Master's mobile oil heaters are suitable for use wherever a lot of heat is needed temporarily. With 85 kW of power, this model is very powerful and ensures good heat distribution even in larger areas.   With indirect oil heaters, the exhaust gases from combustion are not simply blown out into the room with the warm air, but are discharged separately via a chimney. Master heaters are therefore highly efficient and produce 100% clean, dry and smoke-free warm air. They are ideal for poorly ventilated rooms such as shops, event tents, food preparation areas or exhibition halls. They can be connected to flexible warm air hoses for even air distribution.   On the one hand, diesel or kerosene is required to generate heat, and on the other hand, a socket (normal household socket) is required to operate the ventilation and control system.     Characteristics   • Clean warm air • Connection to warm air hose possible • Exhaust connection • Heat exchanger • Overheat thermostat • Follow-up time • Motor with overheating protection • Three oil filters: oil pump filter, suction filter and inlet filter • External transparent oil intake filter • Electronic flame monitoring with photocell • Stainless steel combustion chamber • Oil level indicator • Chassis included • High quality fuel pump • Fuel pump with access for easy maintenance • Snorkel for drip-free fuel tank • LED light     Technical data   heating output 85 kW (290,000 Btu/h or 73,100 kcal/h) air performance 3,300 m³/h One tank of fuel is enough for 13 hours thermostat operation Analog or digital consumption 8.1 liters / hour mains voltage 220-240 V / 50 Hz power consumption 1.06 kW rated current 4.6 A protection class IP44 tank capacity 105 liters exhaust pipe connection Ø 150 mm air outlet Ø 410 mm Dimensions (L x W x H) 1600 x 700 x 1150 mm Weight device 101 kg (package weight 123 kg) guarantee 2 years

Read more less

Made of stainless steel, suitable for example for this indirect oil heater from Master: • BV77

Read more less

Mobile oil heater with an exhaust chimney. In contrast to direct oil heaters, toxic exhaust gases can be separated from the warm air so that the air blown out is warm and clean. This heater is usually installed outside the area to be heated and the warm air is led into the room via a hose.   If the temperature needs to be regulated, the optional TH5 thermostat can be connected directly, which monitors the room temperature and keeps it constant.   The oil tank is integrated into a rack with wheels underneath the heater. It holds 36 liters. With a consumption of 1.67 liters per hour, this results in independent heating operation for 17 hours per tank filling. As with all heaters of this type, the operating noise is clearly audible at 73 dB(A).  Important: the combustion of oil consumes oxygen. If this heater is used in closed, poorly ventilated rooms, the exhaust gases from the chimney must be discharged to the outside (for example through the ceiling or with pipes through the wall). A safe distance from flammable materials must also be observed. The heater must also not be operated in rooms where the air contains explosive gases. product features • Clean warm air • Connection of an additional room thermostat possible • Connection to flexible cable possible • Flue gas extraction • Large air passage • Overheat thermostat • Final ventilation • External transparent intake filter • Three oil filters: oil pump filter, suction filter and inlet filter • Electronic flame control with photocell • Heat exchanger • Electronic flame control with photocell heat exchanger • Oil tank with level indicator • Chassis included • Snorkel • Easy maintenance • Robust and durable construction • LED light     Technical data  Dimensions L x W x H mm 1130 x 380 x 660 Weight 33 kg Color housing metal yellow powder-coated air flow 1550m 3 /h heating output 21 kW power consumption 300W (fan) insurance 1.5A motor voltage 220-240 V / 50Hz> Pressure 12 bar operating noise 73 dB(A) tank capacity 36 liters fuel diesel / kerosene consumption per hour 1.67 liters operation with a full tank 17 hours guarantee 2 years

Read more less

Solid little fans with a housing made of impact-resistant plastic. The radial fan blows the air into the room with good pressure and relatively quietly. Therefore also suitable for drying work in private environments, for example after water damage behind the kitchen counter, under the bathtub or to support drying after painting and plastering work. The turbo fan has a long-lasting single-phase motor and 350 m³/h air circulation. The fan is single-stage, i.e. on or off. The impellers are made of robust plastic. In contrast to cheaper models, the toggle switch is screwed, not welded. This means that this fan can be repaired in the event of a defect.   setup The fans can be installed in 3 different positions: horizontal - blowing straight forward inclined - blow-out diagonally upwards tilted - blowing out upwards   usage examples • for commercial use on construction sites to accelerate building drying • for drying carpets • for private purposes Option hose adapter and air hoses Our range includes suitable hose adapters for either 2 or 3 air hoses. These adapters are very easy to mount on the air outlet area and can be removed at any time. Technical data Tension 230V / 50Hz power consumption 80 W (0.4 A) ventilation levels 1 amount of recirculated air 350 m³/h blow-out speed approx. 8.5m/sec. sound pressure level (our measurement) Level: 1 / 2.5m Distance: 58 / 56 dB(A) Dimensions (H x W x D) 310 x 253 x 280 mm Weight 3.5 kg cessation of operations toggle switch Connection Swiss plug, approx. 3m cable guarantee 2 years

Read more less

Compact air conditioning unit in energy class A for cooling bedrooms, offices and smaller living rooms up to approx. 18m². It is easy to operate on the device itself or via remote control. The fan pushes the cold air into the room at a comfortable height, and the blow-out direction can be controlled by vertically adjustable slats. The warm exhaust air is led out of the room using the hose provided, e.g. out the window or through the balcony door. As with all mobile air conditioning units, the ventilation and motor of this unit can be heard clearly, although the overall noise has been noticeably reduced compared to previous mobile air conditioning units in this performance class.   Design / Scope of delivery • White plastic housing • Control panel with display of the desired temperature and the current room temperature • 4 rollers • Remote control • Extendable exhaust hose approx. 1.50m (with narrowing attachment for tilt windows) • Cable approx. 1.50 m with Swiss plug (normal socket 230V / three-pin) • User manual German + French  Once the target temperature is reached, the device stops cooling and switches back on automatically when the room air warms up again. As with most air conditioning units, the ventilation always runs. The selectable temperature range is between 18 and 32°C. The timer can be used to limit the operating time from 1 - 12 hours. Alternatively, the timer can also be used to start the device 1-12 hours in the future. For example, so that it switches on automatically shortly before you return or before you go to bed. No memory function, ie the device must be restarted after a power failure, therefore not suitable for operation with a timer.   The water that is removed from the air during the cooling process automatically evaporates with the warm air through the exhaust hose. When the device is switched off, a few drops of residual water remain and are collected in a small internal tank. This tank must be emptied approximately once a week, depending on how often it is used; a signal light indicates when it is full. environmentally friendly refrigerant R290 The reduction of greenhouse gases (GWP - Global Warming Potential) and ozone depletion potential (ODP - Ozone Depletion Potential) is becoming increasingly important. As a manufacturer of mobile local air conditioning units, we also want to make our contribution to environmental protection by using R290 as a natural refrigerant. The abbreviation R290 stands for propane gas - a chemical compound made up of the naturally occurring elements hydrogen and carbon. In contrast to the previously used refrigerants containing fluorocarbons (here: HFCs) in air conditioning and refrigeration technology, the use of R290 as a natural refrigerant in mobile local air conditioning units has the advantage that its components are completely natural and ecological and therefore have neither an ozone depletion potential nor a significant direct global warming potential.    Not suitable for year-round cooling of server rooms.         Technical data   cooling capacity 2010 W / 7000 BTH/h power consumption 778 W Room size max. 20 m² air volume flow 320 m³/h on level 2 steps 2 cooling setting range 18 - 32° C operating modes cooling, ventilation exhaust hose Ø 127 mm, length 1.5m refrigerant R290 power connection 230V / 50 Hz noise level (manufacturer's information)  noise level (our measurement)   65 dB(A) 1.0 m distance fan level 1 / 3: 56 / 59 dB(A) 2.5 m distance fan level 1 / 3: 53 / 56 dB(A) energy class A shipping weight 21.50 kg Dimensions (H x W x D) 752 x 305 x 383 mm guarantee 2 years  

Read more less

  A well-designed, powerful air conditioning system for cooling living rooms and bedrooms. It is easy to operate on the device itself or via remote control. The exhaust air is led out of the room using the hose provided, e.g. out the window or through the balcony door. Energy class A. Powerful fan, with adjustable slats the blowing direction of the cold air can be easily controlled.   Design / Scope of delivery • Plastic housing white/anthracite • Control panel with display of the desired temperature and the current room temperature • 4 rollers • Remote control • Extendable exhaust hose approx. 1.40m (no narrowing attachment for tilt windows is available / included with this model) • Cable approx. 1.50 m with Swiss plug (normal socket 230V / three-pin) • Operating instructions in German+French   Once the target temperature is reached, the device stops cooling (the ventilation always runs, as with most air conditioning units) and switches back on automatically when the room air warms up again (selectable range: 18-32°C). The air conditioning can be limited to a timer of 1 - 24 hours, but can also be programmed 1-24 hours in the future so that it switches on automatically 1 hour before you return or before you go to bed, for example. No memory function, i.e. the device must be restarted after a power failure, therefore not suitable for operation with a timer. extra cooling A compartment on the side can be filled with water, which cools the air blown out by another 2°C. This brings a welcome increase in performance during the warmest season. storage compartment for accessories The hose and the accessories included in the delivery can be cleverly stored in a compartment prepared for this purpose from above in the device itself. As with all mobile air conditioners, the ventilation and motor of this model are clearly audible, although the overall noise has been noticeably reduced compared to previous mobile air conditioners in this performance class. Not suitable for year-round cooling of server rooms.       Technical data  functions Cooling, dehumidifying, ventilating energy class A cooling capacity 3200 W / 11000 BTU/h consumption cooling mode 1230 W Suitable for rooms up to 28 m² air volume max. 350m³/h fan 3-stage Selectable temperature range 18 - 32° C Ø exhaust hose inside/outside 132 / 142mm (length 140 cm) refrigerant R290 power connection 230V / 50 Hz shipping weight 31 kg Dimensions (H x W x D) 744 x 485 x 313 mm noise level (our measurement) 1.0 m distance fan level 1/3: 56 / 58 dB(A) 2.5 m distance fan level 1/3: 53 / 54 dB(A) guarantee 2 years

Read more less

Solidly built wall unit for dehumidifying rooms up to 25m2/70m2, ideal for bathrooms, saunas, archives or hobby rooms. The unit is available in two versions, with and without condensate tank (both versions have a direct hose connection), silver or white. The air intake is at the front, the dry air is blown out on both sides. For good circulation, the CDF10 should therefore have at least 30 cm of free space on each side. At temperatures below 3°C, the device switches off automatically. Recommended ambient temperature 8-30°C. What is also special about the CDF10 is that the hygrostat switch (for setting the desired room humidity) is located behind the front panel, which is fixed with two screws. This means that it is protected from changes to the target humidity by unauthorized persons. The CDF10 is therefore particularly suitable for use in public spaces. The dehumidifier is mounted on the wall using the wall bracket included in the delivery, and the condensate is drained off via the hose connection at the bottom of the dehumidifier (the hose must be sloping as there is no integrated pump). Alternatively, the dryer is also available with an integrated 5.5-liter bucket for collecting the water. The CDF10 is one of the quieter dehumidifiers. The operating noise can be heard in the immediate vicinity, but is hardly noticeable when the doors are closed. This model is offered in the same design under the name of the Danish manufacturer "Dantherm" and also as the "Krüger CDF10".   Technical data Voltage: 230 V AC, Swiss plug Power consumption: 300W max. Protection: 2.1 A/T Sound pressure level: 1m distance 49 dB(A) 2.5 m distance 46 dB(A) Dehumidification capacity: 10 liters/day (30°C / 80% RH) Refrigerant: R134a (190g) Dimensions (H/W/D): 60 x 54 x 25 cm without tank 81.5 x 54 x 25 with tank Weight: 28 kg without tank 30 kg with tank Ambient temperature: 8°C ~ 30°C (our recommendation) Warranty: 2 years

Read more less

Ceiling telescopes for ceiling mounting clothesline systems   With the ceiling telescopes you can hang the connecting rails of your clothesline system down from the ceiling at the right height. The Dryfix and Krüger connecting rails fit these supports.   The ceiling telescopes are made of chrome-plated metal (longest version: galvanized) and offer solid stability and load-bearing capacity of the system. Depending on the room height and the desired height of the lines, 4 versions are available. The telescopes can be adjusted to a precise height within the dimensions described below, although the height cannot be changed after installation: Length 1: adjustable 230-330mm from ceiling Fr. 34.00 Length 2: adjustable 400-600mm from ceiling Fr. 36.00 Length 3: adjustable 550-800mm from ceiling Fr. 39.00 Length 4: adjustable 750-1050mm from ceiling Fr. 58.00   Example: the room is 2.30m high, the lines should be at the standard height of 1.85m. You need a distance of 45cm from the ceiling. The appropriate telescope in this example is therefore length 2.   Please note that mounting directly on the concrete ceiling provides the best stability. If the ceiling is insulated, we recommend cutting out the insulation for stability reasons, mounting the supports directly on the concrete and then closing the recesses again. If mounted on the insulation, the insulation may collapse due to the strong cable tension.   It is also important to note that there are often cables in the ceiling. Drilling deeper than 3cm can damage electrical or water pipes.   How many ceiling mounts are needed? Due to the strong cable pull, we recommend 2 pieces up to 1.50 m rail width (per connecting rail) and 3 pieces for longer rails (per connecting rail)

Read more less

3cm spacer rollers for bridging cables or lines. For mounting between the wall and clothesline connecting rails. Made of solid, robust plastic, suitable for all connecting rails in our range. Technical data Length: 30 mm Outside diameter: 25 mm Hole diameter: 10 mm Material / Color: robust plastic, anthracite Weight: 21 gr

Read more less

In contrast to conventional sandbags, this granulate bag saves a lot of space during transport. The jute bag contains highly absorbent Dryfix granulate and can absorb up to 16 liters of water in a short time. This creates granulate that fills the entire bag. It can then be used in a similar way to sandbags and is ideal for stopping flooding or protecting buildings and cellar entrances.     Advantages at a glance   • Space-saving storage before use and during transport • Airtight packaging that protects against moisture • Environmentally friendly, tear-resistant material made of high-quality jute • Ready for use immediately after a short activation, 10 litres of water are absorbed in just 2 minutes • Easy stacking of protective dams • No procurement and time-consuming refilling of sand necessary     Application   • Remove BAG from the protective packaging. • Activate in water for approx. 2 minutes (use existing standing water, immerse in a water basin or pour sufficient water over it). • Place in the desired location (doors, basement windows, etc.) and stack like normal sandbags.          

Read more less

A quiet dehumidifier for basements and bathrooms. The C12's landscape format makes it very different from other wall-mounted dehumidifiers, as it can be installed in places where other devices don't fit. For example, in the bathroom above the mirror cabinet, in basements above the door lintel, or inconspicuously directly under the ceiling in basement passageways. It is quiet, economical, and manufactured to a high standard using professional-level components.   The moist air in the room is sucked in from the left side and the dry air is blown out into the room at the front. A filter that can be pulled out to the front cleans the air of coarse dust. The desired target humidity can be regulated using a continuously variable hygrostat switch. When the target humidity is reached, the dryer pauses (the ventilation also stops) and starts operating again with the same setting when the humidity in the room rises again. Installation is very simple: a support rail is attached to the wall with two screws, and the dryer can then simply be hung on it. The C12 does not have a bucket. This means that the extracted condensate must be drained down via a hose (12 mm inner diameter) into a nearby washbasin, into the bathtub or into a siphon drain. Features & Benefits • Continuously variable hygrostat for regulating the desired humidity. • Automatic function, ie the device switches off automatically when the target moisture content is reached and also switches on again automatically when it becomes more humid (including a +/- 5% power saving function so that the device does not switch on and off constantly. • The ventilation also stops when the set humidity is reached. • Suitable for unattended use and continuous operation. • Power consumption of only max. 205 watts (at 20 °C / 60 % humidity: 150 W). • Equipped with very reliable quality brand compressor. • No adjustments in the event of a power failure (device continues where it was interrupted), therefore also suitable for operation with a timer. • Direct hose connection for continuous drainage of condensate. • Operation warning light. • Maintenance-free / no separate or additional coolant is required (closed circuit). • Easy wall mounting on support rail (included). • Elegant design, metal housing, white powder-coated. • Quiet operation (comparable to bathroom extractor fan). • CFC free and meets WEEE standards. • CE compliant.    usage examples Cellar humidity : Ideal for damp cellars, cellar passages in single-family and multi-family homes, archives and for keeping laundry rooms dry (the C12 is too weak for active laundry drying, but it is certainly capable of stabilizing general humidity in laundry rooms). Bathroom : Fits over doors or mirrored cabinets to save space dehumidification performance The dryer is designed for rooms with at least a slight temperature between +8°C and +32°C. As with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions: 10 °C / 80% RH: 4.0 liters / 24 h (60%: 1.6 liters) 15 °C / 80% RH: 4.8 liters / 24 h (60%: 2.4 liters) 20 °C / 80% RH: 5.6 liters / 24 h (60%: 4.0 liters) 25 °C / 80% RH: 8.0 liters / 24 h (60%: 5.6 liters) 30 °C / 80% RH: 12 liters / 24 h (RH = relative humidity) scope of delivery • Plug-in device • Support rail with screws / dowels • 2 m condensate hose 12 mm assembly If you wish, we can professionally install the dryer at your home - price on request.   Technical data  Tension 220V-240V / 50Hz power consumption 150 W at 20 °C / 60% RH (max. 205 W) sound pressure level 2.5 m distance 44 dB(A) (our measurement) dehumidification performance max. 12 liters/day (30 °C / 80% RH) condensate tank direct hose connection 12 mm, no bucket compressor rotary compressor refrigerant R134A Dimensions (H/W/D) 32 x 70 x 23 cm (case) 35.5 x 71 x 23 cm (including rotary switch + hose connection) Weight 24.3 kg cessation of operations hygrostat wheel ambient temperature 8 °C ~ 35 °C application area up to approx. 30 m² Swiss plug Yes hose connection Yes / hose with 12 mm inner diameter Defrost electronically guarantee 2 years

Read more less

The "Eco15" is a high-quality, yet affordable 15 kW fan heater for heating construction sites and industrial premises. It has a robust, stackable metal housing with rack. The device plug is located directly at the back of the housing (CEE32A). The connection cable itself is not included in the scope of delivery, but can be ordered inexpensively in various lengths and designs if required, e.g. acid-resistant PUR cables for construction sites or with plastic sheathing for private use. The function switch allows the device to be set to 5000 / 10000 or 15000W heating power or just as a fan. A room thermostat keeps the temperature at the set value. When the desired temperature is reached, the heating switches off while the fan continues to run to ensure constant air circulation in the room. These fan heaters are also suitable for unattended operation during the cold season, for example in garages, workshops, storage rooms, shops, greenhouses, sports and factory halls as well as for many other applications. Design of these fan heaters: - Robust metal housing - carrying handles - room thermostat - Safety thermostat, protects against overheating - Incl. CEE socket 5-pin 32 A (corresponds to the Swiss standard) warranty 2 years Shipping costs for 1 item: from Fr. 18.- (Based on B-Post, other shipping options can be found in the shopping cart).Technical data   Technical data Power: 15 kW 3 levels: 5 kW / 10 kW / 15 kW Air volume flow: 1550 m³/h Room thermostat: 4 – 40 °C Sound: 52 dB(A) Dimensions (HxWxD): 550x410x360 mm Weight: 14.5 kg Current consumption: 25 A max. Mains connection: 400 V / 50Hz Connection cable: not included Plug: CEE32A Protection class: IPX4

Read more less

Benefit from incredibly low prices for construction heaters and fan heaters. The "Eco2" is handy but still robustly built. Ready for immediate use including cable and plug.   With metal housing (color: black), carrying handle, room thermostat, safety thermostat (protects against overheating), including 1.8m connection cable and Swiss plug 230 V (normal Swiss socket), 3-pin. After the target temperature is reached, only the fan (28 W) rotates to prevent the device from overheating. Heating can be selected in 2 stages: 1000/2000W.   Technical data  Tension 220V-240V / 50Hz power consumption 1000W / 2000W Protection min. 8.6 A room thermostat 4 - 40 °C air volume flow 180 m²/h protection class IP44 operating noise 1 m distance 51 db(A) (our measurement) Dimensions (H/W/D) 32 x 20 x 21 cm Weight 4.2 kg cessation of operations rotary wheel application area up to max. 20 m² Swiss plug: Yes guarantee 2 years EAN number 0745114 671509 How much heating power do I need? As a rough rule of thumb, for closed rooms with a normal ceiling height, you need around 1 kW of heating power per 10 m². This value depends on the insulation and the cold ingress into the room.

Read more less

The "Eco9" is a high-quality, yet affordable 9kW fan heater for heating construction sites and industrial premises. It has a robust, stackable metal housing with rack. The device plug is located directly at the back of the housing (CEE16A). The connection cable itself is not included in the scope of delivery, but can be ordered inexpensively in various lengths and designs if required, e.g. acid-resistant PUR cables for construction sites or with plastic sheathing for private use. The function switch allows the device to be set to 4500 or 9000W heating power or just as a fan. A room thermostat keeps the temperature at the set value. When the desired temperature is reached, the heating switches off while the fan continues to run to ensure constant air circulation in the room. These fan heaters are also suitable for unattended operation during the cold season, for example in garages, workshops, storage rooms, shops, greenhouses, sports and factory halls as well as for many other applications. Design of these fan heaters: - Robust metal housing - carrying handles - room thermostat - Safety thermostat, protects against overheating - Incl. CEE socket 5-pin 16 A (corresponds to the Swiss standard) warranty 2 years Shipping costs for 1 item: from Fr. 12.- (based on B-Post, other shipping options can be found in the shopping cart).   Technical data Power: 9 kW 2 levels: 4.5 kW / 9 kW Air volume flow: 980 m³/h Room thermostat: 4 – 40 °C Sound: 52 dB(A) Dimensions (HxWxD): 490x355x300 mm Weight: 10.0 kg Current consumption: 12.4 A max. Mains connection: 400 V / 50Hz Connection cable: not included Plug: CEE16A Protection class: IPX4

Read more less

By using the Dryfix drying granules "Home" or "Pro" a gel is created which can be easily and quickly liquefied again using this powder. After finishing the work, sprinkle it over the resulting gel. After about 5 minutes it will turn back into water.     Advantages • No disposal of the gel necessary • Saves time • Easy to use • Safe for the environment     Application example after flat roof renovation or indoor or household use   1. Sweep up the gel created by applying Dryfix granules and pour it into a container. 2. Sprinkle some "Flu" granules on the gel and stir 3. Add more if necessary 4. Pour away the water             Application example for pipes, cables or toilets   1. Sprinkle some "Flu" granules directly onto the gel created by applying Dryfix granules and stir 2. Rinse with water         Important for flat roof renovation The "Flu" must not be used in strong sunlight because the resulting heat can damage the top layer of bitumen. This is especially true if the powder is left lying for a long time. In this case, we recommend not liquefying the drying granulate directly on the roof, but collecting it in a bucket and liquefying it there. Alternatively, the drying granulate can of course also be disposed of in a garbage bag.  

Read more less

Top price/performance The "H2000 professional" is a compact 2kW fan heater that can be connected to standard 230V household sockets. Ideal for heating rooms up to approx. 20m² on construction sites, but also for private use. The housing is made of robust metal with a practical handle, and the tubular air duct increases the throw compared to rectangular heaters. The device is fitted with a cable of approx. 1.6m in length and a three-pin Swiss plug. If required, suitable extension cables in various lengths can be ordered. Another important advantage of this heater is the position of the control, which is placed at the bottom of the device instead of at the top as usual. This protects the control from rising residual heat at the end of operation and thus from overheating of the electronics. This extends the life of the heater and prevents malfunctions. The function switch can be used to set the mode to either pure recirculation or heating mode. A continuously variable room thermostat keeps the temperature at the set value. When the desired temperature is reached, the heating switches off while the fan continues to run in order to always measure the correct temperature value in the room. design of this heater fan • Robust metal housing • Carrying handles • Room thermostat • Safety thermostat, protects against overheating • Incl. 1.6 m connection cable • Incl. cable and CH plug 230V, scope of delivery • Plug-in device • Carrying handle with two screws (can be easily mounted if required) • Cable approx. 1.60m / Q1.0mm² + Swiss plug T12 (3-pin, fits into a normal household socket)     How much heat do I need?   Our free heat requirement calculator helps you determine the required heating output for your rooms. Click here to go to the online calculator: Calculate heat requirement   Technical data  Performance 2 kW air volume flow 291 m³/h room thermostat 4 – 40 °C dimensions (HxWxD) 275x195x210 mm Weight 2.9 kg power consumption 8.6 A max. power connection 230 V / 50Hz connection cable 1.6 m Plug 230V, 3-pin (= normal household socket) protection class IP44 overheating protection at 55°C security certificates CE / LVD / EMC / RoHS / Erp thermostat continuously variable 2 levels 30 W (recirculation only) and 2 kW heating

Read more less

Top price / performance A compact, powerful 9 kW fan heater for heating construction sites and industrial spaces. It has a robust metal housing with a practical carrying handle. The device is fitted with a cable of approx. 1.4 m in length and a CEE16A plug (high voltage). If required, suitable extension cables in various lengths can be ordered. The "H9000 professional" impresses in several ways compared to conventional fan heaters in this category: • It is smaller and lighter, but no less robust and of high quality. • The tube shape concentrates the air better and thus achieves a higher air speed and thus a better throw distance of the warm air jet into the room. • Control at the bottom instead of at the top of the housing: This protects the control at the end of operation from rising residual heat and thus from overheating of the electronics. This extends the life of the heater and prevents malfunctions. - Removable feet: if required, the heater can also be easily screwed onto a wall bracket if it is to have a fixed place. The function switch allows the device to be set to 4500 or 9000 W heating power or to operate as a fan only. A room thermostat keeps the temperature at the set value. When the desired temperature is reached, the heating switches off while the fan continues to run to always measure the correct temperature in the room. These fan heaters are ideal for use in garages, workshops, storage rooms, shops, greenhouses, sports halls and factories, as well as for various other applications. design of this heater fan • Robust metal housing • Carrying handles • Room thermostat • Safety thermostat, protects against overheating • Incl. cable and plug scope of delivery • Plug-in device • Carrying handle with two screws (can be easily mounted if required) • Cable approx. 1.40 m / Q2.5 mm² + CEE plug 5-pin 16 A (red/round plug, corresponds to the Swiss standard)   How much heat do I need?   Our free heat requirement calculator helps you determine the required heating output for your rooms. Click here to go to the online calculator: Calculate heat requirement     Technical data   Heating capacity: 9 kW Levels: only recirculation 55 W / 4.5 kW / 9 kW Air volume: 701 m³/h Air speed: 6.4 m / sec. (our measurement) Room thermostat: continuously variable 4-40 °C Sound level: 63 dB(A) at 2.5 m distance Dimensions (H x W x D): 370 x 250 x 370 mm Weight: 6.4 kg Maximum input: 12.4 A Connection: 400V / 50Hz Cable / plug: approx. 1.4 m Q2.5 mm + EURO CEE16A Test certificates: CE / LVD / EMC / RoHS / Erp Protection class: IP44 automatic overheating protection at 60 °C

Read more less

DRYFIX absorbs moisture up to 200 times its own volume within a few minutes and turns it into a solid gel. This means that leaked liquids can be absorbed quickly and efficiently. The practical helper in the home on textiles, floors and furniture. Application examples in the household Absorbs spilled liquids, such as spilled drinks such as red wine or water, but also animal urine or vomit. What's interesting is that not only the liquid itself is bound by the gel, but also surrounding smaller particles such as animal hair, broken glass, etc. Odors are also trapped and largely absorbed. Tip: To reduce the volume when disposing of the product, the soaked granules can be dried in the sun, for example. This reduces the volume significantly. Instead of powder, a hardened lump forms (similar to sugar stored in too moist conditions). Easy to use   The powder is sprinkled directly into standing water or onto damp areas. It draws moisture into the pores and forms a compact (environmentally friendly) gel that also traps odors and small particles such as small pieces of glass.   Add more granules if necessary.   Remove gel from the work area with a broom.   Once the work is completed, the gel residue can simply be disposed of in the household waste.       Application examples professional application Water damage drying: The granules can be sprinkled directly onto standing water. They absorb the water and can then be swept away with a shovel and broom. Flat roof: By drying out wet flat roof areas with Dryfix, planned work can be carried out even when there is standing water. Fire department: In the case of water damage of all kinds, the use of Dryfix can create a solid dam in a very short time to prevent the water from spreading further. Sanitary: Binds standing water in pipes, toilet bowls, etc. safety notice • Causes serious eye irritation. • Keep out of the reach of children. • Wear eye protection. In case of contact with eyes: • Rinse gently with water for several minutes. • Remove any contact lenses if possible. • Continue rinsing. • If eye irritation persists: Get medical advice/attention. We ask you to dispose of the granulate and containers with your household waste

Read more less

Within a few minutes, DRYFIX absorbs water up to 200 times its own volume and transforms it into a solid gel. This allows work areas to be dried out quickly and efficiently and forms a dam that keeps incoming water away. Application examples professional application Water damage drying: The granules can be sprinkled directly onto standing water. They absorb the water and can then be swept away with a shovel and broom. Flat roof: By drying out wet flat roof areas with Dryfix, planned work can be carried out even when there is standing water. Fire department: In the case of water damage of all kinds, the use of Dryfix can create a solid dam in a very short time to prevent the water from spreading further. Sanitary: Binds standing water in pipes, toilet bowls, etc. Easy to use   The powder is sprinkled directly into the standing water in a circle or boundary around the work area. The water in the work area is completely absorbed and a dam of gel is created.   Add more granules if necessary.   Remove gel from the work area with a broom.   Once the work is completed, the gel residue can simply be disposed of in the household waste.       Application examples in the household Absorbs spilled liquids such as spilled drinks, animal urine and much more. What is interesting is that not only the liquid itself is bound by the gel, but also surrounding smaller particles such as animal hair, broken glass, etc. Tip: To reduce the volume when disposing of the product, the soaked granules can be dried in the sun, for example. This reduces the volume significantly. Instead of powder, a hardened lump forms (similar to sugar stored in too moist conditions). safety notice • Causes serious eye irritation. • Keep out of the reach of children. • Wear eye protection. In case of contact with eyes: • Rinse gently with water for several minutes. • Remove any contact lenses if possible. • Continue rinsing. • If eye irritation persists: Get medical advice/attention. We ask you to dispose of the granulate and containers with your household waste

Read more less

sold out until spring 2025 A powerful dehumidifier with a semi-professional design. The metal casing and the internal components are solid and durable. The X40 is particularly efficient in a classic basement environment, but also economical in consumption. service The target humidity can be set using the clear control panel on the top of the device. Once the target humidity is reached, the dehumidification operation pauses while only the ventilation continues to determine the current humidity. Various setting options are available:  continuous operation The device runs continuously and ignores the measured room humidity. This setting is useful if you want to dry laundry or when drying water damage.  Operation with selected target humidity 30 – 90% Any target humidity value between 30% and 90% can be selected at the touch of a button (5% increments). To prevent mold and odors, it is sufficient to maintain a humidity of around 60%. The ideal setting is therefore 55 or 60%. For economical operation, the software has a tolerance of 6% so that the compressor does not start at too short intervals. The set target humidity value corresponds to the average value +-3%. This means that the drying process runs until the set value is undershot by 3%. The operation then pauses until the set value is overshot by 3%. So if you select 55%, for example, the room humidity fluctuates between min. 52% - max. 58%. comfort mode The "Dryfix Intelligence" control automatically optimizes operation taking the room temperature into account: - If the ambient temperature is below 5° C, the compressor stops to prevent the unit from icing up. - When the ambient temperature is higher than 5°C and lower than 20°C, the device operates with a target humidity of 60%. - When the ambient temperature is higher than 20°C and lower than 27°C, the device operates with a target humidity of 55%. - If the ambient temperature is higher than 27° C, the device operates with a target humidity of 50%. large tank The condensate tank, which is inserted at the back, holds 6.5 liters and stops operation when it is full using the integrated float magnetically. The fill level is immediately visible on the front of the device: blue light = operation in progress, red light = tank full or not inserted correctly (operation is interrupted). The hose connection is located directly above the tank, through which the condensate can also be drained directly into a drain (suitable hose: 10 mm inner diameter).  Two ventilation levels The air flow is powerful. The slats at the top of the device can also be used to direct the dry air in a certain direction. This is very useful if, for example, you want to blow into a laundry hanger or onto a damp wall. Due to the powerful ventilation, the operating noise is easily audible (a noise comparable to that of a steam extractor). At the touch of a button, you can choose between weak (quieter) or strong ventilation. With this model, the compressor (= dehumidification) stops when the desired humidity is reached, while the fan runs continuously to circulate the room air. Features & advantages over other dehumidifiers: • Digital control panel for regulating the desired humidity • Automatic function, ie the dehumidification mode switches off automatically when the target humidity level is reached and also switches on again automatically when it becomes more humid (including a +/- 6% power saving function so that the device does not switch on and off unnecessarily often. • Automatic professional defrost function • Suitable for unattended use • Also suitable for continuous operation/continuous dehumidification • Optimized for use in classic basement environments • Power consumption of only 470W at 20°C/60% humidity (starting current max. 700W) • Equipped with a very reliable quality brand compressor • Comfort program with protection at unsuitably cold room temperatures • No adjustments in case of power failure (device continues where it was interrupted) • Auto-stop when condensate tank is full including warning light • Removable 6.5 liter condensate tank • Possibility of connecting a hose for continuous drainage of the condensate. • Absolutely maintenance-free / No separate or renewed coolant is required (closed circuit) • Very easy mobility thanks to side handles and castors • Washable air filter • Modern design and attractive appearance • The device is ready for use immediately (no installation or assembly required) • CFC free • CE, GS and RoHS tested • Latest, environmentally friendly refrigerant R290 (GWP: 3) usage examples Cellar damp : Ideal for damp cellars, old walls and laundry rooms. Eliminates musty smells, stops mold growth, decomposition of masonry and much more. Mobile clothes dryer : the device is also very popular as a mobile clothes dryer. Close the laundry room windows and doors and, depending on the size of the laundry room, the laundry will dry overnight. dehumidification performance The dryer can be used over a wide temperature range between +5°C and +35°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% humid: 40 liters (90%: 44 liters, 60%: 22 liters) 20°C / 80% humid: 22 liters (90%: 28 liters, 60%: 14 liters) 15°C / 80% humid: 18 liters (90%: 22 liters, 60%: 10 liters) 10°C / 80% humid: 12 liters (90%: 16 liters, 60%: 8 liters) 5°C / 80% humid: 9 liters (90%: 11 liters, 60%: 5 liters) HEPA filter option In addition to the standard filter, which filters the dust out of the air, a HEPA filter can be ordered for the X40. This HEPA filter cleans the air every time the device passes through with a purity rate of almost 100%. This means that even the finest particles such as pollen, fine dust, mold spores and other tiny contaminants are intercepted. Also viruses of all kinds (including corona). The filter is therefore highly recommended, for example in basements with mold infestation, but also when drying laundry so that flying pollen is not blown through the hanging laundry and contaminates it (e.g. in the case of pollen allergy). The HEPA filter is a consumable and cannot be washed. The price of CHF 38 includes the filter with holder. For repeat orders, the filter alone without holder can be reordered at a reduced price of CHF 29. scope of delivery Plug-in ready device, no assembly required. The optional HEPA filter is not included in the basic package.  Technical data   Tension 220V-240V / 50Hz power consumption max. 700W max. / 470W (at 20°C/60% RH) sound pressure level (our measurement) 1 m distance 56 dB(A), 2.5 m distance 54 dB(A) dehumidification performance max. 40 liters/day (30°C / 80% RH) drying clothes about 3-4 washing machine loads per day condensate tank Approx. 6.5 liters refrigerant: R290 / 148 gr. Dimensions (H x W x D) 540 x 400 x 310 mm Weight 23 kg cessation of operations Digital ambient temperature Manufacturer's specification 5°C ~ 35°C (our recommendation: from 7°C) Swiss plug Yes hose connection Yes / suitable hose 10mm inner diameter guarantee 2 years

Read more less

The Quadro X80 is a very powerful dehumidifier with a semi-professional design. The metal casing and the internal components are solid and durable. The X80 is particularly efficient in a classic basement environment, but also economical in consumption. service The target humidity can be set using the clear control panel on the top of the device. Once the target humidity is reached, the dehumidification operation pauses while only the ventilation continues to determine the current humidity. Various setting options are available:  continuous operation The device runs continuously and ignores the measured room humidity. This setting is useful if you want to dry laundry or when drying water damage.  Operation with selected target humidity 30 – 90% Any target humidity value between 30% and 90% can be selected at the touch of a button (5% increments). To prevent mold and odors, it is sufficient to maintain a humidity of around 60%. The ideal setting is therefore 55 or 60%. For economical operation, the software has a tolerance of 6% so that the compressor does not start at too short intervals. The set target humidity value corresponds to the average value +-3%. This means that the drying process runs until the set value is undershot by 3%. The operation then pauses until the set value is overshot by 3%. So if you select 55%, for example, the room humidity fluctuates between min. 52% - max. 58%. comfort mode The "Dryfix Intelligence" control automatically optimizes operation taking the room temperature into account: - If the ambient temperature is below 5° C, the compressor stops to prevent the unit from icing up. - When the ambient temperature is higher than 5°C and lower than 20°C, the device operates with a target humidity of 60%. - When the ambient temperature is higher than 20°C and lower than 27°C, the device operates with a target humidity of 55%. - If the ambient temperature is higher than 27° C, the device operates with a target humidity of 50%. large tank The condensate tank, which is inserted at the back, holds 6.5 liters and stops operation when it is full using the integrated float magnetically. The fill level is immediately visible on the front of the device: blue light = operation in progress, red light = tank full or not inserted correctly (operation is interrupted). The hose connection is located directly above the tank, through which the condensate can also be drained directly into a drain (suitable hose: 10 mm inner diameter).  Two ventilation levels The air flow is powerful. The slats at the top of the device can also be used to direct the dry air in a certain direction. This is very useful if, for example, you want to blow into a laundry line or onto a damp wall. Due to the powerful ventilation, the operating noise is easily audible (a noise comparable to that of a steam extractor). At the touch of a button, you can choose between weak (quieter) or strong ventilation. With this model, the compressor (= dehumidification) stops when the desired humidity is reached, while the fan runs continuously to circulate the room air. Features & advantages over other dehumidifiers: • Digital control panel for regulating the desired humidity • Automatic function, ie the dehumidification mode switches off automatically when the target humidity level is reached and also switches on again automatically when it becomes more humid (including a +/- 6% power saving function so that the device does not switch on and off unnecessarily often. • Automatic professional defrost function • Suitable for unattended use • Also suitable for continuous operation/continuous dehumidification • Optimized for use in classic basement environments • Low power consumption compared to the powerful performance • Equipped with a very reliable quality brand compressor • Comfort program with protection at unsuitably cold room temperatures • No adjustments in the event of a power failure (device continues where it was interrupted) • Auto-stop when condensate tank is full including warning light • Removable 6.5 liter condensate tank • Possibility of connecting a hose for continuous drainage of the condensate. • Absolutely maintenance-free / No separate or renewed coolant is required (closed circuit) • Very easy mobility thanks to side handles and castors • Washable air filter • Modern design and attractive appearance • The device is ready for use immediately (no installation or assembly required) • CFC free • CE, GS and RoHS tested • Latest, environmentally friendly refrigerant R290 (GWP: 3) usage examples Cellar damp : Ideal for damp cellars, old walls and laundry rooms. Eliminates musty smells, stops mold growth, decomposition of masonry and much more. Mobile clothes dryer : the device is also very popular as a mobile clothes dryer. Close the laundry room windows and doors and, depending on the size of the laundry room, the laundry will dry overnight. dehumidification performance The dryer can be used over a wide temperature range between +7°C and +35°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% humid: 80 liters (90%: 88 liters, 60%: 44 liters) 20°C / 80% humid: 44 liters (90%: 56 liters, 60%: 28 liters) 15°C / 80% humid: 36 liters (90%: 44 liters, 60%: 20 liters) 10°C / 80% humid: 24 liters (90%: 32 liters, 60%: 16 liters) 5°C / 80% humid: 18 liters (90%: 22 liters, 60%: 10 liters) HEPA filter option In addition to the standard filter, which filters dust out of the air, a HEPA filter can be ordered for the X80. This HEPA filter cleans the air every time it passes through the device with a purity rate of almost 100%. This means that even the finest particles such as pollen, fine dust, mold spores and other tiny contaminants are intercepted. Also viruses of all kinds (including corona). The filter is therefore highly recommended, for example in basements with mold infestation, but also when drying laundry so that flying pollen is not blown through the hanging laundry and contaminates it (e.g. in the case of pollen allergy). The HEPA filter is a consumable and cannot be washed. The price of CHF 38 includes the filter with holder. For repeat orders, the filter alone without holder can be reordered at a reduced price of CHF 29. scope of delivery Plug-in ready device, no assembly required. The optional HEPA filter is not included in the basic package.  Technical data  Tension 220V-240V / 50Hz power consumption max. 1291W max. / 940W (at 20°C/60% RH) sound pressure level 1 m distance 56 dB(A) (our measurement) 2.5 m distance 54 dB(A) (our measurement) dehumidification performance 80 liters/day (30°C / 80% RH) condensate tank Approx. 6.5 liters compressor rotary compressor refrigerant R290 / 180 g Dimensions (H x W x D) 64.5 x 40 x 31 cm Weight 24 kg cessation of operations Digital ambient temperature Manufacturer's information: 5°C - 35°C (our recommendation: 7°C ~ 35°C) application area general room dehumidification: up to approx. 200m² Laundry drying: dries 6-8 washing machine loads per day Swiss plug: Yes hose connection Yes guarantee 2 years

Read more less

The "Royal 12" is part of the latest series of Dryfix dehumidifiers. In addition to its attractive design, the Royal12 impresses with its whisper-quiet operating noise, which allows it to be used not only in damp basements, but also in living rooms, bedrooms and offices. Thanks to the latest technology, it is highly efficient and economical. The R290 refrigerant it contains has hardly any impact on the environment. The "Global Warming Potential (GWP)" is an incredible value of 3, which corresponds to a reduction of 99.85% compared to comparable models of previous generations!    service   The operation is controlled at the touch of a button via the clearly laid out control panel on the top. The display provides information about the set values ​​and the current measured humidity in the room. Setting the target humidity : the desired target humidity can be set at the touch of a button, i.e. the value at which the device should keep the room stable. If the measured humidity in the room is higher, the device will operate. If the humidity is correct, the device pauses, stopping not only the compressor but also the fan. This is an important point in terms of power consumption and distinguishes the "Royal" from many commercially available products on the market. The desired target humidity can be selected in 5% increments in the range between 30 - 80% relative humidity. To protect a room from mold and odors, a value of around 60% is sufficient, so the ideal setting is 55 or 60%. Lower values ​​do not provide any additional benefit, unless you are drying laundry or there is water damage.  Setting mode: There are three drying options to choose from. a) Continuous operation (for laundry/water damage) b) Room monitoring mode, when the humidity should not exceed a certain value c) Night mode, in which the ventilation is set to low and the lighting is minimized.  Ventilation setting: you can choose between strong and weak ventilation at the touch of a button. On the weak fan setting, operation is very quiet, on the stronger fan setting, the air volume increases, which is an advantage especially in larger rooms. The "Royal12" sucks in the moist room air at the back of the device, where it is cleaned by a removable large dust filter. The filter can be removed very easily and cleaned under water. It does not need to be replaced. The dry air is blown out at the top of the device. Timer: with the timer, operation can be limited either "from now" (1-12 hours) or started at a time 1-12 hours in the future, for example if you want to start operation at the low tariff. Memory function: If you want to run the device at the same time every day (for example during off-peak hours), you can do this with a standard timer. The "Royal12" remembers the last setting and returns with the same settings after a power failure. Key lock: Prevents unauthorized persons (e.g. children) from playing around with the device and changing the settings. Additional features • 3-color display: There is a light on the front that uses three colors to indicate whether the air is very dry, OK, or too humid. A quick glance at the device is enough to quickly find out about the condition of the air. • Mobile on wheels: Although the "Royal12" is one of the lightest dehumidifiers at 11kg, it has four wheels and is therefore easy to move around the room. There is also a recessed handle on the back, which makes it easy to carry the dehumidifier. • "Dryfix Intelligence": The software we have developed for particularly economical stop-and-go operation. Prevents the compressor from starting up too often and thus saves a lot of electricity. The software also checks whether the room temperature is too cold or too warm for operation and interrupts operation if necessary.     WIFI control WIFI control: In addition to the operation on the device itself, all models in the "Royal" series are equipped with WIFI control. The "Smart Life" app used for this purpose can be downloaded free of charge for iOS and Android. Minimum requirement: iPhone and iPod: iOS 11.0 or later Apple Watch: watchOS 6.0 or higher Android: newer mobile phone series from 2020, Android 5.0 or higher "Smart Life" is very simple and clear. It has been around for a number of household appliances for a long time and is therefore well developed and tested. To use the app, the dehumidifier only needs to be connected to WiFi in the house. Setting up the app once only takes a few minutes. Once set up, you can monitor and regulate your dehumidifier from anywhere in the world via your cell phone and also request real-time information about the current humidity in the room. This is very practical when traveling abroad and for use in holiday homes.  Advantages and Features • Dehumidification capacity of up to 12 litres per day (at a constant 30°C/80% RH), suitable for rooms up to 30m² • Color indicator for quick recognition of the room status • 12-hour timer to set the operating time • Low power consumption - very economical • Very quiet operation, the fan has two speed levels • Automatic self-defrosting at low room temperature • Auto mode: Switch off / restart automatically depending on room humidity • Electronic control • Antibacterial filter • 2 L water tank with viewing window and float (automatically stops when full), inserted in the back of the device • Direct hose connection (suitable hose has an inner diameter of 12mm) • WIFI-enabled • Automatic shutdown if the temperature is too cold or too warm • Memory function  dehumidification performance The dryer can be used over a wide temperature range between +5°C and +35°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C: 80% 12 liters / 24 h (60%: 7.5 L) 25°C: 80% 9 liters / 24 h (60%: 6 L) 20°C: 80% 7 liters / 24 h (60%: 4.5 L) 15°C: 80% 5 liters / 24 h (60%: 3.5 L) 10°C: 80% 2.5 liters / 24 h (60%: 1.5 L)  Technical data   Tension 220V-240V / 50Hz power consumption 140W at 20°C/60% RH, max. 185W/1A operating noise 1 m distance 2.5 m distance ?39dB(A) depending on fan speed ?36dB(A) depending on fan speed Min./Max. room size 4 / 30 m² dehumidification performance 12 liters/day (30°C / 80% RH) condensate tank about 2 liters compressor rotary compressor refrigerant R290, 55g Dimensions (H x W x D) 460 x 255 x 220 mm Weight 11 kg cessation of operations Digital ambient temperature 5°C ~ 35°C application area basement, hobby room, apartment, bedroom Swiss plug Yes hose connection Yes, suitable hose: 12mm inner diameter GWP (Global Warming Potential) 3 guarantee 2 years

Read more less

The "Royal 20" is part of the latest series of Dryfix dehumidifiers. In addition to a pretty design, the Royal20 impresses with a large bucket and economical operation. Ideal for keeping damp cellars dry and for supporting laundry drying. Thanks to the latest technology, it is highly efficient and economical. The R290 refrigerant it contains hardly has any impact on the environment. The "Global Warming Potential (GWP)" is an incredible value of 3, which corresponds to a reduction of 99.85% compared to comparable models of previous generations. service The operation is controlled at the touch of a button via the clearly laid out control panel on the top. The display provides information about the set values ​​and the current measured humidity in the room. Setting the target humidity : the desired target humidity can be set at the touch of a button, i.e. the value at which the device should keep the room stable. If the measured humidity in the room is higher, the device will operate. If the humidity is correct, the device pauses, stopping not only the compressor but also the fan. This is an important point in terms of power consumption and distinguishes the "Royal" from many commercially available products on the market. The desired target humidity can be selected in 5% increments in the range between 30 - 80% relative humidity. To protect a room from mold and odors, a value of around 60% is sufficient, so the ideal setting is 55 or 60%. Lower values ​​do not provide any additional benefit, unless you are drying laundry or there is water damage. Setting mode: There are three drying options to choose from. a) Continuous operation (for laundry/water damage) b) Room monitoring mode, when the humidity should not exceed a certain value c) Night mode, in which the ventilation is set to low and the lighting is minimized.  Ventilation setting: You can choose between strong and weak ventilation at the touch of a button. On the weak fan setting, operation is very quiet, on the stronger fan setting, the air volume increases, which is an advantage especially in larger rooms. The "Royal20" sucks in the moist room air at the back of the device, where it is cleaned by a removable coarse dust filter. The filter can be removed very easily and cleaned under water. It does not need to be replaced. The dry air outlet is at the top of the device. An internal counter reminds you after every 600 hours of operation (= approx. once a month) that the filter should be cleaned and pauses operation until the perfect condition of the filter is confirmed at the touch of a button (this confirmation is not possible via WLAN). Timer: With the timer, operation can either be limited to a time "from now" (1-12 hours) or to a time 1-12 hours in the future, for example if you want to start operation at the low tariff. Memory function: If you want to run the device at the same time every day (for example during off-peak hours), you can do this with a standard timer. The "Royal20" remembers the last setting and returns with the same settings after a power failure. Key lock: Prevents unauthorized persons (e.g. children) from playing around with the device and changing the settings. Additional features  3-color display: There is a light on the front that uses three colors to indicate whether the air is very dry, OK, or too humid. A quick glance at the device is enough to quickly find out about the condition of the air.  Mobile on wheels : The "Royal20" has four wheels, making it easy to move around the room. There are also two recessed handles on the side with which the dehumidifier can be lifted. " Dryfix Intelligence ": The software we have developed for particularly economical stop-and-go operation. Prevents the compressor from starting up too often and thus saves a lot of electricity. The software also checks whether the room temperature is too cold or too warm for operation and interrupts operation if necessary.  WIFI control WIFI control: In addition to the operation on the device itself, all models in the "Royal" series are equipped with WIFI control. The "Smart Life" app used for this purpose can be downloaded free of charge for iOS and Android. Minimum requirement: iPhone and iPod: iOS 11.0 or later Apple Watch: watchOS 6.0 or higher Android: newer mobile phone series from 2020, Android 5.0 or higher "Smart Life" is very simple and clear. It has been around for a number of household appliances for a long time and is therefore well developed and tested. To use the app, the dehumidifier only needs to be connected to WiFi in the house. Setting up the app once only takes a few minutes. Once set up, you can monitor and regulate your dehumidifier from anywhere in the world via your cell phone and also request real-time information about the current humidity in the room. This is very practical when traveling abroad and for use in holiday homes.     Advantages and Features  Dehumidification capacity of up to 20 liters per day (at constant 30°C/80% RH), suitable for rooms up to 50m² Color indicator for quick recognition of the room condition 12-hour timer to set the operating time Low power consumption - very economical Very quiet operation, the fan has two speed levels Automatic self-defrosting at low room temperature Auto mode: Shutdown / restart automatically depending on room humidity Electronic control Antibacterial filter 6.5 L water tank with viewing window and float (automatically stops when full), inserted in the back of the device Direct hose connection (suitable hose has an inner diameter of 10mm) WIFI-enabled Automatic interruption of operation if the temperature is unsuitably cold or too warm memory function   Technical data  Tension 220V-240V / 50Hz power consumption 250W (at 20°C/60% RH), max. 370W/2.2A operating noise 1 m distance 2.5 m distance ?48dB(A) depending on fan speed ?45dB(A) depending on fan speed Min./Max. room size 4 / 50 m² dehumidification performance 20 liters/day (30°C / 80% RH) condensate tank Approx. 6.5 liters compressor rotary compressor refrigerant R290, 58g Dimensions (H x W x D) 500 x 340 x 240 mm Weight 14 kg cessation of operations Digital ambient temperature 5°C ~ 35°C application area basement, hobby room, apartment, bedroom Swiss plug Yes hose connection Yes, suitable hose: 12mm inner diameter GWP (Global Warming Potential) 3 guarantee 2 years

Read more less

Thanks to the latest technology, the "Royal24" is highly efficient and economical. The R290 refrigerant it contains has hardly any impact on the environment. The "Global Warming Potential (GWP)" is an incredible value of 3, which corresponds to a reduction of 99.85% compared to comparable models of previous generations! It is also significantly quieter in terms of operating noise than other devices in the same performance category. The WIFI function is a practical addition, but as with all models in the "Dryfix Royal" series, the device can also be adjusted in a "traditional" way via the control panel directly on the device.     service The "Royal24" can be operated directly via WIFI as well as via a control panel on the top of the housing. Setting the target humidity: The desired target humidity can be set at the touch of a button, i.e. the value at which the device should keep the room stable. If the measured humidity in the room is higher, the device will operate. If the humidity is correct, the device pauses, stopping not only the compressor but also the fan. This is an important point in terms of power consumption and distinguishes the "Royal" from many commercially available products on the market. The desired target humidity can be selected in 5% increments in the range between 30 - 80% relative humidity. To protect a room from mold and odors, a value of around 60% is sufficient, so the ideal setting is 55 or 60%. Lower values ​​do not provide any additional benefit, unless you are drying laundry or there is water damage. Setting mode: There are three drying options to choose from. a) Continuous operation (for drying laundry) b) Room monitoring mode, when the humidity should not exceed a certain value. c) Night mode, in which the ventilation is set to low and the lighting is minimized. Ventilation setting: You can choose between strong and weak ventilation at the touch of a button. On the weak fan setting, operation is very quiet, on the stronger fan setting, the air volume increases, which is an advantage especially in larger rooms. The "Royal24" sucks in the moist room air at the back of the device, where it is cleaned by a removable coarse dust filter. The filter can be removed very easily and cleaned under water. It does not need to be replaced. An internal counter reminds you that the filter should be cleaned after every 600 hours of operation (= approx. once a month). The dry air outlet is at the top of the device. Timer: with the timer, operation can be limited either "from now" (1-12 hours) or started at a time 1-12 hours in the future, for example if you want to start operation at the low tariff. Memory function: If you want to run the device at the same time every day (for example during off-peak hours), you can do this with a standard timer. The "Royal24" remembers the last setting and returns with the same settings after a power failure. Key lock: Prevents unauthorized persons (e.g. children) from playing around with the device and changing the settings. Additional features: 3-color display : There is a light on the front that uses three colors to indicate whether the air is very dry, OK, or too humid. A quick glance at the device is enough to quickly find out about the condition of the air. Mobile on wheels : The "Royal24" has four wheels, making it easy to move around the room. There are also two recessed handles on the side with which the dehumidifier can be lifted. " Dryfix Intelligence ": The software we have developed for particularly economical stop-and-go operation. Prevents the compressor from starting up too often and thus saves a lot of electricity. The software also checks whether the room temperature is too cold or too warm for operation and interrupts operation if necessary. WIFI control WIFI control: In addition to the operation on the device itself, all models in the "Royal" series are equipped with WIFI control. The "Smart Life" app used for this purpose can be downloaded free of charge for iOS and Android. Minimum requirement: iPhone and iPod: iOS 11.0 or later Apple Watch: watchOS 6.0 or higher Android: newer mobile phone series from 2020, Android 5.0 or higher "Smart Life" is very simple and clear. It has been around for a number of household appliances for a long time and is therefore well developed and tested. To use the app, the dehumidifier only needs to be connected to WiFi in the house. Setting up the app once only takes a few minutes. Once set up, you can monitor and regulate your dehumidifier from anywhere in the world via your cell phone and also request real-time information about the current humidity in the room. This is very practical when traveling abroad and for use in holiday homes. Advantages and Features • Dehumidification capacity of up to 24 litres per day (at a constant 30°C/80% RH), suitable for rooms up to 60m² • Mobile tumble dryer: in at least slightly temperate rooms, the "Royal24" can dry 1-2 washing machine loads per day. • Color indicator for quick recognition of the room status • 24-hour timer to set the operating time • Very low power consumption - energy efficient • For this performance class, significantly quieter operation than other devices, fan has two speed levels • Automatic defrosting at low temperature • Auto mode: Switch off / restart automatically depending on room humidity • Electronic control • Antibacterial filter • 5 L water tank with viewing window and float (automatically stops operation when full), inserted at the side • Direct hose connection (suitable hose: 10mm inner diameter) • WIFI-enabled • optional HEPA filter • Automatic shutdown if the temperature is too cold or too warm   Optional HEPA filter A suitable HEPA filter is available for this model if required. This can be ordered from us as an additional option (not included with the device). The HEPA filter cleans the air of fine dust, pollen, viruses and bacteria with a purity rate of almost 100%. When drying laundry in particular, allergy sufferers appreciate that pollen flying around the room is caught by the filter and is therefore not absorbed by hanging items of clothing or bed linen. The "Royal24" can also be used with the HEPA filter as an air purifier without dehumidification.    scope of delivery The scope of delivery includes the plug-in device including a connection cable with Swiss plug and a short piece of hose for the direct drainage of the condensate . Technical data Tension 220V-240V / 50Hz power consumption 250W at 20°C/60% RH, max. 380W/1.25A operating noise 1 m distance 2.5 m distance ?46dB(A) depending on fan speed ?43dB(A) depending on fan speed Min./Max. room size 4 / 60 m² dehumidification performance 24 liters/day (30°C / 80% RH) condensate tank Approx. 5 liters compressor rotary compressor refrigerant R290, 75g Dimensions (H x W x D) 565 x 355 x 220 mm Weight 13.5 kg cessation of operations Digital ambient temperature 5°C ~ 35°C application area basement, hobby room, apartment, bedroom, laundry drying Swiss plug Yes hose connection Yes, suitable hose inner diameter 10mm Global Warming Potential (GWP) 3 guarantee 2 years

Read more less