Complete clothesline system for self-assembly with sturdy T-telescopes made of rust-proof metal. Ideal as a second hanger or anywhere where a wall-to-wall solution is not possible due to space constraints. This system requires a stable, non-insulated supporting wall, ideally made of concrete or brick. White plasticized wire rope and chrome-plated rope tensioner for optimal load-bearing capacity. 1 m (8 lanes) with 20 m rope - for a width of max. 2.36 m The set consists of - 2 x T-beams made of sturdy metal with widened mounting plate for ideal stability, length 1 m. The first line is 10 cm away from the wall, then 12.5 cm away - 16 Dryfix castors, color selectable black, yellow, blue - 1 rope tensioner - plasticized wire rope white - 4 dowels and screws for wall mounting In this package the rollers are pre-mounted on the support rails. Ideal mounting height as main slopes approx. 1.85-1.95m (to avoid injuries, install above head height), or as wide secondary slopes also popular at hip height. Technical data Material: galvanized metal, rustproof Dimensions base: 18 x 18 cm, 4 holes (10 mm diameter) Length from wall Total: 100 cm Distance of holes from wall: 10 / 22.5 / 35 / 47.5 / 60 / 72.5 / 85 / 97.5 cm Can be combined with all systems from Dryfix, Krüger, Lübra and Roth-Kippe.  

Read more less

Complete clothesline system for self-assembly with sturdy T-telescopes made of rust-proof metal. Ideal as a second hanger or anywhere where a wall-to-wall solution is not possible due to space constraints. This system requires a stable, non-insulated support wall, ideally made of concrete or brick. The supports extend 60 cm into the room and have space for 5 lines. White plasticized wire rope and chrome-plated rope tensioner for optimal load capacity. The set consists of • 2 x T-beams made of sturdy metal, length 60 m. The first line is 14.2cm away from the wall, then 10 cm away • 10 Dryfix castors, color selectable black, yellow, blue • 1 rope tensioner • plasticized wire rope white 10m • Dowels and screws for wall mounting In this package the rollers are pre-mounted on the support rails. Ideal mounting height As a junior line (additional hanging) at a comfortable working height (approx. 1m), or as a main hanging at approx. 1.85m height

Read more less

Complete wall-to-wall clothesline system made of rust-proof aluminum rails for self-assembly. Affordable, stable design with Dryfix angle rails and pre-assembled rollers. The screws/dowels required for assembly can be ordered free of charge. White plasticized wire rope and chrome-plated rope tensioner for optimal load-bearing capacity. 0.95 m wide (7 lanes) with 20 m rope (line length max. 2.70 m) 30 m rope (line length max. 4.10 m) 40 m rope (line length max. 5.50 m) 50 m rope (line length max. 7.00 m) 1.15 m wide (8 lanes) with 20 m rope (line length max. 2.30 m) 30 m rope (line length max. 3.60 m) 40 m rope (line length max. 4.85 m) 50 m rope (line length max. 6.10 m) Complete wall-to-wall clothesline system for self-assembly. The set consists of: - 2 x support rails made of sturdy aluminum, perforated for wall mounting - Gliding rollers Dryfix black (15 cm distance between the lines) - 1 rope tensioner - plasticized wire rope white - Order free of charge on request: dowels and screws for wall mounting To calculate the correct rope length, calculate (Room length x number of tracks) + (1 x rail width) + approx. 10 cm for pulling the end of the rope into the rope tensioner. In this package the rollers are pre-mounted on the support rails. Clothesline systems over 1m in length are always shipped by courier.  Technical data Weight Dryfix Alu complete 1.45m wide with 30m rope 2990 gr. with 40m rope 3259 gr. with 50m rope 3500 gr.  

Read more less

Dryfix Vario Metal clothesline system, 15 cm line spacing Complete wall-to-wall clothesline system for self-assembly, can be combined with wall or ceiling supports and expanded to a wall-to-ceiling or ceiling-to-ceiling system. Pre-assembled rollers. The screws/dowels required for assembly can be ordered free of charge on request. White plasticized wire rope and chrome-plated rope tensioner for optimal load-bearing capacity. 0.78 m wide (6 lanes) with 20 m rope (line length max. 3.20 m) 30 m rope (line length max. 4.80 m) 40 m rope (line length max. 6.50 m) 50 m rope (line length max. 8.20 m) 1.08 m wide (8 lanes) with 20 m rope (line length max. 2.35 m) 30 m rope (line length max. 3.60 m) 40 m rope (line length max. 4.85 m) 50 m rope (line length max. 6.10 m) 1.23 m wide (9 lanes) with 20 m rope (line length max. 2.05 m) 30 m rope (line length max. 3.15 m) 40 m rope (line length max. 4.25 m) 50 m rope (line length max. 5.35 m) 1.53 m wide (11 lanes) with 30 m rope (line length max. 2.55 m) 40 m rope (line length max. 3.45 m) 50 m rope (line length max. 4.35 m) 70 m rope (line length max. 6.20 m) 1.83 m wide (13 lanes) with 30 m rope (line length max. 2.15 m) 40 m rope (line length max. 2.90 m) 50 m rope (line length max. 3.65 m) 70 m rope (line length max. 5.20 m) 2.28 m wide (16 lanes) with 30 m rope (line length max. 1.70 m) 40 m rope (line length max. 2.35 m) 50 m rope (line length max. 2.95 m) 70 m rope (line length max. 4.20 m) Can be combined with all wall or ceiling supports from Dryfix, Krüger, Lübra. Up to 1.53m rail length, two supports per side are sufficient, above this we recommend 3 supports per side due to the strong cable tension. The set consists of: - 2 x connecting rails made of sturdy metal (4mm thick), perforated for wall mounting - Dryfix rollers (15 cm distance between the lines), color selectable black, yellow, blue - 1 rope tensioner - plasticized wire rope white - on request: free dowels and screws for wall mounting To calculate the correct rope length, calculate (Room length x number of tracks) + (1 x rail width) + approx. 10 cm for pulling the rope end into the rope tensioner. In this package the rollers are pre-mounted on the support rails. Installation option: If you would like to have the system professionally installed at your location, please ask for a quote (depending on distance and any other items that may need to be installed). Shipping costs for 1 set Fr. 14.- (due to the size of the package we only send these laundry hangers by courier). Technical data Dryfix Vario Metal complete 0.78m with 20m rope: 6793g with 30m rope: 7013g with 40m rope: 7282g with 50m rope: 7523g 1.08m with 20m rope: 8019g with 30m rope: 8239g with 40m rope: 8508g with 50m rope: 8749g with 70m rope: 9257g 1.53m with 30m rope: 11579g with 40m rope: 11848g with 50m rope: 12089g with 70m rope: 12597g 2.28m with 30m rope: 14093g with 40m rope: 14362g with 50m rope: 14603g with 70m rope: 15111g

Read more less

Large, sturdy clothes airer with plenty of space on two large and one smaller level, total 22m drying rods. With a width of 162cm, it is one of the largest folding clothes airers on the market. Bargains while stocks last. The Dryfix Luxor clothes rack is lightweight but still sturdy. It stands well even when loaded. It can be used straight away without assembly, is quick to set up and quickly folded up again to save space. Material: metal tubes, plastic connectors. warranty 2 years Shipping costs for 1 piece: CHF 18.- (due to the size of the package, we only send these laundry hangers by courier). Technical data width 162 cm total height 116 cm depth 53 cm

Read more less

The 200LS radiant heater is an inexpensive but high-quality infrared heater. It can be attached to the ceiling using the chain provided, similar to a lampshade, and thus provides warmth from above. It is ideal if, for example, a cozy table on the balcony or workstations in the basement, workshop or production halls need to be heated in specific areas. The 200LS has protection class IP24. This means that it is protected against splash water and is therefore suitable for both indoor and protected outdoor areas. The infrared heat is generated very quickly and is transmitted through heat waves, which keep people and objects warm. The heat is immediately noticeable even in windy and draughty conditions and is distributed downwards at an angle of 150°, which means that with a normal room height of around 2.5m, this means a radius of around 2-3 meters. Heater: The spotlight has 2 heating tubes of 1000W each, which can be switched on individually or together. The heating intensity can be set to 1000W or 2000W by pressing a button on the device itself or using the remote control included in the delivery. During operation, the heating tubes emit not only heat but also a bright light, which also provides sufficient light for the heated zone. LED light: The 200LS also has an LED lamp that can be switched on independently of the heating mode. It emits a subtle white light downwards. The luminosity of the heating tubes is stronger than that of the LED light, so the lamp is particularly useful when no heating is being used. The device is made almost entirely of metal and impresses with its very robust workmanship. Features & advantages over other heaters: • Equipped with two individual heating tubes • IP24 - therefore suitable for indoor and outdoor use • Heating power selectable 1000 watts or 2000 watts • Integrated, separately switchable LED lamp as a light source even without heating • High-quality workmanship, mostly made of metal • Includes remote control for selecting the heating level and for switching the LED light on/off. • Heat transfer without a fan using infrared technology, provides warmth even in drafts. • Silent operation • Compliance with WEEE standards • “GS” tested and of course with CE and EMC conformity Examples of use: For keeping warm the workplace, terraces, balconies, winter gardens, restaurants, tents, pavilions, workshops, agriculture, garages, warehouses, cellars, sheds, gardens and for use at work and for hobbies etc. 2-year warranty Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, other shipping options can be found in the shopping cart) Technical data Voltage: 220V-240V / 50Hz (normal household socket) Max. consumption: 2000 W Heating levels: 2 (1000 W / 2000 W) Dimensions (H/W/D): 265 x 430 x 430 mm Protection class: IP24 (protected against foreign bodies >12.5 mm and against splash water) Weight: 3.5 kg

Read more less

The 210S radiant heater is a powerful infrared heater with a stylish industrial look. It can be attached to the ceiling using the chain provided, similar to a lampshade, and thus provides warmth from above. It is ideal if, for example, a cozy table on the balcony or workstations in the basement, workshop or production halls need to be heated in specific areas. The heater has protection class IP54 - that means protection against splash water - and is therefore also suitable for outdoor use. The infrared heat is generated very quickly and is transmitted through heat waves, which keep people and objects warm. The heat is immediately noticeable, even in windy or draughty conditions, and is distributed downwards at an angle of 150°, which means that with a normal room height of around 2.5m, this means a radius of around 2-3 meters. Heater: The 210S is equipped with two powerful carbon heating tubes, which have a significantly lower glare effect than conventional heating tubes. The heating output can be selected in three levels: 900W / 1200W / 2100W. The heating intensity can be adjusted by pressing a button on the device itself, but also using the remote control included in delivery. The device is made almost entirely of metal and impresses with its very robust workmanship. Features & advantages over other heaters : • Equipped with two individual heating tubes • IP54 - suitable for indoor and outdoor use • Three heat settings 900 / 1200 / 2100 W (fits into normal household socket) • High-quality workmanship, mostly made of metal • Incl. remote control for selecting the heating level and for switching on/off • Heat transfer without a fan using infrared technology, provides warmth even in drafts. • Silent operation • Compliance with WEEE standards • “GS” tested and of course with CE and EMC conformity Examples of use: For keeping warm the workplace, terraces, balconies, winter gardens, restaurants, tents, pavilions, workshops, agriculture, garages, warehouses, cellars, sheds, gardens and for use at work and for hobbies etc. 2-year warranty Technical data Voltage: 220V-240V / 50Hz (normal household socket) Max. consumption: 2100 W Heating levels: 3 (900 W / 1200 W / 2000 W) Heating tubes: 2 carbon heating tubes Housing: metal, painted light grey Dimensions (H/W/D): 310 x 475 x 475 mm Protection class: IP54 (protected against dust in harmful quantities and against splash water) Weight: 3.5 kg

Read more less

This powerful heater (1200-2400 W) is ideal for use wherever limited areas need to be heated quickly. It is therefore ideal for seating areas, work areas, verandas, conservatories, but also for quickly drying out buildings. The delivery includes both the large tripod and a wall bracket. The 240GT is technically state-of-the-art. It was developed using proven know-how from previous models and supplemented with the latest technology. The "golden tubes" used warm up in a matter of seconds and provide good heat deep into the skin. The golden tubes also darken after a few seconds, which has a much less impact on the ambient light than conventional infrared heaters. Complete scope of delivery for stand installation and wall mounting: The tripod consists of a solid metal base and a 3-part screwed tube, with which the desired height can be selected between approx. 0.60m, 1.25m and 1.94m. In addition, the angle of inclination of the radiator head is adjustable so that the heat can be optimally directed to the desired zone. Wall mounting is also possible. The corresponding bracket is also included in the delivery. Easy to use: The heater can be controlled either on the heating head itself or using the remote control provided. The desired heating output is selected by pressing a button or using the remote control (included in delivery): 1000/2000W. Features of this infrared heater: ? Two "Golden Tube heating tubes", which are currently among the highest quality and most powerful on the market ? Selectable heating power of 1200W or 2400W (each tube has 1200W heating power, so one or both tubes are switched on) ? High-quality and robust base made of stainless steel ? Pivoting heating head for precise alignment to the zone to be heated ? Remote control or direct operation on the heating head itself ? Silent heat transfer without air movement, the heating beam is insensitive to wind and weather. ? Protection class IP55, i.e. protected against dust in damaging quantities and against water jets from any angle ? Compliance with WEEE standards ? “GS” tested and compliant with CE and EMC regulations Important: ? The spotlight is suitable for wall and floor mounting. However, it must not be mounted on the ceiling ? Plug: the device is equipped with a T23 plug and requires at least 13 amps. The appropriate socket has square poles (not round). These sockets are usually available in laundry rooms, new buildings and temporary construction sites. The plug does not fit into conventional 10A household sockets. Therefore, always check before purchasing whether you have a suitable socket available. Also note the photo in our image gallery where the plug is shown. ? Protection class IP55: The heater head itself is IP55 protected, which means it is protected against water jets. It can therefore be used outdoors. The plug itself must be protected from moisture. The included connection cable is approx. 1.5m long. ? Service life: The heating tubes have an expected service life of up to 5000 operating hours, which corresponds to 5-10 years depending on how often they are used. Due to the high level of protection against water jets, the internal components are very well sealed. Replacing defective tubes is theoretically possible, but very time-consuming. The water protection is also lost when replacing them. If the heater has reached the end of its service life, it is therefore advisable to replace the entire head. Scope of delivery: ? Radiant heater ? Tripod ? Wall mount ? Remote control (2 x AAA batteries not included) Examples of use for radiant heaters: Heating of: terraces, seating areas, balconies, marquees, workplaces, construction sites, workshops, agriculture, garages, warehouses, cellars, sheds, gardens and for use at work and for hobbies etc. 2-year warranty Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, other shipping options can be found in the shopping cart) (akd) Technical data Voltage: 220V-240V / 50Hz Power consumption: max. 2400 W Fuse min.: 13 A Protection class heating head: IP55 Heating head dimensions (H/W/D): 25 x 70 x 23 cm Dimensions with tripod (H/W/D): max. 230 cm x 70 cm x 46 cm Weight: 15 kg (complete including tripod), 3.7 kg (heating head only) Operating setting: remote control or directly on the device Application area: up to max. 20m2 indoor area or approx. 10m2 outdoor area Swiss plug: Yes / T23 Guarantee: 2 years

Read more less

Powerful dehumidifier/construction dryer with metal housing. For powerful drying of larger rooms and water damage. Characteristics • Dehumidification capacity of up to 50 liters / day • Electric hygrostat (LED) for regulating and setting the desired humidity • Function for continuous operation/continuous dehumidification • Electricity consumption meter (kWh) • Operating hour counter • Automatic memory function, saves the settings for automatic operation after a power failure • Clear display including actual humidity, target humidity and status overview • Equipped with a highly efficient rotary compressor. This compressor is one of the most powerful compressors on the market • Automatic professional defrost function • Humidity control of seamless 1% steps between 30% to 90% (plus continuous operation function) • Removable condensate tank • Possibility of connecting a hose for continuous drainage of the condensate • Powder-coated metal housing/metal frame • Very easy mobility thanks to transport handles and large wheels for safe travel over steps and uneven ground • Operating warning light / defrost light • No separate or renewed coolant is required (closed circuit) • Cleanable air filter grille • Environmentally friendly refrigerant R290 • CFC free and compliance with WEEE standards notes Not suitable for use in very cold rooms, as the cooling element can freeze up if used continuously below 8°C. Unlike similar models on the market, the ventilation also stops when the desired target humidity is reached, which means less power consumption with the same performance. dehumidification performance Overview of the approximate dehumidification quantities in liters per day at different room temperatures and humidity: 30 °C / 80% RH = approx. 50 L (60% RH = approx. 25 L) 20 °C / 80% RH = approx. 25 L (60% RH = approx. 14 L) 15 °C / 80% RH = approx. 18 L (60% RH = approx. 10 L) 10 °C / 80% RH = approx. 10 L (60% RH = approx. 7 L) (RH=relative humidity) (akd) Tension 220-240 V / 50 Hz power consumption max. 820 (3.7 A) / 700 W (3.2 A) at 20 °C / 60% RH sound pressure level 57 dB(A) (manufacturer information) dehumidification performance 50 liters/day (30 °C / 80% RH) amount of recirculated air 350 m³/h (built-in) condensate tank approx. 5.5 liters (direct hose connection possible) compressor rotary compressor refrigerant R290 (230gr.) Dimensions (H x W x D) 925 x 605 x 462 mm Weight 31 kg cessation of operations Digital ambient temperature 8 °C ~ 32 °C application area min. 11 m² to max. 120 m² Swiss plug Yes hose connection Yes guarantee 2 years

Read more less

This infrared heating panel / heating wall produces very energy-saving heating thanks to the latest technology. It can be used free-standing or mounted on a wall or ceiling. Infrared heating panels produce a pleasant heat wave energy (deep heat), which is mostly absorbed by the walls and objects in the room. Only a fraction (approx. 15%) of this is not absorbed and is reflected back. The heat wave energy absorbed by ceilings, walls, floors and objects is then released back into the environment in the form of heating energy, creating a pleasant warm climate with extremely low electricity consumption compared to conventional forms of heating. This infrared heater is available in two different strengths: with 350W or 900W heating power (see the corresponding offer in our shop). In contrast to conventional heaters or fan heaters, infrared heaters can be used to supply heat to specific areas without having to heat the rest of the room. For example, to heat a workplace, the seating area in the living room, etc. The heat can be felt after just a few minutes. This infrared heating panel is also ideal for drying damp or wet walls, ceilings or objects, because around 85% of the heat is released directly into the wall, ceiling or object, without prior convection loss, and this means that the moisture is pushed out many times faster than with other methods. WDH® is a quality product or a brand that is almost exclusively available from specialist retailers. WDH® air conditioning units have made an excellent name for themselves in recent years for high-quality devices. Quality standards include, for example: durability, compliance with the specified performance, of course with CE conformity, recyclable materials, etc. We are the general representative for WDH units in Switzerland and generally stock the products from stock. With us you get a branded product and, of course, comprehensive customer service, even after the warranty period has expired. Features & Benefits: ? Powerful IR heating plate with at least 350 watts ? High-quality stainless steel heating plate with aluminum frame ? Two aluminum feet (for freestanding) and a mounting kit (for wall mounting) are included in delivery ? Heat transfer without air movement and without any oxygen consumption ? Absolutely silent operation ? Very low consumption costs compared to other forms of heating ? Automatic overheating protection ? Service promise/collection guarantee: In the unlikely event of a complaint, the device will be picked up from you by UPS and checked/repaired in our own workshop ? No maintenance required and easy to clean (just wipe down). ? Very slim design and lightweight construction. In addition, very attractive exterior ? High mobility (plug & play) and easy quick assembly. Miscellaneous: - This infrared heating plate is passively controlled. This means that you simply plug it into the socket and the heating plate works independently. This means that the heating is either on or off. Temperature or time control is not possible or would have to be supplemented with a separate timer or temperature controller if required. In extreme cases, the heating plate of the device can reach temperatures of up to 125°C, but the automatically controlled heating plate temperature is on average 80 – 105°C. It is recommended to ensure that small children or animals cannot come into contact with the heating plate. Examples of use: Room heating: Ideal for supporting and energy-saving room heating. Often sufficient as the only heat source for rooms of up to 8 m2 Drying: Ideal for faster drying of walls, ceilings, floors and objects. Economical heating/drying of basement rooms. Damage repair: After flooding or after damage caused by fire-fighting water. These devices are ideal for supporting the drying process. 2-year warranty Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, other shipping options can be found in the shopping cart) (akd) Technical data Voltage: 230V / 50Hz Power consumption: max. 475W Wavelength: 8 – 15 µm = mid infrared, IR-C waves Dimensions without feet (H/W/D): 60 x 60 x 3 cm Weight: 3.8 Kg Operating setting: Passive control (i.e. plug plugged in ON, unplugged OFF) Application area: up to max. 8m² Swiss plug: Yes Warranty: 2 years

Read more less

The AB-10 is a powerful, versatile fan made of robust plastic. The radial flywheel pushes the air drawn in from the side forwards with a lot of pressure. A hose distributor attachment can optionally be attached to the air outlet side. possible uses The fans can be used in a variety of ways, for example: • for commercial use on construction sites to accelerate building drying • for drying water damage • for removing fumes • as a carpet dryer 3 different positions The fans can be installed in three positions: horizontal - blowing straight forward: this position pushes the air horizontally across the floor and drives moisture in carpets or from underlays into the room air. This speeds up the drying of the underlay massively. 45° inclined - blowing out diagonally upwards: For example, if damp walls or hanging objects need to be dried. Tilted 90° - blowing out upwards: for drying ceilings or for more even air distribution in rooms without stirring up dust. Characteristics • Maximum air volume of 4500 m³/h • Three fan speeds (1 = 520W, 2 = 550 Watt, 3 = 620 Watt) • Impact-resistant housing made of robust “Linear Rotational Plastic” (rotated plastic) • Strong high-performance single-phase motor with starting and working capacitor (PSC motor) • Operation and air flow possible in three different positions (air angle positions 0°, 45°, 90°) • Easy to carry and transport thanks to its compact design and handy carrying handle • The device is ready for use immediately (no installation or assembly required) • No adjustments in case of power failure (device continues where it was interrupted) • Stackable (several identical devices can be stacked on top of each other for operation and storage)   continuous operation This fan is designed for high air circulation, even over long periods of time. However, to avoid excessive wear, it should be switched off for 1-2 hours after 48 hours of continuous operation so that the motor can cool down completely.     Technical data Tension 230V ~ 50Hz Max. power consumption 880 W (3.9 A) Max. air circulation 4500 m 3 /h fan speeds 3 (3 = 620W, 2 = 550W, 1 = 520W) Max. speed 1300 rpm dimensions (H x W x D) 51 x 43 x 48 cm Weight 12.6 kg cessation of operations rotary switch Swiss plug Yes, 3m cable guarantee 2 years

Read more less

The industrial air purifier WDH-AF500B is a robustly built dust eater with a HEPA filter for industrial high-performance tasks as well as for cleaning the air on construction sites, in carpentry workshops or production halls with heavily polluted indoor air. It has a respectable air flow rate of approx. 850 m3/h and thus protects employees from harmful dust, spores, asbestos and other particles in the air. The ventilation intensity can be continuously adjusted using the rotary control. Even at the highest level, the operating noise is within a perfectly acceptable range, which also allows normal communication. The housing is made of almost indestructible special plastic and has a carrying handle. An air hose can be connected during operation and/or after operation. The coarse dust filter first cleans the air of larger particles (purity rate 90%). The HEPA filter then cleans the air almost completely with each draft (purity rate of over 99.9%). The scope of delivery includes a HEPA filter (H13) and a coarse dust filter (G4) . An optional activated carbon filter is also available to remove odors and vapors. Features air purifier: • Easy operation with stepless rotary control • Warning light for clogged filters, which reminds you to change them • Housing made of robust special plastic, easy to clean • Possibility for hose connection in the intake area (suitable hose diameter 30 cm) and in the exhaust area (suitable hose diameter 20 cm) • Low power consumption of 225 watts with maximum air circulation of approx. 850 m3/h • No adjustments in the event of a power failure (device continues where it was interrupted) • Carrying handle for easy transport • Stackable: up to four devices can be stacked on top of each other Properties Filter: • HEPA filter (H13) / included in delivery : purity rate of 99.95%. One of the best filters ever, this branded filter catches and filters particles up to 0.0003 mm in size. These include pollen, germs, mold spores and fine dust. • Coarse dust filter (G4) / included in delivery: The coarse dust filter (G4) removes all larger particles (> 10 ?m) with a purity rate of over 90%. When used as a pre-filter for the HEPA filter, it ensures a longer service life of the HEPA filter. • Activated carbon filter / not included: Absorbs and purifies many types of smoke and odors and also helps break down toxic fumes, gases and solvents. Combination options filter: One or both of these filters can be installed in the lid of the air purifier, or the space can be left empty. • coarse dust • Activated carbon The HEPA filter can either be installed in the main part of the cleaner or the space can be left empty. The filters are consumables and cannot be cleaned. Depending on the level of air pollution, they must be replaced regularly. The device has a 7m long connection cable with a Swiss plug (220-240V / normal household socket). warranty 2 years Shipping costs for 1 item: from Fr. 18.- (Based on B-Post, other shipping options can be found in the shopping cart) Technical data Voltage: 220 – 240V / 50Hz Max. consumption: 225W (1.0 A) Air circulation: 850 m3/h Noise: min. 45 dB(A) max. 65 dB(A) diameter Hose connections: supply air 30 cm exhaust air 20 cm Dimensions (H x W x D): 635 x 408 x 625 mm Weight: 17.5 kg

Read more less

5000 mg/h (5 g/h) ozone output This professional ozone generator is ideal for neutralizing even extremely strong odors (e.g. burning smell, decay smell, toilet smell).   Ozone tubes are the latest technology in ozone generation with a long service life. WDH® is a quality product or a brand that is almost exclusively available through specialist retailers. WDH® air conditioning units have made an excellent name for themselves in recent years for high-quality devices. Quality standards include, for example: durability, compliance with the specified performance, CFC-free, of course with CE conformity, recyclable materials, etc.   Characteristics • Ozone emissions of 5000 mg/h (5 g/h) • Equipped with very durable ozone tubes • Continuous operation possible • Timer function to select the automatic operating time between 0 – 90 minutes • Stainless steel frame with carrying handle • Low power consumption of only 130 watts • Clear control panel • Suitable for wall mounting Important safety instructions The device may only be operated by specialists who are well versed in the effects and use of ozone or who have acquired this knowledge through training. The legal guidelines must be observed when operating the device. In higher concentrations (over 0.1 ppm or 0.2 mg ozone/m³), ozone is a poisonous gas and oxidizing agent and is classified as dangerous and harmful to health! Precautions must be taken to prevent the uncontrolled release of ozone. Ozone attacks natural rubber, caoutchouc and plants and endangers people and animals. We only recommend this device for neutralizing odors that are not caused by harmful organisms. You can also rent this device from us. Technical data   Tension 220V-240V / 50Hz power consumption 130 W (0.6 A) ozone performance (optimal) 5000 mg/h (5 g/h) Max. ozone concentration 15-25 mg/l water resistance IPx0 Dimensions (H x W x D) 59 x 38 x 22 cm Weight 12.7 kg application area 5°C - 40°C / max. 75% rH Swiss plug Yes guarantee 2 years

Read more less

High-quality floor fan made of robust metal and the rotors made of aluminum. The fan head can be swiveled so that the air flow can be tilted in any desired direction. The device has three speed settings, a long-lasting high-performance motor and a practical carrying handle. It impresses with its good price-performance ratio and its easy handling. Ideal for supporting water damage drying or for air circulation in any room. Due to its high reliability, the fan is also suitable for unattended continuous operation. For example, the FE50X is also used in the Technorama, where it is in operation every day. Characteristics · Large fan head with plenty of air circulation · Three fan speeds, easily adjustable via rotary switch on the back · Blowing direction of the fan is horizontally infinitely adjustable · Made entirely of robust metal · Rotor blades made of 100% aluminum · Powerful, durable high-performance motor with copper coil · Handy, easy to transport thanks to carrying handle · Long power cable, approx. 2.40m length, Swiss plug · No assembly required, the fan is ready for use · Comparatively quiet operation · Robust motor housing · RoHs and CE compliant   Technical data  power consumption 120 watts max. rotor diameter 50 cm airflow Up to 8500m³/h, wide distribution speed levels Three cable length approx. 2.40m Connection Fixed adapter suitable for Swiss sockets Dimensions (W x H x D) 61 x 62 x 26 cm Weight 6.5kg scope of delivery plug-in fan, no assembly required guarantee 2 years  

Read more less

High-quality, large basket fan made of robust metal and aluminum rotors. The fan head can be swiveled so that the air flow can be tilted in any desired direction. The device has three speed settings, a long-lasting high-performance motor and a rack with 2 wheels for easy mobility. It impresses with its good price-performance ratio and its easy handling. Ideal for supporting water damage drying or for air circulation in any room. Due to its high reliability, the fan is also suitable for unattended continuous operation. Characteristics • Extra large fan head (Ø 60cm = 24“) with up to 10500 m³/h air circulation • Three fan speeds, easily adjustable via rotary switch on the back • Blowing direction of the fan is horizontally infinitely adjustable • Made entirely of robust metal • Rotor blades made of 100% aluminum • Powerful, durable high-performance motor with copper coil • Handy and easy to transport with rack and 2 wheels • Long power cable, approx. 2.20m length, Swiss plug • RoHs and CE compliant  Technical data  power consumption 120 watts max. rotor diameter 60 cm / 24 inches airflow Up to 10500m³/h speed levels Three cable length approx. 2.20m Connection Swiss plug 230V 3-pin (normal household socket) Dimensions (W x H x D) 80 x 71 x 38.5 cm operating noise 64 dB(A) at 2.5m distance Weight 6.5kg  

Read more less

The H600A cleans the air of fine dust, pollen, bacteria and viruses quickly and with a high purity rate. The powerful ventilation is a great advantage. The more often the room volume passes through the device, the cleaner it becomes. While particles such as fine dust, but also viruses and bacteria are practically 100% filtered out of the room air every time the device passes through thanks to the HEPA H13 filter, odors are gradually reduced until they are completely eliminated after several passes through. Features, Features & Benefits prefilter The pre-filter (filter net) removes all larger particles such as coarse dust, hair and lint and ensures a longer service life of the other filters. HEPA filter (H13) One of the best filters ever, this branded filter of filter class “H13” catches and filters particles up to 0.0003mm in size. These include pollen, germs, mold spores and dust with a purity rate of 99.97% Pro activated carbon filter Absorbs and purifies many types of smoke and odors (e.g. cigarette smoke) and also helps break down toxic fumes, gases and solvents (e.g. formaldehyde, benzene, ammonia, sulfur, etc.). EPA & activated carbon filter combination (E11) A filter that combines the two quality filters mentioned above to achieve even better results. It is installed in the device upstream of the (more expensive) HEPA H13 and activated carbon filters and significantly extends their service life. anion exchangers Produces approximately 3 million anions/ions per second, which proactively combat smoke, odors, bacteria, viruses and other dirt particles in the room. air sensor operation (automatic mode) Automatically measures the air quality. If the air quality is very good, the device automatically switches to the lowest operating level. If the result is the opposite and the air quality is poor or bad, the operating level automatically adjusts to a higher level. auto timer With the timer you can specify/select a switch-on time and remaining running time of the device of up to 8 hours. touch panel With this modern control panel, you can make your settings quickly and precisely. 5 speed levels Five options to choose from to suit your personal needs. night operation Dimmed mode and very quiet operation. LED display: Modern and very clear LED display, so you always have a quick overview of all settings. The current air quality is also displayed. Both the pollution levels of odors/vapours (VOC display) and the flying particles of various sizes (PM display) can be queried. The smallest unit displayed is particles smaller than 1 micrometer per cubic meter of air (display = PM 1.0). Particle size steps: 1.0 / 2.5 / 10.0). PM2.5 is also known as fine dust (2.5 micrometers are a 400th of a millimeter). A 3-color display makes it easier to quickly identify the approximate air condition. filter change indicator This will show you when it is necessary to replace one or more filters. Stable housing Very robust and with a high-quality and attractive design. parental controls Suitable to avoid accidental changes to the settings. Miscellaneous The device works with one (1) HEPA filter plus one (1) activated carbon filter plus one (1) filter combination. Depending on the application, the filters last up to one year. WDH ® ​​is a quality product or a brand that is almost exclusively available from specialist retailers. WDH ® ​​air conditioning units have made an excellent name for themselves in recent years for high-quality air purifiers. Quality standards include, for example: durability, compliance with the specified performance, of course with CE conformity, recyclable materials, etc. usage examples Healthier climate: Create a healthier environment and thereby more noticeable well-being. Odor removal & tobacco smoke elimination: Not only is the unpleasant smoke from cigarettes, pipes, cigars, etc. quickly absorbed and neutralized, but the nicotine also has less chance of settling and turning white into yellow. Fine dust and exhaust gas removal: Protects against many toxic substances in the air to which you are particularly exposed in large cities and on highways. Asthmatics & allergy sufferers: Particle sizes < 5 µm are considered lung-permeable and < 2-3 µm are considered alveolar-permeable. Allergy sufferers and sensitive people can breathe freely again thanks to the exceptionally high filtration rate of fine dust, mold, bacteria, mite allergens, pollen and many other pathogens. AIRCENTER Remark We therefore recommend that you read the operating instructions before use in order to be able to make the most of the wide range of functions. After just a few minutes, everything will be clear and you will have a lot of fun with the device. Regarding cleaning effect against the corona virus Coronaviruses have a diameter of approximately 60 - 160 nm (60 nm = 0.00006 mm). HEPA filters of category H13 (like in this device) clean particles up to 0.0003 mm in size. The virus is therefore smaller than the purity rate of the filter. But: viruses do not fly individually in the air, but are always enclosed in larger droplets (so-called aerosols). In human breath, the smallest droplets have a size of approx. 1 µm = 0.001 mm (when coughing: 10 µm = 0.01mm). The H13 filter therefore catches the aerosols and also cleans the air of COVID19 viruses. The integrated ionizer can also significantly enrich the air with anions. Anions encapsulate viruses in the air and thereby neutralize them. The combination of H13 and ionizer means that the H600A can significantly reduce the concentration of viruses in the air. However, the device is very effective and recommendable for risk reduction, e.g. in waiting rooms, classrooms, offices or in the catering industry. Technical data Tension 220 - 240V / 50Hz Max. power consumption 145 W (0.7 A) air circulation Level 1: 90 m³/h Level 2: 225 m³/h Level 3: 380 m³/h Level 4: 475 m³/h Level 5: 540 m³/h operating noise  Night mode: 40 dB(A) Level 1: 42 dB(A) Level 2: 53 dB(A) Level 3: 59 dB(A) Level 4: 63 dB(A) Level 5: 66 dB(A) Recommended room size max. 70m² (or 170 m³) dimensions (H/W/D) 850 x 450 x 420 mm Weight 22 kg guarantee 2 years

Read more less

This powerful electric heater with a 400V/16A connection impresses with its good price-performance ratio and its ease of use. The device is very effective and is made almost entirely of metal, making it extremely robust. It is therefore ideal for commercial and demanding use. There is a socket for a connection cable on the device itself. You can find suitable connection cables in our accessories. WDH® is a quality product or a brand that is almost exclusively available through specialist retailers. Quality standards include: durability, compliance with the specified performance, tested by TÜV “GS”, of course with CE conformity, recyclable materials, etc. The WDH 9kW series is optimized according to the latest technical knowledge. Features & advantages over other electric heaters: ? Heating power adjustable up to 9000 watts (9 kW) ? Thermostat for regulating and setting the desired temperature ? Two heat levels selectable (1 = 4500 watts 2 = 9000) ? Pure fan operation also possible without heating function ? Also suitable for continuous operation ? Overheating protection and protected against splash water and small foreign objects (IP24) ? Stepless temperature control (0 ~ 40° C) ? Integrated protection mechanism against overheating and reset function ? No adjustments in case of power failure (device continues where it was interrupted) ? Very easy mobility thanks to handy carrying handles ? The device is ready for use immediately (no installation or assembly required) ? Low-noise operation ? No oxygen consumption ? Tested by Intertek “GS” and of course with CE conformity and fulfillment of WEEE standards Miscellaneous: - To operate this heater, a five-pole 16 A power connection 380V/415V (50/60Hz) with CEE16A plug is required. - As with all high-voltage fan heaters, heating stops when the set target temperature is reached, while ventilation continues to run to protect against overheating. Examples of use: Temperature regulation: construction sites, workshops, agriculture, apartments, garages, warehouses, cellars, sheds, garden sheds, laundry rooms and for use at work and for hobbies etc. Also ideal as a frost guard Drying: Ideal for faster drying of plaster, screed, etc. (Work can continue or be carried out very quickly) Damp rooms: Ideal for damp cellars, old walls and drying all damp objects Damage repair: After flooding, after damage caused by fire-fighting water or in the event of rot, these devices are ideal for supporting the drying process 2-year warranty Shipping costs for 1 item: from Fr. 12.- (Based on B-Post, other shipping options can be found in the shopping cart) ------------ How much heating power do I need? As a rough rule of thumb, for closed rooms with a normal ceiling height (2.5 m) you need around 1 kW of heating power per 10 m2. This value depends on the insulation and the cold ingress into the room. (akd) Technical data Voltage: 380V - 415V / 50Hz Power consumption: 2 levels 4.5 kW / max. 9 kW Fuse max.: 16 A Room thermostat: 0 - 40 °C Air volume flow: 930 m3/h Protection class: IP24 (Foreign body protection with ø > 12.5 mm + splash protection) Dimensions (H/W/D): 44 x 41 x 33 cm Weight: 9.3 Kg Operating setting: rotary wheel Application area: up to max. 90m2 Plug: CEE 16 A Warranty: 2 years Series: WDH-IFJ03 Special features: No power cable included in delivery, the plug is located directly on the device. Suitable power cables in various lengths can be added in the dropdown menu when ordering.

Read more less

The TG60L is a very reliable, industrial drum blower with a high air flow rate and low power consumption. It is ideal for commercial use, for example in building drying, for supporting water damage drying, but also for agriculture. The power fan is made of sturdy metal and stands well in the rack even when running at full speed. The rack itself has two wheels on one side and two feet. The fan can be lifted and rolled away using practical handles to move it. Thanks to the tubular housing, the axial fan not only spreads the air high and wide but also has a considerable throw distance. The amount of air circulated can be regulated in three stages using the rotary control on the back. Characteristics • Powerful axial fan with up to 5900 m3/h air circulation • Robust metal housing with rack, wheels and handles • Durable high-performance motor, adjustable in three stages • Metal rotor blades • Drum tilt can be rotated 180° • Splash-proof (IP24) • Retains the setting even in case of power failure • Top price/performance ratio Due to its dimensions, this device will always be shipped via courier (regardless of the shipping method chosen at checkout). If you need even more air pressure over a longer distance or want to suck in or discharge the air with a hose, also consider the WM120 model. Technical data   air circulation speed max. max. 5900 m 3 /h 1345 rpm Tension 220 ~ 240V / 50Hz Max. power consumption 260 W (1.2 A) protection class IP24 operating noise Level 1: 1 / 2.5m distance Level 3: 1 / 2.5m distance 76 / 73 dB(A) 80 / 77 dB(A) diameter of the air duct approx. 63 cm Weight 18.8 kg Dimensions (H x W x D) 765 x 765 x 300 mm connection cable approx. 2m + CH plug guarantee 2 years  

Read more less

The WM120 is the "monster version" of the SHT28 axial fan. It has a very powerful air flow of 9600m³ /h and is suitable wherever a lot of supply or exhaust air is required. For example, in agriculture for ventilating livestock sheds, on construction sites, in industrial halls, etc. It is of course also suitable for parties or for ventilating marquees, photo shoots, etc. Measured against the air output, the consumption of just 750W is moderate; a normal 230V socket is sufficient to operate this wind machine. Optionally, the compressed air can be discharged with an air hose (available air hose lengths: 10m and 20m). This professional wind machine is very robust and designed for a long service life. The frame and housing are made of metal. The device has solid, removable metal castors with brakes to prevent the device from recoiling due to the high air pressure. Durable, high-performance motor. The air flow can be adjusted at an angle of 180° (vertical to horizontal). Characteristics • high air circulation of strong pressure in the distance • Swiveling air flow angle of 180° (vertical to horizontal) • Very robust metal housing/metal frame. • Equipped with a strong, durable high-performance motor. • Good mobility thanks to high-quality castors and rack. • Extremely easy to use. • No adjustment in the event of a power failure (device continues where it was interrupted). • The device is ready for use immediately (only the wheels need to be screwed on. If you wish, we can pre-assemble it for you free of charge when you pick it up). • Compliance with WEEE standards. usage examples Ventilation: • Ideal for ventilation or de-ventilation of large rooms • Removal of heat and vapours, e.g. in tunnel construction, mastic asphalt work and on construction sites • Agriculture: Ventilation of livestock sheds • Industry: Wind cooling of machines and trades • Removal of dust and odors Wind generation and others: • In the wind tunnel, when filling hot air balloons or for use on film sets, stage effects or photo shoots, these devices are ideally suited for this    Technical data   Tension 220 -240V / 50Hz power consumption max 1980W starting current (9A) Ø power consumption 750W operation (3.5 A) ventilation levels 1 max. air circulation volume 9600 m³/h speed max 1420 rpm sound pressure level (our measurement) 1m distance 83 dB(A) 2.5m distance 79 dB(A) Ø air duct 65cm Dimensions (H x W x D) 87 x 88 x 67 cm Weight 50 kg operating conditions Temperature: -5° - +40°C Humidity: 0 - 90% RH cessation of operations 2 push buttons ON/OFF protection class IPX0 Electrical protection class I Swiss plug Yes guarantee 2 years

Read more less

A handy dehumidifier with adsorption technology. Adsorption is useful where the room air is cold or where very low humidity levels are to be achieved. The "DS3" is also ideal for quickly drying laundry in cool cellars . In contrast to condensation dehumidifiers (dehumidifiers with compressors), dehumidifiers with adsorption technology have an almost constant dehumidification performance even at cold temperatures. They require practically no lead time from the start of operation until effective dehumidification begins. Because they are designed without a compressor, these dryers are lightweight at just 7.5 kg. Technologically, the device would still extract water from the air even below freezing point, but then the water in the drip tray freezes, so 0.5°C is the limit for use. Adsorption dryers can also be used to dry easily at warmer temperatures, but the power consumption per litre of water extracted is higher in temperate rooms than with dehumidifiers with compressors (condensation dehumidifiers). The intersection point is around 8-10°C, i.e. below this value, adsorption dryers dry more efficiently, above this value condensation dryers. Once the target humidity is reached, the dehumidification stops, while the ventilation continues to run for a few minutes until the device has cooled down sufficiently. Dehumidification and ventilation then pause until the humidity in the room rises above the desired target humidity level again. The ventilation is powerful and can be regulated in 3 stages. This is particularly advantageous when drying laundry and speeds it up considerably. The vertically adjustable outlet slats can also be used to direct the dry air in the desired direction. The wind noise is audible even on the lowest setting, so the DS3 is only partially suitable for very quiet bedrooms. Special function air purification with HEPA filter The DS3 can also be used as an air purifier. A suitable HEPA filter, available from us, can be placed in the air intake area. This filters the air with a purity rate of over 99.9% and removes all flying particles such as pollen, fine dust, spores, viruses and germs from the air. The air purification mode can run together with the dehumidification mode, but also without dehumidification thanks to the pure air circulation level. The filter can be ordered separately.  Features of the DS3 • Dehumidification capacity of up to 9.5 liters per day. • Adsorption technology without compressor and without refrigerant. • Good dehumidification performance even at temperatures as low as 0.5°C. • Significantly larger water bucket (5 liters) than comparable devices, auto-stop when the tank is full including warning light. • Electric hygrostat (LED) for regulating and setting the desired humidity. • Humidity control in 10% steps from approx. 40% to 70% and continuous operation possible. • In addition to the standard mode, there are the following operating modes: Auto mode; Dry mode (Turbo) and Air purification mode* (additional *HEPA filter required). • Timer function for selecting the automatic remaining running time or the start time between 1-24 hours. • Clear display including current humidity display and status overview. • Also suitable for continuous operation/continuous dehumidification. • SmartHome capable (via WLAN socket) + can be controlled via external timer (only possible with a few devices). • Memory function: no adjustments in the event of a power failure (device continues where it was interrupted). • Possibility for direct hose connection for draining the water into a lower drain (suitable hose: 12mm inner diameter). • Absolutely maintenance-free. • Washable, antibacterial air filter. • Modern design and attractive appearance, therefore also very suitable for living spaces. • The device is ready for use immediately (no installation or assembly required). • Comparatively light in weight, easy mobility with side handles. • Compliance with WEEE standards. • TÜV “GS” tested as well as CE and EMC conformity.   scope of delivery The delivery includes the plug-in device and an activated carbon net, which can be inserted in the air intake area and slightly improves the quality of the air during operation. The HEPA filter is optional and not included in the basic delivery.  application examples   • Keeping poorly insulated cellars, garages, boats and caravans dry over the winter • Drying laundry in cold laundry rooms • Drying of herbs and spices       Technical data   Tension 230V / 50Hz power consumption max. 730W sound pressure level (our measurement) Weakest fan level: 1m distance 48 dB(A) 2.5m distance 44 dB(A) Strongest fan speed: 1m distance 55 dB(A) / ideal for drying laundry 2.5m distance 52 dB(A) fan         Weakest fan level air volume approx. 170 m³/h Blow-out speed approx. 4.4 m/sec. Strongest fan level air volume approx. 270 m³/h Blow-out speed approx. 6.5 m/sec. dehumidification performance   max. 9.5 liters per day (at 30°C / 80% RH) max. 9 liters per day at 8°C / 80% RH) condensate tank Approx. 5 liters and direct hose connection (12mm) refrigerant not available/adsorption technology Dimensions (H/W/D) 515 x 360 x 240 cm Weight 7.5 kg ambient temperature 1°C ~ 32°C comparable devices EcoQ 9L Steady application area up to approx. 50 m² Swiss plug Yes guarantee 2 years

Read more less