A powerful dehumidifier for construction sites and industry. The powerful fan ensures a wide-area exchange of moist and dry air. It has a housing made of impact-resistant plastic, two large wheels and a fold-up handle for easy movement around the floor and even over stairs.
The moist air is drawn in at the back via an easily removable air filter. The dry air is blown out at the front through slanted slats.
Characteristics
• Fan: Axial fan with aluminum impeller. Motor with winding protection.
• Compressor: Fully hermetic rotary piston compressor, protected against overload, vibration-damped mounting.
• Condenser/evaporator: made of copper tubes with attached aluminum fins
• Self-defrosting: automatic hot gas defrosting controlled by DryLogic, therefore usable down to freezing point
• Collection container: 6.8 liters with automatic full level shut-off
• Hose connection: nozzle (15 mm) for direct condensate drainage. Pump available as an option.
• Hygrostat: digital with hygrostat rotary knob
• Operating hour counter
• Consumption meter kWh: calibrated, can be read without power
• 2 large transport wheels: for easy mobility on construction and damage sites
• Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example.
• Suitable for unattended continuous operation.
Aerial "eDRY®" for efficient air dehumidification
The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity.
dehumidification performance
Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +1°C and +34°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions:
at 30°C / 80% RH = 37.0 liters / day (power consumption: 520 W) at 27°C / 60 %RH = 23.0 liters / day (power consumption: 430 W) at 20°C / 60% RH = 16.5 liters / day (power consumption: 390 W) at 10°C / 70% RH = 8.0 liters / day (power consumption: 320 W)
Technical data
| Tension:
|
230V / 50Hz
|
| Power consumption:
|
max. 520 W (10A) / 390W (at 20°C/60% RH)
|
| Sound pressure level:
|
2.5 m distance 51 dB(A) (manufacturer information)
|
| Dehumidification performance:
|
max. 37 liters/day (30°C / 80% RH)
|
| Recirculation air volume level 1/2:
|
450 / 550 m³/h
|
| condensate tank:
|
approx. 6.8 liters
|
| Compressor:
|
rotary compressor
|
| refrigerant: |
R407c (550gr.)
|
| Dimensions (H / W / D):
|
690 x 390 x 470 mm
|
| Weight:
|
32 kg
|
| Operating setting:
|
Digital control panel
|
| Ambient temperature:
|
1°C ~ 34°C (35 - 99% RH)
|
| Application area:
|
up to 100m² / 300m³
|
| Swiss plug:
|
Yes
|
| hose connection:
|
Yes
|
| Operating hour meter:
|
Yes |
| Guarantee:
|
2 years |
