Reliable dehumidifier with solid drying performance
This device has been manufactured for many years and has been continuously developed. The current version has an attractive design and has been brought up to date with the latest technology.
Comfortable operation
The unit is operated via a clearly laid out control panel with a display on top, where the desired target humidity can be entered in 5% increments. Continuous operation is also possible. The integrated hygrostat then implements this target fully automatically and automatically regulates the performance of the compressor and two-stage fan.
The display panel shows you, among other things, the current value of the relative humidity in the room, the current room temperature and the entered target value. The dryer also has a timer function, an automatic error diagnosis system and a memory function. This memory function ensures that the set humidity value and the operating mode are saved even after switching off or in the event of a power failure. This makes this model also suitable for operation with a timer, for example if you only want to run it during off-peak hours.
The water that is extracted from the air is collected in the bucket at the front. A float automatically stops operation when the bucket is full. Alternatively, the water can be drained directly into a lower drain via a connectable hose. The hose must be laid in a downward direction as there is no pump in the device.
Also suitable for drying laundry
The combination of good dehumidification power and an appealing air flow makes this dehumidifier also a tumble dryer, which can dry 2-3 washing machine loads per day in a temperate environment. Dehumidifiers offer the advantage that laundry is dried gently, just like in nature. Colors stay bright and clothes last longer than with conventional tumble dryers, while using significantly less electricity. In addition, sensitive materials such as wool, silk or synthetic fibers can be dried without any problems.
Permanent air circulation
In this model, the compressor (= dehumidification) stops when the desired humidity is reached, while the fan runs continuously to circulate the room air.
Environmentally friendly refrigerant
Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection.
The natural refrigerant propane (R290) is an organic compound and is classified as a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).
Additional benefit for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.
Advantages at a glance
• Hygrostat-controlled automatic dehumidification with target value pre-selection between 30 and 80 % RH in 5 % steps
As soon as the desired humidity level is reached, the compressor pauses until the humidity in the room increases again (the fan continues to run to determine the true room humidity).
• Continuous operation possible
• Display of the desired humidity, the current humidity and the current room temperature
• Memory function
• Automatic fault diagnosis system
• Laundry drying function
• Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust and prevents bacterial growth.
• Timer function
• Direct hose connection
• 2 fan speeds
• Level warning light when water tank is full
• Overfill protection with automatic shutdown
• Hot gas defrosting: faster automatic self-defrosting in cooler environments.
Technical data
dehumidification performance
at 30 °C / 80 % RH
|
25 liters / day
|
| air volume
|
215 m³/h
|
| Maximum room size
|
60 m² (150 m³)
|
| Minimum room size |
4 m² (15 m³)
|
| temperature range
|
5 - 32°C
|
|
Selectable target humidity
Achievable target humidity
|
30 - 80 % RH
35 - 80 % (fin evaporator)
|
| voltage
|
220 - 240 V/50 Hz
|
| nominal current consumption
|
max. 2.4 A
|
| power consumption
|
max. 570W
|
| Recommended coverage
|
10 A
|
| cable length
|
approx. 1.6 m |
| Plug
|
EU plug with Swiss adapter
|
| refrigerant
|
R290 (122g) GWP3
|
| water bucket
|
4.3 liters
|
| operating noise
|
50 dB(A) at 1 m distance
47 dB(A) at 2.5 m distance
|
| Dimensions L x W x H
|
274 x 390 x 612 mm
|
| Weight
|
15.5 kg
|
| defrosting automatic
|
hot gas
|
| automatic dehumidification
|
hygrostat-controlled |
| fan
|
radial, 2-stage fan
|
| automatic shutdown when bucket is full
|
Yes
|
| prefilter
|
Yes
|
| timer
|
Yes
|
| continuous operation possible
|
Yes
|
| laundry drying mode
|
Yes
|
| display
|
shows current room humidity, set humidity
|
| memory function
|
yes (saves set values automatically)
|
| hose connection |
yes, suitable hose 12mm inner diameter
|
| Similar models
|
Krüger Airsec 3000
|
| guarantee
|
2 years |
