An extremely powerful, mobile dehumidifier based on high voltage. It can be used in a variety of ways, for example for keeping storage rooms with moisture-sensitive products such as medicines, wood and iron goods, paper and leather goods or electronic devices dry. It is also used for drying water damage or for drying in industry (herbs, laundry, etc.). Thanks to the large air flow, it is able to distribute the dry air over a wide area in the room. The device is operated using the digital control panel on the front of the device. The desired target humidity can be entered here in 1% increments. The display shows the currently measured room humidity as well as the set target humidity. The values can be saved using the "Memory" button so that in the event of a power failure, the dryer automatically resumes operation with the same setting.
The moist air is sucked in from the front and cleaned by a reusable air filter. The dry air is blown out into the room with a high-quality radial fan and a lot of pressure. The ventilation is single-stage.
As standard, the water is led via a hose into a lower floor drain (no tank in the device). The matching condensate hose has an inner diameter of 16mm and can be plugged directly onto the water nozzle without a coupling (a clamp can be used for additional fixation if required).
Characteristics
• Housing: coated sheet steel
• Installation: Four abrasion-resistant rubber feet (2 with brakes) for floor installation
• Air flow: frontal air inlet / top air outlet
• Carrying handle: Two sturdy, foldable handles on the side for pulling the device
• Air filter: Protects the device from dust, washable
• Fan: 1-stage, high-quality radial fan
• Condensate drain: direct hose connection, suitable hose 16mm inner diameter.
• Memory function: After a power failure, the device resumes operation with the same settings. Therefore also suitable for operation with a timer, for example.
• Defrosting: Automatic demand-controlled self-defrosting
• Compressor: Rotary compressor with phase protection
• Suitable for unattended continuous operation
The DH7160 is suitable
• as a large-area dehumidifier
• for dehumidification of warehouses, archives, commercial premises, industrial halls up to 500m²/1300m³ and for drying water damage
• for unattended continuous operation
• for operation with a timer
dehumidification performance
The dryer can be used over a temperature range between +5°C and +32°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions:
30°C / 80% RH = 166.0 liters / 24h
20°C / 60% RH = 57.6 liters / 24h
(RH=relative humidity)
scope of delivery
• Plug-in device (only the rollers need to be screwed on)
• short piece of hose (stored behind filter upon delivery)
Technical data
| Tension
|
Heavy current 3 phase (3N 380-400 V / 50 Hz)
|
| power consumption
|
max. 2820 (3.9A)
|
|
sound pressure level
|
1 m distance: 73 dB(A)
2.5 m distance: 70 dB(A)
|
| dehumidification performance
|
max. 166 liters/day (30°C / 80% RH)
|
| amount of recirculated air
|
1-stage 1700 m³/h
|
| water bucket
|
direct hose connection, no bucket
|
| compressor
|
rotary compressor
|
| refrigerant
|
R407C / 1.39 kg
|
| Dimensions (H x W x D)
|
1624 x 582 x 410 mm
|
| Weight
|
124 kg
|
| cessation of operations
|
Digital control panel |
ambient temperature
ambient humidity
|
5°C ~ 32°C
30 - 90% RH
|
| application area
|
up to 500 m² (or 1300 m³)
|
| Swiss plug
|
heavy-duty plug CEE16
|
| hose connection
|
Yes
|
| operating hour meter
|
No
|
| consumption meter kWh
|
No
|
| guarantee
|
2 years |
