Fral FDK100 large room dehumidifier

Description

The top dryer for larger rooms. The FDK reliably does the heavy work in both cooler and temperate rooms.

It is extremely easy to operate: a rotary dial to regulate the desired target humidity and you're done. The device does everything else automatically. The FDK can use its dehumidifying power to keep garages, industrial halls or water management systems dry all year round, for example. You can only get this model from us; comparable products on the market cost twice as much.

Thanks to the well-developed hot gas defrosting system, the dryer can be used down to almost freezing point. Also very noticeable is its good performance in low humidity areas, where it still extracts water from the air, where other dryers have long since stopped producing a drop. When the desired target humidity is reached, the device switches off completely and starts again automatically when the room humidity increases.

The moist air is sucked in on one side of the housing and cleaned by an industrial, reusable filter. The dry air is blown into the room on the opposite side and creates effective circulation in the room. Many locations are conceivable in terms of placement in the room. Close to the floor, somewhere on a free shelf, or mounted on the wall with brackets. When wall-mounted, the dryer can also be installed right up high, directly under the ceiling.

The condensate is drained directly via the hose connection. The FDK100 stands on 4 (removable) rubber feet and has two foldable handles on the top of the housing for easier mobility. When installed close to the floor, the hose must have a constant slope towards the drain so that it can drain cleanly and does not back up into the drip tray.

The construction is solid and high quality. The housing is made of white powder-coated metal, the interior consists of components from the professional league. The device is therefore easily suitable for unattended continuous operation. Even in the event of a power failure, it resumes dehumidification work with the same settings and is therefore also suitable for operation with a timer or a smart home system.


The FDK is suitable

• as a dehumidifier for warehouses, commercial and industrial premises, garages and cellars
• for wall mounting or directly on the ceiling
• for continuous dehumidification of temperate but also cold rooms from 1°C
• for unattended continuous operation
• for operation with a timer

dehumidification performance

Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +1°C and +35°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions:


30°C/80% RH: 80 liters / 24 h
20°C/80% RH: 45 liters / 24 h
20°C/60% RH: 30 liters / 24 h
10°C/60% RH: 18 liters / 24 h
(RH=relative humidity)


Optional accessories

The delivery includes the plug-in device including 4 feet for installation on a shelf, for example. If required, we have various suitable accessories for this dryer, such as:

• 2 wall brackets for mounting on a wall (together Fr. 68.-)
• Hose coupling
• Hose
• Condensate pump (if the condensate is to be transported upwards)


Smaller version

The device is also available in the smaller version "FDK44" -> Details
Comparable devices: Lunor L75
Technical data
Tension 230V / 50Hz
power consumption 1020W (at 20°C/60% RH), max. 1550W
sound pressure level 1 m distance 58 dB(A) (our measurement) 2.5 m distance 56 dB(A) (our measurement)
dehumidification performance 80 liters/day (30°C / 80% RH)
amount of recirculated air 1100 m³/h (installed, free blowing approx. 1350 m³/h)
condensate tank No tank / only hose connection possible
compressor rotary compressor
refrigerant R410A
Dimensions (L x H x D) 73 x 58 x 58 cm
Weight 48 kg
cessation of operations hygrostat wheel
ambient temperature 1°C ~ 35°C
application area up to 250m²/1000m³
Swiss plug Yes
hose connection Yes
guarantee 2 years

Product form

The top dryer for larger rooms. The FDK reliably does the heavy work in both cooler and temperate rooms. It... Read more

SKU: A001215

CHF 1,490.00 Incl. VAT

    Description

    The top dryer for larger rooms. The FDK reliably does the heavy work in both cooler and temperate rooms.

    It is extremely easy to operate: a rotary dial to regulate the desired target humidity and you're done. The device does everything else automatically. The FDK can use its dehumidifying power to keep garages, industrial halls or water management systems dry all year round, for example. You can only get this model from us; comparable products on the market cost twice as much.

    Thanks to the well-developed hot gas defrosting system, the dryer can be used down to almost freezing point. Also very noticeable is its good performance in low humidity areas, where it still extracts water from the air, where other dryers have long since stopped producing a drop. When the desired target humidity is reached, the device switches off completely and starts again automatically when the room humidity increases.

    The moist air is sucked in on one side of the housing and cleaned by an industrial, reusable filter. The dry air is blown into the room on the opposite side and creates effective circulation in the room. Many locations are conceivable in terms of placement in the room. Close to the floor, somewhere on a free shelf, or mounted on the wall with brackets. When wall-mounted, the dryer can also be installed right up high, directly under the ceiling.

    The condensate is drained directly via the hose connection. The FDK100 stands on 4 (removable) rubber feet and has two foldable handles on the top of the housing for easier mobility. When installed close to the floor, the hose must have a constant slope towards the drain so that it can drain cleanly and does not back up into the drip tray.

    The construction is solid and high quality. The housing is made of white powder-coated metal, the interior consists of components from the professional league. The device is therefore easily suitable for unattended continuous operation. Even in the event of a power failure, it resumes dehumidification work with the same settings and is therefore also suitable for operation with a timer or a smart home system.


    The FDK is suitable

    • as a dehumidifier for warehouses, commercial and industrial premises, garages and cellars
    • for wall mounting or directly on the ceiling
    • for continuous dehumidification of temperate but also cold rooms from 1°C
    • for unattended continuous operation
    • for operation with a timer

    dehumidification performance

    Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +1°C and +35°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions:


    30°C/80% RH: 80 liters / 24 h
    20°C/80% RH: 45 liters / 24 h
    20°C/60% RH: 30 liters / 24 h
    10°C/60% RH: 18 liters / 24 h
    (RH=relative humidity)


    Optional accessories

    The delivery includes the plug-in device including 4 feet for installation on a shelf, for example. If required, we have various suitable accessories for this dryer, such as:

    • 2 wall brackets for mounting on a wall (together Fr. 68.-)
    • Hose coupling
    • Hose
    • Condensate pump (if the condensate is to be transported upwards)


    Smaller version

    The device is also available in the smaller version "FDK44" -> Details
    Comparable devices: Lunor L75
    Technical data
    Tension 230V / 50Hz
    power consumption 1020W (at 20°C/60% RH), max. 1550W
    sound pressure level 1 m distance 58 dB(A) (our measurement) 2.5 m distance 56 dB(A) (our measurement)
    dehumidification performance 80 liters/day (30°C / 80% RH)
    amount of recirculated air 1100 m³/h (installed, free blowing approx. 1350 m³/h)
    condensate tank No tank / only hose connection possible
    compressor rotary compressor
    refrigerant R410A
    Dimensions (L x H x D) 73 x 58 x 58 cm
    Weight 48 kg
    cessation of operations hygrostat wheel
    ambient temperature 1°C ~ 35°C
    application area up to 250m²/1000m³
    Swiss plug Yes
    hose connection Yes
    guarantee 2 years

    © 2024 ambiento.ch by eShoppen GmbH

      • American Express
      • Apple Pay
      • Google Pay
      • Maestro
      • Mastercard
      • PayPal
      • Visa

      Login

      Forgot your password?

      Don't have an account yet?
      Create account