This construction dryer is very popular in professional use because it has a strong dehumidification capacity of up to 30 liters per day and at the same time, at less than 20 kg, is one of the lightest dehumidifiers in this category. This means that it can be easily transported by one person up stairs and even over scaffolding to the drying location.
It is also compact in size, which saves space in the service vehicle. This is very much appreciated by water damage repairers who have to bring a lot of equipment to the damage site in the shortest possible time.
This model is also impressive when it comes to storage, as it is stackable and therefore takes up less space in the warehouse.
Operation
The desired target moisture can be selected in 1% increments using the digital control panel on top of the device. Continuous operation is also possible. The set values are saved by pressing the memory button. In the event of a power failure, operation will automatically continue with the same settings as soon as the power is restored. An operating hour counter on the side provides information on the drying time.
The moist room air is sucked in at the back and cleaned of dust and dirt by an easy-to-clean filter. The dried air is then blown out at the front. The automatic hot gas defrosting ensures that dehumidification takes place with maximum efficiency even in cooler environments.
The water extracted from the air can either be collected in the inserted bucket or drained directly via a hose (suitable inner diameter: 10 mm). A float automatically stops operation when the bucket is full. If the water is drained via the hose, it first runs through the bucket to which the hose connector is attached. This system is very safe: if the hose is blocked, kinked or not laid correctly, the water backs up into the bucket. When the bucket is full, operation stops. This means that overflowing onto the floor is not possible, unlike dryers where the hose is attached directly to the drip tray.
Important functions
• Digital control and side-mounted operating hour counter
• High efficiency thanks to automatic hot gas defrosting
• Robust housing with foldable carrying handle and four small wheels
• Easy to use
• Built-in hygrostat
• Water tank with automatic shutdown when tank is full
• Possibility to connect a hose for direct drainage of condensate
• Air filter
• Stackable
Suitable for
• Keeping private cellars and rooms dry
• Keeping commercial premises and archives dry
• Construction
• Industry and Production
• Rental
• Construction and water damage drying
• Waterworks
Propane (R290) as an environmentally friendly refrigerant in dehumidifiers
Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection.
The natural refrigerant propane (R290) is an organic compound and is classified as a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).
Additional benefit for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.
Technical data
dehumidification performance
at 20 °C / 60 % RH
at 30 °C / 80 % RH
|
10.8 liters / day
30 liters / day
|
| air volume
|
max. 200 m³/ h
|
| Maximum room size
|
75 m² (180 m³) |
| temperature range
|
5 - 35 °C
|
humidity range technically
humidity range practice
|
35 - 90 % RH
40 - 90% RH (finned evaporator)
|
| voltage
|
220 - 240 V/50 Hz
|
| nominal current consumption
|
max. 3 A
|
| power consumption
|
max. 680 W
|
| Recommended coverage
|
10 A
|
| Plug
|
connection cable with EU plug and Swiss fixed adapter |
| refrigerant
|
R290 (GWP: 3)
|
| bucket + hose connection
|
6.5 liter bucket and direct hose connection (suitable hose 10mm inner diameter)
|
| operating noise
|
45 dB(A) at 1 m distance
42 dB(A) at a distance of 3 m
|
| dimensions (W x H x D)
|
338 x 550 x 358 mm
|
| Weight
|
19.5 kg
|
| automatic defrosting
|
hot gas
|
| Attitude
|
Digital control panel |
| fan
|
axial, 1-stage fan
|
| compressor
|
rolling piston
|
| prefilter
|
Yes
|
| operating hour meter
|
Yes
|
| continuous operation possible
|
Yes
|
| display
|
Yes
|
| memory function
|
yes (set values saved at the touch of a button)
|
| guarantee
|
2 years |
