This very reliable and powerful pump with check valve can be used free-standing or built directly into the device. The pump can also be wall-mounted, as there are two brackets on the back with which the pump can be attached to the wall using two screws.
The pump is suitable for condensate water, but not for dirty water. The water can be fed into the pump via a maximum of 3 inlets and is pumped away via a thin 3/8 inch (10 mm) connection using a hose up to a maximum height of 4 meters (the hose is not included in delivery). The pump has a cable with a three-pin Swiss plug (230V).
The pump's check valve prevents water from flowing back from the outgoing hose. The condensate pump has a float that only starts the device when water has accumulated. It can therefore also be used when water is not constantly flowing in. It is also possible to connect the pump to the electrical circuit of a dehumidifier (construction dryer) so that the dehumidifier would switch off if the pump were to break down (this work must be carried out by an electrician).
Examples of conveying capacity
At 0 m height: 360 liters per hour
At a height of 2 m: 240 liters per hour
At 4 m height: 192 liters per hour
Characteristics
• Check valve
• Three (3) inlet openings
• Easy installation
• Overheating protection
• Very quiet operating mode
• Shock-resistant tank
• Compact design
