Dryfix Vario Metal clothesline system, 15 cm line spacing Complete wall-to-wall clothesline system for self-assembly, can be combined with wall or ceiling supports and expanded to a wall-to-ceiling or ceiling-to-ceiling system. Pre-assembled rollers. The screws/dowels required for assembly can be ordered free of charge on request. White plasticized wire rope and chrome-plated rope tensioner for optimal load-bearing capacity. 0.78 m wide (6 lanes) with 20 m rope (line length max. 3.20 m) 30 m rope (line length max. 4.80 m) 40 m rope (line length max. 6.50 m) 50 m rope (line length max. 8.20 m) 1.08 m wide (8 lanes) with 20 m rope (line length max. 2.35 m) 30 m rope (line length max. 3.60 m) 40 m rope (line length max. 4.85 m) 50 m rope (line length max. 6.10 m) 1.23 m wide (9 lanes) with 20 m rope (line length max. 2.05 m) 30 m rope (line length max. 3.15 m) 40 m rope (line length max. 4.25 m) 50 m rope (line length max. 5.35 m) 1.53 m wide (11 lanes) with 30 m rope (line length max. 2.55 m) 40 m rope (line length max. 3.45 m) 50 m rope (line length max. 4.35 m) 70 m rope (line length max. 6.20 m) 1.83 m wide (13 lanes) with 30 m rope (line length max. 2.15 m) 40 m rope (line length max. 2.90 m) 50 m rope (line length max. 3.65 m) 70 m rope (line length max. 5.20 m) 2.28 m wide (16 lanes) with 30 m rope (line length max. 1.70 m) 40 m rope (line length max. 2.35 m) 50 m rope (line length max. 2.95 m) 70 m rope (line length max. 4.20 m) Can be combined with all wall or ceiling supports from Dryfix, Krüger, Lübra. Up to 1.53m rail length, two supports per side are sufficient, above this we recommend 3 supports per side due to the strong cable tension. The set consists of: - 2 x connecting rails made of sturdy metal (4mm thick), perforated for wall mounting - Dryfix rollers (15 cm distance between the lines), color selectable black, yellow, blue - 1 rope tensioner - plasticized wire rope white - on request: free dowels and screws for wall mounting To calculate the correct rope length, calculate (Room length x number of tracks) + (1 x rail width) + approx. 10 cm for pulling the rope end into the rope tensioner. In this package the rollers are pre-mounted on the support rails. Installation option: If you would like to have the system professionally installed at your location, please ask for a quote (depending on distance and any other items that may need to be installed). Shipping costs for 1 set Fr. 14.- (due to the size of the package we only send these laundry hangers by courier). Technical data Dryfix Vario Metal complete 0.78m with 20m rope: 6793g with 30m rope: 7013g with 40m rope: 7282g with 50m rope: 7523g 1.08m with 20m rope: 8019g with 30m rope: 8239g with 40m rope: 8508g with 50m rope: 8749g with 70m rope: 9257g 1.53m with 30m rope: 11579g with 40m rope: 11848g with 50m rope: 12089g with 70m rope: 12597g 2.28m with 30m rope: 14093g with 40m rope: 14362g with 50m rope: 14603g with 70m rope: 15111g

Read more less

Thanks to the latest technology, the "Royal24" is highly efficient and economical. The R290 refrigerant it contains has hardly any impact on the environment. The "Global Warming Potential (GWP)" is an incredible value of 3, which corresponds to a reduction of 99.85% compared to comparable models of previous generations! It is also significantly quieter in terms of operating noise than other devices in the same performance category. The WIFI function is a practical addition, but as with all models in the "Dryfix Royal" series, the device can also be adjusted in a "traditional" way via the control panel directly on the device.     service The "Royal24" can be operated directly via WIFI as well as via a control panel on the top of the housing. Setting the target humidity: The desired target humidity can be set at the touch of a button, i.e. the value at which the device should keep the room stable. If the measured humidity in the room is higher, the device will operate. If the humidity is correct, the device pauses, stopping not only the compressor but also the fan. This is an important point in terms of power consumption and distinguishes the "Royal" from many commercially available products on the market. The desired target humidity can be selected in 5% increments in the range between 30 - 80% relative humidity. To protect a room from mold and odors, a value of around 60% is sufficient, so the ideal setting is 55 or 60%. Lower values ​​do not provide any additional benefit, unless you are drying laundry or there is water damage. Setting mode: There are three drying options to choose from. a) Continuous operation (for drying laundry) b) Room monitoring mode, when the humidity should not exceed a certain value. c) Night mode, in which the ventilation is set to low and the lighting is minimized. Ventilation setting: You can choose between strong and weak ventilation at the touch of a button. On the weak fan setting, operation is very quiet, on the stronger fan setting, the air volume increases, which is an advantage especially in larger rooms. The "Royal24" sucks in the moist room air at the back of the device, where it is cleaned by a removable coarse dust filter. The filter can be removed very easily and cleaned under water. It does not need to be replaced. An internal counter reminds you that the filter should be cleaned after every 600 hours of operation (= approx. once a month). The dry air outlet is at the top of the device. Timer: with the timer, operation can be limited either "from now" (1-12 hours) or started at a time 1-12 hours in the future, for example if you want to start operation at the low tariff. Memory function: If you want to run the device at the same time every day (for example during off-peak hours), you can do this with a standard timer. The "Royal24" remembers the last setting and returns with the same settings after a power failure. Key lock: Prevents unauthorized persons (e.g. children) from playing around with the device and changing the settings. Additional features: 3-color display : There is a light on the front that uses three colors to indicate whether the air is very dry, OK, or too humid. A quick glance at the device is enough to quickly find out about the condition of the air. Mobile on wheels : The "Royal24" has four wheels, making it easy to move around the room. There are also two recessed handles on the side with which the dehumidifier can be lifted. " Dryfix Intelligence ": The software we have developed for particularly economical stop-and-go operation. Prevents the compressor from starting up too often and thus saves a lot of electricity. The software also checks whether the room temperature is too cold or too warm for operation and interrupts operation if necessary. WIFI control WIFI control: In addition to the operation on the device itself, all models in the "Royal" series are equipped with WIFI control. The "Smart Life" app used for this purpose can be downloaded free of charge for iOS and Android. Minimum requirement: iPhone and iPod: iOS 11.0 or later Apple Watch: watchOS 6.0 or higher Android: newer mobile phone series from 2020, Android 5.0 or higher "Smart Life" is very simple and clear. It has been around for a number of household appliances for a long time and is therefore well developed and tested. To use the app, the dehumidifier only needs to be connected to WiFi in the house. Setting up the app once only takes a few minutes. Once set up, you can monitor and regulate your dehumidifier from anywhere in the world via your cell phone and also request real-time information about the current humidity in the room. This is very practical when traveling abroad and for use in holiday homes. Advantages and Features • Dehumidification capacity of up to 24 litres per day (at a constant 30°C/80% RH), suitable for rooms up to 60m² • Mobile tumble dryer: in at least slightly temperate rooms, the "Royal24" can dry 1-2 washing machine loads per day. • Color indicator for quick recognition of the room status • 24-hour timer to set the operating time • Very low power consumption - energy efficient • For this performance class, significantly quieter operation than other devices, fan has two speed levels • Automatic defrosting at low temperature • Auto mode: Switch off / restart automatically depending on room humidity • Electronic control • Antibacterial filter • 5 L water tank with viewing window and float (automatically stops operation when full), inserted at the side • Direct hose connection (suitable hose: 10mm inner diameter) • WIFI-enabled • optional HEPA filter • Automatic shutdown if the temperature is too cold or too warm   Optional HEPA filter A suitable HEPA filter is available for this model if required. This can be ordered from us as an additional option (not included with the device). The HEPA filter cleans the air of fine dust, pollen, viruses and bacteria with a purity rate of almost 100%. When drying laundry in particular, allergy sufferers appreciate that pollen flying around the room is caught by the filter and is therefore not absorbed by hanging items of clothing or bed linen. The "Royal24" can also be used with the HEPA filter as an air purifier without dehumidification.    scope of delivery The scope of delivery includes the plug-in device including a connection cable with Swiss plug and a short piece of hose for the direct drainage of the condensate . Technical data Tension 220V-240V / 50Hz power consumption 250W at 20°C/60% RH, max. 380W/1.25A operating noise 1 m distance 2.5 m distance ?46dB(A) depending on fan speed ?43dB(A) depending on fan speed Min./Max. room size 4 / 60 m² dehumidification performance 24 liters/day (30°C / 80% RH) condensate tank Approx. 5 liters compressor rotary compressor refrigerant R290, 75g Dimensions (H x W x D) 565 x 355 x 220 mm Weight 13.5 kg cessation of operations Digital ambient temperature 5°C ~ 35°C application area basement, hobby room, apartment, bedroom, laundry drying Swiss plug Yes hose connection Yes, suitable hose inner diameter 10mm Global Warming Potential (GWP) 3 guarantee 2 years

Read more less

sold out until spring 2025 A powerful dehumidifier with a semi-professional design. The metal casing and the internal components are solid and durable. The X40 is particularly efficient in a classic basement environment, but also economical in consumption. service The target humidity can be set using the clear control panel on the top of the device. Once the target humidity is reached, the dehumidification operation pauses while only the ventilation continues to determine the current humidity. Various setting options are available:  continuous operation The device runs continuously and ignores the measured room humidity. This setting is useful if you want to dry laundry or when drying water damage.  Operation with selected target humidity 30 – 90% Any target humidity value between 30% and 90% can be selected at the touch of a button (5% increments). To prevent mold and odors, it is sufficient to maintain a humidity of around 60%. The ideal setting is therefore 55 or 60%. For economical operation, the software has a tolerance of 6% so that the compressor does not start at too short intervals. The set target humidity value corresponds to the average value +-3%. This means that the drying process runs until the set value is undershot by 3%. The operation then pauses until the set value is overshot by 3%. So if you select 55%, for example, the room humidity fluctuates between min. 52% - max. 58%. comfort mode The "Dryfix Intelligence" control automatically optimizes operation taking the room temperature into account: - If the ambient temperature is below 5° C, the compressor stops to prevent the unit from icing up. - When the ambient temperature is higher than 5°C and lower than 20°C, the device operates with a target humidity of 60%. - When the ambient temperature is higher than 20°C and lower than 27°C, the device operates with a target humidity of 55%. - If the ambient temperature is higher than 27° C, the device operates with a target humidity of 50%. large tank The condensate tank, which is inserted at the back, holds 6.5 liters and stops operation when it is full using the integrated float magnetically. The fill level is immediately visible on the front of the device: blue light = operation in progress, red light = tank full or not inserted correctly (operation is interrupted). The hose connection is located directly above the tank, through which the condensate can also be drained directly into a drain (suitable hose: 10 mm inner diameter).  Two ventilation levels The air flow is powerful. The slats at the top of the device can also be used to direct the dry air in a certain direction. This is very useful if, for example, you want to blow into a laundry hanger or onto a damp wall. Due to the powerful ventilation, the operating noise is easily audible (a noise comparable to that of a steam extractor). At the touch of a button, you can choose between weak (quieter) or strong ventilation. With this model, the compressor (= dehumidification) stops when the desired humidity is reached, while the fan runs continuously to circulate the room air. Features & advantages over other dehumidifiers: • Digital control panel for regulating the desired humidity • Automatic function, ie the dehumidification mode switches off automatically when the target humidity level is reached and also switches on again automatically when it becomes more humid (including a +/- 6% power saving function so that the device does not switch on and off unnecessarily often. • Automatic professional defrost function • Suitable for unattended use • Also suitable for continuous operation/continuous dehumidification • Optimized for use in classic basement environments • Power consumption of only 470W at 20°C/60% humidity (starting current max. 700W) • Equipped with a very reliable quality brand compressor • Comfort program with protection at unsuitably cold room temperatures • No adjustments in case of power failure (device continues where it was interrupted) • Auto-stop when condensate tank is full including warning light • Removable 6.5 liter condensate tank • Possibility of connecting a hose for continuous drainage of the condensate. • Absolutely maintenance-free / No separate or renewed coolant is required (closed circuit) • Very easy mobility thanks to side handles and castors • Washable air filter • Modern design and attractive appearance • The device is ready for use immediately (no installation or assembly required) • CFC free • CE, GS and RoHS tested • Latest, environmentally friendly refrigerant R290 (GWP: 3) usage examples Cellar damp : Ideal for damp cellars, old walls and laundry rooms. Eliminates musty smells, stops mold growth, decomposition of masonry and much more. Mobile clothes dryer : the device is also very popular as a mobile clothes dryer. Close the laundry room windows and doors and, depending on the size of the laundry room, the laundry will dry overnight. dehumidification performance The dryer can be used over a wide temperature range between +5°C and +35°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% humid: 40 liters (90%: 44 liters, 60%: 22 liters) 20°C / 80% humid: 22 liters (90%: 28 liters, 60%: 14 liters) 15°C / 80% humid: 18 liters (90%: 22 liters, 60%: 10 liters) 10°C / 80% humid: 12 liters (90%: 16 liters, 60%: 8 liters) 5°C / 80% humid: 9 liters (90%: 11 liters, 60%: 5 liters) HEPA filter option In addition to the standard filter, which filters the dust out of the air, a HEPA filter can be ordered for the X40. This HEPA filter cleans the air every time the device passes through with a purity rate of almost 100%. This means that even the finest particles such as pollen, fine dust, mold spores and other tiny contaminants are intercepted. Also viruses of all kinds (including corona). The filter is therefore highly recommended, for example in basements with mold infestation, but also when drying laundry so that flying pollen is not blown through the hanging laundry and contaminates it (e.g. in the case of pollen allergy). The HEPA filter is a consumable and cannot be washed. The price of CHF 38 includes the filter with holder. For repeat orders, the filter alone without holder can be reordered at a reduced price of CHF 29. scope of delivery Plug-in ready device, no assembly required. The optional HEPA filter is not included in the basic package.  Technical data   Tension 220V-240V / 50Hz power consumption max. 700W max. / 470W (at 20°C/60% RH) sound pressure level (our measurement) 1 m distance 56 dB(A), 2.5 m distance 54 dB(A) dehumidification performance max. 40 liters/day (30°C / 80% RH) drying clothes about 3-4 washing machine loads per day condensate tank Approx. 6.5 liters refrigerant: R290 / 148 gr. Dimensions (H x W x D) 540 x 400 x 310 mm Weight 23 kg cessation of operations Digital ambient temperature Manufacturer's specification 5°C ~ 35°C (our recommendation: from 7°C) Swiss plug Yes hose connection Yes / suitable hose 10mm inner diameter guarantee 2 years

Read more less

A good, affordable racehorse for construction dryers and water damage repairers. Everything that is unnecessary for continuous use has been consistently left out of this dehumidifier. It has neither a display nor a hygrostat (a plug-in hygrostat can be ordered as an option if required). This makes it very easy to use, safe from tampering and extremely affordable. On the other hand, everything that is needed for effective and fast drying is there: powerful dehumidification performance, hot gas defrosting, hour counter as well as large rollers and a guide bar for easy mobility on construction and damage sites.     Easy operation   Commissioning is child's play. Plug in, flip the main switch, and you're done!   The operation will now continue until either the bucket is full or until the dryer is uninstalled. As long as the device is connected to the power supply, it will run reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power failure: if the power comes back on, the dehumidifier will continue its task with the same settings.   Thanks to the professional hot gas automation, it can also be used in cooler environments without any problems, although the dehumidification power decreases at cold temperatures, as with all condensation dryers. The built-in finned evaporator (cooling element) has an extremely high efficiency in temperate environments and can dry the air to just under 40% RH. The dryer is also equipped with a rotary piston compressor. This means that it can be transported and stored in any position.     Optional hygrostat   Should a hygrostat be required at some point to regulate the target humidity, the dryer is prepared so that the Trotec hygrostat HG110 can be connected directly using a jack plug. Please note the accessories.     bucket and direct hose connection   The water extracted from the air is collected in a 5-litre bucket. A magnetic float automatically stops operation when the bucket is full and a warning light indicates visually that the bucket should be emptied. If necessary, a hose can be connected to the bucket itself if the water can be drained away directly. The hose must be laid in a downward direction as there is no pump integrated into the dryer.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be determined precisely using the hour counter that is integrated as standard. This is particularly useful for commercial applications. Thanks to the counter, it is also possible to determine whether the device was always in operation or whether it was switched off accidentally or intentionally.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection.   The natural refrigerant propane (R290) is an organic compound and is classified as a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Additional benefit for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.     Advantages at a glance   • Affordable price with strong performance in the commercial sector • Can also be used in cooler environments thanks to hot gas defrosting • Robust steel construction with large rollers and guide bar • Suitable for continuous operation • Can be transported and stored in any position thanks to the rotary piston compressor • External hygrostat connection     Technical data   dehumidification performance at 30 °C / 80 % RH 50 liters / day air volume 350 m³/h Maximum room size 125 m² (310 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C humidity range technically humidity range practice 35 - 90 % RH 40 - 90% RH (finned evaporator) voltage 220 - 240 V/50 Hz nominal current consumption max. 3.7 A power consumption max. 820W Recommended coverage 10 A cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5 liters operating noise 56 dB(A) at 1 m distance 53 dB(A) at 2.5 m distance Dimensions D x W x H 495 x 455 x 900 mm Weight 31 kg defrosting automatic hot gas automatic dehumidification Continuous operation, a plug-in mechanical hygrostat is available as an option. fan axial, 1-stage fan automatic shutdown when bucket is full Yes prefilter Yes operating hour meter Yes continuous operation possible Yes display no memory function yes (saves set values ​​automatically) hose connection yes, not included in delivery (suitable inner diameter: 12 mm) guarantee 2 years

Read more less

The Quadro X80 is a very powerful dehumidifier with a semi-professional design. The metal casing and the internal components are solid and durable. The X80 is particularly efficient in a classic basement environment, but also economical in consumption. service The target humidity can be set using the clear control panel on the top of the device. Once the target humidity is reached, the dehumidification operation pauses while only the ventilation continues to determine the current humidity. Various setting options are available:  continuous operation The device runs continuously and ignores the measured room humidity. This setting is useful if you want to dry laundry or when drying water damage.  Operation with selected target humidity 30 – 90% Any target humidity value between 30% and 90% can be selected at the touch of a button (5% increments). To prevent mold and odors, it is sufficient to maintain a humidity of around 60%. The ideal setting is therefore 55 or 60%. For economical operation, the software has a tolerance of 6% so that the compressor does not start at too short intervals. The set target humidity value corresponds to the average value +-3%. This means that the drying process runs until the set value is undershot by 3%. The operation then pauses until the set value is overshot by 3%. So if you select 55%, for example, the room humidity fluctuates between min. 52% - max. 58%. comfort mode The "Dryfix Intelligence" control automatically optimizes operation taking the room temperature into account: - If the ambient temperature is below 5° C, the compressor stops to prevent the unit from icing up. - When the ambient temperature is higher than 5°C and lower than 20°C, the device operates with a target humidity of 60%. - When the ambient temperature is higher than 20°C and lower than 27°C, the device operates with a target humidity of 55%. - If the ambient temperature is higher than 27° C, the device operates with a target humidity of 50%. large tank The condensate tank, which is inserted at the back, holds 6.5 liters and stops operation when it is full using the integrated float magnetically. The fill level is immediately visible on the front of the device: blue light = operation in progress, red light = tank full or not inserted correctly (operation is interrupted). The hose connection is located directly above the tank, through which the condensate can also be drained directly into a drain (suitable hose: 10 mm inner diameter).  Two ventilation levels The air flow is powerful. The slats at the top of the device can also be used to direct the dry air in a certain direction. This is very useful if, for example, you want to blow into a laundry line or onto a damp wall. Due to the powerful ventilation, the operating noise is easily audible (a noise comparable to that of a steam extractor). At the touch of a button, you can choose between weak (quieter) or strong ventilation. With this model, the compressor (= dehumidification) stops when the desired humidity is reached, while the fan runs continuously to circulate the room air. Features & advantages over other dehumidifiers: • Digital control panel for regulating the desired humidity • Automatic function, ie the dehumidification mode switches off automatically when the target humidity level is reached and also switches on again automatically when it becomes more humid (including a +/- 6% power saving function so that the device does not switch on and off unnecessarily often. • Automatic professional defrost function • Suitable for unattended use • Also suitable for continuous operation/continuous dehumidification • Optimized for use in classic basement environments • Low power consumption compared to the powerful performance • Equipped with a very reliable quality brand compressor • Comfort program with protection at unsuitably cold room temperatures • No adjustments in the event of a power failure (device continues where it was interrupted) • Auto-stop when condensate tank is full including warning light • Removable 6.5 liter condensate tank • Possibility of connecting a hose for continuous drainage of the condensate. • Absolutely maintenance-free / No separate or renewed coolant is required (closed circuit) • Very easy mobility thanks to side handles and castors • Washable air filter • Modern design and attractive appearance • The device is ready for use immediately (no installation or assembly required) • CFC free • CE, GS and RoHS tested • Latest, environmentally friendly refrigerant R290 (GWP: 3) usage examples Cellar damp : Ideal for damp cellars, old walls and laundry rooms. Eliminates musty smells, stops mold growth, decomposition of masonry and much more. Mobile clothes dryer : the device is also very popular as a mobile clothes dryer. Close the laundry room windows and doors and, depending on the size of the laundry room, the laundry will dry overnight. dehumidification performance The dryer can be used over a wide temperature range between +7°C and +35°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% humid: 80 liters (90%: 88 liters, 60%: 44 liters) 20°C / 80% humid: 44 liters (90%: 56 liters, 60%: 28 liters) 15°C / 80% humid: 36 liters (90%: 44 liters, 60%: 20 liters) 10°C / 80% humid: 24 liters (90%: 32 liters, 60%: 16 liters) 5°C / 80% humid: 18 liters (90%: 22 liters, 60%: 10 liters) HEPA filter option In addition to the standard filter, which filters dust out of the air, a HEPA filter can be ordered for the X80. This HEPA filter cleans the air every time it passes through the device with a purity rate of almost 100%. This means that even the finest particles such as pollen, fine dust, mold spores and other tiny contaminants are intercepted. Also viruses of all kinds (including corona). The filter is therefore highly recommended, for example in basements with mold infestation, but also when drying laundry so that flying pollen is not blown through the hanging laundry and contaminates it (e.g. in the case of pollen allergy). The HEPA filter is a consumable and cannot be washed. The price of CHF 38 includes the filter with holder. For repeat orders, the filter alone without holder can be reordered at a reduced price of CHF 29. scope of delivery Plug-in ready device, no assembly required. The optional HEPA filter is not included in the basic package.  Technical data  Tension 220V-240V / 50Hz power consumption max. 1291W max. / 940W (at 20°C/60% RH) sound pressure level 1 m distance 56 dB(A) (our measurement) 2.5 m distance 54 dB(A) (our measurement) dehumidification performance 80 liters/day (30°C / 80% RH) condensate tank Approx. 6.5 liters compressor rotary compressor refrigerant R290 / 180 g Dimensions (H x W x D) 64.5 x 40 x 31 cm Weight 24 kg cessation of operations Digital ambient temperature Manufacturer's information: 5°C - 35°C (our recommendation: 7°C ~ 35°C) application area general room dehumidification: up to approx. 200m² Laundry drying: dries 6-8 washing machine loads per day Swiss plug: Yes hose connection Yes guarantee 2 years

Read more less

If you like your laundry to dry more quickly, the WT 240D is a good, powerful machine. The WT240 is the most economical of the new WT series from Aerial. A reliable helper in busy laundry rooms. service The device is very easy to operate using the easy-to-understand digital controls on the front. The display provides the current information about the room status and the selected program. The display languages ​​available are German, French, Italian and English. Drying programs: The laundry drying program can be started at the touch of a button. The dehumidifier runs until the laundry is dry and then switches off automatically. With the help of three pre-programmed drying levels, you can choose between partially dry, iron-dry or cupboard dry. All pre-programmed moisture values ​​can be changed at any time according to your own wishes. The dryer also has a general room monitoring function to prevent mold and odors in the basement. The device switches on automatically whenever the room humidity rises above the mold and odor limit of 60% RH. This humidity value can also be changed as desired. Unlike the laundry drying programs, the dryer never switches off completely in this mode, but only pauses as long as the humidity is right. If the humidity rises again, the drying mode switches back on. In both programs, both the current humidity and the target humidity are visible on the display. Blower and fan speeds: The blower is an electronically operated, economical radial fan. The dry air jet goes slightly downwards from the outlet, which means that the air is blown into the lower part of the laundry, where the laundry is normally the wettest. This falling wind tunnel is also very practical if you set up a clothes rack in front of the device. Selectable fan settings: The WT tumble dryers are the only devices of this type where the fan setting can be regulated. Even the weaker setting has a very respectable air flow, but significantly reduces the operating noise. If the laundry hanger is fully loaded, the strong fan setting is recommended in order to force the dry air through the laundry as forcefully as possible. This produces faster and more even drying results. On the strong setting, the dry air jet can also reach items of laundry that are far away, up to around 8m away. Adjustable air slats: Flexible slats are attached to the air outlet, which can be adjusted laterally and in height so that the air can be adjusted more precisely to the length/width of the clothesline. Direct hose connection: The water extracted from the laundry runs into a hose which, on the WT devices, is attached slightly below the back wall, rather than on the underside of the device as is usual. This is an advantage over other models if the gradient to the drain is not very great or if the device is to be hung a little lower. There is no pump integrated into the device, so the hose must have a constant gradient to the drain. If there is no drain, the water can of course also be easily collected in a bucket placed under the device. We have suitable inlet pipes and buckets in our range if required. Air filter: The moist room air is sucked in at the top of the front. A magnetically attached filter with a frame cleans the air of coarse dust and fluff so that the inside of the device remains clean. The filter consists of a very fine, close-meshed nylon net. This has a high cleaning power, is easy to clean and, if treated correctly, usually lasts for the entire life of the dryer. Memory function: The settings are saved in the room monitoring program. If the power is interrupted, the dryer will resume operation with the same settings. It is therefore also suitable for operation with a timer, for example if you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted. Room temperature: Technically, Aerial's WT dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimum drying speed, 15°C and higher are optimal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe: The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing institute for tumble dryers, "Swiss Testing". Service-friendly device construction: The entire cover can be removed from the device in just a few easy steps. This makes handling easier when cleaning or servicing is required, as the device does not have to be removed from the wall.  mounting on the wall As with all tumble dryers, installation is extremely simple: a mounting rail is anchored into the wall with 2 screws, and the device can then be hung up. All necessary installation material such as screws/anchors and 2m of hose is included in the scope of delivery. Both the support rail and the two buffers in the lower area of ​​the device that support the wall are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the sink using the hose if possible (hose is included in the scope of delivery). If you want to use a bucket, please ensure that it has enough capacity (at least 8 liters) to avoid overflowing while drying laundry. If mounting on the wall is not possible, you will find suitable chassis in our range to which the dryer can be mounted. If you wish, we can professionally install the dryer at your home. Price on request. Important: • Sanitary (drain) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate tradesman, if one does not already exist. • If your wall has internal insulation, we need to know this when ordering, as installation is more complex. The installation prices quoted refer to direct wall installation, i.e. directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls are charged according to the effort involved.  Technical data drying room: up to 20 m² Drying performance: 1.93 Kg/h Consumption per kg of laundry: 0.26 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 620W or 440W (at 20°C/60% RH) Sound pressure level: 2.5 m distance 62 dB(A) 2.5 m distance 68 dB(A) fan speed 2 (our measurement) Examples of dehumidification performance and consumption: at 30°C / 80% RH = 36.5 L/24h (power consumption: 570 W) at 27°C / 60% rH = 21.6 L/24h (power consumption: 500 W) at 20°C / 60% rH = 16.8 L/24h (power consumption: 440 W) at 10°C / 70% rH = 7.2 L/24h (power consumption 390 W) air circulation volume: 830 m³/h condensate tank: No integrated tank. The water is supplied via a hose connection directly into the drain or into a bucket. Compressor: rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 40 kg Operating setting: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Read more less