The AB-10 is a powerful, versatile fan made of robust plastic. The radial flywheel pushes the air drawn in from the side forwards with a lot of pressure. A hose distributor attachment can optionally be attached to the air outlet side. possible uses The fans can be used in a variety of ways, for example: • for commercial use on construction sites to accelerate building drying • for drying water damage • for removing fumes • as a carpet dryer 3 different positions The fans can be installed in three positions: horizontal - blowing straight forward: this position pushes the air horizontally across the floor and drives moisture in carpets or from underlays into the room air. This speeds up the drying of the underlay massively. 45° inclined - blowing out diagonally upwards: For example, if damp walls or hanging objects need to be dried. Tilted 90° - blowing out upwards: for drying ceilings or for more even air distribution in rooms without stirring up dust. Characteristics • Maximum air volume of 4500 m³/h • Three fan speeds (1 = 520W, 2 = 550 Watt, 3 = 620 Watt) • Impact-resistant housing made of robust “Linear Rotational Plastic” (rotated plastic) • Strong high-performance single-phase motor with starting and working capacitor (PSC motor) • Operation and air flow possible in three different positions (air angle positions 0°, 45°, 90°) • Easy to carry and transport thanks to its compact design and handy carrying handle • The device is ready for use immediately (no installation or assembly required) • No adjustments in case of power failure (device continues where it was interrupted) • Stackable (several identical devices can be stacked on top of each other for operation and storage)   continuous operation This fan is designed for high air circulation, even over long periods of time. However, to avoid excessive wear, it should be switched off for 1-2 hours after 48 hours of continuous operation so that the motor can cool down completely.     Technical data Tension 230V ~ 50Hz Max. power consumption 880 W (3.9 A) Max. air circulation 4500 m 3 /h fan speeds 3 (3 = 620W, 2 = 550W, 1 = 520W) Max. speed 1300 rpm dimensions (H x W x D) 51 x 43 x 48 cm Weight 12.6 kg cessation of operations rotary switch Swiss plug Yes, 3m cable guarantee 2 years

Read more less

The TG60L is a very reliable, industrial drum blower with a high air flow rate and low power consumption. It is ideal for commercial use, for example in building drying, for supporting water damage drying, but also for agriculture. The power fan is made of sturdy metal and stands well in the rack even when running at full speed. The rack itself has two wheels on one side and two feet. The fan can be lifted and rolled away using practical handles to move it. Thanks to the tubular housing, the axial fan not only spreads the air high and wide but also has a considerable throw distance. The amount of air circulated can be regulated in three stages using the rotary control on the back. Characteristics • Powerful axial fan with up to 5900 m3/h air circulation • Robust metal housing with rack, wheels and handles • Durable high-performance motor, adjustable in three stages • Metal rotor blades • Drum tilt can be rotated 180° • Splash-proof (IP24) • Retains the setting even in case of power failure • Top price/performance ratio Due to its dimensions, this device will always be shipped via courier (regardless of the shipping method chosen at checkout). If you need even more air pressure over a longer distance or want to suck in or discharge the air with a hose, also consider the WM120 model. Technical data   air circulation speed max. max. 5900 m 3 /h 1345 rpm Tension 220 ~ 240V / 50Hz Max. power consumption 260 W (1.2 A) protection class IP24 operating noise Level 1: 1 / 2.5m distance Level 3: 1 / 2.5m distance 76 / 73 dB(A) 80 / 77 dB(A) diameter of the air duct approx. 63 cm Weight 18.8 kg Dimensions (H x W x D) 765 x 765 x 300 mm connection cable approx. 2m + CH plug guarantee 2 years  

Read more less

The WM120 is the "monster version" of the SHT28 axial fan. It has a very powerful air flow of 9600m³ /h and is suitable wherever a lot of supply or exhaust air is required. For example, in agriculture for ventilating livestock sheds, on construction sites, in industrial halls, etc. It is of course also suitable for parties or for ventilating marquees, photo shoots, etc. Measured against the air output, the consumption of just 750W is moderate; a normal 230V socket is sufficient to operate this wind machine. Optionally, the compressed air can be discharged with an air hose (available air hose lengths: 10m and 20m). This professional wind machine is very robust and designed for a long service life. The frame and housing are made of metal. The device has solid, removable metal castors with brakes to prevent the device from recoiling due to the high air pressure. Durable, high-performance motor. The air flow can be adjusted at an angle of 180° (vertical to horizontal). Characteristics • high air circulation of strong pressure in the distance • Swiveling air flow angle of 180° (vertical to horizontal) • Very robust metal housing/metal frame. • Equipped with a strong, durable high-performance motor. • Good mobility thanks to high-quality castors and rack. • Extremely easy to use. • No adjustment in the event of a power failure (device continues where it was interrupted). • The device is ready for use immediately (only the wheels need to be screwed on. If you wish, we can pre-assemble it for you free of charge when you pick it up). • Compliance with WEEE standards. usage examples Ventilation: • Ideal for ventilation or de-ventilation of large rooms • Removal of heat and vapours, e.g. in tunnel construction, mastic asphalt work and on construction sites • Agriculture: Ventilation of livestock sheds • Industry: Wind cooling of machines and trades • Removal of dust and odors Wind generation and others: • In the wind tunnel, when filling hot air balloons or for use on film sets, stage effects or photo shoots, these devices are ideally suited for this    Technical data   Tension 220 -240V / 50Hz power consumption max 1980W starting current (9A) Ø power consumption 750W operation (3.5 A) ventilation levels 1 max. air circulation volume 9600 m³/h speed max 1420 rpm sound pressure level (our measurement) 1m distance 83 dB(A) 2.5m distance 79 dB(A) Ø air duct 65cm Dimensions (H x W x D) 87 x 88 x 67 cm Weight 50 kg operating conditions Temperature: -5° - +40°C Humidity: 0 - 90% RH cessation of operations 2 push buttons ON/OFF protection class IPX0 Electrical protection class I Swiss plug Yes guarantee 2 years

Read more less

High-quality floor fan made of robust metal and the rotors made of aluminum. The fan head can be swiveled so that the air flow can be tilted in any desired direction. The device has three speed settings, a long-lasting high-performance motor and a practical carrying handle. It impresses with its good price-performance ratio and its easy handling. Ideal for supporting water damage drying or for air circulation in any room. Due to its high reliability, the fan is also suitable for unattended continuous operation. For example, the FE50X is also used in the Technorama, where it is in operation every day. Characteristics · Large fan head with plenty of air circulation · Three fan speeds, easily adjustable via rotary switch on the back · Blowing direction of the fan is horizontally infinitely adjustable · Made entirely of robust metal · Rotor blades made of 100% aluminum · Powerful, durable high-performance motor with copper coil · Handy, easy to transport thanks to carrying handle · Long power cable, approx. 2.40m length, Swiss plug · No assembly required, the fan is ready for use · Comparatively quiet operation · Robust motor housing · RoHs and CE compliant   Technical data  power consumption 120 watts max. rotor diameter 50 cm airflow Up to 8500m³/h, wide distribution speed levels Three cable length approx. 2.40m Connection Fixed adapter suitable for Swiss sockets Dimensions (W x H x D) 61 x 62 x 26 cm Weight 6.5kg scope of delivery plug-in fan, no assembly required guarantee 2 years  

Read more less

Solid little fans with a housing made of impact-resistant plastic. The radial fan blows the air into the room with good pressure and relatively quietly. Therefore also suitable for drying work in private environments, for example after water damage behind the kitchen counter, under the bathtub or to support drying after painting and plastering work. The turbo fan has a long-lasting single-phase motor and 350 m³/h air circulation. The fan is single-stage, i.e. on or off. The impellers are made of robust plastic. In contrast to cheaper models, the toggle switch is screwed, not welded. This means that this fan can be repaired in the event of a defect.   setup The fans can be installed in 3 different positions: horizontal - blowing straight forward inclined - blow-out diagonally upwards tilted - blowing out upwards   usage examples • for commercial use on construction sites to accelerate building drying • for drying carpets • for private purposes Option hose adapter and air hoses Our range includes suitable hose adapters for either 2 or 3 air hoses. These adapters are very easy to mount on the air outlet area and can be removed at any time. Technical data Tension 230V / 50Hz power consumption 80 W (0.4 A) ventilation levels 1 amount of recirculated air 350 m³/h blow-out speed approx. 8.5m/sec. sound pressure level (our measurement) Level: 1 / 2.5m Distance: 58 / 56 dB(A) Dimensions (H x W x D) 310 x 253 x 280 mm Weight 3.5 kg cessation of operations toggle switch Connection Swiss plug, approx. 3m cable guarantee 2 years

Read more less

The AD20 is a robustly built condensation dryer. It is light, handy and can be carried like a suitcase. Thanks to BlueDry technology, the AD20 dehumidifies reliably even at low humidity and temperatures. Another plus is the permanently installed, automatic condensate pump with overflow protection (delivery head up to 4 meters). Latest technology with environmentally friendly refrigerant R1234yf. service It is easy to operate using the innovative eDRY® electronics. All controls are clearly arranged and all important operating states can be called up at any time. The target and actual humidity are shown on the display. Operating hours (consumption) can be easily read. Energy consumption is shown using the additional, calibrated energy meter. The control system is equipped with a memory function. This means that in the event of a power failure, e.g. on construction sites, operation will resume with the same settings as soon as the power is restored. Robust housing made of impact-resistant plastic. It is easy to clean and can be easily dismantled for any service work that may be required. It has a fold-up handle. Lashing straps can be attached to each side. The fused socket is used to connect additional devices. Features and Benefits • Housing: made of robust, impact-resistant and UV-resistant plastic, lightweight at only 16.4 kg. • Cable: integrated cable winding. • Installation: freestanding or mounted on Aercube system (fixing points for AERCUBE lashing system). • Air flow: transverse, side intake and outlet. • Air filter: Protects the device from dust. • Fan: 2-speed, energy efficient EC fan. • Defrost: Demand-controlled hot gas defrosting. • Condensate pump: Automatic water pump with overflow protection integrated as standard. • Blue-Dry technology: For particularly energy-saving operation – even at low humidity and temperatures. • Calibrated energy meter (MID compliant). • Memory function: After a power failure, it resumes operation with the same settings. Therefore, it is also suitable for operation with a timer, for example. • Hot gas defrosting: Can also be used in cooler environments thanks to automatic self-defrosting. • Suitable for unattended continuous operation. • Own design: available in all colours and with your logo for larger quantities. All AERCUBE system components are 100% compatible with each other and stackable.  Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity.    dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +1°C and +34°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under different (constant) ambient conditions: 30°C / 80% rF = 18.0 liters / 24h (power consumption: 350 W) 27°C / 60% rF = 11.0 liters / 24h (power consumption: 310 W) 20°C / 60% rF = 9.0 liters / 24h (power consumption: 260 W) 10°C / 70% rF = 5.0 liters / 24h (power consumption: 215 W) (RH=relative humidity)        Technical data  Tension: 230V / 50Hz Power consumption: max. 350W Sound pressure level: 1 m distance 54 dB(A) 2.5 m distance 51 dB(A) 3 m distance 50 dB(A) Dehumidification performance: max. 18.0 liters / day (30°C / 80% RH) bucket / pump No bucket. Integrated pump with overflow protection, 4 m discharge head. air circulation level 1/2 200 / 270 m³/h refrigerant: R1234yf Dimensions (H/W/D): 420 / 320 / 500 mm Weight: 16.4 kg Operating setting: Digital Ambient temperature: +1°C - +34°C Application area: up to approx. 50 m² Swiss plug: Yes Operating hour meter: Yes Guarantee: 2 years

Read more less

The silencer "SD2" is an element of the Aerial-Aercube series. It can be integrated into the Aercube drying system and reduces the operating noise by up to 19 dB(A), which can be particularly helpful in residential properties. An optional activated carbon filter can also be inserted into the housing to reduce odors. Advantages and Features • Reduces operating noise by up to 19 dB • Reduces odors when using the optional activated carbon filter • Suitable for Ø 38 mm and Ø 50 mm hose systems • Ready to connect with up to 270 m³/h air flow • Easy-to-open safety quick-release fasteners • Various grip and carrying options • Robust AERCUBE housing The SD2 does not require its own power connection. It is suitable for continuous operation and can be combined with all elements of the Aercube system.   All AERCUBE system components are 100% compatible with each other and stackable. Technical data Tension: does not require electricity Air flow: up to 300m³/h Weight: 6 kg Dimensions H x W x D: 300 x 390 x 490mm Operating temperature: -10°C - +40°C Guarantee: 2 years, housing 5 years

Read more less

The HEPA filter system "HF2" is an element of the Aerial-Aercube series. Using a class G4 pre-filter and a HEPA filter H13, it cleans the air drawn in with a purity rate of almost 100%. It cleans the air very effectively, particularly in dusty construction environments and when remediating mold, and prevents dust, spores or viruses* from spreading throughout the building. It is suitable for continuous operation and can be combined with all elements of the Aercube system. A sensor measures the degree of contamination of the filters and automatically reports when they need to be changed via an LED display on the front of the housing. The HF2 itself does not require a power connection, but works purely with the air flow from the supplying devices. The LED display is therefore powered by a CR2032 battery (round flat battery). The battery charge level can be checked at any time by pressing a button. Thanks to two quick-release safety fasteners, the device can be opened quickly and the filters can be easily changed. The filters are disposable products and can be reordered individually. Features and Benefits • Efficient filter system with built-in H13 HEPA filter and G4 pre-filter • LED display informs about dirty filters • Suitable for Ø 38 mm / Ø 50 mm hose systems • Ready to connect with up to 270 m³/h air flow • Easy-to-open safety quick-release fasteners< • Various grip and carrying options • Robust AERCUBE housing • Battery check at the push of a button All AERCUBE system components are 100% compatible with each other and stackable.     Please note The shape and design of the pre-filter and HEPA filter was changed a few years ago. When ordering replacement filters, please make sure you order the version that fits your device (round/square).    *Regarding cleaning effect against the corona virus Coronaviruses have a diameter of approximately 60 - 160 nm (60 nm = 0.00006 mm). The HEPA filter in this device cleans particles up to 0.0003 mm in size. The virus is therefore smaller than the purity rate of the filter. But: viruses do not fly individually in the air, but are always enclosed in larger droplets (so-called aerosols). In human breath, the smallest droplets have a size of approx. 1 µm = 0.001 mm (when coughing: 10 µm = 0.01mm). The HEPA filter therefore catches the aerosols and also cleans the air of COVID19 viruses. Of course, there is no 100% protection, as an air purifier does not clean the entire room volume at once and because surfaces can also be contaminated by touch. However, the device is very effective and recommended for reducing risk, e.g. in waiting rooms, classrooms, offices or even in private environments.  Technical data Tension:  does not require a power connection. LED display is powered by a round flat battery CR2032 Air flow: up to 270m³/h Weight: 6 kg Dimensions H x W x D: 300 x 390 x 490mm Control panel: LED indicator for filter change "Battery Check" button Guarantee: 2 years, housing 5 years

Read more less

The VP6 sound boxes are suitable for intensive use in water damage drying. They generate pressure that can be used for both suction and blowing. They work with air-cooled side channel compressors in the robust AERCUBE housing. Thanks to various handle and carrying options, the devices have excellent handling properties. A lashing system creates additional stability during transport or storage  Features and Benefits Air-cooled side channel compressor, vibration-damped mounting 1280 W motor power For drying areas of approx. 50 – 70 m² Intelligent E.DRY electronics with full-text display Bar graph and multi-colored LED for reading the back pressure Operating and kWh meters can be read without electricity Very quiet thanks to highly efficient sound insulation technology Easy-to-open safety quick-release fasteners Various grip and carrying options Extremely robust AERCUBE housing Integrated cable winder with magnetic plug holder  All AERCUBE system components are 100% compatible with each other and stackable. Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use. Technical data Tension: 1 x 230V / 50 Hz Power consumption: 1280W max. Hedging: 10A air volume flow Level 1: 80 m³/h up to 15m² Level 2: 140 m³/h up to 30m² Level 3: 190 m³/h up to 50m² Level 4: 250 m³/h up to 70m² Sound pressure level: 1 m distance max. 61 dB(A) (night mode: 57dB(A) 3 m distance max. 57 dB(A) (night mode: 54dB(A) Max. differential pressure Vacuum: 220 mbar Pressure: 270 mbar Weight: 15 kg Dimensions H x W x D: 507 x 390 x 455 mm Operating temperature: 0°C to +38°C Control panel: • Electronics with full-text display to show the device status. • Bar graph and LED for reading the back pressure. • Display: Operating hours • On/off switch • Device socket with fuse (max. 8 A) • 2-fold temperature monitoring • Safety shutdown in case of overload • calibrated energy meter (MID compliant), can be read without power Swiss plug: Yes Guarantee: 2 years, housing 5 years

Read more less

The water separator "VT2" is an element of the Aerial-Aercube series. It can be integrated into the Aercube drying system in combination with the sound boxes VP2 - 6, for example to extract standing water from under subfloors. Suitable for both clean and dirty water. The suction pressure is thus generated by the sound boxes. Inside the "VT2" there is a level controller and a Grundfos pump, which automatically pumps out the water that has been sucked in at intervals as soon as a certain level is reached. The waste water container holds 20 liters. Thanks to the closed housing construction, the "VT2" can even be used in standing water up to a maximum depth of 30 cm. Two safety locks prevent water from getting into the device. After use, the remaining water can be completely drained using a drain screw. Cleaning the device is very easy. The "VT2" is controlled by EDry electronics. The following elements are located on the control panel: • On/off switch. • "Info" button: to query the total amount of water pumped since the last switch-on (tamper-proof). • Fuse device socket 16A. • Device socket (to control the sound box). • Button for pumping out the remaining water. • LED display for querying flow rates, time of last pumping, etc. Features and Benefits • Powerful dirty water pump for industrial applications. • Discharge head of waste water up to max. 7 m. • Full text display shows all important operating states. • Drain plug for easy drainage of residual water. • Easy-to-open safety quick-release fasteners. • Various grip and carrying options. • Robust AERCUBE housing. • Display of the amount of water pumped out (total and per construction site as well as the time of the last pumping process). • Electronic level control. • Manual pumping at the touch of a button. • suitable for continuous operation.   All AERCUBE system components are 100% compatible with each other and stackable. Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use. Technical data Tension: 230 V / 50 Hz Recording: 380W Weight: 18 kg Dimensions H x W x D: 507 / 390 / 490 mm Operating temperature: +3°C to +38°C feed pump: Grundfos CC7 lifting height max. 7m flow rate 9 m³/h container volume: 20 liters Protection class: IP44 Guarantee: 2 years (5 years housing)

Read more less

The VP3 sound boxes are suitable for intensive use in water damage drying. They generate pressure that can be used for both suction and blowing. They work with air-cooled side channel compressors in the robust AERCUBE housing. Thanks to various handle and carrying options, the devices have excellent handling properties. A lashing system provides additional stability during transport or storage.  Features and Benefits Air-cooled side channel compressor, vibration-damped mounting 1100 W motor power For drying areas of approx. 30 – 50 m² Intelligent E.DRY electronics with full-text display Bar graph and multi-colored LED for reading the back pressure Operating and kWh meters can be read without electricity Very quiet thanks to highly efficient sound insulation technology Easy-to-open safety quick-release fasteners Various grip and carrying options Extremely robust AERCUBE housing Integrated cable winder with magnetic plug holder   All AERCUBE system components are 100% compatible with each other and stackable. Aerial "eDRY®" for efficient air dehumidification The prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very precise measurement and control of the room humidity. The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use. Technical data Tension: 1 x 230V / 50 Hz Power consumption: 1100W max. Hedging: 10A air volume flow 150 m³/h Sound pressure level: 3 m distance max. 48 dB(A) Max. differential pressure Vacuum: 170 mbar Pressure: 190 mbar Weight: 15 kg Dimensions H x W x D: 507 x 390 x 455 mm Control panel: • Electronics with full-text display to show the device status. • Bar graph and LED for reading the back pressure. • Display: Operating hours • On/off switch • Device socket with fuse (max. 8 A) • 2-fold temperature monitoring • Safety shutdown in case of overload • calibrated energy meter (MID compliant), can be read without power Swiss plug: Yes Guarantee: 2 years, housing 5 years

Read more less