A powerful dryer for demanding dehumidification tasks in large rooms. Thanks to its robust metal housing and solid internal components, it is designed for a long service life and unattended continuous operation. Due to these properties, it is often used in water management systems, in civil defense shelters and in industry. The moist room air is sucked in at the back of the housing and the dry air is blown out at the front. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device. The water extracted from the air is collected in the large bucket as standard, and operation is automatically interrupted when the bucket is full. Alternatively, the water can also be fed into a lower floor drain via a direct hose connection. If the hose cannot be laid in a falling manner, there is an optional suitable pump kit with which the condensate can be transported upwards and over longer distances. The socket for connecting the suitable pump kit is already prepared in the device, so that you can switch between operation with a bucket or pump at any time as required. service The device is operated via the control panel on the side. This is comfortable and clear. It shows all the important information and the desired values can be set at the touch of a button. The control panel has the following functions: • On/off switch • Display: kWh and operating hours • Display of actual/target humidity • Setting the desired target humidity (remains even after a power failure) or continuous operation • Setting the fan level (strong/weak) • Display language selectable Characteristics
• Housing: Sheet steel coated in stainless steel look
• Installation: Four sturdy rubber castors for floor installation
• Air flow: Air inlet rear / Air outlet front
• Carrying handle: Stable side carrying handles, foldable
• Air filter: Protects the device from dust
• Fan: 1-stage radial fan with high air speed
• Condensate drain: Water tank 14 liters with automatic shutdown when full and when drained, hose connection
• Pump kit: Flexible pump kit for permanent condensate drainage (accessory)
• Blue-Dry technology: For particularly energy-saving operation – even at low humidity and temperatures
• Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example.
• Hot gas defrosting: Can also be used in cooler environments thanks to automatic self-defrosting.
• Suitable for unattended continuous operation
Aerial "eDRY®" for efficient air dehumidification
The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use.
performance and consumption Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +3°C and +32°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 78.0 liters / 24 h (power consumption: 1070 W) 27°C / 60% rF = 56.0 liters / 24 h (power consumption: 910 W) 20°C / 60% rF = 40.0 liters / 24 h (power consumption: 740 W) 10°C / 70% rF = 13.0 liters / 24 h (power consumption: 530 W) (RH = relative humidity)
