This compact mini anemometer is the ideal tool for easy flow velocity measurements in many areas. The measurement display can be variably switched to many units: For example, measure wind speeds in kilometers or miles per hour, the performance of fans or ventilation systems, and the flow velocity of gases in meters per second or feet per minute. In addition, wind speeds can also be displayed in nautical miles (knots). This makes it an ideal tool for all sports and leisure activities where the wind plays a role: sailing, surfing or hang gliding.  Practical Details The sensor-controlled display lighting is automatically activated in poor lighting conditions and the energy-saving magnetic impeller increases the battery life of the anemometer.   Advantages at a glance  • Fast and easy measurement of the flow velocity of wind, air or gases • Optimal price-performance ratio • Display of maximum value and average value • Simple one-handed operation • Magnetic impeller • Sensor-controlled display lighting in poor lighting conditions • Automatic shutdown • Tripod thread • Practice-optimized German industrial design - protected design   scope of delivery • Measuring device • Battery • Operating instructions     Technical data   air flow measurement measuring range accuracy resolution measuring principle 1.1 to 30 m/s 3% (=0.3 m/s) 0.01 m/s impeller display LCD interfaces USB energy supply 9V block battery ambient temperature 0 °C to +50 °C Dimensions L x W x H 167 x 56 x 34 mm Weight 139 g tripod thread yes, 1/4 inch Automatic shutdown Yes Trotec article no. 3,510,205,042 guarantee 2 years  

Read more less

Quick and easy measurements of air speed, air temperature and air volume flow are no problem with this flexible device. It is ready for use immediately and shows the measured values ​​clearly on the large, backlit display.   In addition, the minimum or maximum value can be displayed and the current measured value can be recorded. The flexibly adjustable and 40 cm long gooseneck enables the measurement to be carried out even in hard-to-reach places or at distant supply air and exhaust openings - ideal, for example, for HSK installers for measuring exhaust grilles, ducts and swirl outlets. The device is also ideal for amateur athletes to determine wind strength or to monitor the performance of household appliances such as air conditioning systems and cooling fans in IT areas.   Advantages at a glance   • Measurement of air velocity (in m/s, mph, km/h, kn, ft/min) and air volume flow (m³/min) • Air temperature (in °C and °F) • Optimal price-performance ratio • Minimum value, maximum value and hold function • Semi-flexible, 40 cm long gooseneck probe • Backlit display • Soft-touch function keys • Automatic shutdown   scope of delivery   measuring device, battery, carrying case, operating instructions     Technical data   air flow measurement measuring range accuracy resolution measuring principle  1 - 30 m/s 3% (=0.2 m/s) 0.01 m/s impeller  measurement of air volume flow measuring range  1 to 999.9 m³/min  measuring air temperature measuring range accuracy resolution  -10 °C to +60 °C ± 1.5°C 0.1 °C  display LCD energy supply 9V block battery ambient temperature 0 °C to +50 °C Dimensions (without gooseneck) L x W x H 165 x 54 x 32 mm Weight 270 g tripod thread no Automatic shutdown Yes Trotec article no. 3,510,205,043 guarantee 2 years

Read more less

As a thermal anemometer, this handheld measuring device impresses with its high measurement sensitivity and is particularly suitable for the precise determination of even low flow velocities. It is ready for use immediately, can be easily connected to the app and displays all measured values ​​on the mobile device.   Thanks to the clever combination of appSensor and the associated, free app Multimeasure Mobile, users benefit in practice from numerous advantages in terms of flexibility, analysis functions, data control and documentation.   Compare the data you have collected directly on your mobile device or use the measured values ​​in combination for differentiated analyses on site. The probe design, which can be continuously adjusted in length, and numerous useful features enable universal use for many measuring tasks.   The logging function for long-term measurements, the diagram representation of your measurement data or its export to further analysis software as well as the option to create a report are helpful. From performance monitoring of household appliances to air conditioning and ventilation systems to cooling fans in the IT sector, this measuring device is an ideal companion for flow measurements, even in hard-to-reach places.     app sensor Trotec app sensors are compact precision measuring devices. They have high-quality, energy- and space-saving sensors. The data is displayed, operated and evaluated via the connected smartphone. In combination with the free "MultiMeasure Mobile" app, this measuring device concept offers many convincing advantages.     Advantages at a glance   • Fast and easy measurement of air velocity, air temperature and air volume flow (CMM) • Extendable, 375 mm long telescopic probe • High-quality sensors and numerous measuring functions • Professional sensors for precise measurement results • Additional determination and display of minimum value, maximum value or average value • Measurement data storage, logging and alarm function • Intelligent combination of appSensor and the MultiMeasure Mobile app • Easy app connection and control via Bluetooth with optical connection confirmation via LED on the device • Easy measurement data acquisition even at remote locations, as the values ​​do not have to be read directly on the measuring device • Automatic shutdown • Hand strap for safe handling included     "MultiMeasure Mobile" – Free app for iOS and Android   To operate this appSensor on your smartphone, you need MultiMeasure Mobile – a free app for controlling, evaluating and displaying measurement data from all Trotec appSensors connected to your mobile device.   MultiMeasure Mobile offers you a variety of benefits: • Auto-detection for appSensors • Parallel operation of several appSensors • Fast and intuitive navigation • Measured value display numerically or as a diagram?/?Matrix • Integrated report function for on-site documentation • Organizer function for measurement data and documents • Customer management already integrated • Various analysis options directly in the app • Photo-linked measurement value storage • Matrix measurements, also photo-linked • Complete data synchronization to MultiMeasure Professional via Cloud   All app sensors are automatically recognized by "MultiMeasure Mobile" and can be connected to the app and read via Bluetooth. Operation is just as simple and intuitive as installation. Simply download MultiMeasure Mobile to your mobile device for free.         Technical data   flow velocity measuring range             0 - 30 m/s (resolution 0.01) 0 - 67 mph (resolution 0.01) 0 - 108 km/h (resolution 0.01) 0 - 58 kn (resolution 0.01) 0 - 5900 ft/min (resolution 1.0)   temperature measuring range     accuracy       -20 °C - +60 °C (resolution 0.1) -4 °F - +140 °F (resolution 0.1)   ±0.8 °C (-20 °C - 0 °C) ±0.5 °C (0 - +60 °C)   moisture measuring range   accuracy       10 - 90 % RH (resolution 0.1)   ±3.5 % RH (20 % - 80 % RH) ±5% RH (0% - 20% and 80% - 100% RH)   Bluetooth 4.0 BLE, 10 m range in open area energy supply 3 x 1.5V, AAA batteries Dimensions (L x W x H) device 320 x 36 x 22 mm Telescopic probe extendable approx. 235 mm Weight 122 g Trotec article no. 3,510,206,043 guarantee 2 years

Read more less

Thanks to the combination of simple one-handed operation and precise measuring technology, this device delivers precise measurements of the temperature and relative humidity of the ambient air in a matter of seconds. The dew point and wet bulb temperature measurements, which are also integrated, provide further useful information for controlling the building's climate. In this way, changes in the climate value in different room zones can be determined very easily.   Practical detail: Thanks to the Min/Max function, the minimum or maximum value of the current measurement can be displayed on the automatically illuminated LCD display.     functions   • Maximum and minimum value display • Temperature display in °C and °F • Automatic display lighting • Automatic shutdown     Advantages at a glance   • Measurement of a wide range of climate data with just one device: relative humidity, air temperature, dew point and wet bulb temperature • Optimal price-performance ratio • Dual measurement value display • Minimum and maximum value function • Simple one-handed operation • Automatic display lighting • Automatic shutdown     scope of delivery   • Measuring device • Battery • Operating instructions     Technical data   air temperature     Measuring range: -20 °C to +60 °C (-4 °F to +140 °F) Resolution: 0.1 °C (0.1 °F) Accuracy: ± 1 °C (at 0 °C to 40 °C); ± 2 °C (at -20 °C to 0 °C and 40 °C to 60 °C) humidity     Measuring range: 0 to 100 % RH Resolution: 0.1 % RH Accuracy: ± 3.5 % RH (at 20 % to 80 % RH); ± 5 % RH (at 0 to 20 % and 80 to 100 % RH) Dimensions (L x W x H) 146 x 56 x 34 mm Weight approx. 145 g Trotec article no. 3,510,205,005 guarantee 2 years

Read more less

This practical mini laser has everything a rangefinder needs. This includes precise laser measurement of distances, areas and volumes. Surprisingly diverse features with helpful functions and simple and intuitive operation. It is very small and light and fits in any pocket.     Excellent price-performance ratio   Despite its very low price, the measuring device impresses with its quality and functionality. Distances of up to 30 meters, areas and volumes are measured quickly but also precisely. The deviation is a maximum of 3 millimeters.   The device also scores points with the 'single' and 'double' Pythagoras: Both are indispensable functions that allow, for example, the indirect calculation of distance or height in addition to checking a right angle. The handheld laser meter also has other useful functions such as a continuous measurement mode, the addition and subtraction of measurement results and the automatic storage of the last 10 measurements.     Well-thought-out equipment   Both the simple operating instructions and the practice-optimized features of the handheld laser meter make this small measuring device very useful. • Automatic switch-off for the laser after 30 seconds • Automatic switch-off for the entire measuring instrument after 3 minutes • Encased in a robust, dust and splash-proof housing • Protection class IP54   The integrated lithium-ion battery can be charged quickly and easily using the micro USB cable included in delivery.     Advantages at a glance   • 0.05 m to 30 m range • Indirect distance and height or partial height calculation (3-point Pythagoras functions) • Precise, instantaneous measurement of distances, areas and volumes • Backlit multi-line display • Continuous measurement mode with min/max function • Addition and subtraction of measurement results • Automatic storage of the last 10 measured values • Robust workmanship – dust and splash-proof (IP54) • Measure from the front and rear edges • Battery status indicator • Automatic shutdown • Hand strap • 3.7 V (200 mAh) lithium-ion battery, rechargeable via micro USB cable     scope of delivery   • Measuring device • Li-Ion battery (integrated) • Hand strap • Micro-USB cable • Operating instructions     Technical data   measuring range distance resolution accuracy 0.05 - 30 m (= 0.17 - 98 ft) 1 mm ±3mm laser point at a distance of 10 m at a distance of 20 m at a distance of 30 m 10 mm 12 mm 20 mm laser class 2 laser power < 1 mW (620 - 690 nm) memory Retrieve last 10 measurements energy supply Li-Ion battery 3.7 V (integrated) 200mAh, 2000 measurements per battery charge protection class IP54 Dimensions (H x W x D) 75 x 34 x 15 mm Weight 24 g Ambient temperature operation / storage 0 - 40 °C / -20 - 70 °C Trotec article no. 3,510,205,153 guarantee 2 years

Read more less

Easy to use, equipped with a high level of functionality and therefore suitable for a variety of different applications and measuring applications. This sums up the advantageous properties of the handy and only 130 g lightweight distance measuring device. With its versatile application possibilities, it is equally suitable for architects, engineers and also craftsmen (e.g. floor fitters, painters and varnishers, drywallers, etc.) and ambitious do-it-yourselfers.     Easy measurement of distance, area and circumference   This device can be used to quickly and easily determine distances, areas and volumes indoors. A Pythagoras function is integrated for indirect measurements (e.g. height measurements of walls or shelves). The timer allows a delayed measurement after 10 seconds. In addition, the all-rounder scores with a built-in measuring wheel to measure even curved lines, curves and circle circumferences in a range of 0 to 10 meters.     Professional measuring technology at a DIY price   With a maximum measuring range of 50 m, a measuring accuracy of +/- 2 mm and extensive comfort features, this measuring device is in no way inferior to even much more expensive models.     Designed for rough construction site use   Thanks to its robust housing, the device is also suitable for use in harsher environments such as on construction sites or in industry. All-round rubber coating with edge protection provides safe fall protection. Non-slip soft-grip inserts in the measuring device also ensure a secure grip in all measuring positions.     Clear view of precise measurement results   The measured data or calculations are clearly displayed on the backlit multi-line display and are also saved in the internal data memory (max. 50 measurements). Addition and subtraction of the measured data is possible, as are continuous measurements with MIN/MAX function.     With spirit level   A spirit level integrated into the housing makes it easier to align the device accurately. This practical spirit level can also be used on the construction site, for example to measure inclinations and uneven ground or to optimally align objects with one another.     Automatic shutdown when not in use   An intelligent automatic switch-off function ensures maximum operating time. If not in use, the laser switches off automatically after 30 seconds and the entire device after 3 minutes. This intelligent power-saving function is particularly useful in hectic everyday construction site life and significantly extends the battery life. The batteries required for operation (2 x 1.5 V AAA batteries) are already included in the scope of delivery.     scope of delivery • Measuring device • Batteries • Quick start guide     Advantages at a glance   • 0.05m to 50m distance measurement • Indirect distance and height or partial height calculation (3-point Pythagoras functions) • Precise and instantaneous measurement of distances, areas and volumes • Integrated measuring wheel for measuring curved lines, curves and circle circumferences (measuring range 0 to 10 m) • Integrated spirit level for precise alignment • Backlit multi-line display • Continuous measurement mode with MIN/MAX function • Addition and subtraction of measurement results • Automatic storage of the last 50 measured values • Robust workmanship for rough construction site use • Measure from the front and rear edges • Battery status indicator • Power-saving automatic switch-off   Technical data   distance measurement measuring range resolution Measurement accuracy typ.   0.05 - 50.00 m 1 mm ±2 mm   Laser Ø laser point at a distance of 6 m Ø laser point at a distance of 11 m Ø laser point at a distance of 18 m laser class laser power     10 mmm 20 mm 30 mm 2 < 1 mW   memory last 50 measurements energy supply Battery (2 x 1.5V AAA, included) ambient temperature 0 - 40 °C Dimensions (L x W x H) 130 x 51 x 28 mm Weight 130 g Selectable units Meter, Feet, Inch Trotec article no. 3,510,205,158 guarantee 2 years

Read more less

Immediately after switching on, the battery-operated laser, which can therefore be used conveniently anywhere, projects a right-angled cross or, optionally, a single horizontal or vertical line onto the opposite object surface. And because the device is self-leveling, the projected lines in this mode are always 100% horizontal/vertical.   The leveling mode automatically compensates for unevenness in the surface up to a 4° inclination. If self-leveling is not possible due to larger unevenness, the laser warns with a red flashing LED on the device and a pulsating laser cross on the projection surface. Where previously you had to laboriously use a spirit level and pencil, modern laser technology now helps.   Despite the latest technology, it is so easy to use that not only experienced craftsmen can benefit from its practical advantages, but also DIY enthusiasts with less experience can create both perfect right-angled and angle-independent laser guide lines.   Thanks to its lightweight and compact design and the multifunctional holder included in the delivery, the device is extremely mobile. In addition to a ¼-inch thread for fixing to standard tripods, it also has an integrated suction cup on the holder, which can be used to easily attach it to windows or smooth tiles, for example.     Advantages at a glance   • Projects bright laser lines over a distance of up to 10 m • Self-leveling laser (±4 °) – always automatically aligned straight • Laser projection selectable as cross lines and horizontal or vertical single lines • High accuracy of only ± 0.8 mm/m (at 0°) • Ideal for quick and straight alignment of drill holes, pictures, tiles, wallpaper strips, wall cabinets, shelves, etc. • Includes multifunctional combination mount with universal clamp plus suction cup • State-of-the-art laser technology with ultra-easy handling • Extremely light and ultra-compact • Thanks to battery operation, it can be used anywhere at any time • Laser locking function for projecting even diagonal lines • Operating switch with transport position for secure position fixation of the laser when changing location • Integrated ¼-inch tripod mount   Technical data   Auto-Leveling area ±4 ° Accuracy - Laser ±0.8 mm/m (at 0 °) Accuracy - Laser ±1 mm/m (at ?4 °) reach 10 m laser class 2 laser power < 1 mW wavelength 650 nm multifunctional LED Yes Dimensions H x W x D 72 x 60 x 83 mm Weight 275g buttons and slide switches Yes housing plastic protection class IP40 power supply 2 x 1.5V AA batteries (included) ambient temperature -20 °C to +50°C Gimbal auto-leveling Yes Projection of cross and single lines Yes Laser locking function (transport protection) Yes tripod thread yes, 1/4-inch tripod Multifunctional holder arm (included) Trotec article no. 3,510,205,151 guarantee 2 years

Read more less

The battery-operated 360° laser, which can be used anywhere, uses the all-round projection of a horizontal laser line at the touch of a button to make it easier to attach or mark wallpaper borders, wall tiles, paint edges, wall cabinets or drill precisely placed dowel holes at a uniform height. And all this on all four walls at the same time.   If required, it also projects a vertical laser line onto the opposite wall, for example to align pictures and shelves on this right-angled laser cross or to lay tiles in a precise grid. The projection of an oblique marking line at a freely adjustable angle of inclination is also possible in no time at all. This makes even the otherwise tricky installation of a stair railing installed parallel to the steps child's play.   The combination bracket with universal clamp and suction cup included in the delivery allows a variety of attachment options to objects and surfaces such as glass, panels, a shelf or a ladder. This means that the laser can be easily secured anywhere and can be aligned and tilted exactly as you need it for your work using the adjustable joint on the combination bracket. The high-quality housing of the 360° laser is made of painted aluminum and is therefore ideally suited for the rugged everyday use of the practice.   The integrated laser is self-leveling and compensates for uneven floors up to 3° fully automatically. Self-alignment only takes a few seconds and takes place immediately after the device is switched on. If self-leveling is not possible due to large unevenness or dirt, the laser signals this with a red LED and flashing laser lines.   Three projection modes for almost all alignment work and the multifunctional combination mount make the compact laser, which weighs just 280g, an indispensable precision tool for handicrafts and DIY enthusiasts. With the ¼-inch thread in the base of the device, the device can also be attached to standard tripods, including our universal tripod, which you can order as an accessory.   The integrated lithium-ion battery of the latest generation ensures long-lasting performance and maximum operating times. Even in daily use with frequent partial discharges, the Li-ion battery guarantees a long service life without the memory effect known from conventional NiCd batteries.     Advantages at a glance   • 3 projection modes: 360° horizontal operation, cross line operation, 90° vertical operation • Projects bright laser lines up to 10 m away • Self-leveling rotary laser – always automatically aligned straight • High accuracy of only ± 0.8 mm/m (at 0°) • Ideal for quick and straight alignment of drill holes, pictures, panels, wallpaper strips, wall cabinets, shelves, etc. • Visual warning when outside the auto-leveling range • Includes multifunctional combination mount with universal clamp plus suction cup • State-of-the-art laser technology with ultra-easy handling • Extremely light and ultra-compact • Thanks to battery operation, it can be used anywhere at any time • Durable Li-Ion battery with long service life for maximum operating times • Laser locking function for projecting even diagonal lines • Operating switch with transport position for secure position fixation of the laser when changing location • Integrated ¼-inch tripod thread • Robust aluminum housing • Fast charging via included micro USB cable • Telescopic tripod available as optional accessory scope of delivery   • Measuring device • multifunctional support arm • Micro-USB cable • Charger (USB 5V, 1A) • Quick start guide     product video   Technical data  voltage 220 - 240 V/50 Hz Auto-Leveling area ±3 ° Accuracy - Laser ±0.8 mm/m (at 0 °) Accuracy - Laser ±1 mm/m (at ?3 °) reach 10 m laser class 2 laser power < 1 mW wavelength 650 nm Dimensions H x W x D 115x 60 x 60 mm Weight 280g protection class IP40 display status LEDs (red/green) Housing aluminum power supply 1 x 3.7 V Li-Ion battery internal (included) ambient temperature 0 °C to +40°C Gimbal auto-leveling Yes Projection of cross and single lines yes (360° horizontal, 90° vertical) Laser locking function (transport protection) Yes tripod thread yes, 1/4-inch tripod Multifunctional holder arm (included) Trotec article no. 3,510,205,152 guarantee 2 years

Read more less

This compact multifunctional measuring device combines the functionality of three useful measuring tools (laser rangefinder, cross line laser, tape measure) and is therefore recommended for every pocket of both ambitious DIY enthusiasts and commercial users (e.g. architects, engineers, interior designers, craftsmen).     Uncomplicated distance, area and circumference measurements   As a classic laser distance measuring device, the device easily measures distances of up to 40 m, areas and volumes indoors. For maximum economical use of materials during renovation work, the precise calculation of floor, ceiling or wall areas is one of the easiest tasks for the laser distance meter. A Pythagoras function is also integrated to carry out indirect laser measurements (e.g. height measurements of walls or furniture).     Cross line laser and tape measure included   An integrated cross line laser projects bright laser lines onto surfaces when required, for example to optimally align drill holes, pictures, tiles, wallpaper strips, wall cabinets or shelves. An integrated tape measure (5 m) with a practical return button is ideal for manual measurements in hard-to-reach places.   The outstanding features of the measuring device, which weighs just 295 g, are completed by a practical wrist strap and a belt clip integrated into the device housing.     Multifunctional professional measuring technology at a DIY price   Thanks to its high measuring range of 40 m (laser measurement) and the integrated 5-meter tape measure, the 3-in-1 multifunctional measuring device is recommended for almost all surveying work at home, for hobbies and for crafts.     Designed for rough construction site use   Thanks to its robust housing, the device can withstand even adverse conditions on the construction site. A secure grip in all measuring positions and additional fall protection are provided by an all-round rubber coating in the form of non-slip soft-grip inserts.     Clear view of precise measurement results   The data determined via laser measurement are clearly displayed on the backlit multi-line display and are also saved in the internal data memory (max. 20 measurements). Addition and subtraction of the measurement data is possible, as are continuous measurements with MIN/MAX function (setting function).     Thinks for yourself and switches off automatically when not in use   To ensure maximum operating time, the measuring device has an intelligent automatic switch-off function that automatically switches off the laser after 30 seconds and the entire device after 2 minutes if not in use. This intelligent power-saving function is particularly useful in hectic everyday life on a construction site. The batteries required for operation (2 x 1.5 V AAA batteries) are already included in the scope of delivery.     Advantages at a glance   • 0.05m to 40m laser distance measurement • Indirect distance and height or partial height calculation (3-point Pythagoras functions) • Precise and instantaneous measurement of distances, areas and volumes • Integrated cross line laser (10 m range) • Integrated tape measure (5 m length) • Backlit multi-line display • Continuous measurement mode with MIN / MAX function • Addition and subtraction of measurement results • Automatic storage of the last 20 measured values • Robust workmanship for rough construction site use • Battery status indicator • Power-saving automatic switch-off   Technical data   measuring range 0.05 - 40 m resolution 1 mm measurement accuracy - laser ±0.2 mm Ø laser point at 10 mm distance Ø laser point at 20 mm distance Ø laser point at 30 mm distance 6 mm 11 mm 18 mm reach 10 m laser class 2 laser power < 1 mW Retrieve last measurements 20 Dimensions H x W x D 85 x 82 x 56 mm Weight 290g ambient temperature min. 0°C - max. +40 °C power supply 2 x 1.5V, AAA batteries (included) Trotec article no. 3,510,205,157 guarantee 2 years

Read more less

This easy-to-use hand-held measuring device is part of the basic equipment of every DIY enthusiast and craftsman. This practical quick measuring device reliably detects voltage sources from just 5 volts up to 1000 volts or from 50 Hz to 400 Hz.   The sensitivity can be continuously adjusted using the rotary control on the side of the voltage detector. This allows you to finely pre-adjust the measuring range to the expected voltage. It is ideal if, for example, you want to find a broken cable or to determine the presence of alternating voltage in fuses, open wires, cable reels, junction boxes, sockets, switches and hidden wall cables.     Fast and reliable voltage testing – even in dark places   Due to the capacitive measuring method, it is enough to bring the voltage detector close to the conductor - the detector warns you quickly and without contact using a red flashing LED in the entire detector tip. An acoustic warning signal also sounds.   The compact pen-shaped voltage detector is equipped with a switchable LED light integrated in the measuring head, which enables you to work safely and accurately even in poor lighting conditions.   Whether attached with a clip in your shirt, jacket or trouser pocket – with the handy detector you always have a reliable testing device for quick voltage detection at hand.     Advantages at a glance   • Fast and contactless detection of alternating voltage • Voltage range 5 V – 1000 V AC / 50 Hz – 400 Hz • Protection class CAT IV 1000 V • Optical and acoustic alarm when voltage is applied • Continuous adjustment of the measuring sensitivity • Compact pen-shaped design with pocket clip • Integrated LED light for working even under unfavorable lighting conditions • Optimal price-performance ratio     scope of delivery   • Measuring device • Batteries • Operating instructions     Technical data   measuring circuit category CAT IV (1000V) measuring range V/AC 5 a 1000 V Vicinity pollution level 2 protection class IP20 voltage display LED functions       • contactless detection of alternating voltage (without galvanic contact) • acoustic alarm • optical alarm • integrated light display humidity range max. 85% RH temperature range 0 °C to 40 °C Security   EN 61610-1:2010, EN 61610-2-033:2012 EN 61326-1:2013, EN 61326-2-2:2013 battery type 2 x 1.5 V, AAA Dimensions (L x W x H) 154 x 32 x 28 mm Weight 50 g Trotec article no. 3,510,205,217 guarantee 2 years

Read more less

This two-pole tester is the ideal measuring device for electricians and ambitious DIY enthusiasts. Built and tested according to strict standards, equipped with many professional functions and, thanks to protection class IP64, also ideal for the rough everyday use.   Voltage tests, optical and acoustic continuity tests, two-pole rotating field tests and single-pole tests for phase determination are possible.   Despite its wide range of functions, the device is quick and easy to use. Its ergonomic design and low weight mean it fits comfortably in the hand and offers the user additional safety thanks to the switchable measuring point lighting for working in dark environments.     Advantages for the practice   • Single-pole test for phase determination without counter potential • Versatile two-pole voltage tester for measuring direct or alternating voltage, polarity and rotating field • Optical and acoustic continuity test • Voltage display even when batteries are empty • Automatic shutdown • Integrated flashlight for measuring point illumination • Optimal price-performance ratio • Automatic functional test • Impact-resistant, dust-proof and splash-proof housing     scope of delivery  • Measuring device • Batteries • Operating instructions    Technical data   measuring circuit category CAT III 600 V measuring range 12-690 VDC and 12-400 VAC measuring range continuity test < 300 k? DC and AC voltage automatic detection protection class IP64 voltage display LED bar display test type two-pole contact measurement functions       • optical and acoustic passage indicator • Polarity test • Phase rotation indicator • Option for single-pole phase testing • automatic shutdown • integrated flashlight for measuring point illumination   insulation protection class II, double insulation temperature range 0 °C to 50 °C Security EN 61326, EN 61010-1, EN 61010-02-031 battery type 2 x 1.5 V, IEC LR03 Dimensions (L x W x H) 240 x 78 x 40 mm Weight 237 g Trotec article no. 3,510,205,230 guarantee 2 years

Read more less

Its professional features make this robust clamp ammeter a reliable and perfect measuring device for home users as well as for electricians, tradesmen and service technicians. You can use the measuring device to quickly and easily measure alternating voltages in electrical conductors without having to switch them off, or to check direct current networks in cars, for example.  With these compact clamps, you are always on the safe side when measuring alternating voltage of up to 750 volts. You enclose the electrical conductor with the clamp and the measuring device detects whether voltage is present without contact by measuring the electromagnetic field. This 'galvanic isolation' means that you avoid any direct contact between the circuit to be measured, which also makes it possible to carry out tests on running systems.  In addition, the test device allows you to measure currents of up to 1000 A in the direct and alternating current ranges and to determine direct voltages of up to 1000 volts, both of which can be set using the manual or automatic range selection. Because this also allows you to check the direct current network in your car, for example, the pliers are the ideal measuring device for passionate car hobbyists and professionals in the automotive sector.  With one turn to the next measurement  The device has all the usual standard measuring functions such as resistance, duty cycle and frequency measurement, which you can easily select using the practical rotary switch. You can read further information on the LCD display: The bar graph indicator shows you how close you are to an electrical conductor or its electrical field. The diode tester and the continuity test also enable you to reliably check the electrical system of a vehicle, for example.  With the equipment of a real professional  All measurement results are shown on the backlit 1.8 inch LCD display. The clamp ammeter also scores points with features such as the HOLD function, polarity and overload indicators, and a MIN/MAX display. In addition, the battery-saving automatic switch-off and a low battery indicator ensure problem-free use of the device, while the LED light integrated between the two clamp jaws enables safe work even in poor lighting conditions.  Advantages at a glance • 3 5/6 digit LCD display (max. display 9999) • Robust housing • CAT III 1000 V / 750 V • Alternating current measurement up to 1000 A • DC measurement up to 1000 A • AC voltage measurement up to 750 V • DC voltage measurement up to 1000 V • Highest resolution in the milliampere range • Contactless detection of alternating voltage • Resistance measurement • Duty cycle measurement • Frequency measurement • Continuity test and diode test • Polarity indicator • Overload protection • Low battery indicator • Automatic and manual range selection • Measured value hold function • Display lighting • Bar graph indicator • Integrated white light LED for working in poor lighting conditions • Suitable for cable diameters up to 38 mm • Battery-saving automatic shutdown • Includes storage bag • Optimal price-performance ratio     functions   • Measured value hold function • automatic measuring range selection • Display of measuring range exceeded • Measurement of direct current, alternating current, direct voltage, alternating voltage, capacitance, frequency, duty cycle and resistance • Automatic shutdown • backlit display • Diode test • Continuity test • Battery status indicator • integrated LED lamp     scope of delivery   • Measuring device • Batteries • Bag/Holster • Safety measuring leads with test probes • Operating instructions     Technical data   direct current (V/DC) • Measuring range: 6-1000 V • Accuracy±(%)(6V / 60V / 600V): ±(0.8% +5) • Accuracy±(%)(1000V): ±(1.0% +5) • Accuracy±(%): 0.8 %   direct current (A/DC) • Measuring range: 6-1000 A • Accuracy±(%)(60 A): ±(0.3% +10) • Accuracy±(%)(600 A /1000 A): ±(3.0% +6) • Accuracy±(%): 3.0 %   alternating voltage (V/AC) • Measuring range: 6-750 V • Accuracy±(%)(6V): ±(0.8% +5) • Accuracy±(%)(60V / 600V / 750V): ±(1.2% +5) • Accuracy±(%): 1.2 %   alternating current (A/AC) • Measuring range: 60-1000 A • Accuracy±(%)(6V): ±(0.8% +5) • Accuracy±(%)(60V / 600V / 750V): ±(1.2% +5) • Accuracy±(%): 2.5% • Accuracy±(%): ±(2.5% +6)   Resistance (?) • Measuring range: 600-60 M • Accuracy±(%) (600 ? / 6 k? / 60 k? / 600 k?): ±(1.0% +5) • Accuracy±(%) (6 M?): ±(1.5% +5) • Accuracy±(%) (60 M?): ±(3.0% +10) • Accuracy±(%): 3%   frequency (clamp) • Measuring range min.: 40.0 Hz - 99.99 Hz • Measuring range max.: 100.0 Hz - 999.9 Hz • Accuracy±(%): ±(1.0% +5)   frequency (with test cables) • Measuring range: 9,999 Hz - 9,999 MHz • Accuracy±(%)(9.999 Hz / 99.99 Hz / 999.9 Hz / • 9.999 kHz / 99.99 kHz / 999.9 kHz): ±(1.0% +5)   duty cycle • Measuring range: 5- 95 % • Accuracy ±(%): ±(2 % +7)   capacity • Measuring range min.(nF): 40 nF • Measuring range max. (µF): 40 µF • Accuracy ±(%)(40.00 nF / 400.0 nF / 4.000 µF / 40.00 µF / 400.0 µF): ±(5.0 % +5)   • Display: LCD 3 5/6 digits • Conductor diameter max.: 38 mm • Opening pliers diameter: 50 mm • Connection sockets for 4 mm safety plugs: 2 • Measuring circuit category: CAT III (1000 V) • Protection class: IP20 • Conformity: EN 61010-1', 'Pollution degree 2 • Battery type: 3 x 1.5 V, AAA • Ambient temperature (use): 0 °C to 40°C   warranty 2 years   Trotec article number 3.510.205.244  

Read more less

Accurate light measurement at an affordable price: This compact mini lux meter enables precise light intensity measurements indoors and outdoors.   The detector meets the requirements of the ISO-recognized international lighting commissions (CIE) - the integrated spectral filter reliably filters out infrared components so that only the relevant light spectrum is recorded.   The successful combination of reliable measuring technology, ergonomic design and unbeatable price-performance ratio makes this device a universal light meter for a wide range of applications.     application examples   • Light intensity measurement at work or at home • as an aid in window display design, in trade fair construction or for optimal film and photo set lighting • Light incidence measurements for plantings in green spaces, conservatories or your own garden • As a useful planning tool for architects or for performance control of indoor and outdoor lighting systems     Advantages at a glance   • Measurement of illuminance and light incidence • Switching function lx/fc • Optimal price-performance ratio • Large, easy-to-read measurement display • Maximum value function • Simple one-handed operation • Sensor-controlled display lighting in poor lighting conditions • Automatic shutdown • Tripod thread 1/4-inch     scope of delivery   • Measuring device • Battery • Operating instructions     Technical data   measuring range 0 lx to 40,000 lx (0 fc to 3716 fc) accuracy   ±5% ±10 lx/fc (< 10000 lx / 1000 fc) ±10% ±10 lx/fc (> 10000 lx / 1000 fc) resolution 0.1 lx / 0.01 fc measurement rate 2.5 times per second, nominal display LCD, monochrome ambient temperature   Operation 0° to +40 °C Storage -10° to +60 °C ambient humidity max. 80% RH (non-condensing) Dimensions (L x W x H) 157 x 34 x 56 mm Weight 138 g Trotec article no. 3,510,205,081 guarantee 2 years

Read more less

Measure and document climate data. Long-term measurement with up to 32,000 stored values. The device stores up to 32,000 measurement data; you determine the measurement cycle and time. To ensure that the recording remains protected from manipulation, a lockable wall mount is included in the delivery, which protects the device from unwanted access. Since the recording is configured exclusively via PC, it is not possible for unauthorized persons to manipulate the configuration directly on the measuring device.   The data logger can also be evaluated and configured using the free MultiMeasure Studio software (STD). The optional professional version of the software also allows, among other things, export to Excel table format or the creation of automated reports for the corresponding evaluation.     application examples   • Proof of compulsory inspection for craftsmen • Determination of the causes of mold and moisture damage • Logging of climate data in archives and storage rooms     scope of delivery   • Measuring device • Battery • PC analysis software • lockable wall mount • Operating instructions • USB cable     Technical data   measuring range air temperature -40 °C to +70 °C (-40 °F to +158 °F) resolution air temperature 0.1 °C accuracy of air temperature max. ±1 °C measuring range relative humidity 0 % RH to 100 % RH resolution relative humidity 0.1% RH accuracy relative humidity max. 3% RH measured value memory a total of 32,000 measurements 16,000 each for temperature and humidity temperature display in °C and °F Dimensions L x W x H 94 x 50 x 32 mm Weight 91g including batteries functions • Display of maximum value + minimum value • Display of date and time • Alarm function • freely selectable measuring cycle from 1 second to 24 hours • Permanent or ring recording  Trotec article no. 3,510,205,520 guarantee 2 years

Read more less

Moisture indicator BM20 for measuring moisture in wood and soft materials   The BM20 moisture indicator from the MultiMeasure Basic series is a semi-professional measuring device for quickly determining the moisture content of building materials or wood using the resistance method.   The easily replaceable steel measuring pins enable a solid connection with the test material and ensure reliable measurement results when measuring the moisture content of sawn wood and firewood.   A bar scale and the additional direct value display of the moisture volume in absolute percentages make it easier to read the moisture values; two different scale ranges for wood and building materials increase the accuracy.   For wood moisture measurement, a calibration curve is stored in the device, which corresponds to the average of the wood types relevant in Europe based on a wood temperature of 20 °C. Therefore, no further settings are necessary for a quick indication of the wood moisture content.   Switching from wood moisture mode to building moisture mode and back is done using a convenient mode selector slider. A reference adapter is integrated into the protective cap of the device to check the battery status and function.   Technical data: Measuring principle: resistance method Electrode length: approx. 8 mm Measuring range wood moisture: 1 - 45 % Accuracy of wood moisture: approx. ± 1 % Measuring range building moisture: approx. 0.2 - 2.4% Accuracy of building moisture: approx. ± 0.05 % Permissible ambient conditions: 0 - 40 °C / 0 - 85 % rH Power supply: 3 x Cr 2032 Dimensions L x W x H (in mm): 139 x 47 x 25 Weight: 100 g warranty 2 years

Read more less

This electronic moisture indicator measures up to 4 cm deep into solid materials such as brick or concrete walls or even floors. This makes it possible to locate water that has leaked out, for example after a pipe burst. The drying progress of fresh subfloors can also be easily monitored.   Due to the dielectric measuring method, the moisture indication is absolutely non-destructive. No electrodes or probes need to be inserted into the material being measured. The response time is less than a second. At the touch of a button, additional information such as minimum and maximum values ​​are available on the easy-to-read display with backlight. The current measured value can also be saved using the hold function.     functions   • Minimum and maximum value display • Hold function • Illuminated display • Automatic shutdown     Advantages at a glance   • Fast and non-destructive indication of moisture distribution in near-surface areas • Useful pre-test device for CM measurements • Minimum value, maximum value and hold function • Automatic function and battery test • Ready to use • Optimal price-performance ratio • Illuminated display • Automatic shutdown    scope of delivery   • Measuring device • Battery • Operating instructions     Technical data   voltage 9V battery measuring range digits 100 resolution and accuracy 1 digit measuring principle dielectric / capacitive penetration depth 5 - 40 mm (non-destructive) ambient temperature 0 - +50 °C ambient humidity 0 - 80 % RH Dimensions L x W x H 180 x 35 x 45 mm Weight 180g Trotec article no. 3,510,205,031 guarantee 2 years  

Read more less

This sensor is an electronic moisture indicator that non-destructively measures the capacitive moisture in solid materials such as walls, floors or ceilings up to a depth of approx. 3-4 cm. The measuring device is ready for use immediately, can be easily connected to the app and allows you to quickly and easily locate moisture distributions close to the surface. Not only is the rapid indication of various near-surface material moisture values ​​possible, this sensor is also particularly suitable for preliminary testing of the readiness of building materials for use in CM measurements.    Advanced evaluation and function thanks to app Compared to non-app-supported moisture measuring devices, users of this device with the free "Multimeasure Mobile" app benefit from numerous additional advantages in terms of flexibility, analysis functions, data control and documentation. Compare different moisture measurements of an object that were taken at different times directly in the app. Or use the measured values ​​in combination for differentiated analyses directly on site. Useful additional features such as the alarm function, the export of moisture measurements to further analysis software and the creation of a report round off the universal application possibilities of the BM31WP and make this measuring device a valuable tool in the field of building diagnostic tasks.  With the MultiMeasure Mobile App, you can not only automatically display the MIN, MAX and average values ​​or mark individual measured values ​​directly in an image, but also create, save and send complex graphical representations in the form of a photo-linked moisture matrix. The grid to be measured can be backed up with a real image and later output as an overlaid graphic with the moisture matrix for documentation purposes – for example for your measurement report, which you can generate and send directly on site from the app.  What is an AppSensor?  Trotec appSensors are compact precision measuring devices with high-quality sensors that are designed to save energy and space and do not have any evaluation electronics or display units, as the operation and data evaluation of the devices are carried out almost entirely via the connected smartphone. In combination with the free "MultiMeasure Mobile" app, this measuring device concept offers many convincing advantages.     app "Multimeasure Mobile" "MultiMeasure Mobile" offers you a variety of advantages: • Auto-detection for appSensors • Parallel operation of several appSensors • Fast and intuitive navigation • Measured value display numerically or as diagram / matrix • Integrated report function for on-site documentation • Organizer function for measurement data and documents • Customer management already integrated • Various analysis options directly in the app • Photo-linked measurement value storage • Matrix measurements, also photo-linked • Complete data synchronization to MultiMeasure Professional via Cloud   Your mobile device becomes a multifunctional measurement data manager. All appSensors are automatically recognized and can be connected to the app and read via Bluetooth. Operation is just as simple and intuitive as installation.    Advantages at a glance • Fast and non-destructive indication of moisture distribution in near-surface areas • Useful pre-test device for CM measurements • Professional sensors for precise measurement results • Easy app connection via Bluetooth with optical connection confirmation via LED on the device • Wireless measuring device control and data display via app • Easy measurement data acquisition even at remote locations, as the values ​​do not have to be read directly on the measuring device • Additional determination and display of minimum value, maximum value or average value • Measurement data storage, logging and alarm function • Hand strap for safe handling included • Automatic shutdown   Trotec appSensors contain professional sensors for precise measurement results; they were developed for exactly this purpose. For professional measurements, use the clever combination of appSensor and MultiMeasure Mobile – the free app for iOS and Android.     scope of delivery   • Measuring device • Batteries • Hand strap • Operating instructions     Technical data   measuring range 0 - 100 digits resolution 0.1 digit measuring principle dielectric / capacitive ambient temperature 0 °C to 50 °C ambient humidity 10 - 90% RH (storage: max. 80% RH) Bluetooth 4.0 (BLE), max. 10 m transmission range in open area Dimensions (L x W x H) 160 x 36 x 22 mm Weight 93 g Trotec article no. 3,510,206,031 guarantee 2 years      

Read more less

What medicine calls a “minimally invasive procedure” can also be carried out effectively and purposefully in everyday life: the “examination” with the help of an endoscope. The small camera of the videoscope is inserted into the interior of hard-to-reach cavities and the footage can be seen live and in color on the 3-inch LCD display.   This method makes it very easy to search technical areas, cable ducts, pipes or engines for possible damage or to carry out regular maintenance checks - even when the probe is under water. The advantage is obvious: technical devices do not have to be laboriously dismantled, drywalls do not have to be pried open, water circulation systems do not have to be emptied or cable and pipe ducts do not have to be exposed. Even in the event of a pest infestation, this small camera can be used to quickly check where insects and rodents are finding shelter.     For professional and private use   Ideal for caretakers, technicians or home users - when it comes to a reliable and fast endoscopic visual inspection. Whether indirect optical inspection of hidden machine parts or for insights into cavities that are only accessible through small openings - the narrow and semi-flexible gooseneck probe with mini camera has a diameter of just 5.5 mm and is therefore ideal for in-between car inspections or an insightful look into narrow, hidden places such as gaps, drains, pipes or cable ducts.   The pre-bendable 95 cm long gooseneck probe can be inserted into small openings and the four-stage dimmable light from 6 LEDs ideally illuminates the surroundings for high-quality inspection images - even under water. The LCD color display delivers razor-sharp photos and videos with a high resolution of 1280 x 720 pixels and a 3x zoom is available for magnifying the view. The practical image rotation function by 180° simplifies the display in the event that the image is displayed upside down due to the position of the probe.     With 3 different attachments suitable for all purposes   If required, the tip of the gooseneck probe can also be equipped with a 45° mirror, hook or magnet attachment, thus expanding the range of functions. The 45° mirror attachment included in the scope of delivery enables, for example, a "look around the corner" or a closer look at the object from different perspectives. With the magnet or hook attachment, you can move objects out of the way or take them out. Thanks to the wireless operation, the device is extremely flexible and user-friendly. The display is equipped with a date and time display for precise temporal documentation. You will receive a complete set including all the necessary utensils for immediate use in a practical carrying case. Please note: To save photos and videos, you also need a micro SD card with up to 32 GB of storage space.     Compact and fully equipped all-rounder   45° mirror attachment In order to be able to carry out a thorough inspection from all sides and from different perspectives, a 45° mirror attachment is included in the complete set. This even allows you to look around corners.   hook attachment Once you have located and located the missing object or a foreign body using the probe, you can easily recover or remove it using the hook attachment. Many a piece of jewelry that was thought to be lost has been found again in this way.   magnetic attachment Without the hassle of moving furniture, screws, nuts, coins and other metal parts containing iron, nickel or cobalt can be easily found or removed from under heavy cupboards and sofas, or earrings and rings can be quickly and safely located in the drain. The recovery is easy using the practical magnet attachment on the camera.   Brightness control brings light into the darkness Of course, there are no daylight conditions in hollow spaces, cable ducts and covered areas. In order to have a perfect view here too, the camera has its own light sources that illuminate the respective environment appropriately and provide brilliant photo views. It is equipped with a camera light and an equipment light.   camera light on the probe head The camera light, which can be adjusted to 4 brightness levels, has 6 integrated LEDs and ensures perfectly illuminated inspection photos and videos.   device light There is a device light on the back of the handset that can be used to illuminate objects for a better view. Alternatively, this light source can also be used as a flashlight.   photo and video functions Brilliant image and photo playback with a maximum camera resolution of 1280 x 720 pixels. For a detailed view, you can "freeze" an image sequence during the ongoing video transmission and examine it more closely as a still image. Using the 3x zoom, image sections can be enlarged 1.0x, 1.5x and 2.0x. If a micro SD card is inserted in the device, all recordings can be saved as photos or videos. Thanks to the practical flip function, the image can be rotated 180°, so that you get a perfect view in almost any working position.     For universal applications   Find faster instead of searching for a long time With the videoscope, you can easily inspect places that would otherwise be inaccessible. This means that small parts that have accidentally fallen down, such as screws in the engine compartment or on hard-to-reach machine parts, can be found more quickly and effortlessly fished out using the easy-to-install hook or magnet attachment.   Waterproof immersion At the tip of the gooseneck probe is a color image camera head with adjustable lighting that is dust and waterproof to IP67 protection class. This means you can immerse the probe in water and quickly check whether, for example, unwanted objects are blocking the patio drain.   Check machine condition Compact machines or devices with a solid housing in particular cannot be opened easily. To be able to take a look inside the device, simply insert the 5.5 mm wide gooseneck probe into a suitable opening and use the display to get a comfortable all-round view of the inspection area.   The quick car inspection Even without dismantling the entire engine block, you want to know where the leak is, where water is dripping onto the floor, which cable the marten has ripped out, or where there is an obvious cable defect. Simply switch on the device, insert the probe, and check the situation on the display.   Finding Uninvited Roommates Insects and mice like to live in the furthest corners of the attic or basement. Other vermin such as ants also like to spread out in partition walls and are just as harmful. Now you can easily search for the pests and their nests or remains without having to do major clearing work or even removing wall, ceiling or floor coverings.     Advantages at a glance   • 3 inch digital LCD color display • 95 cm long, semi-flexible and pre-bendable gooseneck probe (Ø 5.5 mm) • Waterproof to IP67 protection class (gooseneck probe and camera head) for underwater use • Includes 3-piece accessory set with 45° mirror, hook and magnet attachment • Still image, photo and video mode • High-quality camera with a resolution of 1280 x 720 px • Taking photos and videos - can also be saved with a Micro SD card of up to 32 GB • 6-fold LED light on the camera head with 4 brightness levels • LED light in the housing (flashlight function) • Compact probe winding • Flip function for 180° image rotation • 3x zoom • Depth of field 1 cm to 30 cm, field of view 65° • Date and time display • Robust construction • Wireless battery operation for mobile, mains-independent use • Battery status indicator • Includes 4 x alkaline LR6 AA batteries, 1.5 V • Protective carrying case • Simple intuitive operation    scope of delivery   • Measuring device • Mirror adapter • Magnetic adapter • Hook adapter • Batteries • Carrying case • Operating instructions     Technical data   display Color display, 3 inch LCD (640 x 480 pixels) memory SD card 32 GB max. (optional) file formats JPG (photo) + AVI (video) Dimensions H x W x D 162 x 85 x 35 mm Weight 385g protection class IP67 power supply 4 x AA batteries (included) ambient temperature -10 °C to +60°C Trotec article no. 3,510,009,122 guarantee 2 years

Read more less

Handy floor fan made of robust metal and rotors (30 cm diameter) made of aluminum. The fan head can be swiveled vertically 100 ° so that the air flow can be tilted in any desired direction. The device has three speed settings, a practical carrying handle and a good price-performance ratio. Long service life thanks to the copper coil. Ideal for supporting water damage drying or for air circulation in any room. Due to its high reliability, the fan is also suitable for unattended continuous operation. Characteristics • Fan head with good air circulation • Three fan speeds, easily adjustable via push button on the back • Blowing direction of the fan is horizontally infinitely adjustable by 100° • Made entirely of robust metal • Rotor blades made of 100% aluminum • Powerful, durable high-performance motor with copper coil • Handy and easy to transport thanks to the carrying handle • Long power cable, approx. 1.50 m long • No assembly required, the fan is ready for use • RoHs and CE compliant • Matching wall/ceiling mount available as accessory   Technical data  power consumption max. 37 watts rotor diameter 30 cm airflow Up to 3019 m³/h noise 1 m distance: max. 58 dB(A) 2.5 m distance max. 55 dB(A) speed levels 3 Revolutions level 1 / 2 / 3: 950 / 1100 / 1250 per minute cable length approx. 1.50 m Connection EU plug with matching fixed adapter for Switzerland (230V) Dimensions (W x H x D) 395 x 375 x 185 mm Weight 2.8 kg Trotec article no. 1,510,006,011 guarantee 2 years

Read more less

High-quality floor fan made of robust metal and the rotors (45 cm diameter) made of aluminum. The fan head can be swiveled vertically so that the air flow can be tilted in any desired direction. The device has three speed settings, a practical carrying handle and a good price-performance ratio. Ideal for supporting water damage drying or for air circulation in any room. Due to its high reliability, the fan is also suitable for unattended continuous operation. Characteristics • Large fan head with good air circulation • Three fan speeds, easily adjustable via push button on the back • Blowing direction of the fan is horizontally infinitely adjustable by 110° • Made entirely of robust metal • Rotor blades made of 100% aluminum • Powerful, durable high-performance motor with copper coil • Handy and easy to transport thanks to the carrying handle • Long power cable, approx. 1.50 m long • No assembly required, the fan is ready for use • RoHs and CE compliant • Matching wall/ceiling mount available as accessory   Technical data  power consumption max. 100 watts rotor diameter 45 cm airflow Up to 5414 m³/h air speed max. 3.8 m/s noise (our measurement)     1 m distance level 1-3: 61-65 dB(A) 2.5 m distance level 1-3: 57-61 dB(A) speed levels 3 Revolutions level 1 / 2 / 3: 900 / 1150 / 1300 per minute cable length approx. 1.50 m Connection EU plug with matching fixed adapter for Switzerland (230V) Dimensions (W x H x D) 540 x 535 x 180 mm Weight 4.5 kg Trotec article no. 1,510,006,031 guarantee 2 years

Read more less