heaters

45 products

  • Express Keramikheizung 2 kW Master MASTER B2 - PTC - ambiento.ch

    Master Express ceramic heater 2 kW Master MASTER B2-PTC

    The "B2-PTC" is a very effective fan heater for rooms, cars, caravans The ceramic heating element has an incredibly good efficiency ratio of energy used to heat generated. It is therefore ideal wherever only normal household sockets are available but maximum heat output is required. Another thing that stands out is the much faster heating phase, as the fan heater reaches operating temperature within a few seconds. It heats the air by a full 65°C (difference between air intake temperature and air outlet temperature), which is almost twice the difference compared to conventional building heaters. This heater should therefore not be placed within reach of children. The heating output can be selected in two stages: 1000W or 2000W. The target temperature is determined via a stepless thermostat controller. Normal current 230/V, min. 10 amps, Swiss plug with connection cable. product advantages • Room thermostat included • No oxygen consumption • Odorless, no exhaust fumes, no condensation • Quiet running • Motor with thermal protection • Overheat thermostat • Built-in thermostat • Automatic reset  Technical data  Dimensions (W x H x D) 200x200x200 mm Weight 2.5 kg Color housing metal yellow powder-coated protection class IP21 heating output selectable 1000 / 2000W insurance 8.7 A motor voltage 230 V motor current 0.2 A airflow 97 m³ / h temperature range 0 - 40 °C guarantee 2 years

    CHF 29.00

  • Steckdosen - Heizlüfter TFC 1 E - ambiento.ch

    TROTEC socket fan heater TFC 1 E

    The "TFC" is the simple solution for quick heat at home or on the go. Small and handy, it fits in any bag or luggage. It is plugged directly into the socket without a cable and provides an amazing heat output after just a few seconds thanks to the 500W ceramic element. The design is attractive and is therefore suitable for use in the living room or bedroom, and of course also for temporarily heating the bathroom, hobby room or workshop. The ventilation can be set to two levels: strong/weak. The operating noise is quieter on the weak level, but can be described as quite quiet even on the strong level. The small fan level is for normal operation, the second is used for rapid heating to quickly distribute the warm air throughout the room. The effective mini heaters can generate heat wherever you need it within minutes - without having to heat the entire house or apartment.    Easy operation   Operating the plug-in fan heater is extremely simple: plug it in, switch it on and use the thermostat on the LED display to select a desired temperature between 15 and 30 °C. Done. A room can also be heated up to 12 hours in advance using the timer. Perfect for preheating the bathroom in the morning, for example. The model is also equipped with an energy-efficient automatic switch-off when the target value is reached.   Emission-free heat  The heated air always remains pleasantly clean because PTC ceramic heating elements generate heat that is emission-free. In contrast to conventional fan heaters with heating wires, no dust particles or even animal hair are burned on the ceramic heating element. This protects the sensitive airways of allergy sufferers as well as those of small children and sensitive people.   Safety is included with plug-in fan heaters  The heating plug is absolutely reliably protected against overheating. The fireproof ceramic elements have an extremely long service life and, due to the nature of the system, the heating wires in all ceramic heaters cannot burn out. The fan run-on function with countdown automatically cools down the heating element of the mini fan heater 60 seconds after the heater is switched off, so that it can be safely unplugged from the socket.   Faster air heating – more pleasant climate  Trotec fan heaters with PTC ceramic heating elements are characterized by faster heating behavior compared to conventional heating coil technology. Ceramic heaters also keep the room temperature more even, which creates a more pleasant living environment.   Advantages for practice: Fast and pleasant warmth Quiet and compact economical PTC heating element Suitable for rooms up to 10 m² / 25 m³ Automatic shutdown when the set temperature is reached fan run-on function with countdown 2 ventilation levels Temperature control from 15 °C to 30 °C timer function (1-12 hours) LED display overheating protection Suitable for allergy sufferers energy efficient  scope of delivery   The scope of delivery includes the original heater including a suitable adapter that fits all normal three-pin Swiss household sockets (type T13). Comparable devices: Eurom Heat Plug In - Ultraheat Pro - Valty Heater

    CHF 29.00

  • Dryfix Eco2 Heizlüfter 2kW - ambiento.ch

    Dryfix Dryfix Eco2 fan heater 2kW

    Benefit from incredibly low prices for construction heaters and fan heaters. The "Eco2" is handy but still robustly built. Ready for immediate use including cable and plug.   With metal housing (color: black), carrying handle, room thermostat, safety thermostat (protects against overheating), including 1.8m connection cable and Swiss plug 230 V (normal Swiss socket), 3-pin. After the target temperature is reached, only the fan (28 W) rotates to prevent the device from overheating. Heating can be selected in 2 stages: 1000/2000W.   Technical data  Tension 220V-240V / 50Hz power consumption 1000W / 2000W Protection min. 8.6 A room thermostat 4 - 40 °C air volume flow 180 m²/h protection class IP44 operating noise 1 m distance 51 db(A) (our measurement) Dimensions (H/W/D) 32 x 20 x 21 cm Weight 4.2 kg cessation of operations rotary wheel application area up to max. 20 m² Swiss plug: Yes guarantee 2 years EAN number 0745114 671509 How much heating power do I need? As a rough rule of thumb, for closed rooms with a normal ceiling height, you need around 1 kW of heating power per 10 m². This value depends on the insulation and the cold ingress into the room.

    CHF 36.00

  • Dryfix H2000 professional Heizlüfter 2kW - ambiento.ch

    Dryfix Dryfix H2000 professional fan heater 2kW

    Top price/performance The "H2000 professional" is a compact 2kW fan heater that can be connected to standard 230V household sockets. Ideal for heating rooms up to approx. 20m² on construction sites, but also for private use. The housing is made of robust metal with a practical handle, and the tubular air duct increases the throw compared to rectangular heaters. The device is fitted with a cable of approx. 1.6m in length and a three-pin Swiss plug. If required, suitable extension cables in various lengths can be ordered. Another important advantage of this heater is the position of the control, which is placed at the bottom of the device instead of at the top as usual. This protects the control from rising residual heat at the end of operation and thus from overheating of the electronics. This extends the life of the heater and prevents malfunctions. The function switch can be used to set the mode to either pure recirculation or heating mode. A continuously variable room thermostat keeps the temperature at the set value. When the desired temperature is reached, the heating switches off while the fan continues to run in order to always measure the correct temperature value in the room. design of this heater fan • Robust metal housing • Carrying handles • Room thermostat • Safety thermostat, protects against overheating • Incl. 1.6 m connection cable • Incl. cable and CH plug 230V, scope of delivery • Plug-in device • Carrying handle with two screws (can be easily mounted if required) • Cable approx. 1.60m / Q1.0mm² + Swiss plug T12 (3-pin, fits into a normal household socket)     How much heat do I need?   Our free heat requirement calculator helps you determine the required heating output for your rooms. Click here to go to the online calculator: Calculate heat requirement   Technical data  Performance 2 kW air volume flow 291 m³/h room thermostat 4 – 40 °C dimensions (HxWxD) 275x195x210 mm Weight 2.9 kg power consumption 8.6 A max. power connection 230 V / 50Hz connection cable 1.6 m Plug 230V, 3-pin (= normal household socket) protection class IP44 overheating protection at 55°C security certificates CE / LVD / EMC / RoHS / Erp thermostat continuously variable 2 levels 30 W (recirculation only) and 2 kW heating

    CHF 39.00

  • Heizlüfter Master B2EPB - ambiento.ch

    Master fan heater Master B2EPB

    Electric fan heaters are highly efficient devices that are used in a wide range of applications. They provide clean, fast and safe heating. Electric heaters are particularly suitable for temporary or emergency heating because they are easy to use, easy to carry and therefore mobile. Only the best quality components are used in the Master electric fan heaters, which makes the devices robust, durable and powerful. Important functions Automatic reset Integrated room thermostat No oxygen consumption No exhaust fumes, odorless, no condensation Summer/winter switch only for ventilation mode Quiet operation Motor with thermal protection overheat thermostat Adjustable heat Technical data: Model: B2 EPB Heating power: 2 kW Mains voltage: 230V / 50Hz Switching level 1: Fan Switching level 2: Fan plus 1 kW heating Switching level 3: Fan plus 2 kW heating Room thermostat: stepless Temperature working range: 5 - 35°C Protection class: IP24 Device dimensions (L x W x H): 220 x 200 x 330 mm Net / gross weight: 3.7/4.2 kg Suitable for: agriculture automobiles buildings and commercial areas field camps and field hospitals construction industry data centers and telecommunications emergency services events and temporary buildings Industry and Production Defense and Aerospace rental and leasing

    CHF 49.00

  • Trotec IRS Terrassen - Stand - Heizstrahler IRS 1200 E - ambiento.ch

    TROTEC Trotec IRS patio heater IRS 1200 E

    This infrared heater is perfect for keeping feet and legs warm under a table. Whether outdoors, in the conservatory or at work. The heat is stored in the table top above, so that a pleasant warmth collects in the leg area. Even when positioned next to or within a seating area, the device radiates its pleasant infrared heat comfortably and evenly at seat height. The infrared technology generates heat immediately, without a long warm-up phase. The heat is distributed evenly around the device. Thanks to its light weight and carrying handle, the heater can be set up or supplied quickly.       Safely protected from rain and dust   Neither damp weather, sudden rain nor dust can harm the robust standing heater. The high-quality aluminum housing is protected against dust deposits, splashes and water jets in accordance with protection class IP55.     Low Glare: Less light, more atmosphere   So that you or your guests can enjoy time outdoors without glare and annoying red light, the spotlight has a long-lasting low-glare infrared tube with 80% less light emission, while maintaining high heat efficiency. The reduced proportion of red light creates a cozy candlelight atmosphere - ideal for cozy, warm evenings under a starry sky.   The high-quality carbon infrared tube generates heat based on the natural principle of solar radiation. And it is particularly energy efficient, as a large proportion of the energy used is converted into direct heat. It is not the air that is heated, but the objects and people in the immediate vicinity absorb the radiant heat, store it and release it back into their surroundings as secondary radiation. This heat distribution, which is based on nature, is carried out silently and without stirring up dust by a fan, which means that asthmatics, allergy sufferers and people with sensitive airways in particular can breathe in and out freely.     Enjoy warmth without fear of contact   In contrast to other heating solutions, the infrared heater is particularly safe. A close-meshed metal grid protects the carbon infrared heating tube from curious children's fingers, contact with legs or feet, and protects pets. In addition, a high-quality velour coating reduces the surface temperature of the protective grid, so that even direct contact does not pose an immediate danger.     Stable and stable in every situation   The plate-shaped base (Ø 20 cm) ensures a secure stand. The optimized weight distribution with a low center of gravity provides additional protection against tipping, so that tipping over is almost impossible when used properly. If the standing heater is accidentally knocked over, the integrated tilt switch automatically deactivates the stable device.     Fast commissioning   After the simple and quick assembly of the stand, this heater only needs to be set up and plugged in.     Advantages at a glance   • Infrared heat without preheating • Even heat distribution (360°) • Heating power 1200 W • Glare-free heat thanks to high-quality low glare carbon infrared tube – approx. 5500 hours of light with 80% light reduction • High-quality aluminum design housing • Protection against burns thanks to the high-quality velour coating of the protective grille of the infrared heating tube • Rainproof and protected against the ingress of foreign bodies, protection class IP55 • Space-saving column design with round base • Fits perfectly under the table to warm your legs • Clean, condensation-free and odorless heat – without any noise • No dust turbulence, therefore suitable for allergy sufferers • Tilt switch integrated in the device • Energy-efficient conversion of electricity into heat     Technical data   heating output 1200W on/off switch yes, single-stage heating type Short-wave infrared heat waves, low-glare tubes effective area approx. 5 m² voltage 220 - 240 V/50 Hz nominal current consumption max. 5.2 A Recommended coverage 10 A cable length approx. 1.8 m Plug EU plug with Swiss fixed adapter Dimensions W x H x D 200 x 650 x 200 mm (including stand) Weight 3 kg protection class IP55 (dust and water jet protected) remote control no LED display no parental controls anti-tip protection, velour-coated surface timer no Trotec article number: 1,410,003,908 guarantee 2 years    

    CHF 49.00

  • Trotec TCH23E Konvektorheizer - ambiento.ch

    TROTEC Trotec TCH23E convector heater

    Small parking heater with convection and fan   This mobile flat radiator brings energy-efficient heat and contemporary design to rooms and work areas that are rarely used or are not connected to the central heating system. The visually appealing convector impresses with its modern product design, clear shapes and ease of use. Switch it on, set the temperature and immediately enjoy pleasant convection heat. An intelligent heating system regulates the room temperature fully automatically and thus reduces power consumption as much as possible.     Intelligent thermostat control   A two-stage heating element with selectable heating output of 1000 or 2000W enables the rapid heating of rooms up to a size of 24 m² or 60 m³ - for example as an additional heater in living rooms or bedrooms or as a quick heater for heating hobby rooms and cellars or even as an emergency heater if a central heating system fails.   The integrated thermostat control, which automatically regulates the interior temperature to the desired target value, is as practical as it is energy-saving. The desired temperature level is conveniently and continuously set using a rotary thermostat on the side. Intelligent temperature sensors continuously monitor the room temperature and regulate the heating output to the desired temperature. If the target temperature is reached, the electrically operated heating element switches off until the room needs to be reheated. This saves electricity costs and makes the use of the heater more economical.     Quickly reach pleasant comfort temperatures   On cold days, you want to get warm as quickly as possible. That's why the convector has a switchable turbo fan in both heating levels for accelerated air circulation and warm air distribution.     Comfortably warm room temperatures thanks to convection   This device works with the effect of uniform convection heat. The room air is heated by electrically heated wires and rises as warm air. This creates a natural suction that draws cold room air into the device. This creates a constant circulation of warm air throughout the room, flowing into every corner. The heat spreads evenly everywhere, thus optimally preventing over- or underheating of individual areas. As soon as the preset heat level is reached, the device switches off and only switches on again when the room needs to be reheated to reach the target value again. The result is a comfortable warmth that fills the room - which is 100% clean, condensation-free and odorless thanks to the electric heating element.     Clean, comfortable warmth for   • Living spaces • Bedroom • Home office • Winter gardens • Hobby rooms • Holiday homes • Workshops • Garages • basement rooms   There are good reasons for or against using a convector with a turbo fan. If a room needs to be heated up in the shortest possible time, the strong fan setting is recommended so that the heat spreads through the room as quickly as possible. Operation without the ventilation switched on is noiseless; with the ventilation switched on, the noise of the fan is quiet or slightly louder depending on the setting. In quiet bedrooms, pure convection heat without the ventilation switched on is more pleasant.     Advantages for the practice   • Up to 2000 W heating output for clean, condensation-free and odorless heat • 2 heating levels (1000 W / 2000 W) • Turbo blower for faster air circulation • Stepless thermal control • Thermostat-controlled automatic operation • Frost guard function • Energy-efficient operation thanks to automatic shutdown when target value is reached • Maximum safety thanks to overheating and tipping protection • Silent heating (when the fan is not in operation) • Stable stand thanks to large adjustable feet • Integrated handle for easy transport   frost guard function   Ideal for short-term vacancies or rooms that are not constantly used. With the stepless thermal control of our mobile TCH convectors, you can also use the devices in the frost guard mode. The thermostat then automatically activates the heater to keep the rooms frost-free or to prevent them from cooling down too much. As frost guards, the TCH convectors are not only ideal for landlords or real estate companies - they also provide private individuals or business people with a practical function for keeping empty rooms or garages frost-free. Rooms, conservatories or cellars that are not connected to a central heating system can be reliably kept warm in this way.     Please note • The ERP table for this heater can be found in the "Documents" section • The device is only suitable for use in well-insulated rooms or for occasional use.       Technical data   heating output 1000 / 2000W heating type convection and fan Maximum room size 24 m² (60 m³) temperature range 0 - 40 °C voltage 220 - 240 V/50 Hz nominal current consumption max. 8 A power consumption max. 2000W Recommended coverage 10 A cable length approx. 1.7 m Plug EU plug with Swiss adapter Dimensions W x H x D 530 x 378 x 172 mm (including feet) Weight 3 kg protection class IPX0 on/off switch yes, step switch OFF - 1000W - 2000W thermostat control Yes LCD display no frost guard function Yes Auto-shutdown at target value Yes parental controls no timer no, operation with timer possible anti-tip device Yes operating noise without fan operating noise with fan noiselessly max. 50 dB(A) at 1m distance, 47 dB(A) at 2.5m distance guarantee 2 years  

    CHF 59.00

  • Trotec TFH2000E Ventilator mit Heizung - ambiento.ch

    TROTEC Trotec TFH2000E fan with heater

    Your turbo for heat or coolness in the entire room   This 2-in-1 fan heater is elegantly designed and equipped with innovative turbo spin technology. The all-rounder combines a pleasant feel-good climate in its modern design housing: a powerful fan heater and a low-noise fan. If you previously needed two separate devices to avoid sweating in the summer and to enjoy cozy, warm evenings at home in the winter, you can save money and space with the multifunctional 2-in-1 device.     Additional heating in winter, fan in summer   On cold days in winter or in the transitional period, when it is not warm enough in your own four walls, in the office or in your holiday home, the Turbospin technology provides cozy warmth and quick and even heat distribution. The power can be set to either 1200W or 2000W. Where conventional electric heaters often do not blow the heat far enough into the room, this fan creates more uniform room temperatures through a circulating air flow.   In addition to its electric heating function, it also has a turbine-powered ventilation mode with two manually selectable speed levels, so that you can always keep a cool head even on hot summer days. The fan's powerful air flow cools noticeably more freshly, as it circulates more than twice as much room air as a conventional fan with the same power without turbo spin technology. The fact that it runs very smoothly and is astonishingly quiet is another comfort plus.     How Turbospin technology works   In apartments with high ceilings, drafty areas or narrow rooms, the warm heating air often does not reach every part of the room, so that unpleasantly cold areas often remain. The cause of these temperature fluctuations in the room is insufficient air circulation. The warm heating air does not even reach the floor, but rises to the ceiling, cools down there and the further away from the radiator the room temperature also drops. The warm air is not distributed throughout the room.   The solution is called Turbospin: With its Turbospin technology, the device generates a more even air circulation throughout the room. The air is sucked into the fan from the back. There it hits the 5 particularly strongly curved rotor blades of the extremely fast-rotating impeller. These deeply curved fan blades ensure particularly powerful turbulence and enormous acceleration of the air flow. The spiral-shaped protective grille of the fan further forces the turbulence. The now strongly compressed air flow shoots out of the device as a rotating column of air and penetrates deep into the room. Cold and warm air zones in the room are broken through and mixed by the air flow. The escaping air flow hits the opposite wall or corner of the room and is reflected there on all sides. The air flows in constant circulation back to the back of the fan via the side walls and ceiling. There it is sucked in again and the cycle starts again. This effective turbo spin principle ensures that the air in your room is mixed and circulated to the maximum. The difference between the cooler floor temperature and the warmer ceiling temperature is significantly reduced and instead you feel a more even temperature throughout the room.   Isn't a conventional fan or heater enough? Many standard fans or heaters don't achieve the described air circulation effect with the same intensity. Their field of action is smaller due to the process, so you have to stay closer to the device to feel the desired heating or cooling. The turbo power of this model, on the other hand, is much stronger and is in a different league.     Cooling and heating – the right room climate for every season   Heating in winter: On cold days, the Turbospin technology ensures faster and more even room heating. In two-story maisonette apartments, which need to be heated more in winter due to their larger areas and stairs, the device can, depending on the installation and room size, improve air circulation to allow the heat to reach everywhere. Use the device as an additional heater with heating function, or as a fan, for example to distribute the cozy warmth of a fireplace in the room.   Cooling in summer: In the warm summer, the two-stage fan with its two cold settings provides pleasant cooling. The fresh breeze can be felt quickly in the room thanks to the strong air flow. Tip: Position the fan in the bedroom in front of the open window and blow the pent-up heat out of the room in no time early in the morning or in the evening. The fresh air in all areas of the room ensures a restful sleep.   Cooling turbo: This device is also ideal for supporting an air conditioning system. The fan distributes the cooled air over a large area of ​​the room, thereby increasing the cooling effect of the air conditioning unit.   Fresh air in autumn and winter: During the dry heating season, the apartment should be well aired at least once a day. Fresh air contributes to a greater sense of well-being and protects against colds. Blow the stale and dry heating air out of the window in no time.   Energy saving tip: Cold feet or noticeably cooler spots in the room are generally not the result of heating being set too low. Even poorly placed furniture or seating groups can lead to the warm air not being distributed optimally in the room. Therefore, increasing the room temperature rarely achieves the desired result - but instead leads to higher energy costs! This device can be used to increase the efficiency of permanently installed heaters or air conditioning systems. The heated or cooled air can be distributed more quickly and completely in the room through clever positioning, so that less additional heating or cooling is required.     Design, comfort and safety perfectly combined   The fan impresses with its clear aesthetics and a design that is based on the shape of a high-performance turbine. And with the transport handle embedded on the back, the device, which weighs just 2 kg, can always be set up exactly where you like it best.   The safety is also impressive: it's good to know that the robust cool-touch plastic housing does not heat up even at the highest heat setting. The internal heating elements do not transfer their heat energy to the casing or to the front or rear grille. This means that you can touch the fan heater without worry even after it has been heating for a long time. The integrated tilt switch protects against accidental tipping over. The heating coil is automatically switched off as soon as the otherwise stable device threatens to tip over. The fan also switches off automatically shortly afterwards. At the same time, a beep sounds to signal that the fan is no longer in an upright position. In addition, it has overheating protection and a fan run-on mode that blows the remaining accumulated heat out of the device after heating. Better safe than sorry.   Quieter than you'd expect: The powerful Turbospin technology is surprisingly quiet when in operation. The pleasantly soft, sonorous background noise of the escaping air flow is easy to ignore. This means you can enjoy either warmth or cooling in the bedroom or while watching TV, for example, without being distracted by loud background noises.   Automatic thermostat control: The temperature can be preselected in 3-degree increments from 18 °C to 30 °C on the clearly designed control panel. Once set, the automatic thermostat takes over temperature control. When the desired target temperature is reached, the heater switches off until reheating is required. This is not only convenient, but also reduces energy consumption.     Advantages for the practice   • 2-in-1 combination device: heater and fan • Up to 2000 watts of heating power for quick and pleasant warmth • Optimal heat circulation through Turbospin technology – thus wide distribution of warm air • Can be used flexibly in summer and winter months • Particularly quiet • Fan function with 2 cold settings • 2 heating levels (1200 W/2000 W) • Temperature control from 18 °C to 30 °C • Automatic shutdown when the set temperature is reached • Cool-touch housing – the external plastic parts do not heat up • Overheating protection • Anti-tilt switch integrated in the device • Fan run-on function • LED display • Operating indicator light • Secure footing • Energy efficient   Please note • The ERP table for this heater can be found in the "Documents" section • The device is only suitable for use in well-insulated rooms or for occasional use.          Technical data   204.51 m3 277.28 m3 /h /h heating output 1200 / 2000W heating type fan with switchable heating Maximum room size 24 m² (60 m³) Adjustable temperature 18 - 21 - 24 - 27 - 30 °C Suitable ambient temperature 0 - 35 °C voltage 220 - 240 V/50 Hz nominal current consumption max. 8.7 A power consumption max. 2000W Recommended coverage 10 A cable length approx. 1.60 m Plug EU plug with Swiss adapter Dimensions W x H x D 255 x 250 x 185 mm Weight 2 kg protection class II on/off switch Yes thermostat control Yes LED display Yes frost guard function no Auto-shutdown at target value Yes parental controls no timer no oscillation no anti-tip device Yes operating noise at a distance of 1 m Operating noise at 2.5m distance max. 53 dB(A) strong ventilation level max. 50 dB(A) strong ventilation level fan speeds 2 air volume level 1 air volume level 2 204 m³ / h 277 m³ / h guarantee 2 years

    CHF 74.00

  • BGP02 WDH Heizlüfter 2kW - ambiento.ch

    Aktobis BGP02 WDH fan heater 2kW

    A handy electric heater with very good heat efficiency thanks to the ceramic heating element. This brings the heater to the desired heat output with a short warm-up time. At the high heat setting of 2000 W, the air blown out is heated by more than 60 °C compared to the room temperature. The temperature controller has a wide range starting at 0 °C. The BGP can therefore also be used as a frost guard if the room temperature is to be kept just above freezing. The ventilation is a little quieter at around 120 m³/h compared to other electric heaters in this category, but the BGP's operating noise is barely audible thanks to its quiet radial fan. This model is therefore suitable not only for use in construction and industry, but also for heating quiet areas such as waiting rooms, living rooms or simply for keeping your feet warm under your desk.   The housing is made of black, fireproof plastic and a metal rack with a practical carrying handle. The fan head can be rotated vertically in a large radius of up to 90°, so that the warm air can be directed precisely to the desired location. Using two standard hooks, the device can even be hung on a wall (hooks not included). The heater has two rotary controls on the top of the housing: • left level control: ventilation only / 1200 W / 2000 W • right: stepless thermostat to regulate the desired temperature In addition, there is an operating light between the two controls that indicates when the heating is running. If the temperature is correct, the heating pauses (the ventilation also stops). If the temperature drops below the set value, operation starts automatically. The adjustable range of the temperature controller is 0° to 85°C, with an overheating protection that interrupts heating if the room temperature is too warm at around 40 °C. Due to the high air outlet temperature, the device should not be placed within reach of children or pets, although the solid front grill of this model poses significantly less risk of burns than similar fan heaters that only have a metal grille for the air outlet.  How much heat do I need?   Our free heat requirement calculator helps you determine the required heating output for your rooms. Click here to go to the online calculator: Calculate heat requirement     Technical data   Voltage: 220V-240V / 50Hz Heating levels: 2 levels 1200 W / 2000 W + pure fan level: 25 W Fuse min.: 9.1 A Room thermostat: continuously variable 0 - 85 °C Air volume flow: only one fan level our measurement: 120 m³/h (Manufacturer's specification: 170 m³/h) Protection class: IP20 operating noise (our measurement): 1 m distance: 39 dB(A) 2.5m distance: 36 dB(A) Dimensions: Height with handle: 32 cm Width: 30 cm Depth: 25 cm Weight: 3.1 Kg Operating setting: rotary wheel Application area: up to max. 25 m² Swiss plug: Yes + 1.30 m connection cable Warranty: 2 years    

    CHF 89.00

  • TCH2050E Wärmewellenheizer - ambiento.ch

    TROTEC TCH2050E heat wave heater

    Fast all-round heat for your home, conservatory or office   This heater heats effectively and quickly. Whether as additional heating in the apartment or generally for poorly heated rooms during the cold season. With a heating output of 2000 watts, it provides rooms up to 24 m² or 60 m³ with pleasant, comfortable temperatures - ideal, for example, in the living room, bedroom, children's room, holiday apartment, hobby room, party room, office, sales rooms or your conservatory.     Perfect combination of convection heat and infrared radiation   In contrast to many other heaters or radiators, the heat from this heat wave heater is not only emitted into the room from one direction. Instead, the combination of convection heating and mica infrared heating elements ensures that the heating can be felt all around. In addition, the heating elements heat up particularly quickly, so that the heat emission can be felt within just a few seconds. It is best to set up the device in the middle of the room so that you benefit from the even and fast 3D heat distribution. You can find out more about the functional principle of the heat wave heater below.     Thermostat control for high comfort and low energy consumption   Using the remote control and the intuitive membrane keypad, you can quickly and easily select 2 heating levels (1200 watts and 2000 watts). The current room temperature is always shown on the LCD display.   You can adjust the heating output to your room temperature optimally thanks to intelligent temperature control via thermostat. Simply enter your desired target room temperature in the range of 15 °C to 35 °C. The heater will now heat the room until the preselected temperature is reached and then switch off automatically. As soon as additional heating is required, operation starts again automatically so that the room temperature is kept constant. This process is particularly efficient and energy-saving because only as much heating is used as is necessary to ensure pleasant, comfortable warmth.     Quiet and dust-free heat   In contrast to electric fan heaters, this model does not have a fan and therefore does not stir up any dust in the room. This is particularly pleasant, not only for allergy sufferers and asthmatics. It also generates its heat completely silently, so it is recommended for use in the bedroom, for example. This means you can sleep relaxed and restful even in very cold rooms, for example if you are spending the first night in a holiday home that has not been used for a long time.     Timer function – programmable on and off   The practical 24-hour timer on the comfort heater is both convenient and energy-saving. If desired, the device can be switched on or off fully automatically after a set time (1-24 hours). For example, you can set the heater in the bedroom to switch itself off after you have fallen asleep. Or you can preheat the kitchen in the morning so that you can enjoy your coffee in the warmth.     A lot of security   To ensure safe heating operation, the heat wave heater is equipped with an overheating protection system that automatically switches the device off if there is a risk of heat build-up. The stable heater is also well protected against accidental tipping over, e.g. by pets, careless guests or boisterous children, because the integrated tilt switch immediately deactivates operation if it is tilted.     How do these heat wave heaters work?   The 3D heating system of this heater cleverly combines the advantages of a convector and an infrared heater, providing real all-round warmth in no time:   Efficient mica heating technology with mica plates: The 3-layer mica heating plates made of natural mica ore generate pleasant infrared radiant heat in a very short time, which, unlike conventional radiant heaters, is not only emitted from one direction but also to the front and back at the same time. Another advantage of the high-quality mica heating elements is that they heat the entire surface evenly. The intensive radiant heat is generated over the entire surface, without loss of power and without oxygen consumption. In addition, warm air rises from the hot mica heating elements. This creates a gentle air flow that distributes the heat even further throughout the room. This principle is called convection.   Room-filling warmth based on the principle of the sun: Infrared radiation works based on the natural principle of the sun. It does not heat the air, but rather the surfaces of the objects it hits. The objects store the heat and gradually release it back into the room, so that the heat continues to have an effect even when the heat wave heater has already been switched off. On the skin, infrared radiation creates the pleasant feeling of natural solar warmth.   Plus points: The pleasant warmth takes effect immediately and without any warm-up time throughout the room and does not have to be transported through the circulating air. The infrared radiation and the convection heat complement each other to create a three-dimensional all-round heating system. The heat radiated upwards, forwards and backwards heats the entire room evenly. For quick, comfortable warmth throughout the entire room - right into the furthest corner.     Healthy indoor climate Breathe healthily with the Stop-DryAir function: You no longer have to worry about overly dry heating air. In contrast to conventional heating technologies, where heating inevitably leads to a reduction in the humidity in the room, with the heat wave heating principle the existing humidity in the room to be heated remains constantly at the same level.   Especially in the cold autumn and winter months, the body finds cool temperatures unpleasant. Then the infrared heat lies on the skin like a soothing heat patch. The circulation and metabolism are stimulated, which in turn can have a soothing effect on muscle pain and the musculoskeletal system.     Striking black design The appearance also plays a big role, after all, the cool black heat wave heater is often the focal point of your room. The high-quality workmanship and the robust retro charm of the black metal grille set a striking design accent in your room ambience.     Rollable, compact and easy to transport   Thanks to its compact dimensions, the integrated smooth-running castors and the practical handles, the heater can be moved or carried quickly and easily from one room to another. This means you remain flexible and can use it in the office, in residential and business premises or, for example, in the wellness area. The integrated cable winder keeps things tidy during transport and storage and prevents tripping hazards.     Advantages at a glance   • Up to 2,000 W heating output for clean, condensation-free and odorless heat • 2 heating levels (1200 W / 2000 W) • 3D all-round heating system: combination of infrared radiation and convection heat • High-quality mica heating technology with mica plates • Thermostat-controlled automatic operation with target value pre-selection between 15 °C and 35 °C • Automatic temperature control • Current room temperature display • Stop-DryAir: no drying out of the room air • Timer function • IR remote control • LCD display • Energy-efficient operation thanks to automatic shutdown when target value is reached • Maximum safety thanks to overheating and tipping protection • Easy transport thanks to handles and integrated wheels • Silent heating Please note: The device is only suitable for use in well-insulated rooms or for occasional use     Technical data   heating output 1200W / 2000W heating type convection and infrared heat waves Maximum room size 24 m² (60 m³) temperature range 15 - 35 °C voltage 220 - 240 V/50 Hz nominal current consumption max. 8.7 A power consumption max. 2000W Recommended coverage 10 A cable length approx. 1.2 m Plug EU plug with Swiss adapter Dimensions W x H x D 640 x 660 x 260 mm (including feet) Weight 5 kg protection class IPX0 on/off switch yes, plus step switch 1200W - 2000W thermostat control Yes LCD display Yes frost guard function no Auto-shutdown at target value Yes parental controls no timer yes (1-24 hours) memory function yes (values ​​are saved, operation on timer possible) anti-tip device Yes overheating protection Yes guarantee 2 years

    CHF 89.00

  • Trotec TCH1510E Konvektorheizer - ambiento.ch

    TROTEC Trotec TCH1510E convector heater

    Comfortable warmth   When the days get colder in the transition period to autumn/winter, but the stationary heating system is still switched off for cost reasons, the ultra-flat design convector TCH 1510 E with its continuously adjustable heating output of 1500 watts via thermostat provides pleasant, odorless and noiseless warmth for well-tempered rooms - regardless of whether you use it as a wall-mounted or free-standing unit.     Stylishly styled   A large, highly efficient aluminum heating element measuring approximately 55 cm in length and aerodynamically shaped air outlets on the top of the device ensure rapid heat distribution in rooms up to 20 m² or 50 m³. Whether in a modern living environment, in an office environment, in the bathroom or in unheated conservatories, garages or holiday homes: wherever quick and/or additional heat is required, the design convector shows its power. It has protection class IP24 (splash-proof) and is therefore also approved for use in damp rooms. When installing in bathrooms, please ensure that there is sufficient distance to water.     Uniform convection heat   In the TCH series convectors, the air in the device is heated by electrically heated wires and rises as warm air, creating a natural suction that draws cold air into the device. This creates a constant circulation of warm air throughout the room, flowing into every corner. The heat spreads evenly throughout, preventing individual areas from being overheated or underheated. As soon as the preset heat level is reached, the device reduces the power and maintains the desired temperature.     Innovative window open detection prevents energy waste   Regular ventilation is essential for a good and healthy living environment. To ensure that no unnecessary energy is wasted during ventilation, the device has an energy-saving window open detection system. If the window is opened, the convector reduces the heating output in thermostat-controlled automatic mode until the window is closed again. Automatic temperature control of the room temperature and intelligent heating automation further reduce the already economical energy consumption. When the preset desired temperature is reached (between 0 and 50 °C), the heating element switches off fully automatically and only switches on again when additional heating is required. This means that the energy consumption of the convector remains pleasingly low and no expensive energy costs are thrown out the window.     Smart equipment for warm, comfortable times   The comfort features of the designer convector are rounded off by a room temperature and time display, two operating modes (automatic and weekly mode), stable feet for flexible use in different locations, a wall bracket, an operating hour display and an extra-long power cable for maximum freedom of movement.     Cozy, warm interiors with comfort   This heater works with the effect of uniform convection heat and, like this, it can be used almost anywhere in the private home or office: for example, as emergency heating when the main heating fails, as reliable transitional heating before the start of the heating season or for heating conservatories, garages, hobby rooms or basement areas that are not connected to a central heating system.     Operating hours display – keeps an eye on consumption   Whether you are a tenant or a landlord, it is sometimes helpful to know how much heating costs have been incurred in a certain period of time. With the practical operating hours display, you can monitor and log consumption down to the hour.     Weekly mode – individual heating times and temperatures every day   Every day is different. We usually spend more time at home at the weekend and the need for heat is correspondingly greater. A programmable weekly timer allows you to program individual heating times and room temperatures for each day of the week.   More heat at the weekend and less heat during the week when you leave the house in the morning: In weekly mode, individual room temperatures and heating times can be assigned to each day of the week. Very practical.     Child safety lock – for safe operation in the children's room   The child lock protects the convector's settings from curious children. Once activated, the device settings can no longer be changed via the control panel.     frost guard function   Ideal for short-term vacancies or rooms that are not used all the time. With the stepless thermal control, you can also use the devices in the frost guard mode. The heater is then automatically activated by a thermostat to keep the rooms frost-free or to prevent them from cooling down too much. As frost guards, the TCH convectors are not only ideal for landlords or property companies - they also provide private individuals or business people with a practical function for keeping empty rooms or garages frost-free. Rooms, conservatories or cellars that are not connected to a central heating system can be reliably kept warm in this way.     Advantages at a glance   • Up to 1500 W heating output for clean, condensation-free and odorless heat • Large heating element of approx. 55 cm length • Temperature range adjustable between 0-50 C° • Stepless thermal control • Innovative window open detection • Automatic temperature control / Intelligent heat automation • Frost guard function • Energy-efficient operation thanks to automatic shutdown when target value is reached • Current room temperature display • Timer function • Weekly timer • Operating hours display • LCD display • Child safety lock • Overheating protection • Can be used as a wall or floor-standing device • Frost guard function   Please note • The ErP table for this heater can be found in the "Documents" section • The device is only suitable for use in well-insulated rooms or for occasional use. • The selectable temperature does not always correspond to what can be achieved technically. The larger the room and the lower the basic temperature in the room, the less high temperature targets can be achieved. For example, in a well-insulated room of 15 - 20 m², temperature targets of a comfortable 20 - 25°C should be possible without any problems, but the maximum adjustable target of 50°C is not realistic with 1500 watts of power.     Technical data   heating output 1500W heating type convention Maximum room size 20 m² (50 m³) temperature range 0 - 50 °C voltage 220 - 240 V/50 Hz nominal current consumption max. 6.5 A power consumption max. 1500W Recommended coverage 10 A cable length approx. 1.8 m Plug EU plug with Swiss adapter Dimensions W x H x D 690 x 480 x 260 mm (including feet) Weight 6 kg protection class IP24 on/off switch Yes thermostat control Yes LCD display Yes frost guard function Yes Auto-shutdown at target value Yes parental controls Yes timer yes (one-time, weekly timer, weekday timer) anti-tip device Yes open window detection Yes guarantee 2 years

    CHF 95.00

  • Dryfix H9000 professional Heizlüfter 9kW - ambiento.ch

    Dryfix Dryfix H9000 professional fan heater 9kW

    Top price / performance A compact, powerful 9 kW fan heater for heating construction sites and industrial spaces. It has a robust metal housing with a practical carrying handle. The device is fitted with a cable of approx. 1.4 m in length and a CEE16A plug (high voltage). If required, suitable extension cables in various lengths can be ordered. The "H9000 professional" impresses in several ways compared to conventional fan heaters in this category: • It is smaller and lighter, but no less robust and of high quality. • The tube shape concentrates the air better and thus achieves a higher air speed and thus a better throw distance of the warm air jet into the room. • Control at the bottom instead of at the top of the housing: This protects the control at the end of operation from rising residual heat and thus from overheating of the electronics. This extends the life of the heater and prevents malfunctions. - Removable feet: if required, the heater can also be easily screwed onto a wall bracket if it is to have a fixed place. The function switch allows the device to be set to 4500 or 9000 W heating power or to operate as a fan only. A room thermostat keeps the temperature at the set value. When the desired temperature is reached, the heating switches off while the fan continues to run to always measure the correct temperature in the room. These fan heaters are ideal for use in garages, workshops, storage rooms, shops, greenhouses, sports halls and factories, as well as for various other applications. design of this heater fan • Robust metal housing • Carrying handles • Room thermostat • Safety thermostat, protects against overheating • Incl. cable and plug scope of delivery • Plug-in device • Carrying handle with two screws (can be easily mounted if required) • Cable approx. 1.40 m / Q2.5 mm² + CEE plug 5-pin 16 A (red/round plug, corresponds to the Swiss standard)   How much heat do I need?   Our free heat requirement calculator helps you determine the required heating output for your rooms. Click here to go to the online calculator: Calculate heat requirement     Technical data   Heating capacity: 9 kW Levels: only recirculation 55 W / 4.5 kW / 9 kW Air volume: 701 m³/h Air speed: 6.4 m / sec. (our measurement) Room thermostat: continuously variable 4-40 °C Sound level: 63 dB(A) at 2.5 m distance Dimensions (H x W x D): 370 x 250 x 370 mm Weight: 6.4 kg Maximum input: 12.4 A Connection: 400V / 50Hz Cable / plug: approx. 1.4 m Q2.5 mm + EURO CEE16A Test certificates: CE / LVD / EMC / RoHS / Erp Protection class: IP44 automatic overheating protection at 60 °C

    CHF 119.00

  • Dryfix Eco9 Heizlüfter 9kW - ambiento.ch

    Dryfix Dryfix Eco9 fan heater 9kW

    The "Eco9" is a high-quality, yet affordable 9kW fan heater for heating construction sites and industrial premises. It has a robust, stackable metal housing with rack. The device plug is located directly at the back of the housing (CEE16A). The connection cable itself is not included in the scope of delivery, but can be ordered inexpensively in various lengths and designs if required, e.g. acid-resistant PUR cables for construction sites or with plastic sheathing for private use. The function switch allows the device to be set to 4500 or 9000W heating power or just as a fan. A room thermostat keeps the temperature at the set value. When the desired temperature is reached, the heating switches off while the fan continues to run to ensure constant air circulation in the room. These fan heaters are also suitable for unattended operation during the cold season, for example in garages, workshops, storage rooms, shops, greenhouses, sports and factory halls as well as for many other applications. Design of these fan heaters: - Robust metal housing - carrying handles - room thermostat - Safety thermostat, protects against overheating - Incl. CEE socket 5-pin 16 A (corresponds to the Swiss standard) warranty 2 years Shipping costs for 1 item: from Fr. 12.- (based on B-Post, other shipping options can be found in the shopping cart).   Technical data Power: 9 kW 2 levels: 4.5 kW / 9 kW Air volume flow: 980 m³/h Room thermostat: 4 – 40 °C Sound: 52 dB(A) Dimensions (HxWxD): 490x355x300 mm Weight: 10.0 kg Current consumption: 12.4 A max. Mains connection: 400 V / 50Hz Connection cable: not included Plug: CEE16A Protection class: IPX4

    CHF 119.00

  • Trotec TIH400S Infrarot - Heizplatte - ambiento.ch

    TROTEC Trotec TIH400S infrared heating plate

    These infrared panels are ideal for providing previously unheated rooms with an effective heat source or for generating heat in specific areas, such as at the workplace, on the sofa or in the bathroom. The gentle heat waves are absorbed by solid materials such as furniture or walls, but also by people, and provide a pleasant warmth. Very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors. While traditional heaters have to heat the entire room, heating panels can be used to specifically heat desired areas. This saves a lot of energy and therefore costs.   application examples   Heating of living spaces: Whether living area, conservatory or bathroom, as a local additional heating system, the infrared flat heater creates heat directly where the residents need it. It can be mounted on the wall to save space and only needs a standard socket for heating operation. Use in the catering industry: As a freestanding or wall-mounted device, the heating plate is the optimal solution for the targeted heating of sales stands or terrace areas and is much more effective than conventional gas heaters. Faster drying of wall surfaces: When drying out or renovating buildings, infrared heating of suitable wall building materials causes capillary moisture transport towards the heated wall surface due to the temperature gradient, which, in contrast to diffusion, can transport significantly more moisture out of the wall in a shorter time. In plain English: drying is faster when the damp wall is illuminated with infrared waves. Workplace heating: With the optionally available feet, the heater can be placed vertically or horizontally anywhere for targeted heating. Ideal for cool workplaces, for example in the warehouse, behind refrigerated counters, in workshops or in large halls     Advantages at a glance   • Efficient heating process with environmentally friendly IR-C radiation • Heat transport via light waves - direct object heating without convective loss • Maximum efficiency: 100% of the electrical energy used is converted into heat output • Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust turbulence • Integrated hanging device for mounting on wall or mounting supports • Can also be used as a stand-alone device (suitable stands are available from us as accessories) • Ready to use - no additional installations or expensive modifications required   The ErP table for this heater can be found above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of power requirements for rooms up to 2.5 m ceiling height insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² each additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows: Area of ​​the room in m² x W/m² = required heating output in watts. Calculation example: For a room size of 10 m² with very good insulation quality and two external walls (50 + 10 W/m²), the recommended power requirement is 10 m² x 60W/m² = 600 W.       Technical data   heating output 450W heating type infrared heat waves Suitable room temperature 0 - 60 °C heating surface 0.43 m² heating levels 1 voltage 220 - 240 V/50 Hz nominal current consumption max. 2 A power consumption max. 0.45 kW housing aluminum cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 705 x 605 x 22 mm (without feet) Weight 4 kg protection class IP54 overheating protection Yes Trotec article no. 1,410,003,010 guarantee 2 years

    CHF 139.00

  • Heizlaterne WDH - 12HL - ambiento.ch

    Aktobis heating lantern WDH-12HL

    A pretty eye-catcher for cooler evenings on the veranda and in the winter garden. The device impresses with its very robust workmanship made of metal and fire-retardant plastic. Two highly effective carbon heating tubes with low glare and two heating levels (600 + 1200 watts).  Features & Benefits • Two heat settings selectable: 600 watts / 1200 watts • 180° rotation function • With carrying handle and therefore easy to move and/or put away • Suitable for outdoor use • Equipped with two individual carbon heating tubes, which have a low glare effect • High-quality workmanship made of metal and fire-retardant plastic • Protection class IP54, means protected against dust in harmful quantities and protected against splash water • Silent operation • Cable length: 180 cm usage examples Heat generation: terraces, balconies, winter gardens, workplaces, restaurants, tents, pavilions, workshops, garages, warehouses, cellars, sheds, gardens and for use in party areas and for hobbies etc. Technical data    operating voltage 220V-240V / 50-60Hz Max. power consumption 1200 W heating levels 600 W / 1200 W heating elements 2 carbon heating tubes Product dimensions (H x W x D) 600 x 300 x 300 mm protection class IP54 (protected against dust in harmful quantities and protected against splash water) Weight 5.3 kg scope of delivery Lantern, power cable EU plug with Swiss fixed adapter, operating instructions guarantee 2 years

    CHF 139.00

  • WDH 200LS Infrarotheizstrahler 2kW - ambiento.ch

    Aktobis WDH 200LS infrared heater 2kW

    The 200LS radiant heater is an inexpensive but high-quality infrared heater. It can be attached to the ceiling using the chain provided, similar to a lampshade, and thus provides warmth from above. It is ideal if, for example, a cozy table on the balcony or workstations in the basement, workshop or production halls need to be heated in specific areas. The 200LS has protection class IP24. This means that it is protected against splash water and is therefore suitable for both indoor and protected outdoor areas. The infrared heat is generated very quickly and is transmitted through heat waves, which keep people and objects warm. The heat is immediately noticeable even in windy and draughty conditions and is distributed downwards at an angle of 150°, which means that with a normal room height of around 2.5m, this means a radius of around 2-3 meters. Heater: The spotlight has 2 heating tubes of 1000W each, which can be switched on individually or together. The heating intensity can be set to 1000W or 2000W by pressing a button on the device itself or using the remote control included in the delivery. During operation, the heating tubes emit not only heat but also a bright light, which also provides sufficient light for the heated zone. LED light: The 200LS also has an LED lamp that can be switched on independently of the heating mode. It emits a subtle white light downwards. The luminosity of the heating tubes is stronger than that of the LED light, so the lamp is particularly useful when no heating is being used. The device is made almost entirely of metal and impresses with its very robust workmanship. Features & advantages over other heaters: • Equipped with two individual heating tubes • IP24 - therefore suitable for indoor and outdoor use • Heating power selectable 1000 watts or 2000 watts • Integrated, separately switchable LED lamp as a light source even without heating • High-quality workmanship, mostly made of metal • Includes remote control for selecting the heating level and for switching the LED light on/off. • Heat transfer without a fan using infrared technology, provides warmth even in drafts. • Silent operation • Compliance with WEEE standards • “GS” tested and of course with CE and EMC conformity Examples of use: For keeping warm the workplace, terraces, balconies, winter gardens, restaurants, tents, pavilions, workshops, agriculture, garages, warehouses, cellars, sheds, gardens and for use at work and for hobbies etc. 2-year warranty Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, other shipping options can be found in the shopping cart) Technical data Voltage: 220V-240V / 50Hz (normal household socket) Max. consumption: 2000 W Heating levels: 2 (1000 W / 2000 W) Dimensions (H/W/D): 265 x 430 x 430 mm Protection class: IP24 (protected against foreign bodies >12.5 mm and against splash water) Weight: 3.5 kg

    CHF 159.00

  • Trotec IR2005 Infrarotstrahler - ambiento.ch

    TROTEC Trotec IR2005 infrared heater

    Good heating performance with small space requirements   This matt black infrared heater is compact in shape and size. It is suitable for quickly heating balconies, terraces, trade fair and market stands, outdoor events, seating and standing areas in outdoor restaurants and similar areas that require little space. Whether in the cold winter, in spring when temperatures are still cool or on unexpectedly cool summer nights - this heater with digital display and remote control enriches outdoor areas all year round with pleasant summer temperatures without taking up much space.     Easy operation   The lightweight heater is easy to use and offers maximum functionality and heat intensity. It floods 8 - 14 m² areas with targeted, instant heat, either at the touch of a button on the device itself or via remote control. In contrast to conventional halogen heating tubes, the high-quality carbon infrared tube emits 80 percent less red light, but more pleasant infrared heat. The expected lifespan of this tube is around 10,000 operating hours.     Can be used as a wall or ceiling heater   As a wall and ceiling heater, the heater warms seating groups, standing tables and outdoor lounge areas with odorless heat without any preheating time. For easy installation of the carbon heater, a bracket that can be swiveled by 45°, including screws and dowels, is included in the delivery. The approx. 1.80 m long cable can be used to reach nearby sockets.     pleasant warmth   The pleasant infrared heat of the infrared heater can be felt on the skin immediately after switching it on. To adjust the heat intensity as required, the device has four heating levels with 800 watts, 1200 watts, 1600 watts and 2000 watts of heat output, which can be selected via the integrated control panel or the remote control provided.     Plannable heat outdoors   The heater has a practical 24-hour timer for energy-saving programming of a predefined operating time. Once set, the heater switches off automatically after a predefined number of hours (1-24 hours). This reduces unnecessary operating costs and makes it particularly easy to use in commercial applications.     Safe and Weatherproof   For maximum safety, the infrared heater has a self-triggering overheating protection. If the maximum permissible operating temperature of the heater is exceeded, a safety thermostat switches operation off fully automatically. Another plus point - especially for professional use in the catering industry - is the designer aluminum housing constructed to protection class IP55, which means that the jet-proof infrared heater reliably withstands wind and rain.     Infrared heat: As pleasant as the sun   The radiator heats its immediate surroundings using the natural principle of the sun. Unlike devices with heating wires, the infrared rays do not heat the surrounding air, but only the surfaces and people they hit. The objects illuminated (e.g. furniture, walls and ceilings) absorb the heat and store it, then gradually release it again. The objects thus serve as additional energy and heat storage - even when the device is switched off, which further increases the efficiency. The heat radiation creates a pleasant feeling of warm sun rays on the skin in summer.   Everyone perceives temperatures differently. Our individual perception of heat is influenced, for example, by the distance from the heat source. The closer the distance to the heater, the smaller the area illuminated - the greater the distance to the heater, the larger the area illuminated. The 2000 watt carbon tube is recommended for outdoor areas of around 8 m² in cold environments or 14 m² in slightly temperate environments.     No disturbing emissions   In contrast to electric heaters, the clean and condensation-free instant heat is generated without dust turbulence, annoying noises and unpleasant smells.     Low Glare: 100% heat, 80% less light   Conventional infrared heaters without low glare technology often emit an intense orange-reddish light along with the heat radiation, which many people find warm and cozy. However, to ensure that the surroundings are not illuminated too brightly or even disturbed, the IR 2005 from Trotec has a carbon infrared tube with light-reducing low glare technology.   Advantages of Low Glare Technology Romantic candlelight atmosphere: Low glare shortwaves produce a larger proportion of infrared light from the invisible light range - and do so without reducing the heating output. In addition, the infrared radiation is concentrated using an innovative coating process on the tubes, which reduces scattering losses. Overall, Trotec carbon heaters with low glare technology therefore achieve a brightness reduction of up to 80% with an expected service life of around 10,000 hours.   Full heat output with less brightness: Since the perceptible light is significantly reduced, the immediate vicinity of the heater creates the impression of a cozy candlelight atmosphere and the ambience is noticeably more pleasant. An existing lighting concept on the terrace or in the restaurant is overall less affected.   Note: Low glare carbon heating tubes look just as intensely reddish as conventional infrared heaters without low glare. In reality, however, they emit 80% less visible light. With the same heat output - for more comfort and romance.     Advantages at a glance   infrared heat without preheating • Four heat settings, up to 2000 watts of heat output • High-quality carbon infrared tube – approx. 10,000 hours of light with 80% light reduction • Even and targeted heat distribution • Clean, condensation-free, odorless and completely noise-free • No dust turbulence, therefore suitable for allergy sufferers • Protection class IP55 – jet-proof professional device • 24-hour timer for fully automatic shutdown • LED display • Robust aluminum housing • Adjustable 45° tilt angle – with large field of action • Suitable for wall and ceiling mounting • Infrared remote control • Integrated hanging device • Energy efficient         Technical data   heating output 2000W heating levels 800 / 1200 / 1600 / 2000W heating type infrared heat waves heating tube Carbon, Low Glare effective area max. 14 m² voltage 220 - 240 V/50 Hz nominal current consumption max. 8.6 A power consumption max. 2000W Recommended coverage 10 A cable length approx. 1.8 m Plug EU plug with Swiss fixed adapter Dimensions W x H x D 900 x 175 x 105 mm Weight 3 kg protection class IP55 on/off switch Yes overheating protection Yes display no frost guard function no parental controls no timer yes, 1-24 hours Housing aluminum remote control Yes tripod optionally available Trotec article no. 1,410,003,208 guarantee 2 years

    CHF 159.00

  • 9kW fan heater Remington REM9EPB

    Master 9kW fan heater Remington REM9EPB

    This powerful electric heater with a 400V/16A connection impresses with its good price-performance ratio and its ease of use. The device is very effective, made almost entirely of metal and is therefore extremely robust. Ideal for commercial and demanding use. There is a socket for a connection cable on the device itself. You can find suitable connection cables in our accessories. Characteristics • Heating power adjustable up to 9000 watts • Thermostat for regulating and setting the desired temperature • Two heat levels selectable (1 = 4500 watts / 2 = 9000 watts) • Pure fan operation also possible without heating function • Also suitable for continuous operation • Overheating protection • Continuous temperature control (5 ~ 35° C) • Integrated protection mechanism against overheating • No adjustments in the event of a power failure (device continues where it was interrupted) • Very easy mobility thanks to handy carrying handles • The device is ready for use immediately (no installation or assembly required) • Quiet operation • No oxygen consumption • CE compliant, 2006/95/EC, 2004/108/EC, EN 60335-1, EN 60335-2-30 • Made in Italy Miscellaneous • To operate this heater, a five-pole 16 A power connection 380V/415V (50/60Hz) with CEE16A plug is required. • As with all high-voltage fan heaters, heating stops when the set target temperature is reached, while ventilation continues to run to protect against overheating. • No power cable included in delivery, the plug is located directly on the device. You can find suitable power cables in various lengths and designs from us. usage examples Temperature regulation: construction sites, workshops, agriculture, apartments, garages, warehouses, cellars, sheds, garden sheds, laundry rooms and for use at work and for hobbies, etc. Drying: Ideal for faster drying of plaster, screed, etc. (work can continue or be applied very quickly) Damp rooms: Ideal for damp cellars, old walls and drying all damp objects Damage repair: After flooding, after damage caused by fire-fighting water or in the event of rot, these devices are ideal for supporting the drying process. How much heat do I need? Our free heat requirement calculator helps you determine the required heating output for your rooms. Click here to go to the online calculator: Calculate heat requirement Technical data   Tension 380V - 415V / 50Hz power consumption 2 levels 4.5 kW / 9 kW Protection max. 16 A room thermostat 5 - 35°C air volume flow 800 m³/h protection class IPX4 Dimensions (H x W x D) 41 x 42 x 32 cm Weight: 9 kg cessation of operations rotary wheel application area up to max. 90m² Plug CEE 16 A guarantee 2 years

    CHF 159.00

  • BGP09 WDH Heizlüfter 9kW - ambiento.ch

    Aktobis BGP09 WDH fan heater 9kW

    Powerful construction heater with 400V / 16A connection for heating construction sites and industrial spaces. Very good price/performance ratio with easy handling. The device is very effective and made almost entirely of metal and is therefore extremely robust. The connection cable of a good 1m in length and the CEE16A plug are included in the scope of delivery. As accessories, we offer extension cables in various lengths at reasonable prices. WDH® is a quality product or a brand that is almost exclusively available through specialist retailers. Quality standards include: durability, compliance with the specified performance, tested by TÜV “GS”, of course with CE conformity, recyclable materials, etc. The WDH 9kW series is optimized according to the latest technical knowledge.     Advantages at a glance   • Heating power adjustable up to 9000 watts (9 kW) • Thermostat for regulating and setting the desired temperature • Two heat levels selectable (1 = 4500 watts 2 = 9000) • Pure fan operation also possible without heating function • Also suitable for continuous operation • Overheating protection and protected against splash water and small foreign objects (IP24) • Continuous temperature control (0 ~ 45° C) • Integrated protection mechanism against overheating and reset function • No adjustments in case of power failure (device continues where it was interrupted) • Very easy mobility thanks to handy carrying handles • The device is ready for use immediately (no installation or assembly required) • Quiet operation • No oxygen consumption • Intertek “GS” tested and CE compliant • WEEE standards   Miscellaneous • To operate this heater, a five-pole 16 A power connection 380-400 V (50 / 60 Hz) with CEE16A plug is required. • As with all high-voltage fan heaters, heating stops when the set target temperature is reached, while ventilation continues to run to protect against overheating.   usage examples Temperature regulation: construction sites, workshops, agriculture, apartments, garages, warehouses, cellars, sheds, garden sheds, laundry rooms and for use at work and for hobbies etc. Also ideal as a frost guard Drying: Ideal for faster drying of plaster, screed, etc. (Work can continue or be carried out very quickly) Damp rooms: Ideal for damp cellars, old walls and drying all damp objects Damage repair: After flooding, after damage caused by fire-fighting water or in the event of rot, these devices are ideal for supporting the drying process.     How much heat do I need?   Our free heat requirement calculator helps you determine the required heating output for your rooms. Click here to go to the online calculator: Calculate heat requirement     Technical data   Voltage: 380V - 400 V / 50Hz Power consumption: 2 levels 4.5 kW / max. 9 kW Fuse max.: 16 A Room thermostat: 0 - 45 °C Air volume flow: 660 m³/h Protection class: IP24 (Foreign body protection with ø > 12.5 mm + splash protection) Dimensions (H/W/D): 43 x 30 x 39 cm Weight: 9.7 kg Operating setting: rotary wheel Application area: up to max. 90 m² Plug: CEE 16 A Warranty: 2 years Series: WDH-BGP09 Special features: 1.15 m connection cable included

    CHF 169.00

  • Trotec TIH500S Infrarot - Heizplatte - ambiento.ch

    TROTEC Trotec TIH500S infrared heating plate

    These infrared panels are ideal for providing previously unheated rooms with an effective heat source or for generating heat in specific areas, such as at the workplace, on the sofa or in the bathroom. The gentle heat waves are absorbed by solid materials such as furniture or walls, but also by people, and provide a pleasant warmth. Very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors. While traditional heaters have to heat the entire room, heating panels can be used to specifically heat desired areas. This saves a lot of energy and therefore costs.   application examples   Heating of living spaces: Whether living area, conservatory or bathroom, as a local additional heating system, the infrared flat heater creates heat directly where the residents need it. It can be mounted on the wall to save space and only needs a standard socket for heating operation. Use in the catering industry: As a freestanding or wall-mounted device, the heating plate is the optimal solution for the targeted heating of sales stands or terrace areas and is much more effective than conventional gas heaters. Faster drying of wall surfaces: When drying out or renovating buildings, infrared heating of suitable wall building materials causes capillary moisture transport towards the heated wall surface due to the temperature gradient, which, in contrast to diffusion, can transport significantly more moisture out of the wall in a shorter time. In plain English: drying is faster when the damp wall is illuminated with infrared waves. Workplace heating: With the optionally available feet, the heater can be placed vertically or horizontally anywhere for targeted heating. Ideal for cool workplaces, for example in the warehouse, behind refrigerated counters, in workshops or in large halls     Advantages at a glance   • Efficient heating process with environmentally friendly IR-C radiation • Heat transport via light waves - direct object heating without convective loss • Maximum efficiency: 100% of the electrical energy used is converted into heat output • Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust turbulence • Integrated hanging device for mounting on wall or mounting supports • Can also be used as a stand-alone device (suitable stands are available from us as accessories) • Ready to use - no additional installations or expensive modifications required   The ErP table for this heater can be found above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of power requirements for rooms up to 2.5 m ceiling height insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² each additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows: Area of ​​the room in m² x W/m² = required heating output in watts. Calculation example: For a room size of 10 m² with very good insulation quality and two external walls (50 + 10 W/m²), the recommended power requirement is 10 m² x 60W/m² = 600 W.       Technical data   heating output 580W heating type infrared heat waves Suitable room temperature 0 - 60 °C heating surface 0.54 m² heating levels 1 voltage 220 - 240 V/50 Hz nominal current consumption max. 2.6 A power consumption max. 0.58 kW housing aluminum cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 905 x 605 x 22 mm (without feet) Weight 5 kg protection class IP54 overheating protection Yes Trotec article no. 1,410,003,012 guarantee 2 years

    CHF 169.00

  • Dryfix Eco15 Heizlüfter 15kW - ambiento.ch

    Dryfix Dryfix Eco15 fan heater 15kW

    The "Eco15" is a high-quality, yet affordable 15 kW fan heater for heating construction sites and industrial premises. It has a robust, stackable metal housing with rack. The device plug is located directly at the back of the housing (CEE32A). The connection cable itself is not included in the scope of delivery, but can be ordered inexpensively in various lengths and designs if required, e.g. acid-resistant PUR cables for construction sites or with plastic sheathing for private use. The function switch allows the device to be set to 5000 / 10000 or 15000W heating power or just as a fan. A room thermostat keeps the temperature at the set value. When the desired temperature is reached, the heating switches off while the fan continues to run to ensure constant air circulation in the room. These fan heaters are also suitable for unattended operation during the cold season, for example in garages, workshops, storage rooms, shops, greenhouses, sports and factory halls as well as for many other applications. Design of these fan heaters: - Robust metal housing - carrying handles - room thermostat - Safety thermostat, protects against overheating - Incl. CEE socket 5-pin 32 A (corresponds to the Swiss standard) warranty 2 years Shipping costs for 1 item: from Fr. 18.- (Based on B-Post, other shipping options can be found in the shopping cart).Technical data   Technical data Power: 15 kW 3 levels: 5 kW / 10 kW / 15 kW Air volume flow: 1550 m³/h Room thermostat: 4 – 40 °C Sound: 52 dB(A) Dimensions (HxWxD): 550x410x360 mm Weight: 14.5 kg Current consumption: 25 A max. Mains connection: 400 V / 50Hz Connection cable: not included Plug: CEE32A Protection class: IPX4

    CHF 189.00

  • Master B5EPB Heizlüfter 5kW - ambiento.ch

    Master Master B5EPB fan heater 5kW

    High-quality fan heater with 5kW heating output. Made in Italy - not Chinese goods. Robust metal housing with rack and side handles for good stability and easy transport. The function switch allows the device to be set to 1/2 or 1/1 heating power or just as a fan. A room thermostat keeps the temperature at the set value. When the desired temperature is reached, the heating switches off while the fan continues to run to ensure constant air circulation in the room. These fan heaters are ideal for heating construction sites, garages, workshops, storage rooms, shops or even private hobby rooms and many other applications.     What is the benefit of the automatic reset function?   If a fan heater in the control unit measures a temperature that is too high, an overheating protection is triggered. In this case, the ventilation runs, but the heating is interrupted. In cheaper models, this protection must be mechanically unlocked. This is normally done by pressing the release switch ("reset" switch) using a pointed object. In this heater, the protection is automatically unlocked as soon as the measured temperature in the control unit returns to the normal level. Since not all users are aware of this process, the automatic reset function is a great advantage in practice.   design of these heater fans • Robust metal housing, yellow powder-coated • stepless room thermostat • 2-stage adjustable heating output 2.5 kW / 5kW • No oxygen consumption • Odorless, no exhaust fumes, no condensation • Pure recirculation operation without heating possible • Comparatively quiet operating noise • Stainless steel heating elements • Overheat thermostat • Automatic reset in case of overheating of the control • Motor with thermal protection • CEE plug 5-pin 16 A on the back of the housing (corresponds to Swiss standard), no connection cable     How much heat do I need?   Our free heat requirement calculator helps you determine the required heating output for your rooms. Click here to go to the online calculator: Calculate heat requirement     Technical data   Heating power: 5 kW Levels: only recirculation / 2.5 kW / 5 kW Air volume: 510 m³ / h Room thermostat: continuously variable 5-35 °C Sound level: 49 dB(A) at 2.5 m distance Dimensions (H x W x D): 380 x 330 x 440 mm Weight: 6.4 kg Maximum input: 7.2 A Connection: 400V / 50Hz Cable / Plug: CEE16A, no cable Test certificates: CE Protection class: IP24 Warranty: 3 years

    CHF 189.00

  • WDH 210S Infrarot - Heizstrahler 2.1kW - ambiento.ch

    Aktobis WDH 210S infrared heater 2.1kW

    The 210S radiant heater is a powerful infrared heater with a stylish industrial look. It can be attached to the ceiling using the chain provided, similar to a lampshade, and thus provides warmth from above. It is ideal if, for example, a cozy table on the balcony or workstations in the basement, workshop or production halls need to be heated in specific areas. The heater has protection class IP54 - that means protection against splash water - and is therefore also suitable for outdoor use. The infrared heat is generated very quickly and is transmitted through heat waves, which keep people and objects warm. The heat is immediately noticeable, even in windy or draughty conditions, and is distributed downwards at an angle of 150°, which means that with a normal room height of around 2.5m, this means a radius of around 2-3 meters. Heater: The 210S is equipped with two powerful carbon heating tubes, which have a significantly lower glare effect than conventional heating tubes. The heating output can be selected in three levels: 900W / 1200W / 2100W. The heating intensity can be adjusted by pressing a button on the device itself, but also using the remote control included in delivery. The device is made almost entirely of metal and impresses with its very robust workmanship. Features & advantages over other heaters : • Equipped with two individual heating tubes • IP54 - suitable for indoor and outdoor use • Three heat settings 900 / 1200 / 2100 W (fits into normal household socket) • High-quality workmanship, mostly made of metal • Incl. remote control for selecting the heating level and for switching on/off • Heat transfer without a fan using infrared technology, provides warmth even in drafts. • Silent operation • Compliance with WEEE standards • “GS” tested and of course with CE and EMC conformity Examples of use: For keeping warm the workplace, terraces, balconies, winter gardens, restaurants, tents, pavilions, workshops, agriculture, garages, warehouses, cellars, sheds, gardens and for use at work and for hobbies etc. 2-year warranty Technical data Voltage: 220V-240V / 50Hz (normal household socket) Max. consumption: 2100 W Heating levels: 3 (900 W / 1200 W / 2000 W) Heating tubes: 2 carbon heating tubes Housing: metal, painted light grey Dimensions (H/W/D): 310 x 475 x 475 mm Protection class: IP54 (protected against dust in harmful quantities and against splash water) Weight: 3.5 kg

    CHF 195.00

  • Trotec IR2200 Infrarotstrahler - ambiento.ch

    TROTEC Trotec IR2200 infrared heater

    This heater is ideal for quickly warming up seats on terraces, in lounges, sports halls or conservatories, so that the cosy gathering is not abruptly ended by the cold. Thanks to its slim, attractive design, this heater is not only a source of heat, but also fits decoratively into the interior design.     Can be used as a wall and ceiling heater   A bracket supplied allows the heater to be attached horizontally or vertically to the wall or ceiling. The 45° swivel joint allows the heat rays to be precisely directed at seating or table areas. An easy-to-install rope system with a quick-screw connection is also included in the delivery. This allows the heater to be hung lower from the ceiling. The installation itself is easy with minimal manual skill.     feel-good atmosphere at the touch of a button   The pleasant infrared heat can be felt on the skin immediately after switching it on. To adjust the heat intensity, the radiator has two heat settings with 1100 watts or 2200 watts, which can be set at the touch of a button directly on the device or using the remote control provided. When mounted on the ceiling, the height is also crucial in determining how much the area below is warmed and how wide the heat rays spread. The lower the radiator, the warmer and smaller the illuminated area becomes. In lounges, a height of around 2.30 - 2.50m is considered comfortable.     Infrared heat: As pleasant and natural as the sun   Infrared heats the immediate environment based on the natural principle of the sun. Unlike devices with heating wires, infrared rays do not heat the ambient air, but only the surfaces and people they hit. The objects illuminated (e.g. furniture, walls and ceilings) absorb the heat and store it, then gradually release it again. The objects thus serve as additional energy and heat storage - even when the device is switched off, which further increases the efficiency. The heat radiation creates a pleasant feeling of warm sun rays on the skin in summer.   The strong heating level (2200 watts) covers an outdoor area of ​​approximately 9 m² (in cool environments) or a maximum of 15 m² in a slightly temperate, wind-protected environment.   Allergy sufferers and people with sensitive respiratory tracts in particular will find the benefits of infrared heaters soothing. In contrast to electric heaters, the clean and condensation-free instant heat is generated without stirring up dust, annoying noises and unpleasant smells.     Low Glare: 100% heat, 80% less light   Conventional infrared heaters often emit an intense orange-reddish light, which many people find warm and cozy, but sometimes also glaring. To ensure that the surroundings are not illuminated too brightly, this heater has two shortwave infrared tubes with light-reducing Low Glare technology. Advantages of Low Glare technology:   Romantic candlelight atmosphere: Low glare shortwaves produce a larger proportion of infrared light from the invisible light range. The infrared radiation is concentrated by an innovative coating process on the tubes, which reduces scattering losses. Overall, low glare heating tubes achieve a light reduction of up to 80% compared to conventional technology and have a service life of around 6000 hours.   Full heat output with less brightness: Since the perceptible light is significantly reduced, the immediate vicinity of the heater creates the impression of a cozy candlelight atmosphere and the ambience is noticeably more pleasant. An existing lighting concept on the terrace or in the restaurant is overall less affected.     Advantages at a glance   • Instant heat without preheating • Even and targeted heat distribution • Clean, condensation-free, odorless and noiseless • No dust turbulence, therefore suitable for allergy sufferers • 2 heat settings 1100W / 2200 Watt • Remote control • Elegant design • Weather-resistant aluminum-plastic housing • High-quality low glare shortwave infrared tubes – approx. 6000 hours of light with 80% less light • Adjustable 45° tilt angle – with large field of action • Can be used in the covered outdoor area • LED display • Operating indicator light • Suitable for wall and ceiling mounting • Energy efficient     information video about infrared heaters     Technical data   heating output max. 2200W on/off switch yes, step switch OFF - 1000W - 2000W heating type Short-wave infrared heat waves, low-glare tubes effective area 9 - 15 m² voltage 220 - 240 V/50 Hz nominal current consumption max. 9.5 A Recommended coverage 10 A cable length approx. 1.8 m Plug EU plug with Swiss fixed adapter Dimensions W x H x D 1039 x 78 x 78 mm Weight 2.5 kg protection class IP66 (dust and water jet protected) Recommended distance from flammable materials side/top 50cm, bottom 180cm) remote control yes (2 x AAA batteries 1.5V) LED display Yes parental controls no timer no Trotec article number: 1,410,003,215 guarantee 2 years

    CHF 195.00

Mobile Heizungen: Flexible Wärme für jeden Bedarf

Mobile Heizungen sind die ideale Lösung für Situationen, in denen schnelle und flexible Wärme benötigt wird. Ob bei Bauprojekten, Privat, Veranstaltungen oder in Notfällen – mobile Heizgeräte bieten eine zuverlässige Möglichkeit, Räume oder Aussenbereiche effektiv zu beheizen. Ihre Vielseitigkeit macht sie zu einem unverzichtbaren Helfer in verschiedenen Branchen und Szenarien.

Einsatzbereiche von mobilen Heizungen

  1. Baustellen: Mobile Heizungen sorgen für optimale Arbeitsbedingungen und schützen empfindliche Materialien vor Frost.
  2. Veranstaltungen: Egal ob Zeltveranstaltungen, Festivals oder private Feiern im Freien – sie schaffen eine angenehme Atmosphäre für Gäste.
  3. Notfälle: Bei Heizungsdefekten oder plötzlichem Kälteeinbruch bieten mobile Heizgeräte eine schnelle Übergangslösung.
  4. Industrie und Lagerhallen: Sie gewährleisten konstante Temperaturen in großen Räumen, selbst bei extremen Wetterbedingungen.

Vorteile mobiler Heizgeräte

  • Flexibilität: Dank ihrer Mobilität lassen sie sich schnell an den gewünschten Ort transportieren.
  • Vielfalt: Es gibt verschiedene Modelle, darunter Elektroheizungen, Ölheizer und Gasheizer, die auf unterschiedliche Bedürfnisse abgestimmt sind.
  • Einfache Bedienung: Die Geräte sind leicht zu installieren und zu bedienen, oft ohne spezielles Fachwissen.
  • Kosteneffizienz: Im Vergleich zu festen Heizsystemen können mobile Heizungen kostengünstiger sein, insbesondere für temporäre Einsätze.

Worauf sollte man achten?
Bei der Auswahl einer mobilen Heizung sind einige Faktoren entscheidend:

  1. Leistung: Die Heizleistung sollte auf die Größe des zu beheizenden Bereichs abgestimmt sein.
  2. Energiequelle: Abhängig von der Verfügbarkeit von Strom, Öl oder Gas sollte das passende Modell gewählt werden.
  3. Umweltfreundlichkeit: Moderne Geräte punkten durch energieeffiziente Technologien und reduzierte Emissionen.
  4. Sicherheitsmerkmale: Funktionen wie Überhitzungsschutz oder automatische Abschaltung erhöhen die Betriebssicherheit.

Fazit
Mobile Heizungen sind eine praktische und vielseitige Lösung, um in jeder Situation für die nötige Wärme zu sorgen. Mit der richtigen Auswahl und Anwendung bieten sie nicht nur Komfort, sondern auch Sicherheit und Effizienz. Ob für kurzfristige Einsätze oder langfristige Projekte – mobile Heizgeräte sind die Antwort auf flexible Wärmeanforderungen.

© 2024 ambiento.ch by eShoppen GmbH

    • American Express
    • Apple Pay
    • Google Pay
    • Maestro
    • Mastercard
    • PayPal
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account