This model is suitable for single-family homes with large amounts of laundry and in drying rooms that can get cooler in winter. It has various functions that combine the previous separation into AH (endless operation) and E (end-off) models in one device:
drying programs
drying clothes
It is operated at the touch of a button. You can choose between light, medium or high drying levels. The tumble dryer works fully automatically and, similar to the previous models, with what is known as an end-off control, which means that it dehumidifies until the laundry is dry and then switches off automatically. If you want to use the device again, you have to restart it manually.
basement dehumidification
The dryer is also equipped with a button for keeping the room dry. The device runs whenever the humidity is too high and there is a risk of mold/odors forming in the basement. If the humidity is right, the device stops.
timer function
It is also possible to operate the device manually for 30, 60 or 90 minutes. After the time has elapsed, the device switches off and manual operation is automatically switched off.
execution
Compact device with powerful ventilation. Slats for air outlet, which can be adjusted horizontally if required. The clearly laid out control panel is limited to 4 buttons on the front. The support rail and the two spacer buffers in the lower part of the device are insulated with rubber to reduce the transmission of sound to the wall. The mouse-gray color of the housing is individually pleasing.
Heating : This model is equipped with a 1350W heater. This switches on automatically at 14°C (or colder) and heats until the room temperature is 16°C. This heater is therefore only useful in very cold drying rooms. If the room is 16°C or warmer all year round, the version with heating is of no advantage. In this case, consider the standard version without heating.
Technically, the devices can be used down to 10°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimum drying speed, 15°C and higher are optimal. The declared drying performance was measured at a room temperature of 20°C.
scope of delivery
The delivery includes the device with support rail, all necessary mounting material and a drain set. The drain set consists of a water tank, drain hose and suitable hose connection couplings.
assembly
If you wish, we can professionally install the dryer at your home for CHF 210.-.
Important:
- Sanitary (drain) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, if one does not already exist.
- If your wall has internal insulation, we need to know this when ordering, as installation is more complex. The installation prices quoted refer to direct wall installation, i.e. directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls are charged according to the effort involved.
If wall mounting is not possible, we recommend the appropriate chassis.
Technical data
Krüger article:
|
387.04
|
drying room:
|
up to 25 m²
|
Drying performance: |
2.98 Kg/h
|
Consumption per kg of laundry:
|
0.30 kWh
|
Energy efficiency:
|
A1
|
Tension:
|
230V / 50Hz
|
Power consumption:
|
max. 989W or 950W (at 20°C/60% RH) Version with heating Secomat 100H: Heating switched on = +1350W
|
Sound pressure level:
|
71 dB(A) (manufacturer's specification for 10kg of laundry in the room) |
Example of dehumidification performance and consumption:
|
at 20°C / 60% RH = 28.0 liters / 24h (power consumption: 950 W)
|
air circulation volume:
|
1200 m³/h
|
condensate tank:
|
No integrated tank. The water is supplied via a hose connection directly into the drain or into a bucket.
|
Compressor:
|
rotary compressor
|
refrigerant:
|
R407c / 550g
|
Dimensions (H/W/D): |
690 x 655 x 395 mm
|
Weight:
|
47 kg
|
Operating setting:
|
program keys
|
Ambient temperature:
|
10°C ~ 30°C
|
Swiss plug:
|
Yes
|
hose connection:
|
Yes
|
Guarantee:
|
3 years |