From the "Top Ten" list of the most economical room air dryers: The Dryfix "Swiss" is an excellent dryer for single-family homes with drying rooms of up to 15m² and approx. 40m clotheslines. It is economical and quieter than room air dryers with comparable drying performance. The elegant, relatively slim metal housing fits perfectly into the room. To install, the support rail is fixed to the wall with two screws, and the dryer can then simply be hung on it. Rubber buffers prevent the (very slight) vibration from being transferred to the wall. The condensate is led via a hose either directly into a drain or into a bucket underneath the device. The air intake is on the side (right), and the coarse dust filter can be easily pulled out to the front for cleaning.
Drying programs:
The controls are located on the side of the housing. A toggle switch is used to select whether you want the "laundry drying" or "room monitoring" mode. The desired residual moisture can be easily regulated using a rotary switch.
Drying clothes: The drying program can be started at the touch of a button. The dehumidifier runs until the laundry is dry and then switches off automatically.
Room monitoring: General room monitoring is used to prevent mold and odors in the basement. The device switches on automatically whenever the room humidity rises above the value set on the dial; the ideal value for this mode is around 55-60%. Unlike the laundry drying programs, the dryer never switches off completely in this mode, but only pauses as long as the humidity is right. If the humidity rises again, the drying mode switches back on.
You can only get Dryfix Swiss from us! It is manufactured exclusively for our company in a specialized factory in Switzerland.
ambient temperature
Technically, the "Swiss" dryers can be used down to 5°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. 15°C and higher are optimal for optimum drying speed. The declared drying performance was measured at a room temperature of 20°C.
mounting on the wall
As with all tumble dryers, installation is extremely simple: a mounting rail is anchored into the wall with 2 screws, and the device can then be hung up. All necessary installation material such as screws/anchors and 1m of hose is included in the scope of delivery. Both the support rail and the two buffers in the lower part of the device that support the wall are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the sink using the hose if possible. If you want to use a bucket, please ensure that it has enough capacity (at least 8 liters) to avoid overflowing while drying laundry. If mounting on the wall is not possible, you will find suitable chassis in our range to which the dryer can be mounted.
If you wish, we can professionally install the dryer at your home. Price on request.
Important:
- Sanitary (drain) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, if one does not already exist.
- If your wall has internal insulation, we need to know this when ordering, as installation is more complex. The installation prices quoted refer to direct wall installation, i.e. directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls are charged according to the effort involved.
