 m

Read more less

Easy to use, equipped with a high level of functionality and therefore suitable for a variety of different applications and measuring applications. This sums up the advantageous properties of the handy and only 130 g lightweight distance measuring device. With its versatile application possibilities, it is equally suitable for architects, engineers and also craftsmen (e.g. floor fitters, painters and varnishers, drywallers, etc.) and ambitious do-it-yourselfers.     Easy measurement of distance, area and circumference   This device can be used to quickly and easily determine distances, areas and volumes indoors. A Pythagoras function is integrated for indirect measurements (e.g. height measurements of walls or shelves). The timer allows a delayed measurement after 10 seconds. In addition, the all-rounder scores with a built-in measuring wheel to measure even curved lines, curves and circle circumferences in a range of 0 to 10 meters.     Professional measuring technology at a DIY price   With a maximum measuring range of 50 m, a measuring accuracy of +/- 2 mm and extensive comfort features, this measuring device is in no way inferior to even much more expensive models.     Designed for rough construction site use   Thanks to its robust housing, the device is also suitable for use in harsher environments such as on construction sites or in industry. All-round rubber coating with edge protection provides safe fall protection. Non-slip soft-grip inserts in the measuring device also ensure a secure grip in all measuring positions.     Clear view of precise measurement results   The measured data or calculations are clearly displayed on the backlit multi-line display and are also saved in the internal data memory (max. 50 measurements). Addition and subtraction of the measured data is possible, as are continuous measurements with MIN/MAX function.     With spirit level   A spirit level integrated into the housing makes it easier to align the device accurately. This practical spirit level can also be used on the construction site, for example to measure inclinations and uneven ground or to optimally align objects with one another.     Automatic shutdown when not in use   An intelligent automatic switch-off function ensures maximum operating time. If not in use, the laser switches off automatically after 30 seconds and the entire device after 3 minutes. This intelligent power-saving function is particularly useful in hectic everyday construction site life and significantly extends the battery life. The batteries required for operation (2 x 1.5 V AAA batteries) are already included in the scope of delivery.     scope of delivery • Measuring device • Batteries • Quick start guide     Advantages at a glance   • 0.05m to 50m distance measurement • Indirect distance and height or partial height calculation (3-point Pythagoras functions) • Precise and instantaneous measurement of distances, areas and volumes • Integrated measuring wheel for measuring curved lines, curves and circle circumferences (measuring range 0 to 10 m) • Integrated spirit level for precise alignment • Backlit multi-line display • Continuous measurement mode with MIN/MAX function • Addition and subtraction of measurement results • Automatic storage of the last 50 measured values • Robust workmanship for rough construction site use • Measure from the front and rear edges • Battery status indicator • Power-saving automatic switch-off   Technical data   distance measurement measuring range resolution Measurement accuracy typ.   0.05 - 50.00 m 1 mm ±2 mm   Laser Ø laser point at a distance of 6 m Ø laser point at a distance of 11 m Ø laser point at a distance of 18 m laser class laser power     10 mmm 20 mm 30 mm 2 < 1 mW   memory last 50 measurements energy supply Battery (2 x 1.5V AAA, included) ambient temperature 0 - 40 °C Dimensions (L x W x H) 130 x 51 x 28 mm Weight 130 g Selectable units Meter, Feet, Inch Trotec article no. 3,510,205,158 guarantee 2 years

Read more less

Thanks to the combination of simple one-handed operation and precise measuring technology, this device delivers precise measurements of the temperature and relative humidity of the ambient air in a matter of seconds. The dew point and wet bulb temperature measurements, which are also integrated, provide further useful information for controlling the building's climate. In this way, changes in the climate value in different room zones can be determined very easily.   Practical detail: Thanks to the Min/Max function, the minimum or maximum value of the current measurement can be displayed on the automatically illuminated LCD display.     functions   • Maximum and minimum value display • Temperature display in °C and °F • Automatic display lighting • Automatic shutdown     Advantages at a glance   • Measurement of a wide range of climate data with just one device: relative humidity, air temperature, dew point and wet bulb temperature • Optimal price-performance ratio • Dual measurement value display • Minimum and maximum value function • Simple one-handed operation • Automatic display lighting • Automatic shutdown     scope of delivery   • Measuring device • Battery • Operating instructions     Technical data   air temperature     Measuring range: -20 °C to +60 °C (-4 °F to +140 °F) Resolution: 0.1 °C (0.1 °F) Accuracy: ± 1 °C (at 0 °C to 40 °C); ± 2 °C (at -20 °C to 0 °C and 40 °C to 60 °C) humidity     Measuring range: 0 to 100 % RH Resolution: 0.1 % RH Accuracy: ± 3.5 % RH (at 20 % to 80 % RH); ± 5 % RH (at 0 to 20 % and 80 to 100 % RH) Dimensions (L x W x H) 146 x 56 x 34 mm Weight approx. 145 g Trotec article no. 3,510,205,005 guarantee 2 years

Read more less

This compact mini anemometer is the ideal tool for easy flow velocity measurements in many areas. The measurement display can be variably switched to many units: For example, measure wind speeds in kilometers or miles per hour, the performance of fans or ventilation systems, and the flow velocity of gases in meters per second or feet per minute. In addition, wind speeds can also be displayed in nautical miles (knots). This makes it an ideal tool for all sports and leisure activities where the wind plays a role: sailing, surfing or hang gliding.  Practical Details The sensor-controlled display lighting is automatically activated in poor lighting conditions and the energy-saving magnetic impeller increases the battery life of the anemometer.   Advantages at a glance  • Fast and easy measurement of the flow velocity of wind, air or gases • Optimal price-performance ratio • Display of maximum value and average value • Simple one-handed operation • Magnetic impeller • Sensor-controlled display lighting in poor lighting conditions • Automatic shutdown • Tripod thread • Practice-optimized German industrial design - protected design   scope of delivery • Measuring device • Battery • Operating instructions     Technical data   air flow measurement measuring range accuracy resolution measuring principle 1.1 to 30 m/s 3% (=0.3 m/s) 0.01 m/s impeller display LCD interfaces USB energy supply 9V block battery ambient temperature 0 °C to +50 °C Dimensions L x W x H 167 x 56 x 34 mm Weight 139 g tripod thread yes, 1/4 inch Automatic shutdown Yes Trotec article no. 3,510,205,042 guarantee 2 years  

Read more less

This infrared measuring device uses infrared to determine the temperature of surfaces in a matter of seconds. The smartphone is used to control, store and evaluate the data.   The optical resolution is 10:1 with a temperature measuring range of -30 °C to +250 °C. The multi-point laser automatically visualizes the measuring spot size. The preset emissivity saves manual adjustments and covers a wide range of different materials. The measuring device is ready for use immediately, can be easily connected to the app and then displays all measured values ​​on the mobile device.   Compared to conventional pyrometers, users benefit from numerous additional advantages in terms of flexibility, analysis functions, data control and documentation thanks to the "Multimeasure Mobile" app, which are otherwise only found in much more expensive measuring devices. For example, there is the option of multi-coloured graphical representation of temperature curves or the temperature distribution on a wall in the form of a matrix measurement.   By using the app, additional functions and analysis options are available, such as an additional display of maximum, minimum or average values, for example the entry of individual limit values, which automatically trigger an acoustic alarm if they are exceeded or not reached.   Compare different temperature measurements of an object taken at different times directly in the app, or use the appSensor in conjunction with a parallel connected BC21WP thermohygrometer for differentiated dew point control.     functions • Minimum value display • Maximum value display • Average value display • Measured value hold function • Automatic switch-off after approx. 3 minutes without Bluetooth connection • Alarm function • Long-term measurement function • Multi-point laser aiming aid • non-contact measuring method • Diagram/matrix/table representation of the measurement data • Data export • Report function • Display selectable in °C or °F • Battery status indicator     Advantages at a glance   • Non-contact surface temperature measurement from -30 °C to +250 °C • Multipoint laser • Measuring optics 10:1 • Emissivity freely adjustable from 0.1 to 1.0 • High-quality sensors and numerous measuring functions • Intelligent combination of appSensor and the Multimeasure Mobile app • Automatic shutdown   What is an AppSensor?  Trotec appSensors are compact precision measuring devices with high-quality sensors that are designed to save energy and space and do not have any evaluation electronics or display units, as the operation and data evaluation of the devices are carried out almost entirely via the connected smartphone. In combination with the free "MultiMeasure Mobile" app, this measuring device concept offers many advantages. The app is available for IOS and Android.  app "Multimeasure Mobile" "MultiMeasure Mobile" offers you a variety of advantages: • Auto-detection for appSensors • Parallel operation of several appSensors • Fast and intuitive navigation • Measured value display numerically or as diagram / matrix • Integrated report function for on-site documentation • Organizer function for measurement data and documents • Customer management already integrated • Various analysis options directly in the app • Photo-linked measurement value storage • Matrix measurements, also photo-linked • Complete data synchronization to MultiMeasure Professional via Cloud  Your mobile device becomes a multifunctional measurement data manager. All appSensors are automatically recognized and can be connected to the app and read via Bluetooth. Operation is just as simple and intuitive as installation.       scope of delivery   • Measuring device • Battery(s) • Hand strap • Operating instructions     Technical data   max. 10 range in open area Optical resolution (D:S) 10:1 smallest measuring spot Ø 12.7 mm (distance 254 mm) measuring range -30 °C to +250 °C Spectral sensitivity 8 - 14 µm response time 0.3 sec environmental conditions     Temperature 0 °C to 50 °C Humidity 10 to 90% RH Storage -20 °C to °60°C, max. 80% rH laser class 2 (II) laser wavelength 630 - 670nm laser power 1 mW Bluetooth 4.0 Low Energy   2.4 GHz, 10 dBm transmission power Range approx. 10m in open area Weight 110 g energy supply batteries (3 x 1.5V, AAA) Dimensions (L x W x H) approx. 150 x 37 x 24 mm Weight 110 g protection class IP40 Trotec article no. 3,510,006,031 guarantee 2 years  

Read more less

The M 20 is a drive-in electrode for measuring wood moisture and building moisture. It is based on the resistance measuring principle and can be connected to all corresponding "Gann" measuring devices. The electrode is suitable for moisture measurements in sawn timber (up to 50 mm thick), chipboard and OSB boards and parquet. Using a suitable impact device (eg hammer), the electrode can also be driven into hard woods such as beech. It can also be used for measurements in soft, set building materials (eg plaster, gypsum or aerated concrete) as well as insulation and insulating materials. Matching electrode pairs • M20-HW200, M20-HW300 • M20-DS16, M20-DS16-i, M20-OF15 • M20-Bi 200 and M20-Bi 300 • M6-150 and M6-250 Suitable base devices • Hydromette BL E • Hydromette HB 30 • HT 85 T • M 4050 • RTU 600 • UNI 2     The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered standard among working instruments among professionals in building drying and water damage drying. They are also recognized by damage experts in insurance companies.  Technical data Gann Article No.: 31003300 Electrode M20 including 10 electrode tips of 16 and 23 mm 

Read more less