Krüger Secomat 200 room air dryer

Description

One of the strong Krüger Secomats. It is suitable for single-family homes with smaller drying requirements for rooms that are not heated. It has various functions that combine the previous separation into AH (endless operation) and E (end-off) models in one device:

drying programs

drying clothes

It is operated at the touch of a button. You can choose between light, medium or high drying levels. The tumble dryer works fully automatically and, similar to the previous models, with what is known as an end-off control, which means that it dehumidifies until the laundry is dry and then switches off automatically. If you want to use the device again, you have to restart it manually.

basement dehumidification
The dryer is also equipped with a button for keeping the room dry. The device runs whenever the humidity is too high and there is a risk of mold/odors forming in the basement. If the humidity is right, the device stops.


timer function

It is also possible to operate the device manually for 30, 60 or 90 minutes. After the time has elapsed, the device switches off and manual operation is automatically switched off.


execution

Compact device with powerful ventilation. Slats for air outlet, which can be adjusted horizontally if required. The clearly laid out control panel is limited to 4 buttons on the front. The support rail and the two spacer buffers in the lower part of the device are insulated with rubber to reduce the transmission of sound to the wall. The mouse-gray color of the housing is individually pleasing.

Heating option : This model is also available with a 1350W heater for an additional charge. This switches on automatically at 14°C (or colder) and heats until the room temperature reaches 16°C. This heater is therefore only useful in very cold drying rooms. If the room is 16°C or warmer all year round, the version with heater offers no advantage.

Technically, the devices can be used down to 10°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimum drying speed, 15°C and higher are optimal. The declared drying performance was measured at a room temperature of 20°C.


scope of delivery

The delivery includes the device with support rail, all necessary mounting material and a drain set. The drain set consists of a water tank, drain hose and suitable hose connection couplings.


assembly

If you wish, we can professionally install the dryer at your home for CHF 210.-.

Important:
- Sanitary (drain) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, if one does not already exist.

- If your wall has internal insulation, we need to know this when ordering, as installation is more complex. The installation prices quoted refer to direct wall installation, i.e. directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls are charged according to the effort involved.

If wall mounting is not possible, we recommend the appropriate chassis.
 
 
Technical data
 
Krüger article: 389.01
drying room: up to 25 m²
Drying performance: 3.08 Kg/h
Consumption per kg of laundry: 0.27 kWh
Energy efficiency: A1
Tension: 230V / 50Hz
Power consumption: max. 989W or 950W (at 20°C/60% RH)
Version with heating Secoamt 200H: Heating switched on = +1350W
Sound pressure level: 69 dB(A) (manufacturer's specification with 20kg of laundry in the room)
Examples of
dehumidification performance
and consumption:
at 20°C / 60% RH = 28.0 liters / 24h (power consumption: 950 W)
air circulation volume: 1400 m³/h
condensate tank: No integrated tank. The water is supplied via a hose connection
directly into the drain or into a bucket.
Compressor: rotary compressor
refrigerant: R407c / 550g
Dimensions (H/W/D): 690 x 655 x 395 mm
Weight: 47 kg
Operating setting: program keys
Ambient temperature: 10°C ~ 30°C
Swiss plug: Yes
hose connection: Yes
Guarantee: 3 years
Product form

One of the strong Krüger Secomats. It is suitable for single-family homes with smaller drying requirements for rooms that are... Read more

SKU: A001342

CHF 3,670.00 Incl. VAT

    Description

    One of the strong Krüger Secomats. It is suitable for single-family homes with smaller drying requirements for rooms that are not heated. It has various functions that combine the previous separation into AH (endless operation) and E (end-off) models in one device:

    drying programs

    drying clothes

    It is operated at the touch of a button. You can choose between light, medium or high drying levels. The tumble dryer works fully automatically and, similar to the previous models, with what is known as an end-off control, which means that it dehumidifies until the laundry is dry and then switches off automatically. If you want to use the device again, you have to restart it manually.

    basement dehumidification
    The dryer is also equipped with a button for keeping the room dry. The device runs whenever the humidity is too high and there is a risk of mold/odors forming in the basement. If the humidity is right, the device stops.


    timer function

    It is also possible to operate the device manually for 30, 60 or 90 minutes. After the time has elapsed, the device switches off and manual operation is automatically switched off.


    execution

    Compact device with powerful ventilation. Slats for air outlet, which can be adjusted horizontally if required. The clearly laid out control panel is limited to 4 buttons on the front. The support rail and the two spacer buffers in the lower part of the device are insulated with rubber to reduce the transmission of sound to the wall. The mouse-gray color of the housing is individually pleasing.

    Heating option : This model is also available with a 1350W heater for an additional charge. This switches on automatically at 14°C (or colder) and heats until the room temperature reaches 16°C. This heater is therefore only useful in very cold drying rooms. If the room is 16°C or warmer all year round, the version with heater offers no advantage.

    Technically, the devices can be used down to 10°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimum drying speed, 15°C and higher are optimal. The declared drying performance was measured at a room temperature of 20°C.


    scope of delivery

    The delivery includes the device with support rail, all necessary mounting material and a drain set. The drain set consists of a water tank, drain hose and suitable hose connection couplings.


    assembly

    If you wish, we can professionally install the dryer at your home for CHF 210.-.

    Important:
    - Sanitary (drain) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, if one does not already exist.

    - If your wall has internal insulation, we need to know this when ordering, as installation is more complex. The installation prices quoted refer to direct wall installation, i.e. directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls are charged according to the effort involved.

    If wall mounting is not possible, we recommend the appropriate chassis.
     
     
    Technical data
     
    Krüger article: 389.01
    drying room: up to 25 m²
    Drying performance: 3.08 Kg/h
    Consumption per kg of laundry: 0.27 kWh
    Energy efficiency: A1
    Tension: 230V / 50Hz
    Power consumption: max. 989W or 950W (at 20°C/60% RH)
    Version with heating Secoamt 200H: Heating switched on = +1350W
    Sound pressure level: 69 dB(A) (manufacturer's specification with 20kg of laundry in the room)
    Examples of
    dehumidification performance
    and consumption:
    at 20°C / 60% RH = 28.0 liters / 24h (power consumption: 950 W)
    air circulation volume: 1400 m³/h
    condensate tank: No integrated tank. The water is supplied via a hose connection
    directly into the drain or into a bucket.
    Compressor: rotary compressor
    refrigerant: R407c / 550g
    Dimensions (H/W/D): 690 x 655 x 395 mm
    Weight: 47 kg
    Operating setting: program keys
    Ambient temperature: 10°C ~ 30°C
    Swiss plug: Yes
    hose connection: Yes
    Guarantee: 3 years

    © 2024 ambiento.ch by eShoppen GmbH

      • American Express
      • Apple Pay
      • Google Pay
      • Maestro
      • Mastercard
      • PayPal
      • Visa

      Login

      Forgot your password?

      Don't have an account yet?
      Create account