The silencer "SD2" is an element of the Aerial-Aercube series. It can be integrated into the Aercube drying system and reduces the operating noise by up to 19 dB(A), which can be particularly helpful in residential properties. An optional activated carbon filter can also be inserted into the housing to reduce odors. Advantages and Features • Reduces operating noise by up to 19 dB • Reduces odors when using the optional activated carbon filter • Suitable for Ø 38 mm and Ø 50 mm hose systems • Ready to connect with up to 270 m³/h air flow • Easy-to-open safety quick-release fasteners • Various grip and carrying options • Robust AERCUBE housing The SD2 does not require its own power connection. It is suitable for continuous operation and can be combined with all elements of the Aercube system.   All AERCUBE system components are 100% compatible with each other and stackable. Technical data Tension: does not require electricity Air flow: up to 300m³/h Weight: 6 kg Dimensions H x W x D: 300 x 390 x 490mm Operating temperature: -10°C - +40°C Guarantee: 2 years, housing 5 years

Read more less

The water separator "VT2" is an element of the Aerial-Aercube series. It can be integrated into the Aercube drying system in combination with the sound boxes VP2 - 6, for example to extract standing water from under subfloors. Suitable for both clean and dirty water. The suction pressure is thus generated by the sound boxes. Inside the "VT2" there is a level controller and a Grundfos pump, which automatically pumps out the water that has been sucked in at intervals as soon as a certain level is reached. The waste water container holds 20 liters. Thanks to the closed housing construction, the "VT2" can even be used in standing water up to a maximum depth of 30 cm. Two safety locks prevent water from getting into the device. After use, the remaining water can be completely drained using a drain screw. Cleaning the device is very easy. The "VT2" is controlled by EDry electronics. The following elements are located on the control panel: • On/off switch. • "Info" button: to query the total amount of water pumped since the last switch-on (tamper-proof). • Fuse device socket 16A. • Device socket (to control the sound box). • Button for pumping out the remaining water. • LED display for querying flow rates, time of last pumping, etc. Features and Benefits • Powerful dirty water pump for industrial applications. • Discharge head of waste water up to max. 7 m. • Full text display shows all important operating states. • Drain plug for easy drainage of residual water. • Easy-to-open safety quick-release fasteners. • Various grip and carrying options. • Robust AERCUBE housing. • Display of the amount of water pumped out (total and per construction site as well as the time of the last pumping process). • Electronic level control. • Manual pumping at the touch of a button. • suitable for continuous operation.   All AERCUBE system components are 100% compatible with each other and stackable. Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use. Technical data Tension: 230 V / 50 Hz Recording: 380W Weight: 18 kg Dimensions H x W x D: 507 / 390 / 490 mm Operating temperature: +3°C to +38°C feed pump: Grundfos CC7 lifting height max. 7m flow rate 9 m³/h container volume: 20 liters Protection class: IP44 Guarantee: 2 years (5 years housing)

Read more less

The new WT230D is a successful development of its predecessor, the WT230U. It is a little more powerful in terms of dehumidification performance and, with significantly lower consumption, is at the forefront in terms of efficiency. An ideal device for single-family homes in combination with a tumble dryer. service The device is very easy to operate using the easy-to-understand digital controls on the front. The display provides the current information about the room status and the selected program. The display languages ​​available are German, French, Italian and English. Drying programs: The laundry drying program can be started at the touch of a button. The dehumidifier runs until the laundry is dry and then switches off automatically. With the help of three pre-programmed drying levels, you can choose between partially dry, iron-dry or cupboard dry. All pre-programmed moisture values ​​can be changed at any time according to your own wishes. The dryer also has a general room monitoring function to prevent mold and odors in the basement. The device switches on automatically whenever the room humidity rises above the mold and odor limit of 60% RH. This humidity value can also be changed as desired. Unlike the laundry drying programs, the dryer never switches off completely in this mode, but only pauses as long as the humidity is right. If the humidity rises again, the drying mode switches back on. In both programs, both the current humidity and the target humidity are visible on the display. Blower and fan speeds: The blower is an electronically operated, economical radial fan. The dry air jet goes slightly downwards from the outlet, which means that the air is blown into the lower part of the laundry, where the laundry is normally the wettest. This falling wind tunnel is also very practical if you set up a clothes rack in front of the device. Selectable fan settings: The WT tumble dryers are the only devices of this type where the fan setting can be regulated. Even the weaker setting has a very respectable air flow, but significantly reduces the operating noise. If the laundry hanger is fully loaded, the strong fan setting is recommended in order to force the dry air through the laundry as forcefully as possible. This produces faster and more even drying results. On the strong setting, the dry air jet can also reach items of laundry that are far away, up to around 7m away. Adjustable air slats: Flexible slats are attached to the air outlet, which can be adjusted laterally and in height so that the air can be adjusted more precisely to the length/width of the clothesline. Direct hose connection: The water extracted from the laundry runs into a hose which, on the WT devices, is attached slightly below the back wall, rather than on the underside of the device as is usual. This is an advantage over other models if the gradient to the drain is not very great or if the device is to be hung a little lower. There is no pump integrated into the device, so the hose must have a constant gradient to the drain. If there is no drain, the water can of course also be easily collected in a bucket placed under the device. We have suitable inlet pipes and buckets in our range if required. Air filter: The moist room air is sucked in at the top of the front. A magnetically attached filter with a frame cleans the air of coarse dust and fluff so that the inside of the device remains clean. The filter consists of a very fine, close-meshed nylon net. This has a high cleaning power, is easy to clean and, if treated correctly, usually lasts for the entire life of the dryer. Memory function: The settings are saved in the room monitoring program. If the power is interrupted, the dryer will resume operation with the same settings. It is therefore also suitable for operation with a timer, for example if you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted. Room temperature: Technically, Aerial's WT dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimum drying speed, 15°C and higher are optimal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe: The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing institute for tumble dryers, "Swiss Testing". Service-friendly device construction: The entire cover can be removed from the device in just a few easy steps. This makes handling easier when cleaning or servicing is required, as the device does not have to be removed from the wall.  mounting on the wall As with all tumble dryers, installation is extremely simple: a mounting rail is anchored into the wall with 2 screws, and the device can then be hung up. All necessary installation material such as screws/anchors and 2m of hose is included in the scope of delivery. Both the support rail and the two buffers in the lower area of ​​the device that support the wall are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the sink using the hose if possible (hose is included in the scope of delivery). If you want to use a bucket, please ensure that it has enough capacity (at least 8 liters) to avoid overflowing while drying laundry. If mounting on the wall is not possible, you will find suitable chassis in our range to which the dryer can be mounted. If you wish, we can professionally install the dryer at your home. Price on request. Important: • Sanitary (drain) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate tradesman, if one does not already exist. • If your wall has internal insulation, we need to know this when ordering, as installation is more complex. The installation prices quoted refer to direct wall installation, i.e. directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls are charged according to the effort involved.  Technical data drying room: up to 18 m² Drying performance: 1.63 Kg/h Consumption per kg of laundry: 0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 660W or 420W (at 20°C/60% RH) Sound pressure level: 2.5 m distance 59 dB(A) 2.5 m distance 67 dB(A) fan speed 2 (our measurement) Examples of dehumidification performance and consumption: at 30°C / 80% RH = 35.5 liters / 24h (power consumption: 569 W) at 27°C / 60% RH = 21.1 liters / 24h (power consumption: 487 W) at 20°C / 60% RH = 14.6 liters / 24h (power consumption: 420 W) at 10°C / 70% RH = 6.1 liters / 24h (power consumption: 368 W) air circulation volume: 750 m³/h condensate tank: No integrated tank. The water is supplied via a hose connection directly into the drain or into a bucket. Compressor: rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 40 kg Operating setting: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Read more less

If you like your laundry to dry more quickly, the WT 240D is a good, powerful machine. The WT240 is the most economical of the new WT series from Aerial. A reliable helper in busy laundry rooms. service The device is very easy to operate using the easy-to-understand digital controls on the front. The display provides the current information about the room status and the selected program. The display languages ​​available are German, French, Italian and English. Drying programs: The laundry drying program can be started at the touch of a button. The dehumidifier runs until the laundry is dry and then switches off automatically. With the help of three pre-programmed drying levels, you can choose between partially dry, iron-dry or cupboard dry. All pre-programmed moisture values ​​can be changed at any time according to your own wishes. The dryer also has a general room monitoring function to prevent mold and odors in the basement. The device switches on automatically whenever the room humidity rises above the mold and odor limit of 60% RH. This humidity value can also be changed as desired. Unlike the laundry drying programs, the dryer never switches off completely in this mode, but only pauses as long as the humidity is right. If the humidity rises again, the drying mode switches back on. In both programs, both the current humidity and the target humidity are visible on the display. Blower and fan speeds: The blower is an electronically operated, economical radial fan. The dry air jet goes slightly downwards from the outlet, which means that the air is blown into the lower part of the laundry, where the laundry is normally the wettest. This falling wind tunnel is also very practical if you set up a clothes rack in front of the device. Selectable fan settings: The WT tumble dryers are the only devices of this type where the fan setting can be regulated. Even the weaker setting has a very respectable air flow, but significantly reduces the operating noise. If the laundry hanger is fully loaded, the strong fan setting is recommended in order to force the dry air through the laundry as forcefully as possible. This produces faster and more even drying results. On the strong setting, the dry air jet can also reach items of laundry that are far away, up to around 8m away. Adjustable air slats: Flexible slats are attached to the air outlet, which can be adjusted laterally and in height so that the air can be adjusted more precisely to the length/width of the clothesline. Direct hose connection: The water extracted from the laundry runs into a hose which, on the WT devices, is attached slightly below the back wall, rather than on the underside of the device as is usual. This is an advantage over other models if the gradient to the drain is not very great or if the device is to be hung a little lower. There is no pump integrated into the device, so the hose must have a constant gradient to the drain. If there is no drain, the water can of course also be easily collected in a bucket placed under the device. We have suitable inlet pipes and buckets in our range if required. Air filter: The moist room air is sucked in at the top of the front. A magnetically attached filter with a frame cleans the air of coarse dust and fluff so that the inside of the device remains clean. The filter consists of a very fine, close-meshed nylon net. This has a high cleaning power, is easy to clean and, if treated correctly, usually lasts for the entire life of the dryer. Memory function: The settings are saved in the room monitoring program. If the power is interrupted, the dryer will resume operation with the same settings. It is therefore also suitable for operation with a timer, for example if you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted. Room temperature: Technically, Aerial's WT dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimum drying speed, 15°C and higher are optimal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe: The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing institute for tumble dryers, "Swiss Testing". Service-friendly device construction: The entire cover can be removed from the device in just a few easy steps. This makes handling easier when cleaning or servicing is required, as the device does not have to be removed from the wall.  mounting on the wall As with all tumble dryers, installation is extremely simple: a mounting rail is anchored into the wall with 2 screws, and the device can then be hung up. All necessary installation material such as screws/anchors and 2m of hose is included in the scope of delivery. Both the support rail and the two buffers in the lower area of ​​the device that support the wall are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the sink using the hose if possible (hose is included in the scope of delivery). If you want to use a bucket, please ensure that it has enough capacity (at least 8 liters) to avoid overflowing while drying laundry. If mounting on the wall is not possible, you will find suitable chassis in our range to which the dryer can be mounted. If you wish, we can professionally install the dryer at your home. Price on request. Important: • Sanitary (drain) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate tradesman, if one does not already exist. • If your wall has internal insulation, we need to know this when ordering, as installation is more complex. The installation prices quoted refer to direct wall installation, i.e. directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls are charged according to the effort involved.  Technical data drying room: up to 20 m² Drying performance: 1.93 Kg/h Consumption per kg of laundry: 0.26 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 620W or 440W (at 20°C/60% RH) Sound pressure level: 2.5 m distance 62 dB(A) 2.5 m distance 68 dB(A) fan speed 2 (our measurement) Examples of dehumidification performance and consumption: at 30°C / 80% RH = 36.5 L/24h (power consumption: 570 W) at 27°C / 60% rH = 21.6 L/24h (power consumption: 500 W) at 20°C / 60% rH = 16.8 L/24h (power consumption: 440 W) at 10°C / 70% rH = 7.2 L/24h (power consumption 390 W) air circulation volume: 830 m³/h condensate tank: No integrated tank. The water is supplied via a hose connection directly into the drain or into a bucket. Compressor: rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 40 kg Operating setting: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Read more less

The WT 250D is not only suitable for intensive drying tasks in single-family homes, but also meets the performance expectations in drying rooms that are shared by several parties. With a drying capacity of around 3 kg of laundry per hour, this model dries what a washing machine can wash in around 2.5 hours. service The device is very easy to operate using the easy-to-understand digital controls on the front. The display provides the current information about the room status and the selected program. The display languages ​​available are German, French, Italian and English. Drying programs: The laundry drying program can be started at the touch of a button. The dehumidifier runs until the laundry is dry and then switches off automatically. With the help of three pre-programmed drying levels, you can choose between partially dry, iron-dry or cupboard dry. All pre-programmed moisture values ​​can be changed at any time according to your own wishes. The dryer also has a general room monitoring function to prevent mold and odors in the basement. The device switches on automatically whenever the room humidity rises above the mold and odor limit of 60% RH. This humidity value can also be changed as desired. Unlike the laundry drying programs, the dryer never switches off completely in this mode, but only pauses as long as the humidity is right. If the humidity rises again, the drying mode switches back on. In both programs, both the current humidity and the target humidity are visible on the display. Blower and fan speeds: The blower is an electronically operated, economical radial fan. The dry air jet goes slightly downwards from the outlet, which means that the air is blown into the lower part of the laundry, where the laundry is normally the wettest. This falling wind tunnel is also very practical if you set up a clothes rack in front of the device. Selectable fan settings: The WT tumble dryers are the only devices of this type where the fan setting can be regulated. Even the weaker setting has a very respectable air flow, but significantly reduces the operating noise. If the laundry hanger is fully loaded, the strong fan setting is recommended in order to force the dry air through the laundry as forcefully as possible. This produces faster and more even drying results. On the strong setting, the dry air jet can also reach items of laundry that are far away, up to around 9m away. Adjustable air slats: Flexible slats are attached to the air outlet, which can be adjusted laterally and in height so that the air can be adjusted more precisely to the length/width of the clothesline. Direct hose connection: The water extracted from the laundry runs into a hose which, on the WT devices, is attached slightly below the back wall, rather than on the underside of the device as is usual. This is an advantage over other models if the gradient to the drain is not very great or if the device is to be hung a little lower. There is no pump integrated into the device, so the hose must have a constant gradient to the drain. If there is no drain, the water can of course also be easily collected in a bucket placed under the device. We have suitable inlet pipes and buckets in our range if required. Air filter: The moist room air is sucked in at the top of the front. A magnetically attached filter with a frame cleans the air of coarse dust and fluff so that the inside of the device remains clean. The filter consists of a very fine, close-meshed nylon net. This has a high cleaning power, is easy to clean and, if treated correctly, usually lasts for the entire life of the dryer. Memory function: The settings are saved in the room monitoring program. If the power is interrupted, the dryer will resume operation with the same settings. It is therefore also suitable for operation with a timer, for example if you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted. Room temperature: Technically, Aerial's WT dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimum drying speed, 15°C and higher are optimal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe: The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing institute for tumble dryers, "Swiss Testing". Service-friendly device construction: The entire cover can be removed from the device in just a few easy steps. This makes handling easier when cleaning or servicing is required, as the device does not have to be removed from the wall.  mounting on the wall As with all tumble dryers, installation is extremely simple: a mounting rail is anchored into the wall with 2 screws, and the device can then be hung up. All necessary installation material such as screws/anchors and 2m of hose is included in the scope of delivery. Both the support rail and the two buffers in the lower area of ​​the device that support the wall are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the sink using the hose if possible (hose is included in the scope of delivery). If you want to use a bucket, please ensure that it has enough capacity (at least 8 liters) to avoid overflowing while drying laundry. If mounting on the wall is not possible, you will find suitable chassis in our range to which the dryer can be mounted. If you wish, we can professionally install the dryer at your home. Price on request. Important: • Sanitary (drain) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate tradesman, if one does not already exist. • If your wall has internal insulation, we need to know this when ordering, as installation is more complex. The installation prices quoted refer to direct wall installation, i.e. directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls are charged according to the effort involved.  Technical data drying room: up to 35 m² Drying performance: 2.95 Kg/h Consumption per kg of laundry: 0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 950W or 677W (at 20°C/60% RH) Sound pressure level: 2.5 m distance 61 dB(A) 2.5 m distance 68 dB(A) fan speed 2 (our measurement) Examples of dehumidification performance and consumption: at 30°C / 80% rH = 57.1 Ll/24h (power consumption: 570 W) at 27°C / 60% RH = 24.1 L/24h (power consumption: 500 W) at 20°C / 60% rH = 23.0 L/24h (power consumption: 440 W) at 10°C / 70% RH = 13.4 L/24h (power consumption: 390 W) air circulation volume: 950 m³/h condensate tank: No integrated tank. The water is supplied via a hose connection directly into the drain or into a bucket. Compressor: rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 42 kg Operating setting: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Read more less

The hardest worker among the new Aerial WT dryers! It is specially built for intensive use and dries laundry quickly and reliably while being easy to operate. With a drying capacity of around 3.6 kg of laundry per hour, this model dries what a washing machine can wash in around 2 hours. service The device is very easy to operate using the easy-to-understand digital controls on the front. The display provides the current information about the room status and the selected program. The display languages ​​available are German, French, Italian and English. Drying programs: The laundry drying program can be started at the touch of a button. The dehumidifier runs until the laundry is dry and then switches off automatically. With the help of three pre-programmed drying levels, you can choose between partially dry, iron-dry or cupboard dry. All pre-programmed moisture values ​​can be changed at any time according to your own wishes. The dryer also has a general room monitoring function to prevent mold and odors in the basement. The device switches on automatically whenever the room humidity rises above the mold and odor limit of 60% RH. This humidity value can also be changed as desired. Unlike the laundry drying programs, the dryer never switches off completely in this mode, but only pauses as long as the humidity is right. If the humidity rises again, the drying mode switches back on. In both programs, both the current humidity and the target humidity are visible on the display. Blower and fan speeds: The blower is an electronically operated, economical radial fan. The dry air jet goes slightly downwards from the outlet, which means that the air is blown into the lower part of the laundry, where the laundry is normally the wettest. This falling wind tunnel is also very practical if you set up a clothes rack in front of the device. Selectable fan settings: The WT280 has a (powerful) fan setting. This provides fast drying results, even with a lot of laundry and long drying rooms of up to approx. 10m. Adjustable air slats: Flexible slats are attached to the air outlet, which can be adjusted laterally and in height so that the air can be adjusted more precisely to the length/width of the clothesline. Direct hose connection: The water extracted from the laundry runs into a hose which, on the WT devices, is attached slightly below the back wall, rather than on the underside of the device as is usual. This is an advantage over other models if the gradient to the drain is not very great or if the device is to be hung a little lower. There is no pump integrated into the device, so the hose must have a constant gradient to the drain. If there is no drain, the water can of course also be easily collected in a bucket placed under the device. We have suitable inlet pipes and buckets in our range if required. Air filter: The moist room air is sucked in at the top of the front. A magnetically attached filter with a frame cleans the air of coarse dust and fluff so that the inside of the device remains clean. The filter consists of a very fine, close-meshed nylon net. This has a high cleaning power, is easy to clean and, if treated correctly, usually lasts for the entire life of the dryer. Memory function: The settings are saved in the room monitoring program. If the power is interrupted, the dryer will resume operation with the same settings. It is therefore also suitable for operation with a timer, for example if you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted. Room temperature: Technically, Aerial's WT dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimum drying speed, 15°C and higher are optimal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe: The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing institute for tumble dryers, "Swiss Testing". Service-friendly device construction: The entire cover can be removed from the device in just a few easy steps. This makes handling easier when cleaning or servicing is required, as the device does not have to be removed from the wall.  mounting on the wall As with all tumble dryers, installation is extremely simple: a mounting rail is anchored into the wall with 2 screws, and the device can then be hung up. All necessary installation material such as screws/anchors and 2m of hose is included in the scope of delivery. Both the support rail and the two buffers in the lower area of ​​the device that support the wall are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the sink using the hose if possible (hose is included in the scope of delivery). If you want to use a bucket, please ensure that it has enough capacity (at least 8 liters) to avoid overflowing while drying laundry. If mounting on the wall is not possible, you will find suitable chassis in our range to which the dryer can be mounted. If you wish, we can professionally install the dryer at your home. Price on request. Important: • Sanitary (drain) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate tradesman, if one does not already exist. • If your wall has internal insulation, we need to know this when ordering, as installation is more complex. The installation prices quoted refer to direct wall installation, i.e. directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls are charged according to the effort involved.  Technical data drying room: up to 40 m² Drying performance: 3.68 Kg/h Consumption per kg of laundry: 0.29 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 1350W or 950W (at 20°C/60% RH) Sound pressure level: (our measurement) 2.5 m distance 67 dB(A)  Examples of dehumidification performance and consumption: at 30°C / 80% rH = 79.2 L/24h (power consumption: 1390 W) at 27°C / 60% rF = 46.6 L/24h (power consumption: 1080 W) at 20°C / 60% rH = 32.2 L/24h (power consumption: 990 W) at 10°C / 70% RH = 20.3 L/24h (power consumption: 800 W) air circulation volume: 950 m³/h condensate tank: No integrated tank. The water is supplied via a hose connection directly into the drain or into a bucket. Compressor: rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 43 kg Operating setting: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Read more less

Very powerful dehumidifier for demanding dehumidification tasks in a temperate environment. Ideal for drying water damage, for building drying for larger or very humid rooms. Due to its high performance, this dryer is only available with a hose connection, i.e. without a water tank. The device is also ideal for construction sites and for drying wood.   Dehumidification capacity of up to 100 liters per day Overview of the approximate dehumidification quantities in liters per day at different room temperatures and humidity: 30°C: 80% moist: 100 liters (60%: 47 L.) 20°C: 80% moist: 47 liters (60%: 27 L.) 15°C: 80% moisture: 35 liters (60%: 19 L.) 10°C: 80% moisture: 19 liters (60%: 13 L.) Quality product, which is mostly sold through specialist retailers throughout Europe. Quality standards include: durability, compliance with the specified performance, CFC-free, TÜV + GS + EMC + CE tested, ISO certified, recyclable materials, etc. Devices with comparable performance usually cost several times more. Characteristics • Dehumidification capacity of up to 120 liters per day • Electric hygrostat (LED) for regulating and setting the desired humidity • Function for continuous operation/continuous dehumidification; • Memory function for saving data and for automatic continuation of operation after a power failure • Clear display including actual humidity, target humidity and status overview • separate consumption meter kWh • Equipped with a highly efficient rotary compressor. This TÜV and CE tested compressor is one of the most powerful compressors on the market • Automatic professional defrost function • Humidity control of seamless 1% steps between 30% - 90% (plus continuous operation function) • Powder-coated metal housing/metal frame • Very easy mobility thanks to transport handles and large wheels for safe travel over steps and uneven ground. However, note the weight (60kg). • Operating warning light / defrost light • Maintenance-free / No separate or renewed coolant is required (closed circuit) • Air filter grille that can be cleaned • The device is ready for use immediately (no installation or assembly required). • Swiss plug 230 V • CFC free and compliance with WEEE standards usage examples Construction dryer: Ideal for quickly drying concrete, basements, plaster, screed, water damage, etc. Damage repair: After flooding or damage caused by extinguishing water, these devices are ideal for drying (professionals as well as insurance companies use these devices.) Climate control: For all rooms, halls as well as for use at work and for hobbies, etc. Important The powerful compressor operates at a noise level of around 70 dB and is therefore not suitable for use in noise-sensitive areas. The fuses must release 9 amps or more, which is usually the case with a normal socket. At temperatures below 10°C the Akto1200 can freeze. In cold environments we recommend the model Fral F96 -> Construction dryer F96 as an alternative.     Technical data   Tension 220-240V / 50Hz power consumption max. 1840W (8.3 A) / 1560W (7.1 A) (at 20°C/60% RH) sound pressure level 1 m distance 70 dB(A) 2.5m distance 67 dB(A) (our measurement) dehumidification performance 100 liters/day (30°C / 80% RH) amount of recirculated air 1000 m³/h (free blowing) condensate tank No tank / only hose connection possible compressor rotary compressor refrigerant R454C (1kg), GWP: 148 Dimensions (H x W x D) 1110 x 630 x 470 mm Weight 60 kg cessation of operations predefined values ​​at the touch of a button / digital display ambient temperature 10°C ~ 32°C (our recommendation) application area Rooms from min. 4m² to max. 300m² (750m³) Swiss plug Yes hose connection Yes operating hour meter Yes guarantee 2 years series WDH-1200HT

Read more less

The Akto930 is a powerful, elegant dehumidifier for private use. Thanks to the combination of strong dehumidification performance and a fan with a lot of circulating air, it is able to keep even larger basement areas dry from one location. For its dehumidification class, the dryer is comparatively light and handy at 15 kg.     Features & Benefits • Powerful dehumidification performance and respectable fan • With WLAN/WIFI function • Electric hygrostat (LED) for regulating and setting the desired humidity • Clear display including current temperature display, actual humidity and status overview • Timer function to limit the operating time or to automatically start operation 1-24 hours in the future. • Also suitable for continuous operation/continuous dehumidification • Two fan/air circulation levels (weak + strong) • Automatic Profi Defrost function (hot gas defrosting) for increased efficiency • Power consumption of only 430 watts at 20°C/60% RH • Equipped with a very reliable quality brand compressor with software-controlled compressor protection. • Humidity control from 30% to 90% • Auto-stop when tank is full including warning light • Removable condensate tank • Connection option of a hose for direct drainage of the condensate (hose is included in delivery) • Operating warning light • Absolutely maintenance-free / No separate or renewed coolant is required (closed circuit) • Very easy mobility thanks to (not very robust) side handles and, if required, screw-on castors • Washable antibacterial air filter • Modern design and attractive appearance • The dehumidifier is ready for use as a freestanding unit (no assembly required); the wheels included in the delivery can be easily screwed on if required. • CFC free and compliance with WEEE standards • TÜV, CE, EMC and GS tested Direct hose connection The water extracted from the air is collected in the inserted bucket as standard, with a float automatically stopping operation when it is full. Alternatively, the water can also be drained via the direct hose connection on the back of the device. The delivery includes a short piece of hose that can be attached directly to the cover without any accessories. If the hose should be longer, you will need a standard 3/4-inch plastic coupling and a matching hose with an inner diameter of 16 mm (available from us or from any hardware store). Software-controlled compressor protection If the current operation is interrupted manually (for example by removing the bucket), the compressor and ventilation will only start again when the coolant has settled sufficiently into the compressor. This takes a few minutes, but significantly extends the life of the dryer. timer The timer can be used in two ways: If you set the timer when the appliance is switched on , the operating time can be limited to 1-24 hours "from now on". The appliance then switches to standby. This function is useful, for example, when drying laundry if you have experience of how long it will take to dry the laundry.   If you set the timer when the appliance is switched off (standby), you can delay the switch-on time by 1-24 hours. This function is useful if you want to schedule the drying process to take place when electricity is cheaper at night. It is not possible to operate this dehumidifier using a timer. usage examples Cellar damp : Ideal for damp cellars, old walls and laundry rooms. Eliminates musty smells, stops mold growth, decomposition of masonry and much more. Mobile clothes dryer : the device is also very popular as a mobile clothes dryer. Close the laundry room windows and doors and, depending on the size of the laundry room, the laundry will dry overnight. dehumidification performance Thanks to hot gas defrosting, the dryer can be used over a wide temperature range between +5°C and +35°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C: 80% moisture: 35 liters / 24h (90%: 37 liters, 60%: 18 liters) 20°C: 80% moisture: 18 liters / 24h (90%: 21 liters, 60%: 11 liters) 15°C: 80% moisture: 14 liters / 24h (90%: 17 liters, 60%: 8 liters) 10°C: 80% moisture: 9 liters / 24h (90%: 12 liters, 60%: 6 liters) 5°C: 80% moisture: 8 liters / 24h (90%: 9 liters, 60%: 5 liters)   Technical data  Tension 230V / 50 Hz power consumption max. 495 W or 400 W (at 20°C/60% RH) sound pressure level 1 m distance, fan level 1/2: 51/52 dB(A) 2.5 m distance, fan level 1/2: 48/49 dB(A) (our measurement) dehumidification performance max. 35 liters/day (30 °C / 80% RH) condensate tank Approx. 5.5 liters compressor rotary compressor refrigerant R290 (125gr.) Dimensions (H x W x D) 545 x 340 x 250 mm Height without wheels: 510 mm Weight 15 kg cessation of operations Digital with display ambient temperature 5 °C ~ 35 °C application area  For general room dehumidification: for room sizes between 4 - 90 m² Laundry drying: for fully loaded drying rooms: up to 15 m² Swiss plug Yes hose connection Yes operating hour meter No guarantee 2 years

Read more less

This air conditioning system does not require an external unit. It is mounted on the interior wall and the air is exchanged to the outside through holes in the wall. Ideal for areas with regulations regarding the townscape, such as old towns or protected buildings. • 2.4 kW cooling and heating capacity • Cooling, heating, ventilating, dehumidifying • Wi-Fi with own app This plug-in compact device does not require an external unit. It can be used as a cost-effective solution for use in hotel rooms, offices, bedrooms and in various container applications for schools or temporary accommodation. Thanks to inverter technology, it is economical and quieter than models of a similar design. assembly The device is mounted on an outside wall in the room. On the back there is an opening through which outside air is sucked in and an opening through which the warm air is blown out (or in heating mode: cold air is blown out). Before the system can be installed, two core holes must be drilled into the wall , which are designed to fit these openings. You can find the details in the installation instructions in the "Downloads" section on this page. cooling and heating Thanks to heat pump technology, the "Apollo" can be used both for cooling and for economical heating of rooms. The appropriate function is selected at the touch of a button. program functions It is easy to operate and can be done either on the display of the device itself or via the WLAN function on a mobile phone or tablet. “Eco” function: for lower consumption “Turbo” function: desired temperature in the shortest possible time “Anti-Cold Wind” function in heating mode: The air is only released into the room when it is sufficiently warmed up “Sleep” function: Optimizes the operation of the air conditioner during the night hours Autodiagnosis function: Display of errors on the device display for easy troubleshooting Features and Benefits • Ideal for a room size of 70m³ • Remote-controlled WiFi with its own app • 4 in 1: cooling, heating, dehumidifying, ventilating • Energy efficiency class A in cooling mode and heating mode • Automatic swivel movement or individually adjustable position of the air baffle (flap) to optimally direct the air flow in the room • Programmable timer ON/OFF 24h • 2 holes in the wall and unobtrusive aesthetics • Type of condensate drain: via external or internal pipe • DC inverter technology, maximum comfort, minimum consumption • Ventilation speeds: 3 + Auto Technical data Cooling capacity: 2400 W / 8530 BTU/h Heating power: 2400 W / 8530 BTU/h Recommended room size: 70 m³ Energy efficiency class: A Housing color: white Refrigerant: R32 (0.39 kg) Noise level indoor unit: 56 dB(A) Dimensions (H x W x D): 615 x 965 x 200 mm Net weight: 36.2 kg Warranty: 24 months

Read more less

A recommended mobile air conditioning unit with exhaust hose for quickly cooling workplaces, living rooms and bedrooms during the warm season.  The device is easy to operate on the device itself or via remote control. The exhaust air is led out of the room using the hose provided, e.g. out the window or through the balcony door. On the front of the housing is the powerful, 3-stage fan with slats, which are either fixed in one direction or use the swing function to fan the outgoing cold air vertically.     Design / Scope of delivery • White plastic housing • Control panel with display of the desired temperature and the current room temperature • 4 rollers • Remote control • Extendable exhaust hose approx. 1.20m (with narrowing attachment for tilt windows) • Cable approx. 1.50 m with Swiss plug (normal socket 230V / three-pin) • multilingual user manual including German, French, Italian • Energy class A. • Environmentally friendly refrigerant R290   Once the target temperature is reached, the device stops cooling (the ventilation always runs, as with most air conditioning units) and switches back on automatically when the room air warms up again (selectable range: 16°-32°C). The air conditioning can be limited to a timer of 1 - 24 hours in operation, but can also be programmed 1-24 hours in the future so that it switches on automatically, for example, 1 hour before you return or before you go to bed. memory function After a power failure, operation is automatically resumed with the same settings. This model is therefore also suitable for operation with a timer. Not suitable for year-round cooling of server rooms. As with all mobile air conditioning units, the ventilation and motor of the "Crono" are clearly audible, although noticeably quieter than units with comparable performance.         Technical data   functions Cooling, dehumidifying, ventilating energy class A (cool) cooling capacity 2640 W / 10000 BTU/h consumption cooling mode 1010 W Suitable for rooms up to 24m² air volume max. 350m³/h fan 3-stage selectable temperature 16 - 32° C Ø exhaust hose inside/outside 14 / 15 cm (length 150 cm) refrigerant R290 power connection 230V / 50 Hz shipping weight 22 kg Dimensions (H x W x D) 713 x 365 x 355 mm noise level Our measurement: 1.0 m distance fan level 1/3: 54 / 58 dB(A) 2.5 m distance fan level 1/3: 51 / 55 dB(A) guarantee 2 years

Read more less

In our opinion, this is the best portable air conditioner on the market. The slightly higher price is justified for anyone who values ​​appearance, comfort and operating noise.  In principle, the "Milo" is a free-standing air conditioning unit, the exhaust air of which is led either out the window or into a neighboring room via a hose. It has a powerful fan with slats on the top of the housing, which can either be locked in one direction or use the swing function to fan the cold air out vertically. Despite a lot of recirculated air, the operating noise is quieter than with other devices in this category, although as with all mobile air conditioning units, it is still clearly noticeable. Once the desired temperature is reached, the device stops cooling (or heating in heating mode) until the temperature changes again. As with most air conditioning units, the ventilation is always running to circulate the air in the room as best as possible. The selectable temperature range is from 16 to 30°C. The timer can be used to limit the operating time to between 1 and 24 hours. You can also program a start time for operation 1-24 hours in the future, so that it switches on automatically, for example, 1 hour before you return or before you go to bed. The following features distinguish the "Milo Plus" from commercially available devices: Maintain a constant temperature Basically, you can choose whether the device cools or heats. In "Auto" mode, however, you can also select a desired constant temperature. If the room temperature falls below this, the system runs in heating mode; if it is above this, it automatically switches to the cooling function. This option is very rare with mobile devices.   WIFI function All functions can be conveniently controlled via WiFi using an app. Of course, the device can also be controlled traditionally using the keyboard or the remote control that is also included in the delivery.    "I feel" function on the remote control As with more expensive split systems, the remote control has the so-called "I-Feel function". With this function, the temperature is not measured on the device, but on the remote control. This means that it is best to place the remote control near you, for example on the sofa (the device must be in visual contact with the remote control) and you will then have the perfect temperature where you want it. parental controls If necessary, the child lock can be activated to prevent children from changing the settings. mold protection "X-FAN" (only on remote control) With this function, the ventilation continues to run for 2 minutes after cooling or dehumidification. This dries out the still damp interior of the device and prevents the formation of mold in the device. memory function After a power failure, operation is automatically resumed with the same settings. This model is therefore also suitable for operation with a timer. environmentally friendly refrigerant R290 The green idea is also taken into account: The "Milo Plus" is equipped with the latest refrigerant R290, which is practically climate-neutral. The R290 hardly pollutes the environment, or in numbers: 600 times less than the previous products that were used until recently. Of course, an air conditioning unit, even with the latest refrigerant, will never be as environmentally friendly as jumping into cold water or continuing to sweat undeterred. Design / Scope of delivery • White plastic housing • Control panel with display of the desired temperature and the current room temperature • 4 rollers • Remote control • Extendable exhaust hose approx. 1.20m (with narrowing attachment for tilt windows) • Cable approx. 1.50 m with Swiss plug (normal socket 230V / three-pin) • Multilingual user manual including German, French, Italian • Energy class A in cooling mode, A++ in heating mode. • Environmentally friendly refrigerant R290   Not suitable for year-round cooling of server rooms. As with all mobile air conditioning units, the ventilation and motor of this unit are clearly audible, although noticeably quieter than units with comparable performance, especially on the lowest fan setting.     Technical data  Features: Cooling, heating, dehumidifying, ventilating Energy class: A (cooling), A++ (heating) Cooling capacity: 3500 W / 13000 BTU/h Consumption cooling mode: 1300 W Heating power: 3500 W / 13000 BTU/h Consumption heating mode: 1100W Suitable for rooms up to 30m² air volume: max. 380m³/h fan 3-stage selectable temperature: 16 - 30° C Ø exhaust hose inside/outside: 14 / 15 cm (length 120 cm) refrigerant: R290 power connection: 230V / 50 Hz Shipping weight: 36 kg Dimensions: Height x Width x Depth: 835 x 385 x 405 mm Noise level: Our measurement: 1.0 m distance fan level 1/3: 52 / 56 dB(A) 2.5 m distance fan level 1/3: 49 / 53 dB(A) Guarantee: 2 years

Read more less

The Ulisse 13DCI closes the gap between mobile monoblock air conditioning units and permanently installed split air conditioning units. It is portable, with the indoor and outdoor units connected by a cooling line. The outdoor unit is placed on the terrace, for example, or can be hung on an outside wall, while the indoor unit is placed in the room or office to be cooled. The advantage of this air conditioning system compared to monoblock air conditioning units is the quiet operating noise and significantly better energy efficiency. The 13DCI works with the latest inverter technology, which means that the performance of the compressor adapts to the effective cooling requirement and therefore does not always run at full power. The setting is simple and convenient using the remote control included in delivery. The target temperature can be selected in 1°C increments between 10°C and 32°C. As with all air conditioning units, whether low target temperatures are actually achieved depends on the size of the room and the amount of heat that enters the room, e.g. from sunlight or devices in the room. "I Feel" function: The device has two measuring points. One on the device itself, a second is on the remote control. With the so-called "I Feel" button, the remote control measures the temperature and controls the air conditioning unit. This means you can put the remote control next to you on the sofa, for example, and always have the optimal temperature wherever you are. The only requirement for the "I Feel" function is direct visual contact between the remote control and the indoor unit. The warm air is sucked in at the front of the indoor unit, cooled and blown into the room at the top front. During the cooling process, excess water is simultaneously removed from the air. This is also fed together with a hose through the connecting line from the indoor to the outdoor unit in front of the fan, where it is automatically nebulized. Important to know when using mobile split air conditioners • The indoor and outdoor units are connected with a copper cooling pipe. Copper is not reversible, which means: if the copper pipe is kinked, it is destroyed and must be replaced (cost for a 2m pipe: CHF 310.-). • If the pipe between the indoor and outdoor units is to be routed through a hole (eg in the wall), it must be separated from the outdoor unit. This requires knowledge of how to handle refrigerant pipes and should be done by a specialist. Otherwise, it is likely that coolant will escape during the separation process, thereby reducing the cooling performance. We have appropriately trained specialists and can offer you both delivery and installation.    Scope of delivery split air conditioning 13dci • Mobile air conditioner WITH WIFI function • Indoor and outdoor unit with 2m cooling line (already connected and ready for use) • Remote control • Cable approx. 2.30 m with Swiss plug (normal socket 230V / three-pin) • User manual in German + IT / FR / EN + other languages latest series We offer the latest series with environmentally friendly R32 refrigerant. The optional extension lines are available with the old R410A or the new R32. When ordering lines, please note which refrigerant is used in your device. Optional accessories extension cables • The length of the cooling line, which is included in the scope of delivery, is 2m. If required, this can be extended with extension lines of 2m or 4m up to a maximum of 6m. wall mount for outdoor unit • If you would like to mount the outdoor unit on a wall, a suitable wall bracket is optionally available from us (CHF 49.-).     SEER: 5.2  Technical data  energy efficiency class A operating modes cooling, ventilation For rooms up to max. 40m² (depending on heat sources) cooling capacity 3920 W / 13340 BTU/h connection voltage 230 Volt - 50 Hz temperature setting range 10° - 32° C power consumption 1600 W Dehumidification capacity approx. 1.9 L/h coolant R32 Operating noise dB(A) (min/max) 37 - 40 (our measurement) 34 - 37 (manufacturer information) air circulation (level 1-2-3) 335-375-400 m³/h service remote control cable included in delivery 2 m (ø40 mm) dimensions of the indoor unit (HxWxD) 79 x 58 x 25 cm Dimensions of the outdoor unit (HxWxD) 49 x 53 x 25 cm Weight of indoor / outdoor unit 42 / 15 kg guarantee 2 years   Quick course on establishing a WIFI connection to Ulisse   Connect the device to the power supply (or unplug and reconnect) Press the on/off button for 5 seconds until the WIFI light flashes. Connect the desired device to the WLAN network «UI_Setup» On the Internet, enter and open the following: 192.168.4.1 Select the WLAN to which the Ulisse must be connected, enter the password, click on “APP Connect”. Change username and password if desired and click on «APP Connect» again Ulisse can now be served

Read more less

Powerful ventilation for construction sites, trade and industry. In combination with the optional dust bag, the blower can be used as an ideal dust eater or air purifier, even in closed rooms. This practical plastic blower (transport fan) is very robust and designed for a long service life. The housing is made of almost indestructible "Linear Rotational Plastic". The device has a practical carrying handle and a long-lasting high-performance single-phase motor is installed in the device. An air hose with a diameter of 30 cm can be connected during operation and/or after operation. Alternatively, this blower also offers the option of connecting a dust bag (see accessories) in the exhaust air area, so that the fan can also be used in closed rooms as an effective dust eater/air purifier. The operating noise is roughly equivalent to that of a vacuum cleaner (77 dB(A) at a distance of 2.5 m) and is therefore clearly audible. Characteristics ? Practical connection nozzles (30 cm each) for exhaust air/supply air to which a dust bag can also be ideally attached ? High air circulation of approx. 3900 m³/h ? Very robust housing made of almost indestructible "Linear Rotational Plastic" (rotated plastic) ? Equipped with strong high-performance single-phase motor ? No adjustments in case of power failure (device continues where it was interrupted) ? Extremely good mobility due to very light and compact design and a handy carrying handle ? Stackable (two devices can be stacked on top of each other.) ? The device is ready for use immediately (no installation or assembly required)   usage examples Ventilation: Ideal for targeted ventilation of gaps, shafts and hollow floors. For ventilation/wind cooling of machines, marquees, event halls and the like. For forcing the exchange of air in rooms to remove odors, vapors and moisture. Dust extraction: In conjunction with a dust bag (accessory available from us), the device is ideal for extracting/capturing construction dust/industrial dust. Coarse and fine dust up to filter class M can be captured (e.g. sawdust, sanding dust, dust from chiseling work or from dirt particles that arise when using tile adhesive and/or other fastening components). Miscellaneous This plastic fan is very reliable. To extend its lifespan, we recommend switching the fan off briefly after approximately 8-10 hours of operation.  Technical data  Tension 230V ~ 50Hz Max. power consumption 750 W (3.3 A) air circulation 3900 m³/h fan speeds 1 protection class IP44 Cable 4m noise development at a distance of 1 m approx. 81 dB(A) at a distance of 2.5 m 77 dB(A) diameter of the air duct 30 cm Max. speed 2900 rpm Dimensions (H/W/D): 520 x 370 x 470 mm Weight 14.7 kg Swiss Edition with welded Swiss plug guarantee 2 years  

Read more less

The B100 CED is a practical, mobile oil heater for open, well-ventilated areas. The heater stands on a rack with rollers, the oil tank is already firmly attached to the roller frame. The heating output is a powerful 29kW. In contrast to indirect oil heaters (eg BV77), the B100 CED has no separation of exhaust gases and warm air.   If the temperature needs to be regulated, the optional TH5 thermostat can be connected directly, which monitors the room temperature and keeps it constant.   The oil tank is integrated into a rack with wheels underneath the heater. It holds 44 liters. With a consumption of 2.7 liters per hour, this results in independent heating operation for 16 hours per tank filling. A standard 230 household socket must be available to operate the fan. As with all heaters of this type, the operating noise is clearly audible at 82 dB(A).   Product features: • Large air passage • Connection of an additional room thermostat possible • Two oil filters: oil tank filter and intake filter • Motor with overheating protection • Electronic flame control with photocell • Stainless steel combustion chamber • Oil tank with level indicator • Chassis included • Easily portable • Easy maintenance • Robust and durable construction 2-year warranty   Technical data Master B100 CED Dimensions L x W x H mm: 1075 x 480 x 600 Weight: 23 kg Housing color: metal yellow powder-coated Air flow rate: 800 m3/h Heating output: 29 kW Power consumption: 230W (fan) Fuse: 1.0 A Motor voltage: 220-240V / 50Hz Operating noise: 82 dB(A) Tank capacity: 44 liters Fuel: Diesel / Kerosene Consumption per hour: 2.7 liters (= 2.3 kg oil) Operation with full tank: 16 hours Protection class: IP41

Read more less

The premier class of professional fan heaters! This fan heater is very powerful at 18kW and is powered by high voltage from a CEE32A socket. It is extremely robust and has a powerful, channeled jet of warm air with a long throw. The fan has a single on/off setting; on the 18kW heating setting, the temperature difference between the air drawn in and the air blown out is around 50°C, and this with an air volume of around 1700 m3 per hour! The heating output can be selected in two stages: 9 kW / 18 kW. A connectable room thermostat for regulating the desired room temperature and hoses for directing the blown-out air are optionally available. The weight is 27 kg, and a guide bar and two large rollers are attached to the housing for easy maneuvering (the bar and rollers must be assembled quickly). This professional fan heater is ideal for a variety of applications: • Heating of construction sites, even in unattended continuous operation • Heating of marquees • Heating of garages, industrial and production halls • Heating smaller rooms to high temperatures by blowing in warm air via a hose • etc. The heater has an overheating protection and a safety thermostat, which activates the ventilation at intervals after switching off until the heater has cooled down sufficiently. The device is supplied with a connected power cable with a 4.0mm2 cable cross-section (length approx. 1.5 m with CEE32A plug).     Characteristics • Manual reset switch • Connection of a room thermostat possible • No oxygen consumption • Odorless, no exhaust fumes, no condensation • Winter-summer switch (ventilation mode) • Motor with thermal protection • Overheat thermostat • Made in Italy Miscellaneous: • Requires a CEE32A socket for operation (red round socket with approx. 7.1 cm outer diameter). • Short assembly required before use. • Matching extension cables in various lengths are available from us at reasonable prices. What is the benefit of the automatic reset function?  If a fan heater in the control unit measures a temperature that is too high, an overheating protection is triggered. In this case, the ventilation runs, but the heating is interrupted. In cheaper models, this protection must be mechanically unlocked. This is normally done by pressing the release switch ("reset" switch) using a pointed object. In this heater, the protection is automatically unlocked as soon as the measured temperature in the control unit returns to the normal level. Since not all users are aware of this process, the automatic reset function is a great advantage in practice.    How much heat do I need?   Our free heat requirement calculator helps you determine the required heating output for your rooms. Click here to go to the online calculator: Calculate heat requirement     Technical data   Voltage: 400V / 50 Hz Power consumption: 3 levels Ventilation only / 9 kW / 18 kW Fuse max.: 32 A Room thermostat: optional Air volume flow: approx. 1700 m³/h Protection class: IP24 (foreign body protection with Ø > 12.5 mm + splash water protection) Operating noise: 1 m distance 69 dB(A) (our measurement): 2.5 m distance 72 dB(A) Dimensions with rack (L/W/H): 700 x 490 x 530 mm Weight: 27 kg Operating setting: rotary switch off - ventilation only - 9 kW - 18 kW Application area: up to max. 180 m² / 450 m³ Plug: CEE 32 A Warranty: 2 years Special features: Not suitable for room temperatures above 25°C. Option: Room thermostat, air hoses, air distributor attachment on 2 hoses  

Read more less

The B35 CED is a practical, portable oil heater for open, well-ventilated areas. The heater and the oil tank are firmly connected to each other and can be easily transported using the practical handle. The heating output is a powerful 10kW. In contrast to indirect oil heaters (eg BV77), the B35 CED has no separation of exhaust gases and warm air.   If the temperature needs to be regulated, the optional TH5 thermostat can be connected directly, which monitors the room temperature and keeps it constant.   The oil tank holds 15 liters. With a consumption of 0.9 liters per hour, this results in independent heating operation for 16 hours per tank filling. A standard 230V household socket must be available to operate the fan. As with all heaters of this type, the operating noise is clearly audible. Product features: • Large air passage • Connection of an additional room thermostat possible • Two oil filters: oil tank filter and intake filter • Motor with overheating protection • Electronic flame control with photocell • Stainless steel combustion chamber • Oil tank with level indicator • Easily portable • Easy maintenance • Robust and durable construction     Technical data  Dimensions (L x W x H) 745 x 300 x 405 mm Weight 14 kg Color housing metal yellow powder-coated air flow 280 m 3 /h heating output 10 kW power consumption 230W (fan) insurance 0.35A motor voltage 220-240 V / 50 Hz operating noise 58 dB(A) tank capacity 15 liters fuel diesel / kerosene consumption per hour 0.9 liters (= 0.76 kg oil) operation with a full tank 16 hours protection class IP41 Cable connection cable with EU plug and Swiss fixed adapter guarantee 2 years

Read more less

An inexpensive, powerful dehumidifier with a kWh consumption meter, especially for water damage restoration and zones with permanently high humidity levels. The "35B" was specially developed to quickly dry water damage, e.g. after high water or flooding. It has a very strong dehumidification capacity, a consumption meter (kWh) and an on/off switch. A hygrostat for regulating the target humidity was deliberately omitted in this version. Recommended room size up to 90m², from 8°C. The performance and drying speed can be further accelerated with free-standing fans if required (e.g. FN45 from our range). Characteristics • Dehumidification capacity of up to 35 liters / day (at 30°C/80% RH). • Function for continuous operation/continuous dehumidification. • Calibrated (MID) consumption meter (kWh). • On/off toggle switch. • Equipped with a highly efficient rotary compressor. This compressor is one of the most powerful compressors on the market. • Automatic professional defrost function. • Removable condensate tank. • Possibility of connecting a hose for continuous drainage of the condensate. • Powder coated metal housing/metal frame. • Very easy mobility thanks to transport handles and large tires for safe travel over steps and uneven ground. • Operating warning light / defrost light. • No separate or additional coolant is required (closed circuit). • Cleanable air filter grille. • CFC free and meets WEEE standards.     usage examples Construction and industrial dryers : Thanks to their handy design, they are ideal for drying on construction sites with at least slightly temperate temperatures and in industry. Drying out water damage : Due to its powerful dehumidification performance, the 35b is often used to dry out water damage. Easy billing of consumption with insurance companies thanks to the integrated kWh consumption meter. dehumidification performance The dryer can be used over a temperature range between +8°C and +35°C, preferably in at least slightly temperate rooms from 8°C and higher. As with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C/80% RH: approx. 35 liters / 24 h (at 60% RH: approx. 18 liters) 20°C/80% RH: approx. 18 liters / 24 h (at 60% RH: approx. 11 liters 15°C/80% RH: approx. 14 liters / 24 h (at 60% RH: approx. 8 liters) 10°C/80% RH: approx. 9 liters / 24 h (at 60% RH: approx. 6 liters) (RH=relative humidity) Technical data  Tension 220-240V / 50Hz power consumption max. 450 (2.0 A) or 360W (at 20°C/60% RH) sound pressure level 56 dB(A) (manufacturer information) dehumidification performance max. 35 liters/day (30°C / 80% RH) amount of recirculated air 230 m³/h (built-in) condensate tank approx. 4.6 liters (direct hose connection possible) compressor rotary compressor refrigerant R290C (135gr.) Dimensions (H x W x D) 780 x 420 x 420 mm Weight: 22 kg Operating setting: ON/OFF toggle switch Ambient temperature: 8°C ~ 35°C Application area: up to 90m² Swiss plug: EU plug with fixed adapter for Switzerland hose connection: Yes Guarantee: 2 years

Read more less

Powerful dehumidifier / construction dryer 50B-WDH with calibrated consumption meter. The "50B" was specially developed to quickly dry water damage, e.g. after high water or flooding. It has a very strong dehumidification capacity and only an on/off switch for optimal operation on construction sites and when drying water damage. A hygrostat for regulating the target humidity was deliberately omitted in this version. Recommended room size up to 120m², from 8°C. The performance and drying speed can be further accelerated with free-standing fans if required (e.g. FN45 from our range). Characteristics • Dehumidification capacity of up to 42 liters / day (at 30°C/80% RH) • Function for continuous operation/continuous dehumidification • calibrated consumption meter (kWh) • On/off toggle switch • Equipped with a highly efficient rotary compressor. This compressor is one of the most powerful compressors on the market • Automatic professional defrost function • Removable condensate tank • Possibility of connecting a hose for continuous drainage of the condensate • Powder-coated metal housing/metal frame • Very easy mobility thanks to transport handles and large wheels for safe travel over steps and uneven ground • Operating warning light / defrost light • No separate or renewed coolant is required (closed circuit) • Cleanable air filter grille • Environmentally friendly refrigerant R290 • CFC free and compliance with WEEE standards Important The "50B" construction dryer is not suitable for use in very cold rooms, as the powerful dehumidification unit can cause it to freeze up during continuous operation below 8°C.   dehumidification performance The dryer can be used over a temperature range between +8°C and +32°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C/80% RH: approx. 42 liters (at 60% RH: approx. 21 liters) 20°C/80% RH: approx. 21 liters (at 60% RH: approx. 12 liters 15°C/80% RH: approx. 15 liters (at 60% RH: approx. 8 liters) 10°C/80% RH: approx. 8 liters (at 60% RH: approx. 6 liters) (RH=relative humidity) Technical data  Tension 220-240V / 50Hz Power consumption: max. 820 (3.7 A) or 620W (at 20°C/60% RH) Sound pressure level: 57 dB(A) (manufacturer information) dehumidification performance 42 liters/day (30°C / 80% RH) amount of recirculated air 400 m³/h (built-in) condensate tank about 5 liters (direct hose connection possible) compressor rotary compressor refrigerant R290 (230gr.) Dimensions (H x W x D) 890 x 450 x 740 mm Weight 32 kg cessation of operations ON/OFF toggle switch ambient temperature 8°C ~ 32°C application area Rooms from min. 10m² to max. 120m² Swiss plug: EU plug with fixed adapter for Switzerland hose connection Yes guarantee 2 years

Read more less

With its powerful dehumidification performance, this professional construction dryer can handle even the most demanding tasks. The integrated condensate water pump ensures comfortable operation, as the water that accumulates is automatically drained away. You also get other professional functions such as an operating hour counter, a temperature display, a humidity display and an automatic defrost function. Considering its dehumidification power, it is economical in consumption and has the new refrigerant "R290", which has a minimal impact on the environment. The "Global Warming Potential (GWP)" is 3, which corresponds to a reduction of 99.85% compared to comparable models of previous generations. service The control panel is located at the front of the housing and offers various options:     setting target humidity The desired target humidity is set at the touch of a button, i.e. the value at which the device should keep the room stable. If the measured humidity in the room is higher, the device will operate. If the humidity is correct, the device pauses, and not only the compressor but also the fan stops. The desired target humidity can be selected in 5% increments between 10 - 90%, with the setting at 10% corresponding to continuous operation. To protect a room from mold and odors, a value of around 60% is sufficient, so the ideal setting is 50 or 55%. Lower values ​​do not provide any additional benefit, unless you are drying out water damage.  timer With the timer, operation can either be limited to a time "from now" (1-24 hours) or started at a time 1-24 hours in the future, for example if you want to start operation at the low tariff.  memory function If you want to run the device at the same time every day (for example during off-peak hours), you can do this with a standard timer. The dryer remembers the last setting and returns with the same settings after a power outage.     pump  Instead of a bucket, this model has an integrated water pump that pumps away the condensate that is removed. The hose included in the delivery is 7.5m, but can also be extended. If the hose is laid flat, the water can easily cover distances of up to 20m. When pumping upwards, the possible distance is reduced depending on the height difference. A check valve prevents water standing in the hose from flowing back into the device. The device itself contains a small tank that can be completely pumped out at the touch of a button before transport.     Advantages at a glance   • Dehumidification capacity of up to 65 liters/day • Professional operating hour counter for monitoring the operating time • The delivery includes 7.5 meters of condensate hose including a check valve • Temperature display (input / output) to monitor the ambient conditions • Integrated pump function that allows you to pump out the condensate up to a discharge height of 3 meters • Automatic continuation of operation after a power failure • Equipped with a highly efficient rotary compressor for maximum performance and energy efficiency • Clear LED display including humidity indicator for easy operation and control • Humidity control in 5% steps between 10% to 90% for precise drying results • Automatic professional defrost function to prevent ice formation in the cooling system • Timer function per hour for flexible drying time • Stackable to save space for easy transport and storage • Two semi-pneumatic tires for easy transport • CE (EMC + LVD) conformity and “GS” tested.     scope of delivery   • Construction dryer • Power cable • Condensate hose with check valve • Operating instructions   dehumidification performance The dryer can be used over a wide temperature range between +5°C and +35°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of approximate dehumidification performance under different (constant) ambient conditions: 30 °C: 80% humid: 65 liters / 24 hours - 60% humid: 42 liters / 24 hours 20 °C: 80% moisture: 32 liters / 24 hours - 60% moisture: 24 liters / 24 hours 15 °C: 80% moisture: 23 liters / 24 hours - 60% moisture: 17 liters / 24 hours 10 °C: 80% moisture: 13 liters / 24 hours - 60% moisture: 12 liters / 24 hours    Technical data  Tension 220-240V / 50Hz power consumption max. 850 (3.7 A) or 710W (3.1 A) at 20°C/60% RH sound pressure level 55 dB(A) (manufacturer's information) dehumidification performance max. 65 liters/day (30°C / 80% RH) amount of recirculated air 350 m³/h, 1 ventilation level condensate tank No tank, integrated pump with 7.5 m hose compressor rotary compressor refrigerant R290C (250gr.) Dimensions (H x W x L) 470 x 325 x 600 mm Weight: 39 kg Operating setting: Digital control panel Ambient temperature: 5°C ~ 35°C Application area: up to 150 m² Swiss plug: EU plug with fixed adapter for Switzerland hose connection: Yes Guarantee: 2 years

Read more less

A handy electric heater with very good heat efficiency thanks to the ceramic heating element. This brings the heater to the desired heat output with a short warm-up time. At the high heat setting of 2000 W, the air blown out is heated by more than 60 °C compared to the room temperature. The temperature controller has a wide range starting at 0 °C. The BGP can therefore also be used as a frost guard if the room temperature is to be kept just above freezing. The ventilation is a little quieter at around 120 m³/h compared to other electric heaters in this category, but the BGP's operating noise is barely audible thanks to its quiet radial fan. This model is therefore suitable not only for use in construction and industry, but also for heating quiet areas such as waiting rooms, living rooms or simply for keeping your feet warm under your desk.   The housing is made of black, fireproof plastic and a metal rack with a practical carrying handle. The fan head can be rotated vertically in a large radius of up to 90°, so that the warm air can be directed precisely to the desired location. Using two standard hooks, the device can even be hung on a wall (hooks not included). The heater has two rotary controls on the top of the housing: • left level control: ventilation only / 1200 W / 2000 W • right: stepless thermostat to regulate the desired temperature In addition, there is an operating light between the two controls that indicates when the heating is running. If the temperature is correct, the heating pauses (the ventilation also stops). If the temperature drops below the set value, operation starts automatically. The adjustable range of the temperature controller is 0° to 85°C, with an overheating protection that interrupts heating if the room temperature is too warm at around 40 °C. Due to the high air outlet temperature, the device should not be placed within reach of children or pets, although the solid front grill of this model poses significantly less risk of burns than similar fan heaters that only have a metal grille for the air outlet.  How much heat do I need?   Our free heat requirement calculator helps you determine the required heating output for your rooms. Click here to go to the online calculator: Calculate heat requirement     Technical data   Voltage: 220V-240V / 50Hz Heating levels: 2 levels 1200 W / 2000 W + pure fan level: 25 W Fuse min.: 9.1 A Room thermostat: continuously variable 0 - 85 °C Air volume flow: only one fan level our measurement: 120 m³/h (Manufacturer's specification: 170 m³/h) Protection class: IP20 operating noise (our measurement): 1 m distance: 39 dB(A) 2.5m distance: 36 dB(A) Dimensions: Height with handle: 32 cm Width: 30 cm Depth: 25 cm Weight: 3.1 Kg Operating setting: rotary wheel Application area: up to max. 25 m² Swiss plug: Yes + 1.30 m connection cable Warranty: 2 years    

Read more less

Powerful construction heater with 400V / 16A connection for heating construction sites and industrial spaces. Very good price/performance ratio with easy handling. The device is very effective and made almost entirely of metal and is therefore extremely robust. The connection cable of a good 1m in length and the CEE16A plug are included in the scope of delivery. As accessories, we offer extension cables in various lengths at reasonable prices. WDH® is a quality product or a brand that is almost exclusively available through specialist retailers. Quality standards include: durability, compliance with the specified performance, tested by TÜV “GS”, of course with CE conformity, recyclable materials, etc. The WDH 9kW series is optimized according to the latest technical knowledge.     Advantages at a glance   • Heating power adjustable up to 9000 watts (9 kW) • Thermostat for regulating and setting the desired temperature • Two heat levels selectable (1 = 4500 watts 2 = 9000) • Pure fan operation also possible without heating function • Also suitable for continuous operation • Overheating protection and protected against splash water and small foreign objects (IP24) • Continuous temperature control (0 ~ 45° C) • Integrated protection mechanism against overheating and reset function • No adjustments in case of power failure (device continues where it was interrupted) • Very easy mobility thanks to handy carrying handles • The device is ready for use immediately (no installation or assembly required) • Quiet operation • No oxygen consumption • Intertek “GS” tested and CE compliant • WEEE standards   Miscellaneous • To operate this heater, a five-pole 16 A power connection 380-400 V (50 / 60 Hz) with CEE16A plug is required. • As with all high-voltage fan heaters, heating stops when the set target temperature is reached, while ventilation continues to run to protect against overheating.   usage examples Temperature regulation: construction sites, workshops, agriculture, apartments, garages, warehouses, cellars, sheds, garden sheds, laundry rooms and for use at work and for hobbies etc. Also ideal as a frost guard Drying: Ideal for faster drying of plaster, screed, etc. (Work can continue or be carried out very quickly) Damp rooms: Ideal for damp cellars, old walls and drying all damp objects Damage repair: After flooding, after damage caused by fire-fighting water or in the event of rot, these devices are ideal for supporting the drying process.     How much heat do I need?   Our free heat requirement calculator helps you determine the required heating output for your rooms. Click here to go to the online calculator: Calculate heat requirement     Technical data   Voltage: 380V - 400 V / 50Hz Power consumption: 2 levels 4.5 kW / max. 9 kW Fuse max.: 16 A Room thermostat: 0 - 45 °C Air volume flow: 660 m³/h Protection class: IP24 (Foreign body protection with ø > 12.5 mm + splash protection) Dimensions (H/W/D): 43 x 30 x 39 cm Weight: 9.7 kg Operating setting: rotary wheel Application area: up to max. 90 m² Plug: CEE 16 A Warranty: 2 years Series: WDH-BGP09 Special features: 1.15 m connection cable included

Read more less

Made of stainless steel, suitable for example for these indirect oil heaters from Master: • BV110 • BV170 • BV290E • BV490

Read more less

The Master BV110 is a mobile oil heater that has an exhaust chimney. In contrast to direct oil heaters, toxic exhaust gases can be separated from the warm air so that the air blown out is warm and clean. This heater is usually installed outside the area to be heated and the warm air is led into the room via a hose.   If the temperature needs to be regulated, the optional TH5 thermostat can be connected directly, which monitors the room temperature and keeps it constant.   The oil tank is integrated into a rack with wheels underneath the heater. It holds 65 liters. With a consumption of 3.2 liters per hour, this results in independent heating operation for around 21 hours per tank filling. As with all heaters of this type, the operating noise is clearly audible at 77 dB(A).  Important: the combustion of oil consumes oxygen. If this heater is used in closed, poorly ventilated rooms, the exhaust gases from the chimney must be discharged to the outside (for example through the ceiling or with pipes through the wall). A safe distance from flammable materials must also be observed. The heater must also not be operated in rooms where the air contains explosive gases. product features • Clean warm air • Connection of an additional room thermostat possible • Connection to flexible cable possible • Flue gas extraction • Large air passage • Overheat thermostat • Final ventilation • External transparent intake filter • Three oil filters: oil pump filter, suction filter and inlet filter • Electronic flame control with photocell • Heat exchanger • Electronic flame control with photocell heat exchanger • Oil tank with level indicator • Chassis included • Snorkel • Easy maintenance • Robust and durable construction • LED light     scope of delivery   • Oil heater as shown in the illustration, ready to plug in, quick self-assembly of stand and guide bracket     Optional accessories (not included)   • Chimney exhaust pipe 1m made of stainless steel Ø150 mm (Master article 4013.243) • Exhaust pipe bend 90° stainless steel Ø150 mm (Master article 4013.247) • Adjustable angle exhaust pipe bend made of stainless steel Ø150 mm (Master article 4515.950) • Stainless steel extractor hood Ø150 mm (Master article 4013.249) • Hose adapter ring Ø34 cm for fixing 1 hose (Master article 4034.890), or • 2-way outlet 2 x Ø31 cm for fixing 2 hoses Ø31 cm (7.6 m = Master article 4515.360) • Warm air hoses (nylon, black, including bag): Ø31 cm 7.6 m for 2-way outlet (Master article 4515.360) Ø34 cm 7.6 m (Master article 4515.367) suitable for hose adapter ring • Air return set Ø31 cm (Master article 4100.826) • Rain cover (Master article 4514.651)       Technical data  Dimensions L x W x H mm 1235 x 575 x 1000 Weight 61 kg Color housing metal yellow powder-coated air flow 1800 m 3 /h heating output 34 kW power consumption 800 W (fan) insurance 3.5 A motor voltage 220-240 V / 50Hz> Pressure 12 bar operating noise 77 dB(A) tank capacity 65 liters fuel diesel / kerosene consumption per hour 3.2 liters operation with a full tank 21 hours guarantee 2 years

Read more less

Powerful mobile oil heater with exhaust chimney. In contrast to direct oil heaters, toxic exhaust gases can be separated from the warm air so that the air blown out is warm and clean. This heater is usually installed outside the area to be heated and the warm air is led into the room via a hose.   If the temperature needs to be regulated, the optional TH5 thermostat can be connected directly, which monitors the room temperature and keeps it constant.   The oil tank is integrated into a rack with wheels underneath the heater. It holds 65 liters. With a consumption of 4.7 liters per hour, this results in independent heating operation for around 14 hours per tank filling. As with all heaters of this type, the operating noise is clearly audible.  Important: the combustion of oil consumes oxygen. If this heater is used in closed, poorly ventilated rooms, the exhaust gases from the chimney must be discharged to the outside (for example through the ceiling or with pipes through the wall). A safe distance from flammable materials must also be observed. The heater must also not be operated in rooms where the air contains explosive gases. product features • Clean warm air • Connection of an additional room thermostat possible • Connection to flexible cable possible • Flue gas extraction • Large air passage • Overheat thermostat • Final ventilation • External transparent intake filter • Three oil filters: oil pump filter, suction filter and inlet filter • Electronic flame control with photocell • Heat exchanger • Electronic flame control with photocell heat exchanger • Oil tank with level indicator • Chassis included • Snorkel • Easy maintenance • Robust and durable construction • LED light     scope of delivery   • Oil heater as shown in the illustration, ready to plug in, quick self-assembly of stand and guide bracket     Optional accessories (not included)   • Chimney exhaust pipe 1m made of stainless steel Ø150 mm (Master article 4013.243) • Exhaust pipe bend 90° stainless steel Ø150 mm (Master article 4013.247) • Adjustable angle exhaust pipe bend made of stainless steel Ø150 mm (Master article 4515.950) • Stainless steel extractor hood Ø150 mm (Master article 4013.249) • Hose adapter ring Ø34 cm for fixing 1 hose (Master article 4034.890), or • 2-way outlet 2 x Ø31 cm for fixing 2 hoses Ø31 cm (7.6 m = Master article 4515.360) • Warm air hoses (nylon, black, including bag): Ø31 cm 7.6 m for 2-way outlet (Master article 4515.360) Ø34 cm 7.6 m (Master article 4515.367) suitable for hose adapter ring • Air return set Ø31 cm (Master article 4100.826) • Rain cover (Master article 4514.651)       Technical data  Dimensions L x W x H mm 1350 x 575 x 1000 Weight 67 kg Color housing metal yellow powder-coated air flow 1800 m 3 /h heating output 49 kW power consumption 800 W (fan) insurance 3.5 A motor voltage 220-240 V / 50Hz Pressure 12 bar operating noise 78 dB(A) tank capacity 65 liters fuel diesel / kerosene consumption per hour 4.7 liters operation with a full tank 14 hours guarantee 2 years

Read more less