The TVM 20 D floor fan quickly provides plenty of cooling when running quietly and is also a great visual appeal. Due to its striking design, the device is also called a drum fan and the matt black look of the rotor basket and stand is reminiscent of countless professional appearances of wind machines of this type in front of and behind the cameras of large photo and film studios. Also ideal for ventilation, wind generation, wind cooling or drying - the TVM 20 D is very versatile.   Made of metal and with attention to detail   Made entirely of robust metal right down to the last chrome-plated blade tip and equipped with a copper coil in the motor, the floor fan is designed for a particularly long service life. With a high air flow rate and a blade diameter of 20 inches (around 50 cm), the device blows even the hottest accumulated air out of living or office spaces. With 120 watts, it also has enough power reserves to provide sufficient cooling even when temperatures escalate. With its three speed settings, the TVM 20 D is ideal for any ventilation scenario: the control element on the back of the metal mesh basket can be used to set a gently cooling airflow or a stiff wind. The rotor basket can be tilted 360° continuously around its horizontal axis, so that the airflow always arrives exactly where it is needed.   Safe stand with small footprint   As a professional, the TVM 20 D floor fan requires little space and is a welcome sight everywhere - for example at a photo shoot, in a restaurant or with the practical wall and ceiling hanging at a party or concert. The device can also handle the odd bump without a problem - because three non-slip rubber feet attached to the underside of the stand ensure that the device stands securely. The carrying handle attached to the back also makes the fan particularly easy to handle for transport to different locations.   Here are some practical advantages at a glance: 120 watts of power 3 speed levels Adjustable tilt angle of the fan head by 360° Front and rear protected metal grill fan blade diameter 50 cm Stable and non-slip base for tip-proof stand Long service life thanks to the copper coil in the motor Smooth running Practical carrying handle Unique price-performance ratio Optionally available: Wall and ceiling mount for ventilation of hard-to-reach places

Read more less

This infrared measuring device uses infrared to determine the temperature of surfaces in a matter of seconds. The smartphone is used to control, store and evaluate the data.   The optical resolution is 10:1 with a temperature measuring range of -30 °C to +250 °C. The multi-point laser automatically visualizes the measuring spot size. The preset emissivity saves manual adjustments and covers a wide range of different materials. The measuring device is ready for use immediately, can be easily connected to the app and then displays all measured values ​​on the mobile device.   Compared to conventional pyrometers, users benefit from numerous additional advantages in terms of flexibility, analysis functions, data control and documentation thanks to the "Multimeasure Mobile" app, which are otherwise only found in much more expensive measuring devices. For example, there is the option of multi-coloured graphical representation of temperature curves or the temperature distribution on a wall in the form of a matrix measurement.   By using the app, additional functions and analysis options are available, such as an additional display of maximum, minimum or average values, for example the entry of individual limit values, which automatically trigger an acoustic alarm if they are exceeded or not reached.   Compare different temperature measurements of an object taken at different times directly in the app, or use the appSensor in conjunction with a parallel connected BC21WP thermohygrometer for differentiated dew point control.     functions • Minimum value display • Maximum value display • Average value display • Measured value hold function • Automatic switch-off after approx. 3 minutes without Bluetooth connection • Alarm function • Long-term measurement function • Multi-point laser aiming aid • non-contact measuring method • Diagram/matrix/table representation of the measurement data • Data export • Report function • Display selectable in °C or °F • Battery status indicator     Advantages at a glance   • Non-contact surface temperature measurement from -30 °C to +250 °C • Multipoint laser • Measuring optics 10:1 • Emissivity freely adjustable from 0.1 to 1.0 • High-quality sensors and numerous measuring functions • Intelligent combination of appSensor and the Multimeasure Mobile app • Automatic shutdown   What is an AppSensor?  Trotec appSensors are compact precision measuring devices with high-quality sensors that are designed to save energy and space and do not have any evaluation electronics or display units, as the operation and data evaluation of the devices are carried out almost entirely via the connected smartphone. In combination with the free "MultiMeasure Mobile" app, this measuring device concept offers many advantages. The app is available for IOS and Android.  app "Multimeasure Mobile" "MultiMeasure Mobile" offers you a variety of advantages: • Auto-detection for appSensors • Parallel operation of several appSensors • Fast and intuitive navigation • Measured value display numerically or as diagram / matrix • Integrated report function for on-site documentation • Organizer function for measurement data and documents • Customer management already integrated • Various analysis options directly in the app • Photo-linked measurement value storage • Matrix measurements, also photo-linked • Complete data synchronization to MultiMeasure Professional via Cloud  Your mobile device becomes a multifunctional measurement data manager. All appSensors are automatically recognized and can be connected to the app and read via Bluetooth. Operation is just as simple and intuitive as installation.       scope of delivery   • Measuring device • Battery(s) • Hand strap • Operating instructions     Technical data   max. 10 range in open area Optical resolution (D:S) 10:1 smallest measuring spot Ø 12.7 mm (distance 254 mm) measuring range -30 °C to +250 °C Spectral sensitivity 8 - 14 µm response time 0.3 sec environmental conditions     Temperature 0 °C to 50 °C Humidity 10 to 90% RH Storage -20 °C to °60°C, max. 80% rH laser class 2 (II) laser wavelength 630 - 670nm laser power 1 mW Bluetooth 4.0 Low Energy   2.4 GHz, 10 dBm transmission power Range approx. 10m in open area Weight 110 g energy supply batteries (3 x 1.5V, AAA) Dimensions (L x W x H) approx. 150 x 37 x 24 mm Weight 110 g protection class IP40 Trotec article no. 3,510,006,031 guarantee 2 years  

Read more less

With this high-quality laser scanner, you can check surfaces, such as interior walls and facades, for potential mold hazards caused by cold spots. You can quickly and easily measure wall surface temperatures contactlessly using infrared and at the same time automatically determine the dew point temperature value.   The backlit LCD display allows you to clearly and easily read the measured values ​​even in poor lighting conditions. The integrated 20:1 dual laser shows you the measuring spot on the respective measuring object.   To determine the dew point, the device also measures the current room temperature and the humidity of the air. Thanks to its acoustic and visual alarm function based on the traffic light principle and the integrated bar graph indicator, you have quick information, even with larger measuring areas, as to whether the dew point has been reached or fallen below at a measuring point and whether there is a risk of mold due to condensation. Since a long-term increase in relative humidity of around 70% is sufficient for mold to form on material surfaces, the device warns you both acoustically and visually a few degrees before the actual dew point is reached. It is therefore worth checking cold areas of the wall in order to detect condensation at an early stage.     With 20:1 optics, the measuring spot is always in view   Measure the surface temperature of walls, materials and objects without contact, i.e. without touching the object being measured. The device has a dual laser pointer to be able to estimate the exact area of ​​the measurement (measuring spot). This projects two laser points onto the surface to be measured, which precisely mark the diameter of the measuring spot. The temperature value in this area is recorded by an infrared sensor and an average value is determined. The following applies: the smaller the measuring spot, the more accurate the measurement, and the further the measuring device is from the measuring object, the larger the measuring spot diameter. Thanks to its geometric resolution of 20:1, the hand-held measuring device enables you to take accurate measurements even from a distance of several meters.     Detecting the danger of mold   Since the device has an air temperature sensor and a humidity sensor (measurement range from 0% to 100% relative humidity) in addition to the infrared surface temperature measurement, the dew point temperature is automatically calculated from these three values. In addition to the exact values, an acoustic signal and/or the color of the LCD display can indicate whether the measured values ​​are in the critical range.   Green display: everything is OK Orange display: measured values ​​are approaching the critical dew point value Red display: Temperature is dangerously close to the dew point or has already reached or fallen below it, so that condensation can form.   With the increasingly faster beeping sound signal, you can also work by ear if you wish. Especially when measuring large areas on walls, you can use the acoustic and/or optical alarm to quickly scan where critical areas are - without having to pay attention to the exact measured values. In addition, the bar graph indicator shown on the display offers quick orientation using an easy-to-understand bar diagram and shows you schematically on a scale from 0% to 100% how close the measured values ​​have already come to the dew point temperature.     Versatile   Due to the wide temperature measurement range from -50 °C to 260 °C, this measuring device is not only recommended for use as a dew point scanner but also for other applications. The contactless infrared measurement reliably protects you from surfaces that are too hot or too cold.   Whether it's a heating system, hot pipes, tanks, boilers, engine blocks, switch boxes or deep-freeze storage - measure the temperatures without burning your hands or "sticking" to ice-cold surfaces. This device can even be used for preparing baby food if you want to quickly check the correct drinking temperature of the bottle from the outside, for example.     With its compact dimensions, the device weighs just 163 g and can be easily carried in a jacket pocket. A practical pouch for attaching to a belt is also included in the delivery.   The infrared thermometer is operated wirelessly using the included 9 volt block battery. Thanks to the battery status indicator on the LCD display, you can always see the current charge level. The automatic switch-off when not in use saves energy - so you can carry out countless measurements!     Advantages at a glance   • Measurement of surface temperature, air temperature, humidity and dew point temperature with just one device • Dew point alarm indication by display color change, alarm tone and bar graph indicator • Non-contact surface temperature measurement via infrared from -50 °C to 260 °C • Measuring optics 20:1 • Measuring spot diameter display by dual laser pointer • Backlit display • Auto shutdown • Practice-optimized German industrial design – protected design • Optimal price-performance ratio   scope of delivery   • Measuring device • 9V battery • Operating instructions • Protective bag     Technical data   Optical resolution (D:S) 20:1 smallest measuring spot Ø 25.4 mm (distance 508 mm) measuring range sensor -50 to +260 °C Sensor deviation < 20 °C ± 3.5 Deviation sensor at 20 °C 1% ± 1.5 measuring range of integrated temperature sensor 0 to +50 °C dew point temperature -30 to +100 °C dew point deviation ±2.0% humidity measuring range 0 to +100 % RH humidity deviation ±3.5 % (between 20-80 % RH) response time temperature sensor < 150 ms Spectral sensitivity 8 - 14 µm energy supply 1 x 9 V block battery (included) Dimensions (H x W x L) 82 x 58 x 168 mm Weight 163 g Trotec article no. 3,510,003,035 guarantee 2 years

Read more less

The compact and handy pocket-sized pH meter is ideal for aquarium and plant lovers, but also for swimming pool owners. It is also suitable for professional applications, such as measuring pH values ​​during quality control in the food and beverage industry or for quick and reliable water control.   Natural ponds have become increasingly popular in recent years. They are usually in a natural balance and do not require the addition of chemical aids. However, regular checking of the pH value can help avoid surprises. Rain or filling with tap water can cause the pH value to shift into an acidic (pH < 7) or alkaline (pH > 7) environment. The tolerance range for fish is between pH 6.5 and 8.5. Ideally, the pH value of the pond water should be around pH 7 (neutral) and remain as stable as possible over time. Maintaining and regularly monitoring the correct pH value is also essential for swimming pools and private pools, especially if they are located outdoors. If the water becomes too acidic or too alkaline, this not only has a negative effect on the people swimming in it (burning eyes, itching). It also affects the formation of algae, the aging of the materials used in the pool (corrosion, decomposition of calcareous materials, porosity, etc.) and the effectiveness of the disinfectants added.   Thanks to the automatic temperature compensation and the use of auto-calibration, the measuring device allows the quick and precise determination of the pH value between pH 0 and pH 14 in the temperature measuring range from 0 to 50 ° C. The device already has a 3-point calibration at the factory, which can be carried out at any time later in just a few steps using the included pH buffer solution set. The result of the test can be found in the easy-to-read two-line display. The determined pH value is displayed (accurate to two decimal places) at the same time as the water temperature. A separate thermometer is therefore not necessary. The practical measuring device has an easily replaceable pH electrode. The electrode and the water temperature sensor are protected from damage by a removable protective cap. A convenient hold function makes it unnecessary to note down the last measured value. An automatic switch-off also reduces energy consumption of the four button batteries included in the delivery.     Advantages at a glance   • Two-line display for simultaneous display of pH value and water temperature • Automatic temperature compensation (ATC) for accurate measurements at different temperatures of the liquids to be tested • Factory 3-point calibration • Auto-calibration for pH 4.01/7.00/10.01 • Easily replaceable pH electrode • Automatic shutdown • Measured value hold function • Optimal price-performance ratio • Includes pH buffer solution set (4.01/7.00/10.01) and protective cap   Note: The device is calibrated at the factory using a high-percentage salt solution. In practice, this often leads to the formation of salt crystals on the diaphragm electrode (fiber bundle). The visible residues are completely normal for pH measuring electrodes of this type. They are harmless to the electrode, can be easily rinsed off with water and therefore do not represent a quality defect.     scope of delivery • Measuring device • Batteries • Operating instructions • pH buffer solution set (4.01/7.00/10.01) and protective cap     Technical data   voltage 4 x flat batteries LR44 display LCD PH value Measuring range: 0 - 14 pH Resolution: 0.01 pH Accuracy ±: 0.03 pH temperature Measuring range: 0 to 50 °C / 32 to 122 °F Accuracy: approx. ± 0.8 °C / ±1.5 °F Resolution: 0.1 °C / 0.1 °F ambient temperature 0°C to +50 °C humidity 10 - 85 % RH Dimensions L x W x H 188 x 38 x 38 mm Weight 83g protection class IP65 guarantee 2 years

Read more less

Thanks to the clear information and easy understanding, this thermohygrometer is perfect for quickly and easily monitoring a healthy living environment, such as living rooms and bedrooms, as well as offices, training rooms and meeting rooms.   Hair hygrometers like this one are considered to be particularly precise. They are equipped with a high-quality measuring mechanism 'Made in Germany', which enables a measurement accuracy of ± 3% RH in the range of 20 to 100% relative humidity. The measuring principle measures the change in length of a specially pre-treated synthetic fiber, which expands when moist and contracts when dry. The change in length is converted into a rotary movement and controls the pointer on the display. The hygrometer display can be easily corrected and calibrated by a zero point correction.     ventilation recommendations   Two scales with ventilation recommendations are visible on the display. During the cold season, the room humidity should not rise above 60%, while in summer a slightly higher humidity of up to 70% is considered normal in living areas. Cooler cellars, on the other hand, should not have more than 60% humidity all year round to prevent the formation of mold and odors. If the humidity remains above the recommended values ​​despite ventilation, the use of a dehumidifier should be considered.     hanging on the wall   This device is designed to be hung on a wall. For this purpose, a suitable hole for a nail or screw is incorporated into the housing on the back. To ensure that humidity and temperature values ​​are measured as precisely as possible, large air slots are installed on the sides. These allow the room air to pass through freely and thus ensure the best possible measurement. Please note that cold or poorly insulated external walls can distort the value. The optimal placement for reliable measurement values ​​is therefore on walls inside the building.     recalibration   After transport, the mechanical settings may be displaced by vibrations. Accuracy may also deteriorate if the thermohygrometer has been stored in a very dry environment for a long time. In this case, the humidity display can be easily corrected using the adjusting screw on the side with a small screwdriver. The temperature screw is accessible from the back of the housing (bottom hole). The easiest way to compare temperature and humidity is to use another thermohygrometer whose values ​​you consider to be reliable. When adjusting by hand, remember that warm, damp hands can change the displayed values, as can breathing.     Technical data   measuring range temperature 0 - 40 °C accuracy / resolution ± 2 °C humidity measuring range 0 - 100% accuracy / resolution ± 3 % RH Housing stainless steel measurement method synthetic hair Trotec article no. 3,510,205,012 guarantee 2 years

Read more less

This data logger measures the CO? air quality in rooms such as offices, classrooms or even in your own home. It has a large data memory for 50,000 measured values ​​for long-term recording of carbon dioxide concentrations, air temperature and humidity values ​​in freely definable measuring intervals from 1 second to 12 hours. It uses a CO? traffic light to show how the air quality is changing.   The recorded data can be easily transferred to the connected PC via a fast USB connection and then evaluated and logged using the analysis software included in the delivery. Thanks to the integrated Li-Ion battery, the CO? data logger can be used in mobile applications as well as in stationary tabletop use.   The simultaneous recording of humidity and temperature values ​​plus CO2 concentrations also provides property managers or landlords with optimal options for monitoring ventilation behavior.     Automatic Baseline Calibration   The CO? fresh air value expected today is around 400 ppm (0.04%vol). This is assumed by the device as the lowest limit (baseline). A special algorithm then permanently monitors the lowest CO? measured value determined by the sensor over several days. This takes place over a preconfigured time interval and slowly corrects any long-term drift detected compared to the expected fresh air value of 400 ppm (or 0.04%vol) CO?.   In normal indoor applications, the carbon dioxide level drops to almost the level of the outside air at some point over the course of a week. By recording the values ​​over a period of 8 days and then comparing the lowest value with the 400 ppm point, the measuring device recognizes whether it needs to adjust the zero point or not. This happens completely automatically. The algorithm thus takes advantage of the fact that the CO2 level in buildings/rooms regularly stabilizes at a minimum for a certain period of time when they are not occupied. In rooms that are permanently occupied or in which there is a constantly increased CO2 concentration (e.g. greenhouses), this principle of automatic adjustment does not work.     Advantages at a glance   • Accurate and long-term stable NDIR measurement of carbon dioxide concentrations in room air • Simultaneous display of CO? values, room temperature, humidity, date and time • Minimum and maximum value function for CO?, air temperature and humidity • Carbon dioxide alarm function with warning tone for freely definable limit values • Additional symbolic CO? indicator display comparable to a CO? traffic light • Large backlit display with easy-to-read measurement value display • Autonomous long-term logging of carbon dioxide concentration, room temperature and humidity • Memory for 50,000 measured values • Freely definable storage interval from 1 second to 12 hours • USB interface for measurement data transfer • For tabletop installation and mobile use • PC analysis software     scope of delivery • Measuring device • Battery(s) • Power supply • USB connection cable • PC software (download) • Operating instructions     Technical data   measuring range CO2 0 to 9999 ppm accuracy ±75 ppm / ±5 % resolution 1 ppm measuring range air temperature -5 °C to +50 °C resolution 0.1 °C accuracy ±1 °C humidity measuring range 0.01 % RH to 99.9 % RH resolution 0.1% RH accuracy ±5 % RH Advertisement LCD power supply 1 x 3.7 V Li-Ion battery or 230 V power supply sampling + storage interval > 1 s interface USB Weight 245 g Dimensions (L x W x H) 90 x 110 x 98 mm Trotec article no. 3,510,205,015 guarantee 2 years

Read more less

With the professional combination device, you can completely replace a comparable MultiQube tower with just one device when drying insulation layers. This with 20% more surface area, 50% lighter weight and 50% space saving! This also makes transport from the service vehicle to the damage site 100% faster. A multi-device installation with complex hoses is completely eliminated. Set up, connect, switch on - done!   No additional equipment technology is required because everything is already integrated and ready for connection: a powerful VX-5 turbine insulation layer dryer, a water separator, a 4-stage filter system and a powerful silencer - all ultra-compactly combined in a robust, stackable aluminum construction that offers you significantly more advantages than multi-device solutions and at the same time significantly lower costs.   Your employees will thank you too: 50% less carrying, lifting, dragging, stacking – 100% less piping, cabling, lashing – 20% less assembly.     Worldwide unique integral solution   • VX-5 turbine • Water separator WA 4i • HEPA filter module • Silencer NR 19 Everything is installed completely ready for connection – light, compact and powerful – in the world's only integral solution that is both economical and energetically convincing.     Advantages at a glance   • Replaces 4 devices: water separator, HEPA filter, silencer and all side channel compressors in the power classes from 0.4 kW to 3 kW • Up to 75% smaller than competitive designs • Up to 20% more area performance than a comparable MultiQube system • 50% less carrying, lifting, stacking • Faster and easier to install than any other system • Fully automatic, always the most effective drying performance thanks to HiDry automatic • Optiflow-NT multifunction display with plain text status display and performance control color lighting • Adaptronic power control for flexible vacuum surface drying from 10 m² to 85 m² • Digital counter for operating hours and energy consumption • DA-4 interface for real-time remote monitoring of system status and drying progress • Integrated thermal protection to prevent damage to drying equipment, inventory and building structure • Night operation whisper mode • Wear-free touch control panel • Additional HEPA filtration cost-effectively only when required • Total weight only 27 kg • High quality product, made in Germany     Small cause, big effect   Thanks to its ultra-compact design, this combination device enables you to achieve up to 100% more work productivity and up to 300% more storage productivity. All "practical time-wasters" can be eliminated in one fell swoop - so you benefit from extreme productivity increases in the day-to-day work of the repairer. Less equipment to be deployed and "moved" per damage, less storage required, more equipment per tour in the service vehicle, faster loading and unloading, faster transport from the vehicle to the damage site, faster installation, faster dismantling, less cleaning required.   The bottom line is that you can significantly increase your work and warehouse productivity.     touch control panel   Convenient operation at the touch of a finger. No controls, no wear and tear. A light press on the corresponding symbol is enough to configure the operation. In addition to the plus-minus buttons for quick power level selection, the control panel also includes functions for an extra whisper mode and a combined display of power consumption and operating hours.     Optiflow NT multifunction display   The current operating status and volume flow are easy to read on the display as a plain text display, even in the dark or from a distance. In addition, the color of the display lighting automatically shows how effectively the drying air can flow through the insulation layer in your installation. Green confirms optimal volume flow, orange indicates limit areas and a red LED indicates that the air flow is not sufficient for the area, so the setup needs to be optimized for quick drying.     night operation whisper mode   In whisper mode, the device works particularly quietly and yet efficiently. To reduce the noise level, the power is not simply reduced, but rather it is regulated with noise-optimized weighting to the optimum volume flow of power level 2. Once activated, the dryer operates in whisper mode for ten hours and then automatically switches back to the previously used power level. Extremely practical for customers who need a maximum of muted noise for a short time.     Sensor-supported thermal protection function   An integrated sensor monitors the internal air temperature. It automatically switches from the current level to level 1 before destructive climatic conditions above 45 °C are reached inside the device, which could lead to material stress and thus shorten the service life of the device.   The temperature continues to be monitored and if the temperature drops, the device automatically switches back to normal operation. However, if the temperature level remains critical for too long, the device will be switched off completely to protect itself.     TTKwic mode   The device has all the water separator features of the WA 4i, including two TTKwic quick couplings for easy drainage connection of dehumidifiers. To ensure that their condensate is reliably pumped out via the TTKwic quick couplings even when the device is switched off, you can switch the device to TTKwic mode via the control panel. The motor is off in this mode, but the pump is still active.     Turbo engine with adaptrically controlled power   The four-stage adjustable turbo motor reaches up to 20,000 rpm and guarantees maximum efficiency at every power level because the integrated HiDry automatic permanently records the current volume flow in m³/h and automatically regulates operation to the optimum air flow rate. A higher performance class or, if required, the extra whisper mode can also be selected at the touch of a button.     HiDry automatic   Fully automatic, always the most effective drying performance   Motor power generated in excess of requirements does not speed up drying, but increases wear and tear and power consumption. The key success factor for accelerated drying progress is not motor power, but a consistently high air flow in the insulation layer zones to be dried.   That's why the Qube+ is equipped with the innovative HiDry automatic control system, which adjusts the performance not depending on the resistance, but rather based on the volume flow, thus automatically guaranteeing the most effective performance at every stage for every drying setup.   Similar to a “cruise control” in a car, the sensor-supported HiDry automatic continuously and dynamically regulates the volume flow performance of the Qube+ to the preset optimum for the respective performance level. While at the beginning of the drying process, when resistance is still relatively high, more motor power is required to maintain the volume flow, the power requirement decreases continuously as the drying progresses. The HiDry automatic system ensures that the turbo motor of the Qube+ never generates more power than is necessary to maintain the optimum volume flow throughout the entire drying process. The result: the fastest possible drying with minimal energy consumption!     performance-optimized energy consumption   In contrast to conventional side channel compressor turbines, the performance and power consumption of the Qube+ turbo engine are always in a linear, direct relationship: If the power is reduced or the back pressure drops, the power consumption is also reduced. In addition, the power control is not resistance-oriented, but is geared towards the required volume flow.   Thanks to this technology, the Qube+ is extremely energy efficient compared to side channel compressors and, especially in the final drying phase, practically operates at the energy-saving eco tariff.   Always as much power as you need:   Power level 1: Ideal for economical drying of small areas. At this level, the Qube+ performs as well as a 0.4 kW side channel blower, but uses 70% less electricity! Performance level 2: Corresponds to the performance of a 0.8 kW side channel blower. Performance level 3: The Qube+ is approx. 10% more powerful than a side channel blower with 1.1 to 1.3 kW output. Performance level 4: Corresponds to 160% of the output of a 1.1 kW to 1.3 kW side channel blower and 95% of the output of a 3 kW side channel blower.   Stackable construction with telescopic push handle   The height-adjustable telescopic push handle can be extended and retracted at the push of a button. This allows the handle height to be adjusted to suit the user and retracted for space-saving storage. The motor cover is also equipped with a carrying handle and a practical cable holder. In addition, two stacking recesses ensure that stacked devices remain stable during transport or in storage.     Service-friendly design The Qube+ has an integrated service socket to which a condenser dryer or a drying control unit can be connected conveniently and quickly. The Qube+ also has a 50 mm threaded connection for process air extraction. This effectively reduces the critical heating of the room temperature to maintain the value of your drying equipment.     Flexible filter system For all applications that require HEPA filtration, the receiving sleeve of the G4 filter sleeve can be easily and quickly replaced with the HEPA filter module with combined F8 pre-filter sleeve. Whether changing the filter or cleaning, the maintenance-friendly design of the Qube+ allows you to work quickly and safely. The turbo motor, power connection and essential electrical components are completely housed in the motor cover, which can be removed in an instant thanks to the quick-release technology.   After removing the lid, the lower part of the Qube+ is completely power-free because there are no cable connections from the motor lid. This means you can start cleaning straight away without any additional safety measures.     DA-4 interface   The Qube+ comes standard with an interface for data exchange with our drying control unit DA 4 Qube. The connection of both units enables networking of all device data including real-time remote monitoring of system status and drying progress.     Accessories and consumables included in delivery   • Water separator bottom filter mat, 1 piece • G4 filter sleeve, 1 piece • F7-Z-Line filter for filtering the intake engine cooling air, 1 piece • 50 mm hose connection for process air discharge, 1 piece • Water drainage hose, length 5m, Ø 12mm     Our accessory tip: All-weather soundproof hood (Trotec SKU no.: 6100000070)   • Noise reduction of up to 5 dB(A) and additional modulation of high frequencies into quieter bass ranges • Easily washable and waterproof material • Ideal for continuous operation in residential environments • Ideal for outdoor installation, for example for flat roof drying • Quick to install and access thanks to double zipper system • Air inlets and outlets ensure optimum engine cooling free from heat pressure • Also for use with the Qube+ with attached drying control unit DA 4 Qube   (Made to order - the delivery time for this hoe is usually 7-10 working days)           information video application Qube+ Information video cleaning Qube+     Technical data   In negative pressure suitable for areas up to  Level 1: 25 m² Level 2: 50 m² Level 3: 85 m² Max. negative pressure 220 mbar air volume free blowing max. 250 m³/h HiDry volume flow rate (intake)   Whisper mode level 90 m³ / hour Level 1 90 m³ / hour Level 2 140 m³ / hour Level 3 160 m³ / hour Boost mode level 180 m³ / hour engine power 0.2 - 1.2 kW noise level at a distance of 3 m 48 - 62 dB(A) voltage 220 - 240 V/50 Hz nominal current consumption max. 6.7 A Recommended coverage 16 A cable + plug 3.5 m + EU plug with Swiss fixed adapter T12 Bucket 10 liters Dimensions H x W x D 735 x 500 x 490 mm Weight 25.2 kg hose connections for insulation drying 3 x Ø 38 mm TTKwic dehumidifier quick couplings 2 connection for process air extraction 50 mm service socket 1 x EU socket (Swiss plugs only fit 2-pin) electricity consumption meter yes, digital operating hour meter Yes control and monitoring DA-4 interface EfiDry humidity sensor connection overflow sensor with automatic shutdown Trotec article no. 1,560,000,055 guarantee 2 years

Read more less

This universal device tripod has a stable center brace with locking mechanism for secure positioning and is already supplied with a robust 3-way head including quick-release plate with a standard 1/4" connection for optimal alignment of the measuring device or camera.   The head can be folded to the side by up to 90 degrees, so that it can be used vertically or on inclined surfaces. Non-slip and flexible rubber feet help the user to adjust to different floor conditions. A quick-release clamp ensures quick and uncomplicated assembly.   The panoramic ball head makes almost any setting possible when it comes to steady camera positioning or precise measurements. By extending the telescopic rods, you can reach a comfortable working height of up to 150 cm. If necessary, the quick-release plate can be released with one hand when the situation requires it.   Trotec article no. 6.300.000.200

Read more less

Swiss version, suitable for three-pin 230V household sockets.     Quick and easy measurement of energy consumption   Which electrical appliance in the office or household consumes how much energy? With a minimum possible power display of 0.1 W, this measuring device can detect even the smallest energy wasters. This also makes it possible to detect standby consumption in devices, i.e. any consumption when the device is switched off.   The application is extremely simple: plug the measuring device into the socket and connect the power consumer to be checked. You can immediately see its current energy consumption, either as active power in watts, kWh, price or cost per kWh.   Use this measuring device to test your electrical devices, such as TV and HiFi systems, LCD TVs, amplifiers, DVD players, video recorders, computers, servers, refrigerators, freezers, washing machines, dryers, air conditioners, heaters, ceiling floodlights, floor lamps, background and shop window lighting, machines, and much more.     Advantages at a glance   • Quick and easy measurement of energy requirements • Power consumption display in watts, kWh or costs • Optimal price-performance ratio • Minimum possible current display 0.1 W • Buffer capacitor for storing the selected settings • Display of standby consumption from 0.1 W - this is not possible with many competing products • Display of the current power consumption of one or more devices • Display of the costs of energy consumed within a certain period of time (electricity price must be recorded once) • Connection of a multiple socket with several devices possible • Easy-to-read and easy-to-understand LCD display • Power failure protected • Swiss version - no conversion or adapter required     Technical data   measuring range total electricity consumption current consumption 0.1 - 9999 kWh 0.1 - 2300 Watt (max. 10A) accuracy ± 2% voltage / frequency 230V / 50-60 Hz (= household socket) Advertisement LCD memory yes, recording capacity 9999.9 hours measuring circuit category CAT II (2500V) Conformity / Safety EN 61010-1, EN 61326-1, pollution degree 2 protection class IP20 ambient temperature 5 - 40 °C ambient humidity max. 85% RH Dimensions (H x W x D) 95 x 51 x 70 mm Weight 100 g Trotec article no. 3510205916 guarantee 2 years

Read more less

environmentally conscious   The Trotec liquid descaler consists of organic acids that are 100% biodegradable.     active ingredient indicator   The striking pink color of the descaler is used to check the active ingredient. As soon as the color fades and starts to turn yellow, the liquid loses its descaling power.     Energy-saving   Limescale causes electronic devices to require up to 30% more power to achieve the same performance as a device without limescale. So clean your devices regularly to save energy. The Trotec liquid descaler can help you with this!     quality product   The 100% biodegradable liquid descaler from Trotec is a quality product 'Made in Germany'. It is made on an amidosulfonic acid basis and contains maleic acid to prevent re-calcification.     Universal descaler for household appliances   The descaler with color indicator is not only suitable for cleaning the coffee machine/fully automatic coffee machine, but also for all other household appliances with a water tank, such as air conditioners, humidifiers, kettles or steam irons.     Data   • Quality product, made in Germany • Natural and environmentally friendly - 100% biodegradable • Content: 1000 ml • Safety lock/child lock • Universally applicable: coffee machine, fully automatic coffee machine, espresso machine, air conditioners, humidifiers and much more. • Suitable for devices from all electrical appliance manufacturers • Mixing ratio: 0.5 litres of descaler for a 30 litre humidifier water tank.   For further information please refer to the descaling instructions provided by your appliance manufacturer.

Read more less

This color powder is easily visible without technical aids and is ideal for direct flow or connection control when detecting faulty or leaky connections and incorrect drainage systems.   The high-yield marking dye can be mixed in water as a color solution depending on the desired color intensity, since the Pure powder mixtures are completely free of maximum dosing limits due to their extreme environmental compatibility.   Further possible applications are in tracer hydrology, for example for flow path detection, for visualizing the mixing and discharge behavior in rivers, lakes, dams or water treatment plants, as well as for controlling the flow and flow velocity in fish ladders.   The Pure dye is also an ideal tool for simulated hazardous substance visualizations during fire department GSG exercises. Can be dosed as required for every need   Due to their 100% natural, food-grade ingredients, the dyes in the Pure series can be dosed as desired - overdosing is not possible. Depending on the desired intensity, 2 g of Pure dye can be added to every 1 to 5 liters of water, producing between 100 and 500 liters of dye solution with one Pure can.     Advantages at a glance   • 100% natural, food grade • hypoallergenic, vegan, kosher and halal • 100% biodegradable • Safe for humans and animals • No impact on water quality • No maximum dosage limits • Water-soluble powder - easy to use     composition   Radish, apple, black currant, citric acid and maltodextrin     Technical data   Dimensions (L x W x H) 70 x 70 x 165 mm Contents 200 g ingredients radish, apple and black currant, citric acid and maltodextrin scope of delivery 1 can Trotec article no. 3,510,012,051

Read more less

The steel measuring pins enable a solid connection with the test material and ensure reliable measurement results when measuring the moisture content of sawn and firewood or when determining the moisture content of soft building materials such as gypsum or plaster.   A bar scale and the additional direct display of the moisture volume in absolute percentages make it easier to read the moisture measurements; two different scale ranges for wood and building materials increase accuracy.   For wood moisture measurement, a calibration curve is stored in the device, which corresponds to the average of the wood types relevant in Europe based on a wood temperature of 20 °C. Therefore, no further settings are necessary for a quick indication of the wood moisture content.   It is not necessary to switch from wood moisture mode to building moisture mode, as the measured value is displayed using two parallel scale ranges for the respective material. A reference adapter is also integrated into the protective cap of the device to check the battery status and function. The measuring pins can be easily unscrewed and replaced if necessary.     Advantages for the practice • Wood moisture and material moisture measurement with one device • Double scale for wood moisture and material moisture • Includes protective cap with integrated test function • Ready to use • Display of the ambient temperature optionally in °C and °F • Calibration curves for common types of wood • With LED humidity indicator • Integrated LED flashlight • Easily replaceable steel measuring pins • Direct measurement value display in % • Automatic function and battery test • Practical pocket clip • Auto shutdown • Practice-optimized German industrial design - protected design     scope of delivery measuring device, operating instructions     Technical data   Measuring principle: resistance method Electrode length: approx. 8 mm Electrodes: integrated, replaceable Permissible ambient conditions: 0 to +40 °C / 0 to 85 % RH Power supply: 4 x 1.5 V AAA Dimensions (L x W x H): 155 x 34 x 52 mm Weight: 135 g   wood moisture Measuring range: 6 to 44% Accuracy: < 30 % approx. ± 2 % / ? 30 % approx. ± 4 %   building moisture Measuring range: approx. 0.2 to 2.0% Accuracy: < 1.4 % approx. ± 0.1 % / ? 1.4 % approx. ± 0.2 %   temperature Measuring range: 0 to 40 °C / 32 - 104 °F Accuracy: not specified   Trotec article no. 3510205025

Read more less

When drying insulation layers using negative pressure, the use of a class H13 particulate filter is highly recommended to protect against mineral fibre dust, mould and allergens in the air.   This two-part Multiqube filter consists of a robust, maintenance-friendly plastic housing and the filter element, which must be replaced after appropriate use. It was specially developed for use with Trotec water separators and compressors and is characterized by optimal filter performance and a high degree of separation. The filter class H13 according to DIN EN 1822-1 corresponds to a separation efficiency of nominally > 99.97% at 0.3 micrometer particle size. With 3 m² filter area and 315 m³/h nominal air throughput, the filter elements are optimally matched to the technical specifications of the vacuum turbines of Trotec compressors and offer performance reserves for combined use with up to two VE4S MultiQube or one VX5.     Optional filter class H14   For an even higher purity rate, a class H14 filter is optionally available (item no. 7.160.000.223) with a separation efficiency of > 99.995% at 0.2 micrometer particle size.     Hepacontrol   Contaminated filters not only pose a risk of contamination of the ambient air, they also have longer drying times and overheating of the compressor turbine. Compared to passive systems, this offers even more safety thanks to its innovative "Hepacontrol" status display. Active contamination protection: If the filter performance is too low due to a worn filter element, the warning light switches on automatically and clearly signals that the filter element needs to be replaced. Hepacontrol does not require an additional power connection, as the bright warning LED is powered by an integrated and particularly long-lasting high-performance battery.     More   No power connection required. The filter is integrated into the air flow of the rest of the drying system.     scope of delivery   complete with housing and a filter element     Technical data filter class H13 according to ISO 14644-1 air flow max. 315 m³/h number of hose connectors 4 x 38 mm (rubber adapter to 50 mm optionally available) Dimensions W x H x D 435 x 255 x 435 mm Weight 6.3 kg Trotec article no. 6,100,000,043 guarantee 2 years

Read more less

This room hygrostat is suitable for humidity-dependent control of the TTK170ECO or other dehumidifiers with a 6.35 mm jack socket for external connection, for example for unattended drying where a target humidity must not be undercut (for example with fresh plaster or plastering work) or for reducing power consumption when too low a humidity is not necessary.   The HG 110 has a 6.35 mm jack plug, works in the low voltage range and is designed for a maximum load of 2 A. The three-meter-long cable means that the measuring point does not have to be identical to the location of the dehumidifier.     application examples   It is used as a two-point controller to regulate the relative humidity, for example on indoor construction sites, in basements, in climate cabinets or for the controlled dehumidification of office and computer rooms. Other areas of application include the storage of goods or food, cold storage rooms for fruit and vegetables, greenhouses in horticultural companies, the textile industry, the paper and printing industry, the film industry and hospitals. This humidity controller can be used with the corresponding dehumidifier wherever humidity needs to be regulated or monitored.     Functionality and installation location   The installation location should be chosen so that a representative humidity measurement is guaranteed, ie the humidity readings at the installation location should correspond to those of the room and the hygrostat should be in the air flow. The room hygrostat reacts quickly and precisely to changes in humidity. By adjusting the setpoint knob, the lever system is intervened in such a way that the internal microswitch is activated when the set humidity is reached.     Technical data   measuring range 40 - 90 % relative humidity measurement accuracy +-3% suitable ambient temperature 0 - 60° C suitable ambient humidity 40 - 90% Tension 24 V max. switching load 2 A cable length 3 meters connector 6.35 mm jack plug 1/4" protection class IP20 guarantee 2 years

Read more less

With a power consumption of 2000 watts and flexible adjustment of hot air temperature and blower power, this hot air blower enables you to use it for a wide range of applications, from soldering, welding and tinning work to adhesive curing and paint removal, as well as film shrinking and paint drying.     Versatile configurable for a wide range of applications   To ensure that the heat is always controlled during use, the device has many convenient setting options. The hot air temperature can be preselected at the touch of a button between 50 °C and 650 °C in 10-degree increments. The air volume can also be regulated in 5 stages between 250 and 500 liters per minute. In this way, you can optimally configure the "Hystream" for every application.   The color LCD on the back is particularly practical. Not only does the display give you a clear overview of the current working values ​​for temperature and air volume, a color change also informs you when the preselected temperature value has been reached. Green signals the heating phase, red confirms that the target temperature has been reached - it's that simple.   It is just as easy to handle: the low weight of just 800 g makes it particularly pleasant to use for longer periods of time, and the ergonomic design of this hot air tool ensures comfortable working and a secure grip thanks to the pistol grip with soft grip and protective guard.     Practical functions for more comfort and safety   The hot air blower is electronically controlled and thus ensures a constant working temperature even in continuous operation - a must for particularly precise soldering and welding work. In addition, an overheating protection is integrated, which automatically switches off the heating element in the event of an overload, while the blower remains in operation.   In addition to the 60 hot air settings for high temperatures up to 650 °C, the "Hystream" also has a cold setting of 50 °C for rapid cooling of the material to be processed or for changing the attachment nozzle.   The cold setting also allows the heating coil to be cooled down quickly and in a particularly gentle manner before the device is put away again after use.   Thanks to the specially balanced weight distribution, this thermal tool can also be used without any problems in a stationary, tilt-proof position for hands-free work.   This means you can hold the workpiece with both hands, which is particularly practical when bending pipes. But the stand-alone operation is also an advantageous solution for longer soldering work and many other stationary applications.     All-rounder at professional level – special applications included   The nozzle set included in the standard delivery makes this hot air blower the optimal thermal tool for practically every task:   • A deflection nozzle protects heat-sensitive substrate materials from overheating by deflecting the heat beam. Ideal for removing old paint and putty from window frames or for restoration work.   • With the grill lighter nozzle, the charcoal is glowing and ready for grilling in just a few minutes.   • The reducing nozzle focuses the heat beam for more precise work, for example for removing paint in corners or for welding.   • And a wide-jet nozzle ensures a constant, even distribution of air, ideal for removing old paint over large areas or for evenly drying filler work.   When not in use, the hanging loop integrated in the cable offers you a helpful hanging option for quick access.     Advantages at a glance   • 2000 watt hot air blower • Ergonomic pistol design with soft grip and protective guard • Large, easy-to-read LCD display of the selected performance values • Display color changes when the desired temperature is reached • Air volume adjustable in 5 stages between 250 and 500 liters per minute • Temperature control from 50 °C to 650 °C in 10-degree increments • Safe operation through overheating protection • Hanging loop on the cable for storage • Thanks to balanced weight distribution, it is tilt-proof when standing and can be used for hands-free work • Nozzle set for many special applications already included in delivery • Cold setting for rapid temperature reduction • Fatigue-free working thanks to the low weight     Technical data   power connection 230V / 50 Hz cable / connector approx. 2 m, EU plug with Swiss fixed adapter air volume flow 250 - 500 liters/hour fan speeds 5 outlet temperature max. 650 °C Weight 800 g dimensions (W x H x D) 270 x 210 x 60 mm temperature regulation in 10 °C increments Trotec article no. 4,435,000,020 guarantee 2 years

Read more less

A reliable wall-mounted dehumidifier with an attractive design. A durable, corrosion-protected construction made of powder-coated, galvanized sheet steel ensures maximum reliability for this industrial condenser dryer and, thanks to its protectively painted heat exchanger, makes it particularly resistant to environmental influences.   The combination of high efficiency and low-maintenance design makes the dryer ideal for fully automatic, hygrostat-controlled continuous drying applications in numerous areas of application, and thanks to its autonomous recirculation mode it can also be easily integrated into any application environment at a later date. With its KTL-coated heat exchanger , it is also extremely resistant to environmental influences, even in particularly reactive air environments with high salt, chlorine or solvent content.     Hygrostat controlled and protected against manipulation   The built-in hygrostat automatically regulates the humidity to an optimal level at which condensation, mold or corrosion have no chance. The target humidity can be freely set according to your needs. The smooth-running AC axial fan and the powerful compression refrigeration system ensure high efficiency.   The dry air supplied to the room is simultaneously heated through a process, so that the use of conventional heating and ventilation energy can be reduced.   Thanks to the high-quality hot gas automatic system, the dryer only requires very short defrosting phases. This is ideal, especially when dehumidifying unheated rooms, as the performance level is improved and efficiency increased.   The controls on this industrial dryer are tamper-proof and protected from access by unauthorized persons, which also makes it the ideal dehumidifier in public buildings, staff and changing rooms or museums.       Diverse application possibilities   In wall operation, the device can be used for a wide variety of applications, for example:   • Humidity control in staff rooms, changing rooms, lounges and break rooms • Keeping changing rooms, fitness studios, bike and ski cellars dry • Constant humidity conditions in garages, workshops, test benches or production halls • Dehumidification in archives, collections or libraries • Dehumidification of water technology facilities and pumping stations to prevent condensation on pipes or pumps • Humidity regulation when storing natural products, for example for quality assurance in wood storage or when storing raw tobacco • Corrosion prevention in electrical control centers, boiler systems, turbines and pipe systems in power plants or during the storage of body shells and metal components • Humidity control in data centers, control rooms, etc. • Humidity control in the food industry, for example cheese or confectionery production   Due to the horizontally directed air flow and its compact design, the dehumidifier, which is delivered ready to plug in, is also particularly suitable for installation above door areas.   The condensate extracted from the air is drained directly via a downward-lying hose. If the water needs to be drained to higher areas, please also note our pump kits.     Advantages at a glance   • Professional quality, made in Germany • High dehumidification performance even at low temperatures • Corrosion-protected construction • Fully automatic operation • Professional hot gas automatic defrosting system • Quiet AC axial fan for horizontal air circulation • Ideal for installation above door areas • Control elements installed protected against unauthorized access • Optionally available with condensate pump     Technical data   dehumidification performance at 20 °C / 60 % RH at 30 °C / 80 % RH   11 liters / day 22 liters / day air volume max. 225 m³/ h Maximum room size 60 m² (150 m³) temperature range 5 - 40°C humidity range technically humidity range practice 30 - 90 % RH 40 - 90% RH (finned evaporator) voltage 220 - 240 V/50 Hz nominal current consumption max. 3.7 A power consumption max. 657W Recommended coverage 10 A Plug approx. 3.5m connection cable with EU plug and Swiss fixed adapter refrigerant R-407C (480g) GWP1774 hose connection   Direct hose connection, no bucket suitable hose 10mm inner diameter short hose piece included in delivery operating noise   53 dB(A) at 1 m distance 49 dB(A) at 3 m distance dimensions (W x H x D) 840 x 330 x 365 mm Weight 37 kg defrosting automatic hot gas automatic dehumidification mechanical hygrostat wheel, stepless fan axial, 1-stage fan prefilter Yes operating hour meter no continuous operation possible Yes display no memory function yes (set values ​​remain mechanically fixed) Trotec article no. 1,125,000,111 guarantee 2 years

Read more less

A reliable wall-mounted dehumidifier with considerable dehumidification power and an attractive design. A durable, corrosion-protected construction made of powder-coated, galvanized sheet steel ensures maximum reliability for this industrial condenser dryer and, thanks to its protectively painted heat exchanger, makes it particularly resistant to environmental influences.   The combination of high efficiency and low-maintenance design makes the dryer ideal for fully automatic, hygrostat-controlled continuous drying applications in numerous areas of application, and thanks to its autonomous recirculation mode it can also be easily integrated into any application environment at a later date. With its KTL-coated heat exchanger , it is also extremely resistant to environmental influences, even in particularly reactive air environments with high salt, chlorine or solvent content.     Hygrostat controlled and protected against manipulation   The built-in hygrostat automatically regulates the humidity to an optimal level at which condensation, mold or corrosion have no chance. The target humidity can be freely set according to your needs. The smooth-running AC axial fan and the powerful compression refrigeration system ensure high efficiency.   The dry air supplied to the room is simultaneously heated through a process, so that the use of conventional heating and ventilation energy can be reduced.   Thanks to the high-quality hot gas automatic system, the dryer only requires very short defrosting phases. This is ideal, especially when dehumidifying unheated rooms, as the performance level is improved and efficiency increased.   The controls on this industrial dryer are tamper-proof and protected from access by unauthorized persons, which also makes it the ideal dehumidifier in public buildings, staff and changing rooms or museums.     Diverse application possibilities   In wall operation, the device can be used for a wide variety of applications, for example:   • Humidity control in staff rooms, changing rooms, lounges and break rooms • Keeping changing rooms, fitness studios, bike and ski cellars dry • Constant humidity conditions in garages, workshops, test benches or production halls • Dehumidification in archives, collections or libraries • Dehumidification of water technology facilities and pumping stations to prevent condensation on pipes or pumps • Humidity regulation when storing natural products, for example for quality assurance in wood storage or when storing raw tobacco • Corrosion prevention in electrical control centers, boiler systems, turbines and pipe systems in power plants or during the storage of body shells and metal components • Humidity control in data centers, control rooms, etc. • Humidity control in the food industry, for example cheese or confectionery production   Due to the horizontally directed air flow and its compact design, the dehumidifier, which is delivered ready to plug in, is also particularly suitable for installation above door areas.   The condensate extracted from the air is drained directly via a downward-lying hose. If the water needs to be drained to higher areas, please also note our pump kits.     Advantages at a glance   • Professional quality, made in Germany • High dehumidification performance even at low temperatures • Corrosion-protected construction • Fully automatic operation • Professional hot gas automatic defrosting system • Quiet AC axial fan for horizontal air circulation • Ideal for installation above door areas • Control elements installed protected against unauthorized access • Optionally available with condensate pump     Technical data   dehumidification performance at 20 °C / 60 % RH at 30 °C / 80 % RH   20 liters / day 46 liters / day air volume max. 635 m³/ h Maximum room size 130 m² (325 m³) temperature range 5 - 40°C humidity range technically humidity range practice 30 - 90 % RH 40 - 90% RH (finned evaporator) voltage 220 - 240 V/50 Hz nominal current consumption max. 4.2 A power consumption max. 922W Recommended coverage 16 A Plug approx. 3.5m connection cable with EU plug and Swiss fixed adapter refrigerant R-407C (500g) GWP1774 hose connection   Direct hose connection, no bucket suitable hose 10mm inner diameter short hose piece included in delivery operating noise   56 dB(A) at 1 m distance 52 dB(A) at 3 m distance dimensions (W x H x D) 790 x 651 x 255 mm Weight 47 kg defrosting automatic hot gas automatic dehumidification mechanical hygrostat wheel, stepless fan axial, 1-stage fan prefilter Yes operating hour meter no continuous operation possible Yes display no memory function yes (set values ​​remain mechanically fixed) Trotec article no. 1,125,000,116 guarantee 2 years

Read more less

Good heating performance with small space requirements   This matt black infrared heater is compact in shape and size. It is suitable for quickly heating balconies, terraces, trade fair and market stands, outdoor events, seating and standing areas in outdoor restaurants and similar areas that require little space. Whether in the cold winter, in spring when temperatures are still cool or on unexpectedly cool summer nights - this heater with digital display and remote control enriches outdoor areas all year round with pleasant summer temperatures without taking up much space.     Easy operation   The lightweight heater is easy to use and offers maximum functionality and heat intensity. It floods 8 - 14 m² areas with targeted, instant heat, either at the touch of a button on the device itself or via remote control. In contrast to conventional halogen heating tubes, the high-quality carbon infrared tube emits 80 percent less red light, but more pleasant infrared heat. The expected lifespan of this tube is around 10,000 operating hours.     Can be used as a wall or ceiling heater   As a wall and ceiling heater, the heater warms seating groups, standing tables and outdoor lounge areas with odorless heat without any preheating time. For easy installation of the carbon heater, a bracket that can be swiveled by 45°, including screws and dowels, is included in the delivery. The approx. 1.80 m long cable can be used to reach nearby sockets.     pleasant warmth   The pleasant infrared heat of the infrared heater can be felt on the skin immediately after switching it on. To adjust the heat intensity as required, the device has four heating levels with 800 watts, 1200 watts, 1600 watts and 2000 watts of heat output, which can be selected via the integrated control panel or the remote control provided.     Plannable heat outdoors   The heater has a practical 24-hour timer for energy-saving programming of a predefined operating time. Once set, the heater switches off automatically after a predefined number of hours (1-24 hours). This reduces unnecessary operating costs and makes it particularly easy to use in commercial applications.     Safe and Weatherproof   For maximum safety, the infrared heater has a self-triggering overheating protection. If the maximum permissible operating temperature of the heater is exceeded, a safety thermostat switches operation off fully automatically. Another plus point - especially for professional use in the catering industry - is the designer aluminum housing constructed to protection class IP55, which means that the jet-proof infrared heater reliably withstands wind and rain.     Infrared heat: As pleasant as the sun   The radiator heats its immediate surroundings using the natural principle of the sun. Unlike devices with heating wires, the infrared rays do not heat the surrounding air, but only the surfaces and people they hit. The objects illuminated (e.g. furniture, walls and ceilings) absorb the heat and store it, then gradually release it again. The objects thus serve as additional energy and heat storage - even when the device is switched off, which further increases the efficiency. The heat radiation creates a pleasant feeling of warm sun rays on the skin in summer.   Everyone perceives temperatures differently. Our individual perception of heat is influenced, for example, by the distance from the heat source. The closer the distance to the heater, the smaller the area illuminated - the greater the distance to the heater, the larger the area illuminated. The 2000 watt carbon tube is recommended for outdoor areas of around 8 m² in cold environments or 14 m² in slightly temperate environments.     No disturbing emissions   In contrast to electric heaters, the clean and condensation-free instant heat is generated without dust turbulence, annoying noises and unpleasant smells.     Low Glare: 100% heat, 80% less light   Conventional infrared heaters without low glare technology often emit an intense orange-reddish light along with the heat radiation, which many people find warm and cozy. However, to ensure that the surroundings are not illuminated too brightly or even disturbed, the IR 2005 from Trotec has a carbon infrared tube with light-reducing low glare technology.   Advantages of Low Glare Technology Romantic candlelight atmosphere: Low glare shortwaves produce a larger proportion of infrared light from the invisible light range - and do so without reducing the heating output. In addition, the infrared radiation is concentrated using an innovative coating process on the tubes, which reduces scattering losses. Overall, Trotec carbon heaters with low glare technology therefore achieve a brightness reduction of up to 80% with an expected service life of around 10,000 hours.   Full heat output with less brightness: Since the perceptible light is significantly reduced, the immediate vicinity of the heater creates the impression of a cozy candlelight atmosphere and the ambience is noticeably more pleasant. An existing lighting concept on the terrace or in the restaurant is overall less affected.   Note: Low glare carbon heating tubes look just as intensely reddish as conventional infrared heaters without low glare. In reality, however, they emit 80% less visible light. With the same heat output - for more comfort and romance.     Advantages at a glance   infrared heat without preheating • Four heat settings, up to 2000 watts of heat output • High-quality carbon infrared tube – approx. 10,000 hours of light with 80% light reduction • Even and targeted heat distribution • Clean, condensation-free, odorless and completely noise-free • No dust turbulence, therefore suitable for allergy sufferers • Protection class IP55 – jet-proof professional device • 24-hour timer for fully automatic shutdown • LED display • Robust aluminum housing • Adjustable 45° tilt angle – with large field of action • Suitable for wall and ceiling mounting • Infrared remote control • Integrated hanging device • Energy efficient         Technical data   heating output 2000W heating levels 800 / 1200 / 1600 / 2000W heating type infrared heat waves heating tube Carbon, Low Glare effective area max. 14 m² voltage 220 - 240 V/50 Hz nominal current consumption max. 8.6 A power consumption max. 2000W Recommended coverage 10 A cable length approx. 1.8 m Plug EU plug with Swiss fixed adapter Dimensions W x H x D 900 x 175 x 105 mm Weight 3 kg protection class IP55 on/off switch Yes overheating protection Yes display no frost guard function no parental controls no timer yes, 1-24 hours Housing aluminum remote control Yes tripod optionally available Trotec article no. 1,410,003,208 guarantee 2 years

Read more less

This heater is ideal for quickly warming up seats on terraces, in lounges, sports halls or conservatories, so that the cosy gathering is not abruptly ended by the cold. Thanks to its slim, attractive design, this heater is not only a source of heat, but also fits decoratively into the interior design.     Can be used as a wall and ceiling heater   A bracket supplied allows the heater to be attached horizontally or vertically to the wall or ceiling. The 45° swivel joint allows the heat rays to be precisely directed at seating or table areas. An easy-to-install rope system with a quick-screw connection is also included in the delivery. This allows the heater to be hung lower from the ceiling. The installation itself is easy with minimal manual skill.     feel-good atmosphere at the touch of a button   The pleasant infrared heat can be felt on the skin immediately after switching it on. To adjust the heat intensity, the radiator has two heat settings with 1100 watts or 2200 watts, which can be set at the touch of a button directly on the device or using the remote control provided. When mounted on the ceiling, the height is also crucial in determining how much the area below is warmed and how wide the heat rays spread. The lower the radiator, the warmer and smaller the illuminated area becomes. In lounges, a height of around 2.30 - 2.50m is considered comfortable.     Infrared heat: As pleasant and natural as the sun   Infrared heats the immediate environment based on the natural principle of the sun. Unlike devices with heating wires, infrared rays do not heat the ambient air, but only the surfaces and people they hit. The objects illuminated (e.g. furniture, walls and ceilings) absorb the heat and store it, then gradually release it again. The objects thus serve as additional energy and heat storage - even when the device is switched off, which further increases the efficiency. The heat radiation creates a pleasant feeling of warm sun rays on the skin in summer.   The strong heating level (2200 watts) covers an outdoor area of ​​approximately 9 m² (in cool environments) or a maximum of 15 m² in a slightly temperate, wind-protected environment.   Allergy sufferers and people with sensitive respiratory tracts in particular will find the benefits of infrared heaters soothing. In contrast to electric heaters, the clean and condensation-free instant heat is generated without stirring up dust, annoying noises and unpleasant smells.     Low Glare: 100% heat, 80% less light   Conventional infrared heaters often emit an intense orange-reddish light, which many people find warm and cozy, but sometimes also glaring. To ensure that the surroundings are not illuminated too brightly, this heater has two shortwave infrared tubes with light-reducing Low Glare technology. Advantages of Low Glare technology:   Romantic candlelight atmosphere: Low glare shortwaves produce a larger proportion of infrared light from the invisible light range. The infrared radiation is concentrated by an innovative coating process on the tubes, which reduces scattering losses. Overall, low glare heating tubes achieve a light reduction of up to 80% compared to conventional technology and have a service life of around 6000 hours.   Full heat output with less brightness: Since the perceptible light is significantly reduced, the immediate vicinity of the heater creates the impression of a cozy candlelight atmosphere and the ambience is noticeably more pleasant. An existing lighting concept on the terrace or in the restaurant is overall less affected.     Advantages at a glance   • Instant heat without preheating • Even and targeted heat distribution • Clean, condensation-free, odorless and noiseless • No dust turbulence, therefore suitable for allergy sufferers • 2 heat settings 1100W / 2200 Watt • Remote control • Elegant design • Weather-resistant aluminum-plastic housing • High-quality low glare shortwave infrared tubes – approx. 6000 hours of light with 80% less light • Adjustable 45° tilt angle – with large field of action • Can be used in the covered outdoor area • LED display • Operating indicator light • Suitable for wall and ceiling mounting • Energy efficient     information video about infrared heaters     Technical data   heating output max. 2200W on/off switch yes, step switch OFF - 1000W - 2000W heating type Short-wave infrared heat waves, low-glare tubes effective area 9 - 15 m² voltage 220 - 240 V/50 Hz nominal current consumption max. 9.5 A Recommended coverage 10 A cable length approx. 1.8 m Plug EU plug with Swiss fixed adapter Dimensions W x H x D 1039 x 78 x 78 mm Weight 2.5 kg protection class IP66 (dust and water jet protected) Recommended distance from flammable materials side/top 50cm, bottom 180cm) remote control yes (2 x AAA batteries 1.5V) LED display Yes parental controls no timer no Trotec article number: 1,410,003,215 guarantee 2 years

Read more less