dehumidifier

A high-quality dehumidifier for larger rooms or areas with high levels of humidity. Thanks to the latest technology, it is economical in consumption and can also be used in lower room temperatures down to 3°C. It stands on four castors and is ideal for use in industrial areas, in water supplies or for drying water damage. It is also available with a rack and two large castors as the AD660 Bluedry . The water is collected in a 14-litre condensate tank as standard, with a float automatically stopping operation when the tank is full. The water can also be drained directly via the hose connection. The condensate hose can be plugged directly onto the water nozzle without a coupling (we recommend a clamp for secure attachment). Optional pump kit: A suitable plug-in, fully integrated pump kit is available as an additional option, which can be used to transport the condensate to higher elevations or over greater distances. The pump kit can be easily removed at any time and replaced with a bucket. The built-in operating hour counter shows clearly and quickly how long the device has been in use. The consumption in kWh (consumption counter) is also shown on the display as standard. Two-stage fan.   Characteristics • Housing: Sheet steel coated in stainless steel look • Installation: Four sturdy rubber castors for floor installation • Air flow: Air inlet rear / Air outlet front • Carrying handle: Stable side carrying handles, foldable • Air filter: Protects the device from dust • Fan: 2-stage, energy-efficient EC fan • Condensate drain: Water tank 14 liters with automatic shutdown when full and when drained, hose connection • Pump kit: Flexible pump kit for permanent condensate drainage (accessory) • Blue-Dry technology: For particularly energy-saving operation – even at low humidity and temperatures • Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example. • Hot gas defrosting: Can also be used in cooler environments thanks to automatic self-defrosting. • Suitable for unattended continuous operation Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use.    dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +1°C and +34°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 60.0 liters / 24h (power consumption: 810 W) 27°C / 60% rF = 37.0 liters / 24h (power consumption: 700 W) 20°C / 60% rF = 26.0 liters / 24h (power consumption: 550 W) 10°C / 70% rF = 15.0 liters / 24h (power consumption: 450 W) (RH=relative humidity)    Technical data  Tension: 220-240V / 50Hz Power consumption: max. 810W (3.6A) / 550W (at 20°C/60% RH) Sound pressure level: 1 m distance: 55 dB(A) 2.5 m distance: 53 dB(A) Dehumidification performance: max. 60 liters/day (30°C / 80% RH) air circulation volume: 2-stage 425 / 700 m³/h water bucket: 14 liter capacity, matching pump kit optionally available. Compressor: rotary compressor refrigerant: R454c GWP146 Dimensions (H x W x D): 900 x 540 x 500 mm Weight: 40 kg Operating setting: Digital control panel Ambient temperature: Ambient humidity: 3°C ~ 34°C 30 - 95% RH Application area: up to 180m² (or 400 m³) Swiss plug: Yes hose connection: Yes, suitable hose inner diameter of 12mm = 1/2 inch Operating hour meter: Yes Consumption meter kWh: Yes Guarantee: 2 years

Read more less

A reliable wall-mounted dehumidifier with considerable dehumidification power and an attractive design. A durable, corrosion-protected construction made of powder-coated, galvanized sheet steel ensures maximum reliability for this industrial condenser dryer and, thanks to its protectively painted heat exchanger, makes it particularly resistant to environmental influences.   The combination of high efficiency and low-maintenance design makes the dryer ideal for fully automatic, hygrostat-controlled continuous drying applications in numerous areas of application, and thanks to its autonomous recirculation mode it can also be easily integrated into any application environment at a later date. With its KTL-coated heat exchanger , it is also extremely resistant to environmental influences, even in particularly reactive air environments with high salt, chlorine or solvent content.     Hygrostat controlled and protected against manipulation   The built-in hygrostat automatically regulates the humidity to an optimal level at which condensation, mold or corrosion have no chance. The target humidity can be freely set according to your needs. The smooth-running AC axial fan and the powerful compression refrigeration system ensure high efficiency.   The dry air supplied to the room is simultaneously heated through a process, so that the use of conventional heating and ventilation energy can be reduced.   Thanks to the high-quality hot gas automatic system, the dryer only requires very short defrosting phases. This is ideal, especially when dehumidifying unheated rooms, as the performance level is improved and efficiency increased.   The controls on this industrial dryer are tamper-proof and protected from access by unauthorized persons, which also makes it the ideal dehumidifier in public buildings, staff and changing rooms or museums.     Diverse application possibilities   In wall operation, the device can be used for a wide variety of applications, for example:   • Humidity control in staff rooms, changing rooms, lounges and break rooms • Keeping changing rooms, fitness studios, bike and ski cellars dry • Constant humidity conditions in garages, workshops, test benches or production halls • Dehumidification in archives, collections or libraries • Dehumidification of water technology facilities and pumping stations to prevent condensation on pipes or pumps • Humidity regulation when storing natural products, for example for quality assurance in wood storage or when storing raw tobacco • Corrosion prevention in electrical control centers, boiler systems, turbines and pipe systems in power plants or during the storage of body shells and metal components • Humidity control in data centers, control rooms, etc. • Humidity control in the food industry, for example cheese or confectionery production   Due to the horizontally directed air flow and its compact design, the dehumidifier, which is delivered ready to plug in, is also particularly suitable for installation above door areas.   The condensate extracted from the air is drained directly via a downward-lying hose. If the water needs to be drained to higher areas, please also note our pump kits.     Advantages at a glance   • Professional quality, made in Germany • High dehumidification performance even at low temperatures • Corrosion-protected construction • Fully automatic operation • Professional hot gas automatic defrosting system • Quiet AC axial fan for horizontal air circulation • Ideal for installation above door areas • Control elements installed protected against unauthorized access • Optionally available with condensate pump     Technical data   dehumidification performance at 20 °C / 60 % RH at 30 °C / 80 % RH   20 liters / day 46 liters / day air volume max. 635 m³/ h Maximum room size 130 m² (325 m³) temperature range 5 - 40°C humidity range technically humidity range practice 30 - 90 % RH 40 - 90% RH (finned evaporator) voltage 220 - 240 V/50 Hz nominal current consumption max. 4.2 A power consumption max. 922W Recommended coverage 16 A Plug approx. 3.5m connection cable with EU plug and Swiss fixed adapter refrigerant R-407C (500g) GWP1774 hose connection   Direct hose connection, no bucket suitable hose 10mm inner diameter short hose piece included in delivery operating noise   56 dB(A) at 1 m distance 52 dB(A) at 3 m distance dimensions (W x H x D) 790 x 651 x 255 mm Weight 47 kg defrosting automatic hot gas automatic dehumidification mechanical hygrostat wheel, stepless fan axial, 1-stage fan prefilter Yes operating hour meter no continuous operation possible Yes display no memory function yes (set values ​​remain mechanically fixed) Trotec article no. 1,125,000,116 guarantee 2 years

Read more less

An extremely powerful, mobile dehumidifier based on high voltage. It can be used in a variety of ways, for example for keeping storage rooms with moisture-sensitive products such as medicines, wood and iron goods, paper and leather goods or electronic devices dry. It is also used for drying water damage or for drying in industry (herbs, laundry, etc.). Thanks to the large air flow, it is able to distribute the dry air over a wide area in the room. The device is operated using the digital control panel on the front of the device. The desired target humidity can be entered here in 1% increments. The display shows the currently measured room humidity as well as the set target humidity. The values ​​can be saved using the "Memory" button so that in the event of a power failure, the dryer automatically resumes operation with the same setting. The moist air is sucked in from the front and cleaned by a reusable air filter. The dry air is blown out into the room with a high-quality radial fan and a lot of pressure. The ventilation is single-stage. As standard, the water is led via a hose into a lower floor drain (no tank in the device). The matching condensate hose has an inner diameter of 16mm and can be plugged directly onto the water nozzle without a coupling (a clamp can be used for additional fixation if required). Characteristics • Housing: coated sheet steel • Installation: Four abrasion-resistant rubber feet (2 with brakes) for floor installation • Air flow: frontal air inlet / top air outlet • Carrying handle: Two sturdy, foldable handles on the side for pulling the device • Air filter: Protects the device from dust, washable • Fan: 1-stage, high-quality radial fan • Condensate drain: direct hose connection, suitable hose 16mm inner diameter. • Memory function: After a power failure, the device resumes operation with the same settings. Therefore also suitable for operation with a timer, for example. • Defrosting: Automatic demand-controlled self-defrosting • Compressor: Rotary compressor with phase protection • Suitable for unattended continuous operation The DH7160 is suitable • as a large-area dehumidifier • for dehumidification of warehouses, archives, commercial premises, industrial halls up to 500m²/1300m³ and for drying water damage • for unattended continuous operation • for operation with a timer  dehumidification performance The dryer can be used over a temperature range between +5°C and +32°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% RH = 166.0 liters / 24h 20°C / 60% RH = 57.6 liters / 24h (RH=relative humidity) scope of delivery • Plug-in device (only the rollers need to be screwed on) • short piece of hose (stored behind filter upon delivery) Technical data  Tension Heavy current 3 phase (3N 380-400 V / 50 Hz) power consumption max. 2820 (3.9A) sound pressure level   1 m distance: 73 dB(A) 2.5 m distance: 70 dB(A) dehumidification performance max. 166 liters/day (30°C / 80% RH) amount of recirculated air 1-stage 1700 m³/h water bucket direct hose connection, no bucket compressor rotary compressor refrigerant R407C / 1.39 kg Dimensions (H x W x D) 1624 x 582 x 410 mm Weight 124 kg cessation of operations Digital control panel ambient temperature ambient humidity 5°C ~ 32°C 30 - 90% RH application area up to 500 m² (or 1300 m³) Swiss plug heavy-duty plug CEE16 hose connection Yes operating hour meter No consumption meter kWh No guarantee 2 years                                                 Even more powerful dehumidifiers If you are looking for even more powerful dehumidifiers, please also see our section " Adsorption dryers "

Read more less

The Aerial AD660 is a high-quality, powerful dehumidifier for dehumidifying larger areas on construction sites, in warehouses, industrial and commercial premises. It is also frequently used in water supplies and public facilities (civil defense, army, municipalities). It has a large condensate bucket (14L) with a float, which automatically stops operation when the bucket is full. Alternatively, the extracted water can be fed directly into a floor drain via a hose. If the hose cannot be laid in a downward direction, there is an optional pump kit with which the condensate can be pumped upwards and over longer distances. The socket for connecting the appropriate pump kit is already prepared in the device, so that you can switch between operation with a bucket or pump at any time as required. The moist room air is sucked in at the back of the housing and the dry air is blown out at the front. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device. The device is operated via the control panel on the side. This is comfortable and clear. It shows all the important information and the desired values ​​can be set at the touch of a button. The control panel has the following functions: • On/off switch • Display: kWh and operating hours • Display of actual/target humidity • Setting the desired target humidity (remains even after a power failure) or continuous operation • Setting the fan level (strong/weak) • Display language selectable  Characteristics • Housing: Sheet steel coated in stainless steel look. • Setup: Rack and two large castors for both good stability and mobility. • Air flow: air inlet at the rear / air outlet at the front . • Air filter: Protects the device from dust. • Fan: 2-speed, energy efficient EC fan. • Condensate drain: 14 litre water tank with automatic shut-off when full and when drained, hose connection. • Pump kit: Flexible pump kit for permanent condensate drainage (accessory). • Blue-Dry technology: For particularly energy-saving operation – even at low humidity and temperatures • Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example. • Hot gas defrosting: Can also be used in cooler environments thanks to automatic self-defrosting. • Suitable for unattended continuous operation Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use.   dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +3°C and +34°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 60.0 liters / 24h (power consumption: 810 W) 27°C / 60% rF = 37.0 liters / 24h (power consumption: 700 W) 20°C / 60% rF = 26.0 liters / 24h (power consumption: 550 W) 10°C / 70% rF = 15.0 liters / 24h (power consumption: 450 W) (RH=relative humidity)     Technical data  Tension: 230V / 50Hz Power consumption: 810W max. 550W (at 20°C/60% RH) Sound pressure level: 2.5 m distance 53 dB(A) Dehumidification performance: 60 liters/day (30°C / 80% RH) condensate tank: Approx. 14 liters Air volume level 1 / 2: 425 / 700 m³/h Compressor: rotary compressor refrigerant: R407c Dimensions (H/W/D): 90 x 54 x 50 cm Weight: 40 kg Operating setting: Digital control panel Ambient temperature: 3°C ~ 34°C Swiss plug: Yes Protection class: IPX4 Guarantee: 2 years

Read more less

State-of-the-art drying technology! The 9 series of Aerial construction dryers was developed completely to meet the needs of use on construction sites, in industry and for drying water damage. The dryers have an MID-approved kWh meter and a non-resettable hour meter as standard. Thanks to the CC 6 control, the devices are compatible with the "Simplify" remote monitoring solution, which allows operation to be conveniently monitored remotely. The AD-955 has a 13-litre condensate tank and a connection nozzle for direct drainage of the condensate via a hose. A suitable pump kit is also available, which the device automatically recognises when inserted. The moist room air is sucked in at the front of the housing and the dry air is blown out to the rear. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device.    service   The device is operated via the control panel on the side. With only three buttons, it is comfortable and easy to use. It shows all the important information and the desired values ​​can be set at the touch of a button. • Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Fully graphical display, no translation required     High service friendliness   The housing was designed so that it can be opened with little effort. This means that internal components can be cleaned quickly and easily or replaced if necessary.     Features at a glance   • CC 6 control unit compatible with the Simplify remote monitoring solution • OEM versions available on request (minimum order quantity 50) • Use of standardized components from the Dantherm Group product portfolio ensures quick access to spare parts • Integrated interface for accessories (dew point kit and external hygrostat) • Automatic detection of the pump kit • Various drainage options: standard with Ø15mm hose connection, water tank and optional pump set • MID-approved kWh meter and non-resettable hour meter as standard • 2-speed fan • Integrated night mode for quieter operation in occupied rooms • R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential) • Large wheels • Telescopic handle • Stackable • Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range between +5 °C and +30 °C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 53 liters / 24h (power consumption: 830 W) 20°C / 60% rF = 22.5 liters / 24h (power consumption: 560 W) (RH=relative humidity)     Technical data  Tension 230V / 50Hz power consumption 830 W max. sound pressure level 2.5 m distance 53 dB(A) dehumidification performance 53 liters/day (30°C / 80% RH) condensate tank Approx. 13 liters air volume level 1 / 2 290 / 550 m³/h (night mode: 290 m³/h) compressor rotary compressor refrigerant R454C Dimensions (H x W x D) 845 x 452 x 538 mm Weight 41.8 kg cessation of operations CC 6 control panel, wireless connection with Simplify remote monitoring possible ambient temperature ambient humidity 5 °C - 30 °C 30% RH - 90% RH Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years

Read more less

A powerful dryer for demanding dehumidification tasks in large rooms. Thanks to its robust metal housing and solid internal components, it is designed for a long service life and unattended continuous operation. Due to these properties, it is often used in water management systems, in civil defense shelters and in industry. The moist room air is sucked in at the back of the housing and the dry air is blown out at the front. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device. The water extracted from the air is collected in the large bucket as standard, and operation is automatically interrupted when the bucket is full. Alternatively, the water can also be fed into a lower floor drain via a direct hose connection. If the hose cannot be laid in a falling manner, there is an optional suitable pump kit with which the condensate can be transported upwards and over longer distances. The socket for connecting the suitable pump kit is already prepared in the device, so that you can switch between operation with a bucket or pump at any time as required. service The device is operated via the control panel on the side. This is comfortable and clear. It shows all the important information and the desired values ​​can be set at the touch of a button. The control panel has the following functions: • On/off switch • Display: kWh and operating hours • Display of actual/target humidity • Setting the desired target humidity (remains even after a power failure) or continuous operation • Setting the fan level (strong/weak) • Display language selectable Characteristics • Housing: Sheet steel coated in stainless steel look • Installation: Four sturdy rubber castors for floor installation • Air flow: Air inlet rear / Air outlet front • Carrying handle: Stable side carrying handles, foldable • Air filter: Protects the device from dust • Fan: 1-stage radial fan with high air speed • Condensate drain: Water tank 14 liters with automatic shutdown when full and when drained, hose connection • Pump kit: Flexible pump kit for permanent condensate drainage (accessory) • Blue-Dry technology: For particularly energy-saving operation – even at low humidity and temperatures • Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example. • Hot gas defrosting: Can also be used in cooler environments thanks to automatic self-defrosting. • Suitable for unattended continuous operation Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use. performance and consumption Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +3°C and +32°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 78.0 liters / 24 h (power consumption: 1070 W) 27°C / 60% rF = 56.0 liters / 24 h (power consumption: 910 W) 20°C / 60% rF = 40.0 liters / 24 h (power consumption: 740 W) 10°C / 70% rF = 13.0 liters / 24 h (power consumption: 530 W) (RH = relative humidity)     Technical data  Tension: 230V / 50Hz Power consumption: 1070W max. 740W (at 20°C/60% RH) Sound pressure level: 2.5 m distance 65 dB(A) Dehumidification performance: 78 liters/day (30°C / 80% RH) condensate tank: Approx. 14 liters Air volume level 1 / 2: 600 / 886 m³/h Compressor: rotary compressor refrigerant: R454c GWP146 Dimensions (H/W/D): 79 x 45 x 45 cm Weight: 40 kg Operating setting: Digital control panel Ambient temperature: 3°C ~ 32°C Swiss plug: Yes Protection class: IPX4 Guarantee: 2 years

Read more less

The Aerial AD 750 is a very powerful, robustly built dehumidifier for construction sites and industry. The powerful fan ensures a wide-area exchange of moist and dry air.   The AD750 has a solid housing made of impact-resistant plastic, sturdy guide brackets and side rollers for easy mobility on the floor. The dryer can even be pulled up stairs with these rollers. When used as a construction site dehumidifier, however, the weight should be taken into account; two people are required to move it across floors or scaffolding. The moist air is drawn in at the back via an easily removable air filter. The dry air is blown out at the front through slanted slats. Characteristics • Fan: Axial fan with aluminum impeller. Fan motor with winding protection. • Compressor: Fully hermetic rotary piston compressor, protected against overload, vibration-damped mounting. • Condenser/evaporator: made of copper pipes with aluminum fins. Refrigeration circuit made of copper pipe with capillary tube and filter dryer. Service connection on the suction side. • Self-defrosting: Automatic hot gas defrosting controlled by DryLogic. • Collection container: 12 liters, with automatic full-level shut-off. • Hose connection: nozzle (15 mm) for direct condensate drainage. • Hygrostat: Hygrostat rotary knob • Operating hour counter • 2 large transport wheels: good mobility thanks to 2 large transport wheels, ergonomically shaped housing. • Stackable  designs The AD750 is available in two versions: with bucket without pump or with pump without bucket. Please select the model you require. dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +3°C and +32°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions:  at 30°C / 80% RH = 55.0 liters / day (power consumption: 900 W) at 27°C / 60 %RH = 34.1 liters / day (power consumption: 780 W) at 20°C / 60% RH = 24.5 liters / day (power consumption: 660 W) at 10°C / 70% RH = 14.0 liters / day (power consumption: 560 W)     Technical data Tension: 230V / 50Hz Power consumption: max. 900W (10A) / 660W (at 20°C/60% RH) Sound pressure level: 2.5 m distance 53 dB(A) (manufacturer information) Dehumidification performance: 55 liters/day (30°C / 80% RH) air circulation volume: 710 m³/h (measurement built in) condensate tank: approx. 12 liters Compressor: rotary compressor refrigerant: R407c (550gr.) Dimensions (H/W/D): 88 x 52 x 49.5 cm Weight: 42 kg Operating setting: hygrostat wheel Ambient temperature: 3°C ~ 32°C (40 - 95% RH) Application area: up to 600m³ (temperature-controlled rooms) or 400m³ (unheated) Swiss plug: Yes hose connection: Yes Operating hour meter: Yes Guarantee: 2 years

Read more less

Powerful, robustly built dehumidifier for construction sites and industry with integrated pump. The powerful fan ensures a wide-area exchange of moist and dry air.   The AD750 has a solid housing made of impact-resistant plastic, sturdy guide brackets and side rollers for easy mobility on the floor. The dryer can even be pulled up stairs with these rollers. When used as a construction site dehumidifier, however, the weight should be taken into account; two people are required to move it across floors or scaffolding. The moist air is drawn in at the back via an easily removable air filter. The dry air is blown out at the front through slanted slats. Characteristics • Fan: Axial fan with aluminum impeller. Fan motor with winding protection. • Compressor: Fully hermetic rotary piston compressor, protected against overload, vibration-damped mounting. • Condenser/evaporator: made of copper pipes with aluminum fins. Refrigeration circuit made of copper pipe with capillary tube and filter dryer. Service connection on the suction side. • Self-defrosting: Automatic hot gas defrosting controlled by DryLogic. • Collection container: 12 liters, with automatic full-level shut-off. • Integrated condensate pump: delivery head up to 4 m, additional direct hose connection ( 15 mm nozzle) for direct condensate drainage into the floor drain. • Hygrostat: Hygrostat rotary switch • Operating hour counter • 2 large transport wheels: good mobility thanks to 2 large transport wheels, ergonomically shaped housing. • Stackable  designs The AD750 is available in two versions: with bucket without pump or with pump without bucket. Please select the model you require. dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +3°C and +32°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions:  at 30°C / 80% RH = 55.0 liters / day (power consumption: 900 W) at 27°C / 60 %RH = 34.1 liters / day (power consumption: 780 W) at 20°C / 60% RH = 24.5 liters / day (power consumption: 660 W) at 10°C / 70% RH = 14.0 liters / day (power consumption: 560 W)     Technical data Tension: 230V / 50Hz Power consumption: max. 900W (10A) / 660W (at 20°C/60% RH) Sound pressure level: 2.5 m distance 53 dB(A) (manufacturer information) Dehumidification performance: 55 liters/day (30°C / 80% RH) air circulation volume: 710 m³/h (measurement built in) condensate tank: 750P no bucket Compressor: rotary compressor refrigerant: R407c (550gr.) Dimensions (H/W/D): 88 x 52 x 49.5 cm Weight: 42 kg Operating setting: hygrostat wheel Ambient temperature: 3°C ~ 32°C (40 - 95% RH) Application area: up to 600m³ (temperature-controlled rooms) or 400m³ (unheated) Swiss plug: Yes hose connection: Yes Operating hour meter: Yes Guarantee: 2 years

Read more less

The AD680 is one of the most powerful dehumidifiers and, thanks to its robust design, is often used on construction sites, at sites where damage has occurred (e.g. after flooding or power failures), and in industry. It also performs reliably in unattended continuous operation. The moist room air is sucked in at the back of the housing and the dry air is blown out at the front. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device. The water extracted from the air is collected in the large bucket as standard, and operation is automatically interrupted when the bucket is full. Alternatively, the water can also be fed into a lower floor drain via a direct hose connection. If the hose cannot be laid in a falling manner, there is an optional suitable pump kit with which the condensate can be transported upwards and over longer distances. The socket for connecting the suitable pump kit is already prepared in the device, so that you can switch between operation with a bucket or pump as required at any time. service The device is operated via the control panel on the side. This is comfortable and clear. It shows all the important information and the desired values ​​can be set at the touch of a button. The control panel has the following functions: • On/off switch • Display: kWh and operating hours • Display of actual/target humidity • Setting the desired target humidity (remains even after a power failure) or continuous operation • Setting the fan level (strong/weak) • Display language selectable AD680 Features • Housing: Sheet steel coated in stainless steel look • Setup: Rack and two large wheels for secure positioning and easy mobility • Air flow: Air inlet rear / Air outlet front • Air filter: Protects the device from dust • Fan: 1-stage radial fan with high air speed • Defrosting: Demand-controlled hot gas defrosting • Condensate drain: Water tank 14 liters with automatic shutdown when full and when drained, hose connection • Pump kit: Flexible pump kit for permanent condensate drainage (accessory) • Blue-Dry technology: For particularly energy-saving operation – even at low humidity and temperatures • Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example. • Hot gas defrosting: Can also be used in cooler environments thanks to automatic self-defrosting. • Suitable for unattended continuous operation Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use. performance and consumption Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +3°C and +32°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 78.0 liters / 24 h (power consumption: 1070 W) 27°C / 60% rF = 56.0 liters / 24 h (power consumption: 910 W) 20°C / 60% rF = 40.0 liters / 24 h (power consumption: 740 W) 10°C / 70% rF = 13.0 liters / 24 h (power consumption: 530 W) (RH = relative humidity)     Technical data  Tension: 230V / 50Hz Power consumption: 1070W max. 740W (at 20°C/60% RH) Sound pressure level: 2.5 m distance 65 dB(A) Dehumidification performance: 78 liters/day (30°C / 80% RH) condensate tank: Approx. 14 liters Air volume level 1 / 2: 600 / 886 m³/h Compressor: rotary compressor refrigerant: R454c Dimensions (H/W/D): 79 x 45 x 45 cm Weight: 40 kg Operating setting: Digital control panel Ambient temperature: 3°C ~ 32°C Swiss plug: Yes Protection class: IPX4 Guarantee: 2 years

Read more less

State-of-the-art drying technology! The 9 series of Aerial construction dryers was developed completely to meet the needs of use on construction sites, in industry and for drying water damage. The dryers have an MID-approved kWh meter and a non-resettable hour meter as standard. Thanks to the CC 6 control, the devices are compatible with the "Simplify" remote monitoring solution, which allows operation to be conveniently monitored remotely. Due to its high dehumidification performance, the AD-975 is equipped with a water pump as standard. The moist room air is sucked in at the front of the housing and the dry air is blown out to the rear. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device.     service   The device is operated via the control panel on the side. With only three buttons, it is comfortable and easy to use. It shows all the important information and the desired values ​​can be set at the touch of a button. • Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Fully graphical display, no translation required     High service friendliness   The housing was designed so that it can be opened with little effort. This means that internal components can be cleaned quickly and easily or replaced if necessary.     Features at a glance   • CC 6 control unit compatible with the Simplify remote monitoring solution • OEM versions available on request (minimum order quantity 50) • Use of standardized components from the Dantherm Group product portfolio ensures quick access to spare parts • Integrated interface for accessories (dew point kit and external hygrostat) • Equipped with pump set as standard, no bucket • MID-approved kWh meter and non-resettable hour meter as standard • 2-speed fan • Integrated night mode for quieter operation in occupied rooms • R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential) • Large wheels • Telescopic handle • Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range between +5 °C and +30 °C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 76 liters / 24h (power consumption: 1070 W) 20°C / 60% rF = 34.5 liters / 24h (power consumption: 785 W) (RH=relative humidity)     Technical data  Tension 230V / 50Hz power consumption 1070 W max. sound pressure level 2.5 m distance 64 dB(A) dehumidification performance 76 liters/day (30°C / 80% RH) water pump standard (no bucket), discharge head 4 m air volume level 1 / 2 750 / 900 m³/h (night mode: 750 m³/h) compressor rotary compressor refrigerant R454C Dimensions (H x W x D) 906 x 502 x 547 mm Weight 48.3 kg cessation of operations CC 6 control panel, wireless connection with Simplify remote monitoring possible ambient temperature ambient humidity 5 °C - 30 °C 30% RH - 90% RH Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years

Read more less

State-of-the-art drying technology! The 9 series of Aerial construction dryers was developed completely to meet the needs of use on construction sites, in industry and for drying water damage. The dryers have an MID-approved kWh meter and a non-resettable hour meter as standard. Thanks to the CC 6 control, the devices are compatible with the "Simplify" remote monitoring solution, which allows operation to be conveniently monitored remotely. Due to its high dehumidification performance, the AD-995 is equipped with a water pump as standard. The moist room air is sucked in at the front of the housing and the dry air is blown out to the rear. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device.     service   The device is operated via the control panel on the side. With only three buttons, it is comfortable and easy to use. It shows all the important information and the desired values ​​can be set at the touch of a button. • Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Fully graphical display, no translation required     High service friendliness   The housing was designed so that it can be opened with little effort. This means that internal components can be cleaned quickly and easily or replaced if necessary.     Features at a glance   • CC 6 control unit compatible with the Simplify remote monitoring solution • OEM versions available on request (minimum order quantity 50) • Use of standardized components from the Dantherm Group product portfolio ensures quick access to spare parts • Integrated interface for accessories (dew point kit and external hygrostat) • Equipped with pump set as standard, no bucket • MID-approved kWh meter and non-resettable hour meter as standard • 2-speed fan • Integrated night mode for quieter operation in occupied rooms • R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential) • Large wheels • Telescopic handle • Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range between +5 °C and +30 °C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 95 liters / 24h (power consumption: 1830 W) 20°C / 60% rF = 46.5 liters / 24h (power consumption: 1282 W) (RH=relative humidity)     Technical data  Tension 230V / 50Hz power consumption 1900 W max. sound pressure level 2.5 m distance 64 dB(A) dehumidification performance 76 liters/day (30°C / 80% RH) water pump standard (no bucket), discharge head 4 m air volume level 1 / 2 750 / 900 m³/h (night mode: 750 m³/h) compressor rotary compressor refrigerant R454C Dimensions (H x W x D) 906 x 502 x 547 mm Weight 58.2 kg cessation of operations CC 6 control panel, wireless connection with Simplify remote monitoring possible ambient temperature ambient humidity 5 °C - 30 °C 30% RH - 90% RH Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years

Read more less

These high-quality devices are used in construction and water damage drying as well as in industry, commerce, value preservation and water management. They can be used multifunctionally for dehumidification. The robust, rotationally molded plastic housing is absolutely shock and break-proof and impresses with its high-quality appearance and distinctive design.   The advantages at a glance Robust, rotationally molded plastic housing – absolutely shock and break-proof Easy cleaning and disassembly of the housing for service work High-quality optics and the distinctive design Clear arrangement of the controls facing the user Easy adjustment of the desired room humidity thanks to the built-in hygrostat Standard operating hour counter reliably shows the total operating time Optimal handling and carrying in mobile use thanks to the large transport wheels and various handle options Due to demand-controlled hot gas defrosting, it is ideal for cold areas, e.g. in waterworks, unheated well shafts and pumping stations   Features:   ROBUST HOUSINGS Shock- and impact-resistant plastic housing, robust and easy to clean   STACKABLE The devices are stackable for storage purposes   FAN 2-stage energy-efficient EC axial fan   NOISE LEVEL AD 780-P 55 dB(A)   DEFROST Demand-controlled hot gas defrosting   PRACTICAL CABLE WINDING Proper and safe storage of the power cord Prevents damage and accidents   WHEELS Optimal mobility thanks to two plastic wheels   AIR FLOW air inlet rear air outlet front   REPLACEABLE AIR FILTER Quick and easy to change Protects the device from dirt and dust   HUMIDITY CONTROL Continuously adjustable hygrostat   COUNTER Operating hour counter. Optionally also with combination meter (kWh and operating hours)   Technical data  Tension 230V / 50Hz power consumption 1250 W max. sound pressure level 2.5 m distance 60 dB(A) dehumidification performance 76 liters/day (30°C / 80% RH) water pump standard (no bucket), discharge head 4 m amount of recirculated air 760 m³/h compressor rotary compressor refrigerant R454C Dimensions (H x W x D) 1000 x 640 x 580 mm Weight 57 kg ambient temperature ambient humidity 5 °C - 32 °C 35% RH - 95% RH Swiss plug Yes, cable length approx. 4.5 m hose connection 12 mm hose inner diameter guarantee 2 years

Read more less