The AB-10 is a powerful, versatile fan made of robust plastic. The radial flywheel pushes the air drawn in from the side forwards with a lot of pressure. A hose distributor attachment can optionally be attached to the air outlet side.
possible uses
The fans can be used in a variety of ways, for example:
• for commercial use on construction sites to accelerate building drying
• for drying water damage
• for removing fumes
• as a carpet dryer
3 different positions
The fans can be installed in three positions:
horizontal - blowing straight forward: this position pushes the air horizontally across the floor and drives moisture in carpets or from underlays into the room air. This speeds up the drying of the underlay massively.
45° inclined - blowing out diagonally upwards: For example, if damp walls or hanging objects need to be dried.
Tilted 90° - blowing out upwards: for drying ceilings or for more even air distribution in rooms without stirring up dust.
Characteristics
• Maximum air volume of 4500 m³/h
• Three fan speeds (1 = 520W, 2 = 550 Watt, 3 = 620 Watt)
• Impact-resistant housing made of robust “Linear Rotational Plastic” (rotated plastic)
• Strong high-performance single-phase motor with starting and working capacitor (PSC motor)
• Operation and air flow possible in three different positions (air angle positions 0°, 45°, 90°)
• Easy to carry and transport thanks to its compact design and handy carrying handle
• The device is ready for use immediately (no installation or assembly required)
• No adjustments in case of power failure (device continues where it was interrupted)
• Stackable (several identical devices can be stacked on top of each other for operation and storage)
continuous operation
This fan is designed for high air circulation, even over long periods of time. However, to avoid excessive wear, it should be switched off for 1-2 hours after 48 hours of continuous operation so that the motor can cool down completely.
Technical data
| Tension
|
230V ~ 50Hz
|
| Max. power consumption |
880 W (3.9 A)
|
| Max. air circulation
|
4500 m 3 /h
|
| fan speeds
|
3 (3 = 620W, 2 = 550W, 1 = 520W)
|
| Max. speed
|
1300 rpm
|
| dimensions (H x W x D)
|
51 x 43 x 48 cm
|
| Weight
|
12.6 kg
|
| cessation of operations
|
rotary switch
|
| Swiss plug
|
Yes, 3m cable
|
| guarantee
|
2 years |
