This powerful electric heater with a 400V/16A connection impresses with its good price-performance ratio and its ease of use. The device is very effective, made almost entirely of metal and is therefore extremely robust. Ideal for commercial and demanding use. There is a socket for a connection cable on the device itself. You can find suitable connection cables in our accessories. Characteristics • Heating power adjustable up to 9000 watts • Thermostat for regulating and setting the desired temperature • Two heat levels selectable (1 = 4500 watts / 2 = 9000 watts) • Pure fan operation also possible without heating function • Also suitable for continuous operation • Overheating protection • Continuous temperature control (5 ~ 35° C) • Integrated protection mechanism against overheating • No adjustments in the event of a power failure (device continues where it was interrupted) • Very easy mobility thanks to handy carrying handles • The device is ready for use immediately (no installation or assembly required) • Quiet operation • No oxygen consumption • CE compliant, 2006/95/EC, 2004/108/EC, EN 60335-1, EN 60335-2-30 • Made in Italy Miscellaneous • To operate this heater, a five-pole 16 A power connection 380V/415V (50/60Hz) with CEE16A plug is required. • As with all high-voltage fan heaters, heating stops when the set target temperature is reached, while ventilation continues to run to protect against overheating. • No power cable included in delivery, the plug is located directly on the device. You can find suitable power cables in various lengths and designs from us. usage examples Temperature regulation: construction sites, workshops, agriculture, apartments, garages, warehouses, cellars, sheds, garden sheds, laundry rooms and for use at work and for hobbies, etc. Drying: Ideal for faster drying of plaster, screed, etc. (work can continue or be applied very quickly) Damp rooms: Ideal for damp cellars, old walls and drying all damp objects Damage repair: After flooding, after damage caused by fire-fighting water or in the event of rot, these devices are ideal for supporting the drying process. How much heat do I need? Our free heat requirement calculator helps you determine the required heating output for your rooms. Click here to go to the online calculator: Calculate heat requirement Technical data   Tension 380V - 415V / 50Hz power consumption 2 levels 4.5 kW / 9 kW Protection max. 16 A room thermostat 5 - 35°C air volume flow 800 m³/h protection class IPX4 Dimensions (H x W x D) 41 x 42 x 32 cm Weight: 9 kg cessation of operations rotary wheel application area up to max. 90m² Plug CEE 16 A guarantee 2 years

Read more less

This mobile split air conditioning system impresses with its powerful cooling performance and the ability to set up the indoor and outdoor units up to 30 m apart. Thanks to its attractive design and quiet operation, it is ideal for use in representative areas, trade fairs and for cooling shops or fitness centers, for example.   functionality   The air conditioning unit absorbs the heat in a cooling system. From there, the heat is transferred to the self-contained cold water/glycol system. It is then pumped through the outdoor unit, where the water is cooled and the heat is dissipated. It can be used in ambient temperatures of up to 45 °C.   The indoor unit is connected to the outdoor unit via two flexible hoses with quick-release fasteners. These hoses are supplied in lengths of 10 m and can be connected to a maximum length of 30 m. This means that the indoor and outdoor units can be positioned up to 30 meters apart and at different heights (up to 10 meters) if required.     Intelligent control reduces energy consumption The indoor unit is equipped with an EC fan. This means that the speed of the fan intelligently adjusts to the effective cooling requirement. This automatic control minimizes energy consumption and avoids unnecessary noise, so you can work in a quiet environment. In addition, the fan of the outdoor unit dynamically adjusts to the outside temperature, ensuring optimal performance regardless of the weather conditions.     remote monitoring possible   A mobile app allows you to monitor and control operations. Managing multiple devices at the same time is also easy.     Advantages at a glance   • Robust metal construction • Highly efficient cooling circuit • Cooling capacity of up to 7 kW • Air flow rate from 800 to 1450 m³/h • Operating temperatures of up to -5°C • Easy installation without prior training • Quick connectors for cooling lines • Indoor unit with continuously adjustable fan speed and adjustable grille • Remote control via app • Up to 30 meters installation distance between indoor and outdoor units • Slim water and glycol hose connection eliminates the need for large air ducts     scope of delivery 1 x indoor unit 1 x outdoor unit 1 x standard hose set 1 x cable for the electrical connection of indoor and outdoor units 1 x power cable (for indoor unit)   Important  The maximum power consumption is 2950 watts. This means that a type 23 socket (16 amps) is required for operation.   Technical data  operating modes cooling, ventilation For rooms up to max. 150m² (depending on heat sources) Cooling capacity max. cooling capacity at 25 °C 7000 W / 23884 BTU/h 6500 W / 22178 BTU/h connection voltage 230 Volt - 50 Hz operating temperature range -5 °C - +45 °C power consumption max. 2950 W protection class indoor / outdoor unit IP44 / IP55 refrigerant R454C (840 gr), GWP 148 cooling medium of the outdoor unit specification of the glycol 10.5 liters of water, 4.5 liters of glycol monopropylene glycol 1.2 sound level at 1m distance 62 dB (A), manufacturer's specification air circulation min. 800 m³/h - max. 1450 m³/h service Touch Screen + App cable included in delivery 10 m Dimensions of indoor unit (H x W x D) 1025 x 880 x 400 mm Dimensions of outdoor unit (H x W x D) 580 x 700 x 250 mm Weight of indoor / outdoor unit 114 kg / 19 kg guarantee 2 years    

Read more less

Neutralizes with very strong 12000 mg/h (12 g/h) ozone output The Super ActivO is ideal for professional odor neutralization. The room size and the desired treatment intensity can be selected with just a few keystrokes. Shortly before operation begins, a clearly visible warning light begins to flash and the display asks the operator to leave the room. The light is also active during the process, providing a visual warning to people. At the end of the treatment, the ActivO automatically starts the reversal process. This means that the air containing ozone is sucked in and converted back into oxygen. This means that the rooms can be safely entered again after a short time. This patented reversal process is unique and significantly reduces danger and waiting time.     Features & Benefits of this Ozone Generator   • Ozone emissions of 12000 mg/h (12 g/h) • Continuous operation possible • Mobile with rack and wheels • Low power consumption of only 350 watts • Clear control panel • Warning light during operation as well as acoustic alarm and warning text when starting. • Automatic process reversal after termination of the application • meets UL, FCC and CSA standards In our experience, the ActivO is excellent for neutralizing odors. However, devices of this type are not effective enough for combating insects and mites (in this case, heating the room to over 60°C is more effective).   Important safety instructions The device may only be operated by specialists who are well versed in the effects and use of ozone or who have acquired this knowledge through training. The legal guidelines must be observed when operating the device. In higher concentrations (over 0.1 ppm or 0.2 mg ozone/m³), ozone is a poisonous gas and oxidizing agent and is classified as dangerous and harmful to health! Precautions must be taken to prevent the uncontrolled release of ozone. Ozone attacks natural rubber, caoutchouc and plants and endangers people and animals. We only recommend this device for neutralizing odors that are not caused by harmful organisms.     Important information on the scope of the guarantee   The ozone blocks contained in this device are partly made of glass and are therefore fragile. Damage to these ozone blocks as a result of careless transport (e.g. when loading/unloading, transporting over stairs, etc.) or handling of the device is not covered by the warranty.   Application video (in English)       Technical data   Tension 220V-240V / 50Hz power consumption 350 W (1.8 A) ozone performance (optimal) 12000 mg/h (12 g/h) amount of recirculated air 450 m3/h water resistance IPx0 Dimensions (H x W x D) 100 x 50 x 40 cm Weight 33 kg application area 5°C - 40°C / max. 95% rH Swiss plug Yes series Ecozone Super Activ0 guarantee 2 years    

Read more less

High-quality dehumidifier for space-saving installation on a wall, ideal for up to 30m² . It is compact, quiet and economical. Its high-quality stainless steel housing combines aesthetic demands with a long service life.   A special feature of this dehumidifier are the slanted slats. These allow the air to be released again at the front of the device without any drafts. This guarantees quiet operation with a noise level of just 46 dB. The air inlet is on the left side via an easily removable air filter, and the dry air outlet is on the front.   The low noise level and draught-free air flow are a great advantage, especially in busy rooms such as changing rooms, wellness areas, smaller fitness rooms, etc. In contrast to the AD110 model, the 110P has an integrated pump with which the condensate can be drained away to a height or distance, for example into a washbasin, into a higher or more distant drain. The new digital control is easy to understand and digitally displays temperature, actual and target humidity as well as the operating hours. Installation is quite simple: a support rail is screwed to the wall and the dryer itself can then simply be hung on it. The rail, screws and dowels are already included in the delivery.     latest technology Thanks to the latest technology, it is highly efficient and economical. The R1234rf refrigerant it contains hardly has any impact on the environment. The "Global Warming Potential (GWP)" is an incredible value of 4, which corresponds to a reduction of 99.5% compared to comparable models of previous generations.     Characteristics Compact and space-saving Incl. wall mount Automatic pump with overflow protection New, environmentally friendly refrigerant stainless steel hood BlueDry technology for particularly energy-saving operation – even at low humidity and temperatures Intelligent e-Dry control operating hour meter Display of target and actual humidity For corporate customers: available on request with robust plastic housing in color of choice and with company logo, quantities and price on request.   dehumidification capacity / power consumption at 30°C / 80% RH = 15 liters/ day / 330 watts at 20°C / 60% RH = 8.5 liters/ day / 236 watts at 15°C / 70% RH = 8 liters/day / 215 watts    Technical data   Tension 230 V / 50 Hz power consumption max. 330W or 236W at 20°C/60% RH operating noise 1 m distance 46 dB(A) (our measurement) dehumidification performance 15 liters/day (30°C / 80% RH) amount of recirculated air 225 m³/h condensate tank integrated condensate pump, no tank hose connection Yes, 3m mounted on the device (12mm inner diameter) refrigerant R1234yf Weight 18.5 kg Dimensions (H x W x D) 49 x 33 x 28 cm cessation of operations Digital ambient temperature 3°C ~ 32°C Plug cable with Swiss plug T12 application area up to 30m² / 70m³ (temperature-controlled rooms) ambient temperature 3°C ~ 32°C operating hour meter Yes protection class IP54 guarantee 2 years

Read more less

The new AD 520 was specially developed for professional use. The extra-lightweight housings are particularly popular on construction sites and when drying out water damage. Thanks to the latest technology, they are economical and can be used in temperatures down to just below freezing. The water is collected in a 7-litre condensate tank as standard, with a float automatically stopping operation when the tank is full. The water can also be drained directly via the hose connection. The condensate hose can be plugged directly onto the water nozzle without a coupling (we recommend a clamp for secure attachment). Optional pump kit: A suitable plug-in, fully integrated pump kit is available as an additional option, which can be used to transport the condensate to higher elevations or over greater distances. The pump kit can be easily removed at any time and replaced with a bucket. The built-in operating hour counter shows clearly and quickly how long the device has been in use. The consumption meter provides information about the power consumption in kWh.  Characteristics • Housing: Sheet steel coated in stainless steel look • Installation: Four abrasion-resistant rubber feet for floor installation • Air flow: Air inlet rear / Air outlet front • Carrying handle: Sturdy foldable handle for carrying • Wall mounting: Wall bracket optionally available • Stackable: for transport and storage • Air filter: Protects the device from dust • Fan: 2-stage, energy-efficient EC fan • Condensate drain: Water tank 7 liters with automatic shutdown when full and when drained, hose connection • Pump kit: Flexible pump kit for permanent condensate drainage (accessory) • Blue-Dry technology: For particularly energy-saving operation – even at low humidity and temperatures • Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example. • Hot gas defrosting: Can also be used in cooler environments thanks to automatic self-defrosting. • Suitable for unattended continuous operation It is suitable: • as a construction dryer • for dehumidification of basements, commercial premises, industry up to 60m² and in case of water damage • for unattended continuous operation • for operation with a timer The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use. This dryer is also available in the larger version AD540 . Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +3°C and +34°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% RH: 19 liters / 24h (power consumption: 330 W) 27°C / 60% RH: 11 liters / 24h (power consumption: 295 W) 20°C / 60% RH: 8 liters / 24h (power consumption: 260 W) 10°C / 70% RH: 6 liters / 24h (power consumption: 210 W) (RH=relative humidity)   latest technology Thanks to the latest technology, it is highly efficient and economical. The R1234yf refrigerant it contains has hardly any impact on the environment. The "Global Warming Potential (GWP)" is an incredible value of 4, which corresponds to a reduction of 99.5% compared to comparable models of previous generations.    Technical data  Tension: 220-240V / 50Hz Power consumption: max. 330W (1.4A) / 260W (at 20°C/60% RH) Sound pressure level: 1 m distance: 49 dB(A) 2.5 m distance: 46 dB(A) Dehumidification performance: max. 19 liters/day (30°C / 80% RH) air circulation volume: 2-stage 250 / 340 m³/h water bucket: 7 liter capacity, matching pump kit optionally available. Compressor: rotary compressor refrigerant: R1234yf Dimensions (H x W x D): 524 x 320 x 360 mm Weight: 17 kg Operating setting: Digital control panel Ambient temperature: Ambient humidity: 3°C ~ 34°C 30 - 95% RH Application area: up to 60m² (or 150 m³) Swiss plug: Yes hose connection: Yes Operating hour meter: Yes Consumption meter kWh: Yes Guarantee: 2 years

Read more less

The AD540 construction dryers from Aerial were specially developed for professional use. The extra-lightweight housings are particularly popular on construction sites and for drying water damage. Thanks to the latest technology, they are economical and can be used in temperature ranges down to 3°C. The water is collected in a 7-litre condensate tank as standard, with a float automatically stopping operation when the tank is full. The water can also be drained directly via the hose connection. The matching condensate hose has an inner diameter of 12mm = 1/2 inch and can be plugged directly onto the water nozzle without a coupling (we recommend a clamp for secure fastening). Optional pump kit: A suitable plug-in, fully integrated pump kit is available as an additional option, which can be used to transport the condensate to higher elevations or over greater distances. The pump kit can be easily removed at any time and replaced with a bucket. The built-in operating hour counter shows clearly and quickly how long the device has been in use. Two-stage blower with 500 or 625 m³ of circulating air per hour. AD540 Features • Housing: Sheet steel coated in stainless steel look • Installation: Four abrasion-resistant rubber feet for floor installation • Air flow: Air inlet rear / Air outlet front • Carrying handle: Sturdy foldable handle for carrying • Wall mounting: Wall bracket optionally available • Stackable: for transport and storage • Air filter: Protects the device from dust • Fan: 2-stage, energy-efficient EC fan • Condensate drain: Water tank 7 liters with automatic shutdown when full and when drained, hose connection • Pump kit: Flexible pump kit for permanent condensate drainage (accessory) • Blue-Dry technology: For particularly energy-saving operation – even at low humidity and temperatures • Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example. • Hot gas defrosting: Can also be used in cooler environments thanks to automatic self-defrosting. • Suitable for unattended continuous operation The AD540 is suitable: • as a construction dryer • for dehumidification of basements, commercial premises, industry up to 90m² and in case of water damage • for unattended continuous operation • for operation with a timer The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use. This dryer is also available in the smaller version AD520 . Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity.     dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +3°C and +34°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 34.0 liters / 24h (power consumption: 530 W) 27°C / 60% rF = 22.0 liters / 24h (power consumption: 430 W) 20°C / 60% rF = 16.6 liters / 24h (power consumption: 390 W) 10°C / 70% rF = 11.4 liters / 24h (power consumption: 330 W) (RH=relative humidity) Technical data  Tension: 220-240V / 50Hz Power consumption: max. 540W (2.3A) / 390W (at 20°C/60% RH) Sound pressure level: 1 m distance: 51 dB(A) 2.5 m distance: 54 dB(A) Dehumidification performance: max. 34 liters/day (30°C / 80% RH) air circulation volume: 2-stage 500 / 625 m³/h water bucket: 7 liter capacity, matching pump kit optionally available. Compressor: rotary compressor refrigerant: R454c GWP146 Dimensions (H x W x D): 578 x 329 x 380 mm Weight: 24 kg Operating setting: Digital control panel Ambient temperature: Ambient humidity: 3°C ~ 34°C 30 - 95% RH Application area: up to 60m² (or 150 m³) Swiss plug: Yes hose connection: Yes Operating hour meter: Yes Consumption meter kWh: Yes Guarantee: 2 years

Read more less

A high-quality dehumidifier for larger rooms or areas with high levels of humidity. Thanks to the latest technology, it is economical in consumption and can also be used in lower room temperatures down to 3°C. It stands on four castors and is ideal for use in industrial areas, in water supplies or for drying water damage. It is also available with a rack and two large castors as the AD660 Bluedry . The water is collected in a 14-litre condensate tank as standard, with a float automatically stopping operation when the tank is full. The water can also be drained directly via the hose connection. The condensate hose can be plugged directly onto the water nozzle without a coupling (we recommend a clamp for secure attachment). Optional pump kit: A suitable plug-in, fully integrated pump kit is available as an additional option, which can be used to transport the condensate to higher elevations or over greater distances. The pump kit can be easily removed at any time and replaced with a bucket. The built-in operating hour counter shows clearly and quickly how long the device has been in use. The consumption in kWh (consumption counter) is also shown on the display as standard. Two-stage fan.   Characteristics • Housing: Sheet steel coated in stainless steel look • Installation: Four sturdy rubber castors for floor installation • Air flow: Air inlet rear / Air outlet front • Carrying handle: Stable side carrying handles, foldable • Air filter: Protects the device from dust • Fan: 2-stage, energy-efficient EC fan • Condensate drain: Water tank 14 liters with automatic shutdown when full and when drained, hose connection • Pump kit: Flexible pump kit for permanent condensate drainage (accessory) • Blue-Dry technology: For particularly energy-saving operation – even at low humidity and temperatures • Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example. • Hot gas defrosting: Can also be used in cooler environments thanks to automatic self-defrosting. • Suitable for unattended continuous operation Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use.    dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +1°C and +34°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 60.0 liters / 24h (power consumption: 810 W) 27°C / 60% rF = 37.0 liters / 24h (power consumption: 700 W) 20°C / 60% rF = 26.0 liters / 24h (power consumption: 550 W) 10°C / 70% rF = 15.0 liters / 24h (power consumption: 450 W) (RH=relative humidity)    Technical data  Tension: 220-240V / 50Hz Power consumption: max. 810W (3.6A) / 550W (at 20°C/60% RH) Sound pressure level: 1 m distance: 55 dB(A) 2.5 m distance: 53 dB(A) Dehumidification performance: max. 60 liters/day (30°C / 80% RH) air circulation volume: 2-stage 425 / 700 m³/h water bucket: 14 liter capacity, matching pump kit optionally available. Compressor: rotary compressor refrigerant: R454c GWP146 Dimensions (H x W x D): 900 x 540 x 500 mm Weight: 40 kg Operating setting: Digital control panel Ambient temperature: Ambient humidity: 3°C ~ 34°C 30 - 95% RH Application area: up to 180m² (or 400 m³) Swiss plug: Yes hose connection: Yes, suitable hose inner diameter of 12mm = 1/2 inch Operating hour meter: Yes Consumption meter kWh: Yes Guarantee: 2 years

Read more less

A powerful dryer for demanding dehumidification tasks in large rooms. Thanks to its robust metal housing and solid internal components, it is designed for a long service life and unattended continuous operation. Due to these properties, it is often used in water management systems, in civil defense shelters and in industry. The moist room air is sucked in at the back of the housing and the dry air is blown out at the front. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device. The water extracted from the air is collected in the large bucket as standard, and operation is automatically interrupted when the bucket is full. Alternatively, the water can also be fed into a lower floor drain via a direct hose connection. If the hose cannot be laid in a falling manner, there is an optional suitable pump kit with which the condensate can be transported upwards and over longer distances. The socket for connecting the suitable pump kit is already prepared in the device, so that you can switch between operation with a bucket or pump at any time as required. service The device is operated via the control panel on the side. This is comfortable and clear. It shows all the important information and the desired values ​​can be set at the touch of a button. The control panel has the following functions: • On/off switch • Display: kWh and operating hours • Display of actual/target humidity • Setting the desired target humidity (remains even after a power failure) or continuous operation • Setting the fan level (strong/weak) • Display language selectable Characteristics • Housing: Sheet steel coated in stainless steel look • Installation: Four sturdy rubber castors for floor installation • Air flow: Air inlet rear / Air outlet front • Carrying handle: Stable side carrying handles, foldable • Air filter: Protects the device from dust • Fan: 1-stage radial fan with high air speed • Condensate drain: Water tank 14 liters with automatic shutdown when full and when drained, hose connection • Pump kit: Flexible pump kit for permanent condensate drainage (accessory) • Blue-Dry technology: For particularly energy-saving operation – even at low humidity and temperatures • Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example. • Hot gas defrosting: Can also be used in cooler environments thanks to automatic self-defrosting. • Suitable for unattended continuous operation Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use. performance and consumption Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +3°C and +32°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 78.0 liters / 24 h (power consumption: 1070 W) 27°C / 60% rF = 56.0 liters / 24 h (power consumption: 910 W) 20°C / 60% rF = 40.0 liters / 24 h (power consumption: 740 W) 10°C / 70% rF = 13.0 liters / 24 h (power consumption: 530 W) (RH = relative humidity)     Technical data  Tension: 230V / 50Hz Power consumption: 1070W max. 740W (at 20°C/60% RH) Sound pressure level: 2.5 m distance 65 dB(A) Dehumidification performance: 78 liters/day (30°C / 80% RH) condensate tank: Approx. 14 liters Air volume level 1 / 2: 600 / 886 m³/h Compressor: rotary compressor refrigerant: R454c GWP146 Dimensions (H/W/D): 79 x 45 x 45 cm Weight: 40 kg Operating setting: Digital control panel Ambient temperature: 3°C ~ 32°C Swiss plug: Yes Protection class: IPX4 Guarantee: 2 years

Read more less

The Aerial AD660 is a high-quality, powerful dehumidifier for dehumidifying larger areas on construction sites, in warehouses, industrial and commercial premises. It is also frequently used in water supplies and public facilities (civil defense, army, municipalities). It has a large condensate bucket (14L) with a float, which automatically stops operation when the bucket is full. Alternatively, the extracted water can be fed directly into a floor drain via a hose. If the hose cannot be laid in a downward direction, there is an optional pump kit with which the condensate can be pumped upwards and over longer distances. The socket for connecting the appropriate pump kit is already prepared in the device, so that you can switch between operation with a bucket or pump at any time as required. The moist room air is sucked in at the back of the housing and the dry air is blown out at the front. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device. The device is operated via the control panel on the side. This is comfortable and clear. It shows all the important information and the desired values ​​can be set at the touch of a button. The control panel has the following functions: • On/off switch • Display: kWh and operating hours • Display of actual/target humidity • Setting the desired target humidity (remains even after a power failure) or continuous operation • Setting the fan level (strong/weak) • Display language selectable  Characteristics • Housing: Sheet steel coated in stainless steel look. • Setup: Rack and two large castors for both good stability and mobility. • Air flow: air inlet at the rear / air outlet at the front . • Air filter: Protects the device from dust. • Fan: 2-speed, energy efficient EC fan. • Condensate drain: 14 litre water tank with automatic shut-off when full and when drained, hose connection. • Pump kit: Flexible pump kit for permanent condensate drainage (accessory). • Blue-Dry technology: For particularly energy-saving operation – even at low humidity and temperatures • Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example. • Hot gas defrosting: Can also be used in cooler environments thanks to automatic self-defrosting. • Suitable for unattended continuous operation Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use.   dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +3°C and +34°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 60.0 liters / 24h (power consumption: 810 W) 27°C / 60% rF = 37.0 liters / 24h (power consumption: 700 W) 20°C / 60% rF = 26.0 liters / 24h (power consumption: 550 W) 10°C / 70% rF = 15.0 liters / 24h (power consumption: 450 W) (RH=relative humidity)     Technical data  Tension: 230V / 50Hz Power consumption: 810W max. 550W (at 20°C/60% RH) Sound pressure level: 2.5 m distance 53 dB(A) Dehumidification performance: 60 liters/day (30°C / 80% RH) condensate tank: Approx. 14 liters Air volume level 1 / 2: 425 / 700 m³/h Compressor: rotary compressor refrigerant: R407c Dimensions (H/W/D): 90 x 54 x 50 cm Weight: 40 kg Operating setting: Digital control panel Ambient temperature: 3°C ~ 34°C Swiss plug: Yes Protection class: IPX4 Guarantee: 2 years

Read more less

The AD680 is one of the most powerful dehumidifiers and, thanks to its robust design, is often used on construction sites, at sites where damage has occurred (e.g. after flooding or power failures), and in industry. It also performs reliably in unattended continuous operation. The moist room air is sucked in at the back of the housing and the dry air is blown out at the front. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device. The water extracted from the air is collected in the large bucket as standard, and operation is automatically interrupted when the bucket is full. Alternatively, the water can also be fed into a lower floor drain via a direct hose connection. If the hose cannot be laid in a falling manner, there is an optional suitable pump kit with which the condensate can be transported upwards and over longer distances. The socket for connecting the suitable pump kit is already prepared in the device, so that you can switch between operation with a bucket or pump as required at any time. service The device is operated via the control panel on the side. This is comfortable and clear. It shows all the important information and the desired values ​​can be set at the touch of a button. The control panel has the following functions: • On/off switch • Display: kWh and operating hours • Display of actual/target humidity • Setting the desired target humidity (remains even after a power failure) or continuous operation • Setting the fan level (strong/weak) • Display language selectable AD680 Features • Housing: Sheet steel coated in stainless steel look • Setup: Rack and two large wheels for secure positioning and easy mobility • Air flow: Air inlet rear / Air outlet front • Air filter: Protects the device from dust • Fan: 1-stage radial fan with high air speed • Defrosting: Demand-controlled hot gas defrosting • Condensate drain: Water tank 14 liters with automatic shutdown when full and when drained, hose connection • Pump kit: Flexible pump kit for permanent condensate drainage (accessory) • Blue-Dry technology: For particularly energy-saving operation – even at low humidity and temperatures • Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example. • Hot gas defrosting: Can also be used in cooler environments thanks to automatic self-defrosting. • Suitable for unattended continuous operation Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use. performance and consumption Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +3°C and +32°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 78.0 liters / 24 h (power consumption: 1070 W) 27°C / 60% rF = 56.0 liters / 24 h (power consumption: 910 W) 20°C / 60% rF = 40.0 liters / 24 h (power consumption: 740 W) 10°C / 70% rF = 13.0 liters / 24 h (power consumption: 530 W) (RH = relative humidity)     Technical data  Tension: 230V / 50Hz Power consumption: 1070W max. 740W (at 20°C/60% RH) Sound pressure level: 2.5 m distance 65 dB(A) Dehumidification performance: 78 liters/day (30°C / 80% RH) condensate tank: Approx. 14 liters Air volume level 1 / 2: 600 / 886 m³/h Compressor: rotary compressor refrigerant: R454c Dimensions (H/W/D): 79 x 45 x 45 cm Weight: 40 kg Operating setting: Digital control panel Ambient temperature: 3°C ~ 32°C Swiss plug: Yes Protection class: IPX4 Guarantee: 2 years

Read more less

A powerful dehumidifier for construction sites and industry. The powerful fan ensures a wide-area exchange of moist and dry air. It has a housing made of impact-resistant plastic, two large wheels and a fold-up handle for easy movement around the floor and even over stairs.   The moist air is drawn in at the back via an easily removable air filter. The dry air is blown out at the front through slanted slats. Characteristics • Fan: Axial fan with aluminum impeller. Motor with winding protection. • Compressor: Fully hermetic rotary piston compressor, protected against overload, vibration-damped mounting. • Condenser/evaporator: made of copper tubes with attached aluminum fins • Self-defrosting: automatic hot gas defrosting controlled by DryLogic, therefore usable down to freezing point • Collection container: 6.8 liters with automatic full level shut-off • Hose connection: nozzle (15 mm) for direct condensate drainage. Pump available as an option. • Hygrostat: digital with hygrostat rotary knob • Operating hour counter • Consumption meter kWh: calibrated, can be read without power • 2 large transport wheels: for easy mobility on construction and damage sites • Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example. • Suitable for unattended continuous operation. Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity.    dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +1°C and +34°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: at 30°C / 80% RH = 37.0 liters / day (power consumption: 520 W) at 27°C / 60 %RH = 23.0 liters / day (power consumption: 430 W) at 20°C / 60% RH = 16.5 liters / day (power consumption: 390 W) at 10°C / 70% RH = 8.0 liters / day (power consumption: 320 W)   Technical data   Tension: 230V / 50Hz Power consumption: max. 520 W (10A) / 390W (at 20°C/60% RH) Sound pressure level: 2.5 m distance 51 dB(A) (manufacturer information) Dehumidification performance: max. 37 liters/day (30°C / 80% RH) Recirculation air volume level 1/2: 450 / 550 m³/h condensate tank: approx. 6.8 liters Compressor: rotary compressor refrigerant: R407c (550gr.) Dimensions (H / W / D): 690 x 390 x 470 mm Weight: 32 kg Operating setting: Digital control panel Ambient temperature: 1°C ~ 34°C (35 - 99% RH) Application area: up to 100m² / 300m³ Swiss plug: Yes hose connection: Yes Operating hour meter: Yes Guarantee: 2 years

Read more less

The Aerial AD 750 is a very powerful, robustly built dehumidifier for construction sites and industry. The powerful fan ensures a wide-area exchange of moist and dry air.   The AD750 has a solid housing made of impact-resistant plastic, sturdy guide brackets and side rollers for easy mobility on the floor. The dryer can even be pulled up stairs with these rollers. When used as a construction site dehumidifier, however, the weight should be taken into account; two people are required to move it across floors or scaffolding. The moist air is drawn in at the back via an easily removable air filter. The dry air is blown out at the front through slanted slats. Characteristics • Fan: Axial fan with aluminum impeller. Fan motor with winding protection. • Compressor: Fully hermetic rotary piston compressor, protected against overload, vibration-damped mounting. • Condenser/evaporator: made of copper pipes with aluminum fins. Refrigeration circuit made of copper pipe with capillary tube and filter dryer. Service connection on the suction side. • Self-defrosting: Automatic hot gas defrosting controlled by DryLogic. • Collection container: 12 liters, with automatic full-level shut-off. • Hose connection: nozzle (15 mm) for direct condensate drainage. • Hygrostat: Hygrostat rotary knob • Operating hour counter • 2 large transport wheels: good mobility thanks to 2 large transport wheels, ergonomically shaped housing. • Stackable  designs The AD750 is available in two versions: with bucket without pump or with pump without bucket. Please select the model you require. dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +3°C and +32°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions:  at 30°C / 80% RH = 55.0 liters / day (power consumption: 900 W) at 27°C / 60 %RH = 34.1 liters / day (power consumption: 780 W) at 20°C / 60% RH = 24.5 liters / day (power consumption: 660 W) at 10°C / 70% RH = 14.0 liters / day (power consumption: 560 W)     Technical data Tension: 230V / 50Hz Power consumption: max. 900W (10A) / 660W (at 20°C/60% RH) Sound pressure level: 2.5 m distance 53 dB(A) (manufacturer information) Dehumidification performance: 55 liters/day (30°C / 80% RH) air circulation volume: 710 m³/h (measurement built in) condensate tank: approx. 12 liters Compressor: rotary compressor refrigerant: R407c (550gr.) Dimensions (H/W/D): 88 x 52 x 49.5 cm Weight: 42 kg Operating setting: hygrostat wheel Ambient temperature: 3°C ~ 32°C (40 - 95% RH) Application area: up to 600m³ (temperature-controlled rooms) or 400m³ (unheated) Swiss plug: Yes hose connection: Yes Operating hour meter: Yes Guarantee: 2 years

Read more less

Powerful, robustly built dehumidifier for construction sites and industry with integrated pump. The powerful fan ensures a wide-area exchange of moist and dry air.   The AD750 has a solid housing made of impact-resistant plastic, sturdy guide brackets and side rollers for easy mobility on the floor. The dryer can even be pulled up stairs with these rollers. When used as a construction site dehumidifier, however, the weight should be taken into account; two people are required to move it across floors or scaffolding. The moist air is drawn in at the back via an easily removable air filter. The dry air is blown out at the front through slanted slats. Characteristics • Fan: Axial fan with aluminum impeller. Fan motor with winding protection. • Compressor: Fully hermetic rotary piston compressor, protected against overload, vibration-damped mounting. • Condenser/evaporator: made of copper pipes with aluminum fins. Refrigeration circuit made of copper pipe with capillary tube and filter dryer. Service connection on the suction side. • Self-defrosting: Automatic hot gas defrosting controlled by DryLogic. • Collection container: 12 liters, with automatic full-level shut-off. • Integrated condensate pump: delivery head up to 4 m, additional direct hose connection ( 15 mm nozzle) for direct condensate drainage into the floor drain. • Hygrostat: Hygrostat rotary switch • Operating hour counter • 2 large transport wheels: good mobility thanks to 2 large transport wheels, ergonomically shaped housing. • Stackable  designs The AD750 is available in two versions: with bucket without pump or with pump without bucket. Please select the model you require. dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +3°C and +32°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions:  at 30°C / 80% RH = 55.0 liters / day (power consumption: 900 W) at 27°C / 60 %RH = 34.1 liters / day (power consumption: 780 W) at 20°C / 60% RH = 24.5 liters / day (power consumption: 660 W) at 10°C / 70% RH = 14.0 liters / day (power consumption: 560 W)     Technical data Tension: 230V / 50Hz Power consumption: max. 900W (10A) / 660W (at 20°C/60% RH) Sound pressure level: 2.5 m distance 53 dB(A) (manufacturer information) Dehumidification performance: 55 liters/day (30°C / 80% RH) air circulation volume: 710 m³/h (measurement built in) condensate tank: 750P no bucket Compressor: rotary compressor refrigerant: R407c (550gr.) Dimensions (H/W/D): 88 x 52 x 49.5 cm Weight: 42 kg Operating setting: hygrostat wheel Ambient temperature: 3°C ~ 32°C (40 - 95% RH) Application area: up to 600m³ (temperature-controlled rooms) or 400m³ (unheated) Swiss plug: Yes hose connection: Yes Operating hour meter: Yes Guarantee: 2 years

Read more less

These high-quality devices are used in construction and water damage drying as well as in industry, commerce, value preservation and water management. They can be used multifunctionally for dehumidification. The robust, rotationally molded plastic housing is absolutely shock and break-proof and impresses with its high-quality appearance and distinctive design.   The advantages at a glance Robust, rotationally molded plastic housing – absolutely shock and break-proof Easy cleaning and disassembly of the housing for service work High-quality optics and the distinctive design Clear arrangement of the controls facing the user Easy adjustment of the desired room humidity thanks to the built-in hygrostat Standard operating hour counter reliably shows the total operating time Optimal handling and carrying in mobile use thanks to the large transport wheels and various handle options Due to demand-controlled hot gas defrosting, it is ideal for cold areas, e.g. in waterworks, unheated well shafts and pumping stations   Features:   ROBUST HOUSINGS Shock- and impact-resistant plastic housing, robust and easy to clean   STACKABLE The devices are stackable for storage purposes   FAN 2-stage energy-efficient EC axial fan   NOISE LEVEL AD 780-P 55 dB(A)   DEFROST Demand-controlled hot gas defrosting   PRACTICAL CABLE WINDING Proper and safe storage of the power cord Prevents damage and accidents   WHEELS Optimal mobility thanks to two plastic wheels   AIR FLOW air inlet rear air outlet front   REPLACEABLE AIR FILTER Quick and easy to change Protects the device from dirt and dust   HUMIDITY CONTROL Continuously adjustable hygrostat   COUNTER Operating hour counter. Optionally also with combination meter (kWh and operating hours)   Technical data  Tension 230V / 50Hz power consumption 1250 W max. sound pressure level 2.5 m distance 60 dB(A) dehumidification performance 76 liters/day (30°C / 80% RH) water pump standard (no bucket), discharge head 4 m amount of recirculated air 760 m³/h compressor rotary compressor refrigerant R454C Dimensions (H x W x D) 1000 x 640 x 580 mm Weight 57 kg ambient temperature ambient humidity 5 °C - 32 °C 35% RH - 95% RH Swiss plug Yes, cable length approx. 4.5 m hose connection 12 mm hose inner diameter guarantee 2 years

Read more less

State-of-the-art drying technology! The 9 series of Aerial construction dryers was developed completely to meet the needs of use on construction sites, in industry and for drying water damage. The dryers have an MID-approved kWh meter and a non-resettable hour meter as standard. Thanks to the CC 6 control, the devices are compatible with the "Simplify" remote monitoring solution, which allows operation to be conveniently monitored remotely. The AD-935 has an 8-litre condensate tank and a connection nozzle for direct drainage of the condensate via a hose. A suitable pump kit is also available, which the device automatically recognises when inserted. The moist room air is sucked in at the front of the housing and the dry air is blown out to the rear. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device.    service   The device is operated via the control panel on the side. With only three buttons, it is comfortable and easy to use. It shows all the important information and the desired values ​​can be set at the touch of a button. • Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Fully graphical display, no translation required     High service friendliness   The housing was designed so that it can be opened with little effort. This means that internal components can be cleaned quickly and easily or replaced if necessary.     Features at a glance   • CC 6 control unit compatible with the Simplify remote monitoring solution • OEM versions available on request (minimum order quantity 50) • Use of standardized components from the Dantherm Group product portfolio ensures quick access to spare parts • Integrated interface for accessories (dew point kit and external hygrostat) • Automatic detection of the pump kit • Various drainage options: standard with Ø15mm hose connection, water tank and optional pump set • MID-approved kWh meter and non-resettable hour meter as standard • 2-speed fan • Integrated night mode for quieter operation in occupied rooms • R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential) • Large wheels • Telescopic handle • Stackable • Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range between +5 °C and +30 °C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 34.0 liters / 24h (power consumption: 610 W) 20°C / 60% rF = 16.5 liters / 24h (power consumption: 450 W) (RH=relative humidity)     Technical data  Tension 230V / 50Hz power consumption 610 W max. sound pressure level 2.5 m distance 51 dB(A) dehumidification performance 34 liters/day (30°C / 80% RH) condensate tank Approx. 8 liters air volume level 1 / 2 300 / 420 m³/h (night mode: 300 m³/h) compressor rotary compressor refrigerant R454C Dimensions (H x W x D) 860 x 392 x 508 mm Weight 35.4 kg cessation of operations CC 6 control panel, wireless connection with Simplify remote monitoring possible ambient temperature ambient humidity 5 °C - 30 °C 30% RH - 90% RH Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years

Read more less

State-of-the-art drying technology! The 9 series of Aerial construction dryers was developed completely to meet the needs of use on construction sites, in industry and for drying water damage. The dryers have an MID-approved kWh meter and a non-resettable hour meter as standard. Thanks to the CC 6 control, the devices are compatible with the "Simplify" remote monitoring solution, which allows operation to be conveniently monitored remotely. The AD-935S has an 8-litre condensate tank and a connection nozzle for direct drainage of the condensate via a hose. A suitable pump kit is also available, which the device automatically recognises when inserted. The moist room air is sucked in at the front of the housing and the dry air is blown out at the back. The air is blown out via two Ø100mm nozzles, which blow the air out into the room at a good speed. Air hoses can also be attached to these nozzles if the dry air is to be directed precisely to a specific location. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device.    service   The device is operated via the control panel on the side. With only three buttons, it is comfortable and easy to use. It shows all the important information and the desired values ​​can be set at the touch of a button. • Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Fully graphical display, no translation required     High service friendliness   The housing was designed so that it can be opened with little effort. This means that internal components can be cleaned quickly and easily or replaced if necessary.     dehumidification performance The dryer can be used over a temperature range between +5 °C and +30 °C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 28.0 liters / 24h (power consumption: 785 W) 20°C / 60% rF = 13 liters / 24h (power consumption: 560 W) (RH=relative humidity)     Features at a glance   • CC 6 control unit compatible with the Simplify remote monitoring solution • OEM versions available on request (minimum order quantity 50) • Use of standardized components from the Dantherm Group product portfolio ensures quick access to spare parts • Integrated interface for accessories (dew point kit and external hygrostat) • Automatic detection of the pump kit • Various drainage options: standard with Ø15mm hose connection, water tank and optional pump set • MID-approved kWh meter and non-resettable hour meter as standard • 1-speed fan • Integrated night mode for quieter operation in occupied rooms • R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential) • Large wheels • Telescopic handle • Stackable • Equipped with a 1kW electric heating element and 2x Ø100mm duct connections • Maintenance and service friendly     Technical data  Tension 230V / 50Hz power consumption 785 W max. (1785 W with additional heater) additional heating +1000 W sound pressure level 2.5 m distance 53 dB(A) dehumidification performance 28 liters/day (30°C / 80% RH) condensate tank Approx. 8 liters air volume 400 m³/h compressor rotary compressor refrigerant R454C Dimensions (H x W x D) 860 x 391 x 505 mm Weight approx. 36 kg cessation of operations CC 6 control panel, wireless connection with Simplify remote monitoring possible ambient temperature ambient humidity 5 °C - 30 °C 30% RH - 90% RH Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years

Read more less

State-of-the-art drying technology! The 9 series of Aerial construction dryers was developed completely to meet the needs of use on construction sites, in industry and for drying water damage. The dryers have an MID-approved kWh meter and a non-resettable hour meter as standard. Thanks to the CC 6 control, the devices are compatible with the "Simplify" remote monitoring solution, which allows operation to be conveniently monitored remotely. The AD-955 has a 13-litre condensate tank and a connection nozzle for direct drainage of the condensate via a hose. A suitable pump kit is also available, which the device automatically recognises when inserted. The moist room air is sucked in at the front of the housing and the dry air is blown out to the rear. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device.    service   The device is operated via the control panel on the side. With only three buttons, it is comfortable and easy to use. It shows all the important information and the desired values ​​can be set at the touch of a button. • Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Fully graphical display, no translation required     High service friendliness   The housing was designed so that it can be opened with little effort. This means that internal components can be cleaned quickly and easily or replaced if necessary.     Features at a glance   • CC 6 control unit compatible with the Simplify remote monitoring solution • OEM versions available on request (minimum order quantity 50) • Use of standardized components from the Dantherm Group product portfolio ensures quick access to spare parts • Integrated interface for accessories (dew point kit and external hygrostat) • Automatic detection of the pump kit • Various drainage options: standard with Ø15mm hose connection, water tank and optional pump set • MID-approved kWh meter and non-resettable hour meter as standard • 2-speed fan • Integrated night mode for quieter operation in occupied rooms • R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential) • Large wheels • Telescopic handle • Stackable • Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range between +5 °C and +30 °C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 53 liters / 24h (power consumption: 830 W) 20°C / 60% rF = 22.5 liters / 24h (power consumption: 560 W) (RH=relative humidity)     Technical data  Tension 230V / 50Hz power consumption 830 W max. sound pressure level 2.5 m distance 53 dB(A) dehumidification performance 53 liters/day (30°C / 80% RH) condensate tank Approx. 13 liters air volume level 1 / 2 290 / 550 m³/h (night mode: 290 m³/h) compressor rotary compressor refrigerant R454C Dimensions (H x W x D) 845 x 452 x 538 mm Weight 41.8 kg cessation of operations CC 6 control panel, wireless connection with Simplify remote monitoring possible ambient temperature ambient humidity 5 °C - 30 °C 30% RH - 90% RH Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years

Read more less

State-of-the-art drying technology! The 9 series of Aerial construction dryers was developed completely to meet the needs of use on construction sites, in industry and for drying water damage. The dryers have an MID-approved kWh meter and a non-resettable hour meter as standard. Thanks to the CC 6 control, the devices are compatible with the "Simplify" remote monitoring solution, which allows operation to be conveniently monitored remotely. Due to its high dehumidification performance, the AD-975 is equipped with a water pump as standard. The moist room air is sucked in at the front of the housing and the dry air is blown out to the rear. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device.     service   The device is operated via the control panel on the side. With only three buttons, it is comfortable and easy to use. It shows all the important information and the desired values ​​can be set at the touch of a button. • Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Fully graphical display, no translation required     High service friendliness   The housing was designed so that it can be opened with little effort. This means that internal components can be cleaned quickly and easily or replaced if necessary.     Features at a glance   • CC 6 control unit compatible with the Simplify remote monitoring solution • OEM versions available on request (minimum order quantity 50) • Use of standardized components from the Dantherm Group product portfolio ensures quick access to spare parts • Integrated interface for accessories (dew point kit and external hygrostat) • Equipped with pump set as standard, no bucket • MID-approved kWh meter and non-resettable hour meter as standard • 2-speed fan • Integrated night mode for quieter operation in occupied rooms • R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential) • Large wheels • Telescopic handle • Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range between +5 °C and +30 °C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 76 liters / 24h (power consumption: 1070 W) 20°C / 60% rF = 34.5 liters / 24h (power consumption: 785 W) (RH=relative humidity)     Technical data  Tension 230V / 50Hz power consumption 1070 W max. sound pressure level 2.5 m distance 64 dB(A) dehumidification performance 76 liters/day (30°C / 80% RH) water pump standard (no bucket), discharge head 4 m air volume level 1 / 2 750 / 900 m³/h (night mode: 750 m³/h) compressor rotary compressor refrigerant R454C Dimensions (H x W x D) 906 x 502 x 547 mm Weight 48.3 kg cessation of operations CC 6 control panel, wireless connection with Simplify remote monitoring possible ambient temperature ambient humidity 5 °C - 30 °C 30% RH - 90% RH Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years

Read more less

State-of-the-art drying technology! The 9 series of Aerial construction dryers was developed completely to meet the needs of use on construction sites, in industry and for drying water damage. The dryers have an MID-approved kWh meter and a non-resettable hour meter as standard. Thanks to the CC 6 control, the devices are compatible with the "Simplify" remote monitoring solution, which allows operation to be conveniently monitored remotely. Due to its high dehumidification performance, the AD-995 is equipped with a water pump as standard. The moist room air is sucked in at the front of the housing and the dry air is blown out to the rear. In the intake area, a reusable, industrial filter mat cleans the air and ensures that flying particles do not get into the device.     service   The device is operated via the control panel on the side. With only three buttons, it is comfortable and easy to use. It shows all the important information and the desired values ​​can be set at the touch of a button. • Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Fully graphical display, no translation required     High service friendliness   The housing was designed so that it can be opened with little effort. This means that internal components can be cleaned quickly and easily or replaced if necessary.     Features at a glance   • CC 6 control unit compatible with the Simplify remote monitoring solution • OEM versions available on request (minimum order quantity 50) • Use of standardized components from the Dantherm Group product portfolio ensures quick access to spare parts • Integrated interface for accessories (dew point kit and external hygrostat) • Equipped with pump set as standard, no bucket • MID-approved kWh meter and non-resettable hour meter as standard • 2-speed fan • Integrated night mode for quieter operation in occupied rooms • R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential) • Large wheels • Telescopic handle • Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range between +5 °C and +30 °C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 95 liters / 24h (power consumption: 1830 W) 20°C / 60% rF = 46.5 liters / 24h (power consumption: 1282 W) (RH=relative humidity)     Technical data  Tension 230V / 50Hz power consumption 1900 W max. sound pressure level 2.5 m distance 64 dB(A) dehumidification performance 76 liters/day (30°C / 80% RH) water pump standard (no bucket), discharge head 4 m air volume level 1 / 2 750 / 900 m³/h (night mode: 750 m³/h) compressor rotary compressor refrigerant R454C Dimensions (H x W x D) 906 x 502 x 547 mm Weight 58.2 kg cessation of operations CC 6 control panel, wireless connection with Simplify remote monitoring possible ambient temperature ambient humidity 5 °C - 30 °C 30% RH - 90% RH Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years

Read more less

The AD40 is versatile and so light that it can be carried like a suitcase. Thanks to BlueDry® technology, the AD40 dehumidifies consistently and reliably even at low humidity and temperatures. service It is easy to operate using the innovative eDRY® electronics. All controls are clearly arranged and all important operating states can be called up at any time. The target and actual humidity are shown on the display. Operating hours (consumption) can be easily read. Energy consumption is shown using the additional, calibrated energy meter. The control system is equipped with a memory function. This means that in the event of a power failure, e.g. on construction sites, operation will resume with the same settings as soon as the power is restored. water bucket or optional pump The water collection container (6.8 liters) is easy to remove, carry and empty. It is located inside, and the fill level of the water bucket is measured by a float. When it is full, this automatically stops operation, and operation also starts again automatically when the bucket is put back in. A suitable pump kit is optionally available, which can be used flexibly and is also suitable for unattended continuous operation. Robust housing The housing is easy to clean and easy to dismantle for any service work that may be required. It has a fold-up handle. Lashing straps can be attached to each side. The protected socket is used to connect additional devices. Four robust, stable plastic feet for floor installation. Can be stacked with other Aerial Aercube devices. Characteristics  • Housing: made of robust, impact-resistant and UV-resistant plastic, lightweight. Fixing points for AERCUBE® lashing system. • Cable: integrated cable winding. • Installation: freestanding or mounted on Aercube system (fixing points for AERCUBE lashing system). • Air flow: transverse, side intake and outlet. • Air filter: Protects the device from dust. • Fan: 2-speed, energy efficient EC fan. • Defrost: Demand-controlled hot gas defrosting. • Condensate pump: Optional pump kit available. • Blue-Dry technology: For particularly energy-saving operation – even at low humidity and temperatures. • Calibrated energy meter (MID compliant). • Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example. • Hot gas defrosting: Can also be used in cooler environments thanks to automatic self-defrosting. • Suitable for unattended continuous operation. • Own design: available in all colours and with your logo for larger quantities. All AERCUBE system components are 100% compatible with each other and stackable. Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity.    dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +1°C and +34°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 35.0 liters / 24h (power consumption: 520W) 27°C / 60% rF = 22.0 liters / 24h (power consumption: 430W) 20°C / 60% rF = 15.0 liters / 24h (power consumption: 370W) 10°C / 70% rF = 8.0 liters / 24h (power consumption: 300W) (RH=relative humidity)     Technical data   Tension: 230V / 50Hz Power consumption: max. 530W Sound pressure level: 1 m distance 57 dB(A) 2.5 m distance 54 dB(A) 3 m distance 53 dB(A) Dehumidification performance: max. 35.0 liters / day (30°C / 80% RH) Bucket: Capacity 6.8 liters, Operational interruption due to floats Recirculation air volume level 1 / 2: 300 / 400 m³/h refrigerant: R407C Dimensions (H/W/D): 580 / 390 / 450 mm Weight: 25 kg Operating setting: Digital Ambient temperature: +1°C - +34°C Application area: up to approx. 100 m² Swiss plug: Yes hose connection: connection piece for direct hose connection Optional pump kit Operating hour meter: Yes Guarantee: 2 years

Read more less

The HEPA filter system "HF2" is an element of the Aerial-Aercube series. Using a class G4 pre-filter and a HEPA filter H13, it cleans the air drawn in with a purity rate of almost 100%. It cleans the air very effectively, particularly in dusty construction environments and when remediating mold, and prevents dust, spores or viruses* from spreading throughout the building. It is suitable for continuous operation and can be combined with all elements of the Aercube system. A sensor measures the degree of contamination of the filters and automatically reports when they need to be changed via an LED display on the front of the housing. The HF2 itself does not require a power connection, but works purely with the air flow from the supplying devices. The LED display is therefore powered by a CR2032 battery (round flat battery). The battery charge level can be checked at any time by pressing a button. Thanks to two quick-release safety fasteners, the device can be opened quickly and the filters can be easily changed. The filters are disposable products and can be reordered individually. Features and Benefits • Efficient filter system with built-in H13 HEPA filter and G4 pre-filter • LED display informs about dirty filters • Suitable for Ø 38 mm / Ø 50 mm hose systems • Ready to connect with up to 270 m³/h air flow • Easy-to-open safety quick-release fasteners< • Various grip and carrying options • Robust AERCUBE housing • Battery check at the push of a button All AERCUBE system components are 100% compatible with each other and stackable.     Please note The shape and design of the pre-filter and HEPA filter was changed a few years ago. When ordering replacement filters, please make sure you order the version that fits your device (round/square).    *Regarding cleaning effect against the corona virus Coronaviruses have a diameter of approximately 60 - 160 nm (60 nm = 0.00006 mm). The HEPA filter in this device cleans particles up to 0.0003 mm in size. The virus is therefore smaller than the purity rate of the filter. But: viruses do not fly individually in the air, but are always enclosed in larger droplets (so-called aerosols). In human breath, the smallest droplets have a size of approx. 1 µm = 0.001 mm (when coughing: 10 µm = 0.01mm). The HEPA filter therefore catches the aerosols and also cleans the air of COVID19 viruses. Of course, there is no 100% protection, as an air purifier does not clean the entire room volume at once and because surfaces can also be contaminated by touch. However, the device is very effective and recommended for reducing risk, e.g. in waiting rooms, classrooms, offices or even in private environments.  Technical data Tension:  does not require a power connection. LED display is powered by a round flat battery CR2032 Air flow: up to 270m³/h Weight: 6 kg Dimensions H x W x D: 300 x 390 x 490mm Control panel: LED indicator for filter change "Battery Check" button Guarantee: 2 years, housing 5 years

Read more less

The AD20 is a robustly built condensation dryer. It is light, handy and can be carried like a suitcase. Thanks to BlueDry technology, the AD20 dehumidifies reliably even at low humidity and temperatures. Another plus is the permanently installed, automatic condensate pump with overflow protection (delivery head up to 4 meters). Latest technology with environmentally friendly refrigerant R1234yf. service It is easy to operate using the innovative eDRY® electronics. All controls are clearly arranged and all important operating states can be called up at any time. The target and actual humidity are shown on the display. Operating hours (consumption) can be easily read. Energy consumption is shown using the additional, calibrated energy meter. The control system is equipped with a memory function. This means that in the event of a power failure, e.g. on construction sites, operation will resume with the same settings as soon as the power is restored. Robust housing made of impact-resistant plastic. It is easy to clean and can be easily dismantled for any service work that may be required. It has a fold-up handle. Lashing straps can be attached to each side. The fused socket is used to connect additional devices. Features and Benefits • Housing: made of robust, impact-resistant and UV-resistant plastic, lightweight at only 16.4 kg. • Cable: integrated cable winding. • Installation: freestanding or mounted on Aercube system (fixing points for AERCUBE lashing system). • Air flow: transverse, side intake and outlet. • Air filter: Protects the device from dust. • Fan: 2-speed, energy efficient EC fan. • Defrost: Demand-controlled hot gas defrosting. • Condensate pump: Automatic water pump with overflow protection integrated as standard. • Blue-Dry technology: For particularly energy-saving operation – even at low humidity and temperatures. • Calibrated energy meter (MID compliant). • Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example. • Hot gas defrosting: Can also be used in cooler environments thanks to automatic self-defrosting. • Suitable for unattended continuous operation. • Own design: available in all colours and with your logo for larger quantities. All AERCUBE system components are 100% compatible with each other and stackable.  Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity.    dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +1°C and +34°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 18.0 liters / 24h (power consumption: 350 W) 27°C / 60% rF = 11.0 liters / 24h (power consumption: 310 W) 20°C / 60% rF = 9.0 liters / 24h (power consumption: 260 W) 10°C / 70% rF = 5.0 liters / 24h (power consumption: 215 W) (RH=relative humidity)        Technical data  Tension: 230V / 50Hz Power consumption: max. 350W Sound pressure level: 1 m distance 54 dB(A) 2.5 m distance 51 dB(A) 3 m distance 50 dB(A) Dehumidification performance: max. 18.0 liters / day (30°C / 80% RH) bucket / pump No bucket. Integrated pump with overflow protection, 4 m discharge head. air circulation level 1/2 200 / 270 m³/h refrigerant: R1234yf Dimensions (H/W/D): 420 / 320 / 500 mm Weight: 16.4 kg Operating setting: Digital Ambient temperature: +1°C - +34°C Application area: up to approx. 50 m² Swiss plug: Yes Operating hour meter: Yes Guarantee: 2 years

Read more less

The VP3 sound boxes are suitable for intensive use in water damage drying. They generate pressure that can be used for both suction and blowing. They work with air-cooled side channel compressors in the robust AERCUBE housing. Thanks to various handle and carrying options, the devices have excellent handling properties. A lashing system provides additional stability during transport or storage.  Features and Benefits Air-cooled side channel compressor, vibration-damped mounting 1100 W motor power For drying areas of approx. 30 – 50 m² Intelligent E.DRY electronics with full-text display Bar graph and multi-colored LED for reading the back pressure Operating and kWh meters can be read without electricity Very quiet thanks to highly efficient sound insulation technology Easy-to-open safety quick-release fasteners Various grip and carrying options Extremely robust AERCUBE housing Integrated cable winder with magnetic plug holder   All AERCUBE system components are 100% compatible with each other and stackable. Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use. Technical data Tension: 1 x 230V / 50 Hz Power consumption: 1100W max. Hedging: 10A air volume flow 150 m³/h Sound pressure level: 3 m distance max. 48 dB(A) Max. differential pressure Vacuum: 170 mbar Pressure: 190 mbar Weight: 15 kg Dimensions H x W x D: 507 x 390 x 455 mm Control panel: • Electronics with full-text display to show the device status. • Bar graph and LED for reading the back pressure. • Display: Operating hours • On/off switch • Device socket with fuse (max. 8 A) • 2-fold temperature monitoring • Safety shutdown in case of overload • calibrated energy meter (MID compliant), can be read without power Swiss plug: Yes Guarantee: 2 years, housing 5 years

Read more less

The VP6 sound boxes are suitable for intensive use in water damage drying. They generate pressure that can be used for both suction and blowing. They work with air-cooled side channel compressors in the robust AERCUBE housing. Thanks to various handle and carrying options, the devices have excellent handling properties. A lashing system creates additional stability during transport or storage  Features and Benefits Air-cooled side channel compressor, vibration-damped mounting 1280 W motor power For drying areas of approx. 50 – 70 m² Intelligent E.DRY electronics with full-text display Bar graph and multi-colored LED for reading the back pressure Operating and kWh meters can be read without electricity Very quiet thanks to highly efficient sound insulation technology Easy-to-open safety quick-release fasteners Various grip and carrying options Extremely robust AERCUBE housing Integrated cable winder with magnetic plug holder  All AERCUBE system components are 100% compatible with each other and stackable. Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use. Technical data Tension: 1 x 230V / 50 Hz Power consumption: 1280W max. Hedging: 10A air volume flow Level 1: 80 m³/h up to 15m² Level 2: 140 m³/h up to 30m² Level 3: 190 m³/h up to 50m² Level 4: 250 m³/h up to 70m² Sound pressure level: 1 m distance max. 61 dB(A) (night mode: 57dB(A) 3 m distance max. 57 dB(A) (night mode: 54dB(A) Max. differential pressure Vacuum: 220 mbar Pressure: 270 mbar Weight: 15 kg Dimensions H x W x D: 507 x 390 x 455 mm Operating temperature: 0°C to +38°C Control panel: • Electronics with full-text display to show the device status. • Bar graph and LED for reading the back pressure. • Display: Operating hours • On/off switch • Device socket with fuse (max. 8 A) • 2-fold temperature monitoring • Safety shutdown in case of overload • calibrated energy meter (MID compliant), can be read without power Swiss plug: Yes Guarantee: 2 years, housing 5 years

Read more less