The AD40 is versatile and so light that it can be carried like a suitcase. Thanks to BlueDry® technology, the AD40 dehumidifies consistently and reliably even at low humidity and temperatures.
service
It is easy to operate using the innovative eDRY® electronics. All controls are clearly arranged and all important operating states can be called up at any time. The target and actual humidity are shown on the display. Operating hours (consumption) can be easily read. Energy consumption is shown using the additional, calibrated energy meter. The control system is equipped with a memory function. This means that in the event of a power failure, e.g. on construction sites, operation will resume with the same settings as soon as the power is restored.
water bucket or optional pump
The water collection container (6.8 liters) is easy to remove, carry and empty. It is located inside, and the fill level of the water bucket is measured by a float. When it is full, this automatically stops operation, and operation also starts again automatically when the bucket is put back in. A suitable pump kit is optionally available, which can be used flexibly and is also suitable for unattended continuous operation.
Robust housing
The housing is easy to clean and easy to dismantle for any service work that may be required. It has a fold-up handle. Lashing straps can be attached to each side. The protected socket is used to connect additional devices. Four robust, stable plastic feet for floor installation. Can be stacked with other Aerial Aercube devices.
Characteristics
• Housing: made of robust, impact-resistant and UV-resistant plastic, lightweight. Fixing points for AERCUBE® lashing system.
• Cable: integrated cable winding.
• Installation: freestanding or mounted on Aercube system (fixing points for AERCUBE lashing system).
• Air flow: transverse, side intake and outlet.
• Air filter: Protects the device from dust.
• Fan: 2-speed, energy efficient EC fan.
• Defrost: Demand-controlled hot gas defrosting.
• Condensate pump: Optional pump kit available.
• Blue-Dry technology: For particularly energy-saving operation – even at low humidity and temperatures.
• Calibrated energy meter (MID compliant).
• Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example.
• Hot gas defrosting: Can also be used in cooler environments thanks to automatic self-defrosting.
• Suitable for unattended continuous operation.
• Own design: available in all colours and with your logo for larger quantities.
All AERCUBE system components are 100% compatible with each other and stackable.
Aerial "eDRY®" for efficient air dehumidification
The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity.
dehumidification performance
Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +1°C and +34°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions:
30°C / 80% rF = 35.0 liters / 24h (power consumption: 520W)
27°C / 60% rF = 22.0 liters / 24h (power consumption: 430W)
20°C / 60% rF = 15.0 liters / 24h (power consumption: 370W)
10°C / 70% rF = 8.0 liters / 24h (power consumption: 300W)
(RH=relative humidity)
