The water separator "VT2" is an element of the Aerial-Aercube series. It can be integrated into the Aercube drying system in combination with the sound boxes VP2 - 6, for example to extract standing water from under subfloors. Suitable for both clean and dirty water.
The suction pressure is thus generated by the sound boxes. Inside the "VT2" there is a level controller and a Grundfos pump, which automatically pumps out the water that has been sucked in at intervals as soon as a certain level is reached. The waste water container holds 20 liters. Thanks to the closed housing construction, the "VT2" can even be used in standing water up to a maximum depth of 30 cm. Two safety locks prevent water from getting into the device.
After use, the remaining water can be completely drained using a drain screw. Cleaning the device is very easy.
The "VT2" is controlled by EDry electronics. The following elements are located on the control panel:
• On/off switch.
• "Info" button: to query the total amount of water pumped since the last switch-on (tamper-proof).
• Fuse device socket 16A.
• Device socket (to control the sound box).
• Button for pumping out the remaining water.
• LED display for querying flow rates, time of last pumping, etc.
Features and Benefits
• Powerful dirty water pump for industrial applications.
• Discharge head of waste water up to max. 7 m.
• Full text display shows all important operating states.
• Drain plug for easy drainage of residual water.
• Easy-to-open safety quick-release fasteners.
• Various grip and carrying options.
• Robust AERCUBE housing.
• Display of the amount of water pumped out (total and per construction site as well as the time of the last pumping process).
• Electronic level control.
• Manual pumping at the touch of a button.
• suitable for continuous operation.
All AERCUBE system components are 100% compatible with each other and stackable.
Aerial "eDRY®" for efficient air dehumidification
The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use.
Technical data
| Tension:
|
230 V / 50 Hz
|
| Recording:
|
380W
|
| Weight:
|
18 kg |
| Dimensions H x W x D:
|
507 / 390 / 490 mm
|
| Operating temperature:
|
+3°C to +38°C
|
feed pump:
|
Grundfos CC7
lifting height max. 7m
flow rate 9 m³/h
|
| container volume:
|
20 liters
|
| Protection class:
|
IP44
|
| Guarantee:
|
2 years (5 years housing)
|
