This high-quality air hose is ideal for conveying gaseous media in areas where static charge must be avoided, e.g. duct ventilation and de-aeration, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards.   Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to wider spiral spacing. The AP hoses are therefore ideal for installation on the exhaust side of fans.     Advantages at a glance   • Temperature range: -20 °C to +100 °C • made of antistatic, PVC-coated polyamide fabric • robust with highly flexible • good compressibility • with abrasion protection and integrated steel spiral • spiral-free sleeves on both sides • Spiral spacing 150 mm • Standard length 7.6 m • Bending radius 0.5 x ø     We recommend that you only use the SP series air transport hoses in combination with the corresponding connecting pieces.   Trotec article no. 6.100.001.425

Read more less

This high-quality air hose is ideal for conveying gaseous media in areas where static charge must be avoided, e.g. duct ventilation and de-aeration, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards.   Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to wider spiral spacing. The AP hoses are therefore ideal for installation on the exhaust side of fans.     Advantages at a glance   • Temperature range: -20 °C to +100 °C • made of antistatic, PVC-coated polyamide fabric • robust with highly flexible • good compressibility • with abrasion protection and integrated steel spiral • spiral-free sleeves on both sides • Spiral spacing 150 mm • Standard length 7.6 m • Bending radius 0.5 x ø     We recommend that you only use the SP series air transport hoses in combination with the corresponding connecting pieces.   Trotec article no. 6.100.001.430

Read more less

This high-strength air hose is ideal for conveying gaseous media in areas where static charge must be avoided, e.g. duct ventilation and de-aeration, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards.   Compared to the antistatic hoses of type SP-AP, the SP-AV hoses also have greater strength due to shorter spiral spacing. This enables installation on the suction side of blowers even at high suction pressure.     Advantages at a glance   • Temperature range: -20 °C to +100 °C • made of antistatic, PVC-coated polyamide fabric • extra robust with high strength • specially designed for suction-side connection at high suction pressure • with abrasion protection and integrated steel spiral • spiral-free sleeves on both sides • Spiral spacing 50 mm • Standard length 7.6 m     We recommend that you only use the SP series air transport hoses in combination with the corresponding connecting pieces.   Trotec article no. 6.100.001.460

Read more less

This high-strength air hose is ideal for conveying gaseous media in areas where static charge must be avoided, e.g. duct ventilation and de-aeration, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards.   Compared to the antistatic hoses of type SP-AP, the SP-AV hoses also have greater strength due to shorter spiral spacing. This enables installation on the suction side of blowers even at high suction pressure.     Advantages at a glance   • Temperature range: -20 °C to +100 °C • made of antistatic, PVC-coated polyamide fabric • extra robust with high strength • specially designed for suction-side connection at high suction pressure • with abrasion protection and integrated steel spiral • spiral-free sleeves on both sides • Spiral spacing 50 mm • Standard length 7.6 m     We recommend that you only use the SP series air transport hoses in combination with the corresponding connecting pieces.   Trotec article no. 6.100.001.470

Read more less

This high-strength air hose is ideal for conveying gaseous media in areas where static charge must be avoided, e.g. duct ventilation and de-aeration, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards.   Compared to the antistatic hoses of type SP-AP, the SP-AV hoses also have greater strength due to shorter spiral spacing. This enables installation on the suction side of blowers even at high suction pressure.     Advantages at a glance   • Temperature range: -20 °C to +100 °C • made of antistatic, PVC-coated polyamide fabric • extra robust with high strength • specially designed for suction-side connection at high suction pressure • with abrasion protection and integrated steel spiral • spiral-free sleeves on both sides • Spiral spacing 50 mm • Standard length 7.6 m     We recommend that you only use the SP series air transport hoses in combination with the corresponding connecting pieces.   Trotec article no. 6.100.001.475

Read more less

This high-strength air hose is ideal for conveying gaseous media in areas where static charge must be avoided, e.g. duct ventilation and de-aeration, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards.   Compared to the antistatic hoses of type SP-AP, the SP-AV hoses also have greater strength due to shorter spiral spacing. This enables installation on the suction side of blowers even at high suction pressure.     Advantages at a glance   • Temperature range: -20 °C to +100 °C • made of antistatic, PVC-coated polyamide fabric • extra robust with high strength • specially designed for suction-side connection at high suction pressure • with abrasion protection and integrated steel spiral • spiral-free sleeves on both sides • Spiral spacing 50 mm • Standard length 7.6 m     We recommend that you only use the SP series air transport hoses in combination with the corresponding connecting pieces.   Trotec article no. 6.100.001.480

Read more less

These easy-to-install aluminum feet fit the smaller heating plates of the TIH-S series (300S/400S).  The aluminum feet are designed so that when the heater is installed along a wall, it maintains the optimal distance from the wall to ensure air circulation and the efficiency of the panel. Which models do these feet fit? The frame of the heating plates is the same thickness on all TIH-S models. As such, these feet fit all sizes. However, for better stability, we recommend the slightly larger, black feet from TIH500S and higher.     product details   • Material: anodized aluminum • Can be used in any room • Easy installation • Maintenance-free • Can be used for the heating plates TIH 300 S and TIH 400 S • Scope of delivery: 1 pair (=2 pieces)   Trotec article no. 1.410.003.001

Read more less

We recommend these stable feet for professional installation of the infrared panels of the TIH-S series. They guarantee a robust stand, especially for the wider models from TIH500S to TIH1100S. They are inserted into the side of the panels and fixed on both sides with four screws each.   The feet are designed in such a way that when the heater is installed along a wall, it maintains the optimal distance from the wall to ensure air circulation and the efficiency of the panel.       product details   • Material: anodized aluminum, black powder-coated • Can be used in any room • Easy installation • Maintenance-free • Can be used for all TIH-S series heating plates • Scope of delivery: 1 pair (=2 pieces)   Trotec article no. 1.410.003.099

Read more less

The practical telescopic probe makes this precision anemometer from the MultiMeasure Professional series a versatile measuring instrument for determining flow, temperature and volume flow.   For measurements in channels or at remote locations, the probe can be continuously extended up to a usable length of one meter. The combination of a robust hot wire sensor and highly developed microprocessor technology for signal processing guarantees fast and precise measurement results for every requirement, which are clearly displayed on the illuminated dual display of the easy-to-read LC display even in poorly lit environments.     application examples     • Testing of heating systems, ventilation ducts or air conditioning systems • Adjustment of the air flow when using multiple devices • Commissioning • Maintenance tasks • Measurement of air velocity and temperature at air outlets and ventilation slots • Certification of critical environments • Channel measurements • Leak tests on windows or doors     Advantages at a glance   • Measurement of air velocity (in m/s, mph, km/h, kn, ft/min) and air volume flow (m³/min, ft³/min) • Slim telescopic probe - continuously extendable up to 1 m in length - enables measurements even in hard-to-reach places • Large, easy-to-read LCD with backlight and dual measurement display • Point-by-point and temporal averaging • Minimum, maximum and hold function • Delivery including calibration certificate      Optional   First, read the data stored in the device, such as images, Excel tables or graphics, using the software included in the delivery. Now transfer the results using copy and paste into one of the ready-made report templates in the MultiMeasure Studio PRO software (download MultiMeasure Studio STD), which you can use to create professional measurement reports easily and in no time at all. The text modules (currently only available in the German version) and sample reports included can be edited as required and can also be put together at any time to create new templates defined by the user.     scope of delivery   • Measuring device • evaluation software • Operating instructions   Technical data   air flow measurement measuring range accuracy resolution measuring principle   measuring air volume measuring range   measuring air temperature measuring range accuracy resolution   0.1 to 25 m/s ± 5% of the measured value + 1 measuring unit 0.01 m/s hot wire     0.001 - 999,000 m³/min or ft³/min     0 °C to +50 °C ± 1 °C 0.1 °C   display LCD interfaces USB energy supply 9V block battery ambient temperature 0 °C to +50 °C Dimensions L x W x H 210 x 75 x 50 mm Weight 280 g tripod thread yes, 1/4 inch Automatic shutdown Yes Trotec article no. 3,510,205,042 guarantee 2 years  

Read more less

Comfortable warmth   When the days get colder in the transition period to autumn/winter, but the stationary heating system is still switched off for cost reasons, the ultra-flat design convector TCH 1510 E with its continuously adjustable heating output of 1500 watts via thermostat provides pleasant, odorless and noiseless warmth for well-tempered rooms - regardless of whether you use it as a wall-mounted or free-standing unit.     Stylishly styled   A large, highly efficient aluminum heating element measuring approximately 55 cm in length and aerodynamically shaped air outlets on the top of the device ensure rapid heat distribution in rooms up to 20 m² or 50 m³. Whether in a modern living environment, in an office environment, in the bathroom or in unheated conservatories, garages or holiday homes: wherever quick and/or additional heat is required, the design convector shows its power. It has protection class IP24 (splash-proof) and is therefore also approved for use in damp rooms. When installing in bathrooms, please ensure that there is sufficient distance to water.     Uniform convection heat   In the TCH series convectors, the air in the device is heated by electrically heated wires and rises as warm air, creating a natural suction that draws cold air into the device. This creates a constant circulation of warm air throughout the room, flowing into every corner. The heat spreads evenly throughout, preventing individual areas from being overheated or underheated. As soon as the preset heat level is reached, the device reduces the power and maintains the desired temperature.     Innovative window open detection prevents energy waste   Regular ventilation is essential for a good and healthy living environment. To ensure that no unnecessary energy is wasted during ventilation, the device has an energy-saving window open detection system. If the window is opened, the convector reduces the heating output in thermostat-controlled automatic mode until the window is closed again. Automatic temperature control of the room temperature and intelligent heating automation further reduce the already economical energy consumption. When the preset desired temperature is reached (between 0 and 50 °C), the heating element switches off fully automatically and only switches on again when additional heating is required. This means that the energy consumption of the convector remains pleasingly low and no expensive energy costs are thrown out the window.     Smart equipment for warm, comfortable times   The comfort features of the designer convector are rounded off by a room temperature and time display, two operating modes (automatic and weekly mode), stable feet for flexible use in different locations, a wall bracket, an operating hour display and an extra-long power cable for maximum freedom of movement.     Cozy, warm interiors with comfort   This heater works with the effect of uniform convection heat and, like this, it can be used almost anywhere in the private home or office: for example, as emergency heating when the main heating fails, as reliable transitional heating before the start of the heating season or for heating conservatories, garages, hobby rooms or basement areas that are not connected to a central heating system.     Operating hours display – keeps an eye on consumption   Whether you are a tenant or a landlord, it is sometimes helpful to know how much heating costs have been incurred in a certain period of time. With the practical operating hours display, you can monitor and log consumption down to the hour.     Weekly mode – individual heating times and temperatures every day   Every day is different. We usually spend more time at home at the weekend and the need for heat is correspondingly greater. A programmable weekly timer allows you to program individual heating times and room temperatures for each day of the week.   More heat at the weekend and less heat during the week when you leave the house in the morning: In weekly mode, individual room temperatures and heating times can be assigned to each day of the week. Very practical.     Child safety lock – for safe operation in the children's room   The child lock protects the convector's settings from curious children. Once activated, the device settings can no longer be changed via the control panel.     frost guard function   Ideal for short-term vacancies or rooms that are not used all the time. With the stepless thermal control, you can also use the devices in the frost guard mode. The heater is then automatically activated by a thermostat to keep the rooms frost-free or to prevent them from cooling down too much. As frost guards, the TCH convectors are not only ideal for landlords or property companies - they also provide private individuals or business people with a practical function for keeping empty rooms or garages frost-free. Rooms, conservatories or cellars that are not connected to a central heating system can be reliably kept warm in this way.     Advantages at a glance   • Up to 1500 W heating output for clean, condensation-free and odorless heat • Large heating element of approx. 55 cm length • Temperature range adjustable between 0-50 C° • Stepless thermal control • Innovative window open detection • Automatic temperature control / Intelligent heat automation • Frost guard function • Energy-efficient operation thanks to automatic shutdown when target value is reached • Current room temperature display • Timer function • Weekly timer • Operating hours display • LCD display • Child safety lock • Overheating protection • Can be used as a wall or floor-standing device • Frost guard function   Please note • The ErP table for this heater can be found in the "Documents" section • The device is only suitable for use in well-insulated rooms or for occasional use. • The selectable temperature does not always correspond to what can be achieved technically. The larger the room and the lower the basic temperature in the room, the less high temperature targets can be achieved. For example, in a well-insulated room of 15 - 20 m², temperature targets of a comfortable 20 - 25°C should be possible without any problems, but the maximum adjustable target of 50°C is not realistic with 1500 watts of power.     Technical data   heating output 1500W heating type convention Maximum room size 20 m² (50 m³) temperature range 0 - 50 °C voltage 220 - 240 V/50 Hz nominal current consumption max. 6.5 A power consumption max. 1500W Recommended coverage 10 A cable length approx. 1.8 m Plug EU plug with Swiss adapter Dimensions W x H x D 690 x 480 x 260 mm (including feet) Weight 6 kg protection class IP24 on/off switch Yes thermostat control Yes LCD display Yes frost guard function Yes Auto-shutdown at target value Yes parental controls Yes timer yes (one-time, weekly timer, weekday timer) anti-tip device Yes open window detection Yes guarantee 2 years

Read more less

Small parking heater with convection and fan   This mobile flat radiator brings energy-efficient heat and contemporary design to rooms and work areas that are rarely used or are not connected to the central heating system. The visually appealing convector impresses with its modern product design, clear shapes and ease of use. Switch it on, set the temperature and immediately enjoy pleasant convection heat. An intelligent heating system regulates the room temperature fully automatically and thus reduces power consumption as much as possible.     Intelligent thermostat control   A two-stage heating element with selectable heating output of 1000 or 2000W enables the rapid heating of rooms up to a size of 24 m² or 60 m³ - for example as an additional heater in living rooms or bedrooms or as a quick heater for heating hobby rooms and cellars or even as an emergency heater if a central heating system fails.   The integrated thermostat control, which automatically regulates the interior temperature to the desired target value, is as practical as it is energy-saving. The desired temperature level is conveniently and continuously set using a rotary thermostat on the side. Intelligent temperature sensors continuously monitor the room temperature and regulate the heating output to the desired temperature. If the target temperature is reached, the electrically operated heating element switches off until the room needs to be reheated. This saves electricity costs and makes the use of the heater more economical.     Quickly reach pleasant comfort temperatures   On cold days, you want to get warm as quickly as possible. That's why the convector has a switchable turbo fan in both heating levels for accelerated air circulation and warm air distribution.     Comfortably warm room temperatures thanks to convection   This device works with the effect of uniform convection heat. The room air is heated by electrically heated wires and rises as warm air. This creates a natural suction that draws cold room air into the device. This creates a constant circulation of warm air throughout the room, flowing into every corner. The heat spreads evenly everywhere, thus optimally preventing over- or underheating of individual areas. As soon as the preset heat level is reached, the device switches off and only switches on again when the room needs to be reheated to reach the target value again. The result is a comfortable warmth that fills the room - which is 100% clean, condensation-free and odorless thanks to the electric heating element.     Clean, comfortable warmth for   • Living spaces • Bedroom • Home office • Winter gardens • Hobby rooms • Holiday homes • Workshops • Garages • basement rooms   There are good reasons for or against using a convector with a turbo fan. If a room needs to be heated up in the shortest possible time, the strong fan setting is recommended so that the heat spreads through the room as quickly as possible. Operation without the ventilation switched on is noiseless; with the ventilation switched on, the noise of the fan is quiet or slightly louder depending on the setting. In quiet bedrooms, pure convection heat without the ventilation switched on is more pleasant.     Advantages for the practice   • Up to 2000 W heating output for clean, condensation-free and odorless heat • 2 heating levels (1000 W / 2000 W) • Turbo blower for faster air circulation • Stepless thermal control • Thermostat-controlled automatic operation • Frost guard function • Energy-efficient operation thanks to automatic shutdown when target value is reached • Maximum safety thanks to overheating and tipping protection • Silent heating (when the fan is not in operation) • Stable stand thanks to large adjustable feet • Integrated handle for easy transport   frost guard function   Ideal for short-term vacancies or rooms that are not constantly used. With the stepless thermal control of our mobile TCH convectors, you can also use the devices in the frost guard mode. The thermostat then automatically activates the heater to keep the rooms frost-free or to prevent them from cooling down too much. As frost guards, the TCH convectors are not only ideal for landlords or real estate companies - they also provide private individuals or business people with a practical function for keeping empty rooms or garages frost-free. Rooms, conservatories or cellars that are not connected to a central heating system can be reliably kept warm in this way.     Please note • The ERP table for this heater can be found in the "Documents" section • The device is only suitable for use in well-insulated rooms or for occasional use.       Technical data   heating output 1000 / 2000W heating type convection and fan Maximum room size 24 m² (60 m³) temperature range 0 - 40 °C voltage 220 - 240 V/50 Hz nominal current consumption max. 8 A power consumption max. 2000W Recommended coverage 10 A cable length approx. 1.7 m Plug EU plug with Swiss adapter Dimensions W x H x D 530 x 378 x 172 mm (including feet) Weight 3 kg protection class IPX0 on/off switch yes, step switch OFF - 1000W - 2000W thermostat control Yes LCD display no frost guard function Yes Auto-shutdown at target value Yes parental controls no timer no, operation with timer possible anti-tip device Yes operating noise without fan operating noise with fan noiselessly max. 50 dB(A) at 1m distance, 47 dB(A) at 2.5m distance guarantee 2 years  

Read more less

Your turbo for heat or coolness in the entire room   This 2-in-1 fan heater is elegantly designed and equipped with innovative turbo spin technology. The all-rounder combines a pleasant feel-good climate in its modern design housing: a powerful fan heater and a low-noise fan. If you previously needed two separate devices to avoid sweating in the summer and to enjoy cozy, warm evenings at home in the winter, you can save money and space with the multifunctional 2-in-1 device.     Additional heating in winter, fan in summer   On cold days in winter or in the transitional period, when it is not warm enough in your own four walls, in the office or in your holiday home, the Turbospin technology provides cozy warmth and quick and even heat distribution. The power can be set to either 1200W or 2000W. Where conventional electric heaters often do not blow the heat far enough into the room, this fan creates more uniform room temperatures through a circulating air flow.   In addition to its electric heating function, it also has a turbine-powered ventilation mode with two manually selectable speed levels, so that you can always keep a cool head even on hot summer days. The fan's powerful air flow cools noticeably more freshly, as it circulates more than twice as much room air as a conventional fan with the same power without turbo spin technology. The fact that it runs very smoothly and is astonishingly quiet is another comfort plus.     How Turbospin technology works   In apartments with high ceilings, drafty areas or narrow rooms, the warm heating air often does not reach every part of the room, so that unpleasantly cold areas often remain. The cause of these temperature fluctuations in the room is insufficient air circulation. The warm heating air does not even reach the floor, but rises to the ceiling, cools down there and the further away from the radiator the room temperature also drops. The warm air is not distributed throughout the room.   The solution is called Turbospin: With its Turbospin technology, the device generates a more even air circulation throughout the room. The air is sucked into the fan from the back. There it hits the 5 particularly strongly curved rotor blades of the extremely fast-rotating impeller. These deeply curved fan blades ensure particularly powerful turbulence and enormous acceleration of the air flow. The spiral-shaped protective grille of the fan further forces the turbulence. The now strongly compressed air flow shoots out of the device as a rotating column of air and penetrates deep into the room. Cold and warm air zones in the room are broken through and mixed by the air flow. The escaping air flow hits the opposite wall or corner of the room and is reflected there on all sides. The air flows in constant circulation back to the back of the fan via the side walls and ceiling. There it is sucked in again and the cycle starts again. This effective turbo spin principle ensures that the air in your room is mixed and circulated to the maximum. The difference between the cooler floor temperature and the warmer ceiling temperature is significantly reduced and instead you feel a more even temperature throughout the room.   Isn't a conventional fan or heater enough? Many standard fans or heaters don't achieve the described air circulation effect with the same intensity. Their field of action is smaller due to the process, so you have to stay closer to the device to feel the desired heating or cooling. The turbo power of this model, on the other hand, is much stronger and is in a different league.     Cooling and heating – the right room climate for every season   Heating in winter: On cold days, the Turbospin technology ensures faster and more even room heating. In two-story maisonette apartments, which need to be heated more in winter due to their larger areas and stairs, the device can, depending on the installation and room size, improve air circulation to allow the heat to reach everywhere. Use the device as an additional heater with heating function, or as a fan, for example to distribute the cozy warmth of a fireplace in the room.   Cooling in summer: In the warm summer, the two-stage fan with its two cold settings provides pleasant cooling. The fresh breeze can be felt quickly in the room thanks to the strong air flow. Tip: Position the fan in the bedroom in front of the open window and blow the pent-up heat out of the room in no time early in the morning or in the evening. The fresh air in all areas of the room ensures a restful sleep.   Cooling turbo: This device is also ideal for supporting an air conditioning system. The fan distributes the cooled air over a large area of ​​the room, thereby increasing the cooling effect of the air conditioning unit.   Fresh air in autumn and winter: During the dry heating season, the apartment should be well aired at least once a day. Fresh air contributes to a greater sense of well-being and protects against colds. Blow the stale and dry heating air out of the window in no time.   Energy saving tip: Cold feet or noticeably cooler spots in the room are generally not the result of heating being set too low. Even poorly placed furniture or seating groups can lead to the warm air not being distributed optimally in the room. Therefore, increasing the room temperature rarely achieves the desired result - but instead leads to higher energy costs! This device can be used to increase the efficiency of permanently installed heaters or air conditioning systems. The heated or cooled air can be distributed more quickly and completely in the room through clever positioning, so that less additional heating or cooling is required.     Design, comfort and safety perfectly combined   The fan impresses with its clear aesthetics and a design that is based on the shape of a high-performance turbine. And with the transport handle embedded on the back, the device, which weighs just 2 kg, can always be set up exactly where you like it best.   The safety is also impressive: it's good to know that the robust cool-touch plastic housing does not heat up even at the highest heat setting. The internal heating elements do not transfer their heat energy to the casing or to the front or rear grille. This means that you can touch the fan heater without worry even after it has been heating for a long time. The integrated tilt switch protects against accidental tipping over. The heating coil is automatically switched off as soon as the otherwise stable device threatens to tip over. The fan also switches off automatically shortly afterwards. At the same time, a beep sounds to signal that the fan is no longer in an upright position. In addition, it has overheating protection and a fan run-on mode that blows the remaining accumulated heat out of the device after heating. Better safe than sorry.   Quieter than you'd expect: The powerful Turbospin technology is surprisingly quiet when in operation. The pleasantly soft, sonorous background noise of the escaping air flow is easy to ignore. This means you can enjoy either warmth or cooling in the bedroom or while watching TV, for example, without being distracted by loud background noises.   Automatic thermostat control: The temperature can be preselected in 3-degree increments from 18 °C to 30 °C on the clearly designed control panel. Once set, the automatic thermostat takes over temperature control. When the desired target temperature is reached, the heater switches off until reheating is required. This is not only convenient, but also reduces energy consumption.     Advantages for the practice   • 2-in-1 combination device: heater and fan • Up to 2000 watts of heating power for quick and pleasant warmth • Optimal heat circulation through Turbospin technology – thus wide distribution of warm air • Can be used flexibly in summer and winter months • Particularly quiet • Fan function with 2 cold settings • 2 heating levels (1200 W/2000 W) • Temperature control from 18 °C to 30 °C • Automatic shutdown when the set temperature is reached • Cool-touch housing – the external plastic parts do not heat up • Overheating protection • Anti-tilt switch integrated in the device • Fan run-on function • LED display • Operating indicator light • Secure footing • Energy efficient   Please note • The ERP table for this heater can be found in the "Documents" section • The device is only suitable for use in well-insulated rooms or for occasional use.          Technical data   204.51 m3 277.28 m3 /h /h heating output 1200 / 2000W heating type fan with switchable heating Maximum room size 24 m² (60 m³) Adjustable temperature 18 - 21 - 24 - 27 - 30 °C Suitable ambient temperature 0 - 35 °C voltage 220 - 240 V/50 Hz nominal current consumption max. 8.7 A power consumption max. 2000W Recommended coverage 10 A cable length approx. 1.60 m Plug EU plug with Swiss adapter Dimensions W x H x D 255 x 250 x 185 mm Weight 2 kg protection class II on/off switch Yes thermostat control Yes LED display Yes frost guard function no Auto-shutdown at target value Yes parental controls no timer no oscillation no anti-tip device Yes operating noise at a distance of 1 m Operating noise at 2.5m distance max. 53 dB(A) strong ventilation level max. 50 dB(A) strong ventilation level fan speeds 2 air volume level 1 air volume level 2 204 m³ / h 277 m³ / h guarantee 2 years

Read more less

These infrared panels are ideal for providing previously unheated rooms with an effective heat source or for generating heat in specific areas, such as at the workplace, on the sofa or in the bathroom. The gentle heat waves are absorbed by solid materials such as furniture or walls, but also by people, and provide a pleasant warmth. Very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors. While traditional heaters have to heat the entire room, heating panels can be used to specifically heat desired areas. This saves a lot of energy and therefore costs.   application examples   Heating of living spaces: Whether living area, conservatory or bathroom, as a local additional heating system, the infrared flat heater creates heat directly where the residents need it. It can be mounted on the wall to save space and only needs a standard socket for heating operation. Use in the catering industry: As a freestanding or wall-mounted device, the heating plate is the optimal solution for the targeted heating of sales stands or terrace areas and is much more effective than conventional gas heaters. Faster drying of wall surfaces: When drying out or renovating buildings, infrared heating of suitable wall building materials causes capillary moisture transport towards the heated wall surface due to the temperature gradient, which, in contrast to diffusion, can transport significantly more moisture out of the wall in a shorter time. In plain English: drying is faster when the damp wall is illuminated with infrared waves. Workplace heating: With the optionally available feet, the heater can be placed vertically or horizontally anywhere for targeted heating. Ideal for cool workplaces, for example in the warehouse, behind refrigerated counters, in workshops or in large halls     Advantages at a glance   • Efficient heating process with environmentally friendly IR-C radiation • Heat transport via light waves - direct object heating without convective loss • Maximum efficiency: 100% of the electrical energy used is converted into heat output • Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust turbulence • Integrated hanging device for mounting on wall or mounting supports • Can also be used as a stand-alone device (suitable stands are available from us as accessories) • Ready to use - no additional installations or expensive modifications required   The ErP table for this heater can be found above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of power requirements for rooms up to 2.5 m ceiling height insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² each additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows: Area of ​​the room in m² x W/m² = required heating output in watts. Calculation example: For a room size of 10 m² with very good insulation quality and two external walls (50 + 10 W/m²), the recommended power requirement is 10 m² x 60W/m² = 600 W.       Technical data   heating output 1100W heating type infrared heat waves Suitable room temperature 0 - 60 °C heating surface 1.09 m² heating levels 1 voltage 220 - 240 V/50 Hz nominal current consumption max. 4.8 A power consumption max. 1.1 kW housing aluminum cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 905 x 22 mm (without feet) Weight 9 kg protection class IP54 overheating protection Yes Trotec article no. 1,410,003,018 guarantee 2 years

Read more less

These infrared panels are ideal for providing previously unheated rooms with an effective heat source or for generating heat in specific areas, such as at the workplace, on the sofa or in the bathroom. The gentle heat waves are absorbed by solid materials such as furniture or walls, but also by people, and provide a pleasant warmth. Very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors. While traditional heaters have to heat the entire room, heating panels can be used to specifically heat desired areas. This saves a lot of energy and therefore costs.   application examples   Heating of living spaces: Whether living area, conservatory or bathroom, as a local additional heating system, the infrared flat heater creates heat directly where the residents need it. It can be mounted on the wall to save space and only needs a standard socket for heating operation. Use in the catering industry: As a freestanding or wall-mounted device, the heating plate is the optimal solution for the targeted heating of sales stands or terrace areas and is much more effective than conventional gas heaters. Faster drying of wall surfaces: When drying out or renovating buildings, infrared heating of suitable wall building materials causes capillary moisture transport towards the heated wall surface due to the temperature gradient, which, in contrast to diffusion, can transport significantly more moisture out of the wall in a shorter time. In plain English: drying is faster when the damp wall is illuminated with infrared waves. Workplace heating: With the optionally available feet, the heater can be placed vertically or horizontally anywhere for targeted heating. Ideal for cool workplaces, for example in the warehouse, behind refrigerated counters, in workshops or in large halls     Advantages at a glance   • Efficient heating process with environmentally friendly IR-C radiation • Heat transport via light waves - direct object heating without convective loss • Maximum efficiency: 100% of the electrical energy used is converted into heat output • Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust turbulence • Integrated hanging device for mounting on wall or mounting supports • Can also be used as a stand-alone device (suitable stands are available from us as accessories) • Ready to use - no additional installations or expensive modifications required   The ErP table for this heater can be found above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of power requirements for rooms up to 2.5 m ceiling height insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² each additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows: Area of ​​the room in m² x W/m² = required heating output in watts. Calculation example: For a room size of 10 m² with very good insulation quality and two external walls (50 + 10 W/m²), the recommended power requirement is 10 m² x 60W/m² = 600 W.       Technical data   heating output 450W heating type infrared heat waves Suitable room temperature 0 - 60 °C heating surface 0.43 m² heating levels 1 voltage 220 - 240 V/50 Hz nominal current consumption max. 2 A power consumption max. 0.45 kW housing aluminum cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 705 x 605 x 22 mm (without feet) Weight 4 kg protection class IP54 overheating protection Yes Trotec article no. 1,410,003,010 guarantee 2 years

Read more less

These infrared panels are ideal for providing previously unheated rooms with an effective heat source or for generating heat in specific areas, such as at the workplace, on the sofa or in the bathroom. The gentle heat waves are absorbed by solid materials such as furniture or walls, but also by people, and provide a pleasant warmth. Very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors. While traditional heaters have to heat the entire room, heating panels can be used to specifically heat desired areas. This saves a lot of energy and therefore costs.   application examples   Heating of living spaces: Whether living area, conservatory or bathroom, as a local additional heating system, the infrared flat heater creates heat directly where the residents need it. It can be mounted on the wall to save space and only needs a standard socket for heating operation. Use in the catering industry: As a freestanding or wall-mounted device, the heating plate is the optimal solution for the targeted heating of sales stands or terrace areas and is much more effective than conventional gas heaters. Faster drying of wall surfaces: When drying out or renovating buildings, infrared heating of suitable wall building materials causes capillary moisture transport towards the heated wall surface due to the temperature gradient, which, in contrast to diffusion, can transport significantly more moisture out of the wall in a shorter time. In plain English: drying is faster when the damp wall is illuminated with infrared waves. Workplace heating: With the optionally available feet, the heater can be placed vertically or horizontally anywhere for targeted heating. Ideal for cool workplaces, for example in the warehouse, behind refrigerated counters, in workshops or in large halls     Advantages at a glance   • Efficient heating process with environmentally friendly IR-C radiation • Heat transport via light waves - direct object heating without convective loss • Maximum efficiency: 100% of the electrical energy used is converted into heat output • Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust turbulence • Integrated hanging device for mounting on wall or mounting supports • Can also be used as a stand-alone device (suitable stands are available from us as accessories) • Ready to use - no additional installations or expensive modifications required   The ErP table for this heater can be found above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of power requirements for rooms up to 2.5 m ceiling height insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² each additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows: Area of ​​the room in m² x W/m² = required heating output in watts. Calculation example: For a room size of 10 m² with very good insulation quality and two external walls (50 + 10 W/m²), the recommended power requirement is 10 m² x 60W/m² = 600 W.       Technical data   heating output 580W heating type infrared heat waves Suitable room temperature 0 - 60 °C heating surface 0.54 m² heating levels 1 voltage 220 - 240 V/50 Hz nominal current consumption max. 2.6 A power consumption max. 0.58 kW housing aluminum cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 905 x 605 x 22 mm (without feet) Weight 5 kg protection class IP54 overheating protection Yes Trotec article no. 1,410,003,012 guarantee 2 years

Read more less

These infrared panels are ideal for providing previously unheated rooms with an effective heat source or for generating heat in specific areas, such as at the workplace, on the sofa or in the bathroom. The gentle heat waves are absorbed by solid materials such as furniture or walls, but also by people, and provide a pleasant warmth. Very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors. While traditional heaters have to heat the entire room, heating panels can be used to specifically heat desired areas. This saves a lot of energy and therefore costs.   application examples   Heating of living spaces: Whether living area, conservatory or bathroom, as a local additional heating system, the infrared flat heater creates heat directly where the residents need it. It can be mounted on the wall to save space and only needs a standard socket for heating operation. Use in the catering industry: As a freestanding or wall-mounted device, the heating plate is the optimal solution for the targeted heating of sales stands or terrace areas and is much more effective than conventional gas heaters. Faster drying of wall surfaces: When drying out or renovating buildings, infrared heating of suitable wall building materials causes capillary moisture transport towards the heated wall surface due to the temperature gradient, which, in contrast to diffusion, can transport significantly more moisture out of the wall in a shorter time. In plain English: drying is faster when the damp wall is illuminated with infrared waves. Workplace heating: With the optionally available feet, the heater can be placed vertically or horizontally anywhere for targeted heating. Ideal for cool workplaces, for example in the warehouse, behind refrigerated counters, in workshops or in large halls     Advantages at a glance   • Efficient heating process with environmentally friendly IR-C radiation • Heat transport via light waves - direct object heating without convective loss • Maximum efficiency: 100% of the electrical energy used is converted into heat output • Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust turbulence • Integrated hanging device for mounting on wall or mounting supports • Can also be used as a stand-alone device (suitable stands are available from us as accessories) • Ready to use - no additional installations or expensive modifications required   The ErP table for this heater can be found above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of power requirements for rooms up to 2.5 m ceiling height insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² each additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows: Area of ​​the room in m² x W/m² = required heating output in watts. Calculation example: For a room size of 10 m² with very good insulation quality and two external walls (50 + 10 W/m²), the recommended power requirement is 10 m² x 60W/m² = 600 W.       Technical data   heating output 700W heating type infrared heat waves Suitable room temperature 0 - 60 °C heating surface 0.72 m² heating levels 1 voltage 220 - 240 V/50 Hz nominal current consumption max. 3.2 A power consumption max. 0.70 kW housing aluminum cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 605 x 22 mm (without feet) Weight 6 kg protection class IP54 overheating protection Yes Trotec article no. 1,410,003,014 guarantee 2 years

Read more less

These infrared panels are ideal for providing previously unheated rooms with an effective heat source or for generating heat in specific areas, such as at the workplace, on the sofa or in the bathroom. The gentle heat waves are absorbed by solid materials such as furniture or walls, but also by people, and provide a pleasant warmth. Very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors. While traditional heaters have to heat the entire room, heating panels can be used to specifically heat desired areas. This saves a lot of energy and therefore costs.   application examples   Heating of living spaces: Whether living area, conservatory or bathroom, as a local additional heating system, the infrared flat heater creates heat directly where the residents need it. It can be mounted on the wall to save space and only needs a standard socket for heating operation. Use in the catering industry: As a freestanding or wall-mounted device, the heating plate is the optimal solution for the targeted heating of sales stands or terrace areas and is much more effective than conventional gas heaters. Faster drying of wall surfaces: When drying out or renovating buildings, infrared heating of suitable wall building materials causes capillary moisture transport towards the heated wall surface due to the temperature gradient, which, in contrast to diffusion, can transport significantly more moisture out of the wall in a shorter time. In plain English: drying is faster when the damp wall is illuminated with infrared waves. Workplace heating: With the optionally available feet, the heater can be placed vertically or horizontally anywhere for targeted heating. Ideal for cool workplaces, for example in the warehouse, behind refrigerated counters, in workshops or in large halls     Advantages at a glance   • Efficient heating process with environmentally friendly IR-C radiation • Heat transport via light waves - direct object heating without convective loss • Maximum efficiency: 100% of the electrical energy used is converted into heat output • Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust turbulence • Integrated hanging device for mounting on wall or mounting supports • Can also be used as a stand-alone device (suitable stands are available from us as accessories) • Ready to use - no additional installations or expensive modifications required   The ErP table for this heater can be found above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of power requirements for rooms up to 2.5 m ceiling height insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² each additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows: Area of ​​the room in m² x W/m² = required heating output in watts. Calculation example: For a room size of 10 m² with very good insulation quality and two external walls (50 + 10 W/m²), the recommended power requirement is 10 m² x 60W/m² = 600 W.       Technical data   heating output 900W heating type infrared heat waves Suitable room temperature 0 - 60 °C heating surface 0.91 m² heating levels 1 voltage 220 - 240 V/50 Hz nominal current consumption max. 3.9 A power consumption max. 0.90 kW housing aluminum cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 755 x 22 mm (without feet) Weight 7.5 kg protection class IP54 overheating protection Yes Trotec article no. 1,410,003,016 guarantee 2 years

Read more less

Reliable dehumidifier with solid drying performance   This device has been manufactured for many years and has been continuously developed. The current version has an attractive design and has been brought up to date with the latest technology.     Comfortable operation   The unit is operated via a clearly laid out control panel with a display on top, where the desired target humidity can be entered in 5% increments. Continuous operation is also possible. The integrated hygrostat then implements this target fully automatically and automatically regulates the performance of the compressor and two-stage fan.   The display panel shows you, among other things, the current value of the relative humidity in the room, the current room temperature and the entered target value. The dryer also has a timer function, an automatic error diagnosis system and a memory function. This memory function ensures that the set humidity value and the operating mode are saved even after switching off or in the event of a power failure. This makes this model also suitable for operation with a timer, for example if you only want to run it during off-peak hours.   The water that is extracted from the air is collected in the bucket at the front. A float automatically stops operation when the bucket is full. Alternatively, the water can be drained directly into a lower drain via a connectable hose. The hose must be laid in a downward direction as there is no pump in the device.     Also suitable for drying laundry   The combination of good dehumidification power and an appealing air flow makes this dehumidifier also a tumble dryer, which can dry 2-3 washing machine loads per day in a temperate environment. Dehumidifiers offer the advantage that laundry is dried gently, just like in nature. Colors stay bright and clothes last longer than with conventional tumble dryers, while using significantly less electricity. In addition, sensitive materials such as wool, silk or synthetic fibers can be dried without any problems.     Permanent air circulation   In this model, the compressor (= dehumidification) stops when the desired humidity is reached, while the fan runs continuously to circulate the room air.     Environmentally friendly refrigerant Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection.   The natural refrigerant propane (R290) is an organic compound and is classified as a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). Additional benefit for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.     Advantages at a glance • Hygrostat-controlled automatic dehumidification with target value pre-selection between 30 and 80 % RH in 5 % steps As soon as the desired humidity level is reached, the compressor pauses until the humidity in the room increases again (the fan continues to run to determine the true room humidity). • Continuous operation possible • Display of the desired humidity, the current humidity and the current room temperature • Memory function • Automatic fault diagnosis system • Laundry drying function • Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust and prevents bacterial growth. • Timer function • Direct hose connection • 2 fan speeds • Level warning light when water tank is full • Overfill protection with automatic shutdown • Hot gas defrosting: faster automatic self-defrosting in cooler environments.     Technical data   dehumidification performance at 30 °C / 80 % RH 25 liters / day air volume 215 m³/h Maximum room size 60 m² (150 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C Selectable target humidity Achievable target humidity 30 - 80 % RH 35 - 80 % (fin evaporator) voltage 220 - 240 V/50 Hz nominal current consumption max. 2.4 A power consumption max. 570W Recommended coverage 10 A cable length approx. 1.6 m Plug EU plug with Swiss adapter refrigerant R290 (122g) GWP3 water bucket 4.3 liters operating noise 50 dB(A) at 1 m distance 47 dB(A) at 2.5 m distance Dimensions L x W x H 274 x 390 x 612 mm Weight 15.5 kg defrosting automatic hot gas automatic dehumidification hygrostat-controlled fan radial, 2-stage fan automatic shutdown when bucket is full Yes prefilter Yes timer Yes continuous operation possible Yes laundry drying mode Yes display shows current room humidity, set humidity memory function yes (saves set values ​​automatically) hose connection yes, suitable hose 12mm inner diameter Similar models Krüger Airsec 3000 guarantee 2 years  

Read more less

The "105S" dehumidifier closes the gap between inexpensive household dehumidifiers and professional construction dryers. This device is a Trotec in-house development that has taken many customer needs into account. It is made in Germany and is very attractive in terms of what you pay for and what you get. The "105SHC" version offered here is the extended version with a built-in hour counter for optimal control of operation and consumption.     Robust but lightweight   The housing is made of robust aluminum. Aluminum has the advantage that it is durable, but still remains light in weight at just 14.5 kg, which makes carrying the device easier. The dryer also stands on four feet.     Easy operation   The simple control panel allows you to read the current room humidity and temperature, and the desired target humidity can be selected at the touch of a button. The integrated hygrostat stores the value and regulates the performance of the compressor and two-stage fan automatically and in line with requirements. Thanks to the advanced software, the dryer works precisely and more economically than other devices with comparable dehumidification power. Continuous operation is also possible on request.   Timer function: If you want to limit the operation to a specific time, you can use the integrated timer. If you want the dryer to work at the same times every day, it can also be connected to an external timer. Thanks to the memory function, the dehumidifier remembers the last setting and resumes operation with the same setting after a power failure (for example, if you only want to dehumidify during low tariff periods).     Bucket with float and direct hose connection   The condensate water extracted from the air is collected in the inserted bucket as standard. This has a comfortable capacity of 5.2 liters. A float automatically stops operation when the bucket is full. Alternatively, a hose can be connected to drain the water directly into a lower drain. The hose must be laid in a downward direction as there is no pump integrated into the device.     Easy-to-clean air filter   To prevent the interior of the device from becoming excessively dirty, a filter cleans the air in the intake area. This filter is easy to remove and clean. It is reusable.     Advantages at a glance • Hygrostat control with real-value humidity preselection • Digital display of the current humidity and temperature values • Electronic automatic defrosting • 2 fan speeds • Level warning light when water tank is full • Optional fully automatic or continuous operation • Overflow protection with automatic shutdown • Washable air filter • Timer function • Carrying handles • Connection for external condensate drain • Stackable aluminum housing - light and robust • Professional quality “made in Germany” with a good price-performance ratio     Technical data   dehumidification performance at 30 °C / 80 % RH 28.4 liters / day air volume 173 m³/h Maximum room size 70 m² (175 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C Selectable target humidity Achievable target humidity 30 - 90 % RH 35 - 90% RH (finned evaporator) voltage 220 - 240 V/50 Hz nominal current consumption max. 2.1 A power consumption max. 500W Recommended coverage 10 A cable length approx. 1.5 m Plug EU plug with Swiss adapter refrigerant R290 (125g) GWP3 water bucket 5.2 liters operating noise 50 dB(A) at 1 m distance 47 dB(A) at 2.5 m distance Dimensions D x W x H 250 x 342 x 517 mm Weight 14.5 kg defrosting automatic recirculation, electronic automatic dehumidification hygrostat-controlled fan radial, 2-stage fan automatic shutdown when bucket is full Yes prefilter Yes timer Yes continuous operation possible Yes operating hour meter Yes display shows current room humidity, set humidity memory function yes (saves set values ​​automatically) hose connection yes, short hose piece included guarantee 2 years    

Read more less

Semi-professional dehumidifier for basements, construction sites and laundry drying   This comfort dehumidifier protects and preserves what is dear to you. It is suitable for powerful dehumidification tasks in the basement and laundry room, as well as for professional use for drying water damage or keeping construction sites dry. Thanks to hot gas defrosting, it is also recommended for optimal drying results at low temperatures.     The all-rounder: Protects against mold, corrosion and structural damage Excess humidity in the room air (> 60 percent) provides an ideal environment for pathogens. At this level, mold also spreads in the living space and increases the risk of respiratory disease. Vintage cars in the garage, works of art on the walls and archived documents and books also suffer from excessive humidity. There are many causes of harmful humidity: defects in the building's waterproofing, inadequate ventilation, storms, floods or leaks in water pipes. The 122E keeps you dry.     Compact design – outstanding dehumidification performance Whether as a room climate improver in a private environment or as a construction dryer in commercial use - the cuboid-shaped stainless steel dehumidifier impresses with its convenient features (e.g. 24-hour timer and auto-restart function as well as a control panel lock function), an 8-liter condensate container and a strong dehumidification capacity of 38 l/24 h at 240 m³/h air volume - sufficient for room sizes of up to 100 m² or 250 m³. Thanks to the auto-restart function (memory function), the device automatically starts in the preselected settings after a brief power cut. For maximum operating comfort, the control panel is equipped with easy-care membrane buttons and a digital display of the room temperature and humidity. The target humidity is preselected in 5 percent increments. The standard equipment also includes a level warning light when the water tank is full, overfill protection with automatic shut-off and a reusable air filter that is easy to clean.     Gentle laundry drying with dehumidifiers In addition to dehumidifying the air in the room, a dehumidifier can be used conveniently to dry laundry - as a supplement or as a complete replacement for a conventional tumble dryer. The laundry drying function (or textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. Dehumidifiers offer the advantage that laundry is dried gently, just like in nature. Colors stay bright and clothes last longer than with conventional tumble dryers, while using significantly less electricity. In addition, sensitive materials such as wool, silk or synthetic fibers can be dried without any problems. In contrast to pure air drying, the laundry becomes much softer and more comfortable to wear on the skin.    environmentally friendly refrigerant R290 Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and is a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Additional benefit for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.     A dehumidifier for all occasions • Ideal for a healthy living environment in living areas • Moisture protection in archives, libraries and art exhibitions • Corrosion and mold protection in (classic car) garages, basements and storage rooms • Drying of construction sites and drying of damp masonry after water damage     connection for external condensate drain For applications where regular emptying of the 8-litre condensate container is either not possible or undesirable, for example when using the dryer for unattended continuous drying in the basement, garage, holiday home or on boats, the dryer has an integrated hose connection for direct drainage of the condensate into a drain. A short piece of suitable hose is already included in the scope of delivery.     Hot gas defrosting for faster drying results In low temperature ranges (below 12 °C), the integrated hot gas automatic defrosting system ensures consistently reliable air dehumidification - without long defrosting phases. In contrast to the time-consuming circulating air defrosting of normal condenser dryers, defrosting is carried out by introducing hot gas into the evaporator. This significantly shortens the duration of defrosting and the drying target is achieved more quickly.     SuperDry function for accelerated textile drying The special SuperDry function is practical for quickly dehumidifying wet laundry, clothing or carpets. This means that even large textiles that don't fit in the dryer can be dried in no time.    Advantages at a glance • Quality hot gas automatic defrosting • SuperDry function for accelerated textile drying • Automatic hygrostat-controlled dehumidification operation with real-value humidity preselection • Activated carbon filter against unpleasant odors • 24-hour timer • Auto-restart function (memory function) • suitable for building drying • suitable for keeping damp cellars dry • suitable for drying laundry • Permanent mode • Easy-care material mix with a striking look • Digital display of the current humidity and temperature values • Control panel lock function (child lock)     Technical data   dehumidification performance at 30 °C / 80 % RH 38 liters / day air volume 240 m³/h Maximum room size 100 m² (100 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 35°C humidity range 30 - 90 % RH voltage 220 - 240 V/50 Hz nominal current consumption max. 2.9 A power consumption max. 750W Recommended coverage 10 A cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (96g) GWP3 water bucket 8 liters operating noise 52 dB(A) at 1 m distance 49 dB(A) at 2.5 m distance Dimensions L x W x H 453 x 310 x 635 mm Weight 27.5 kg defrosting automatic hot gas automatic dehumidification hygrostat-controlled fan axial, 2-stage fan automatic shutdown when bucket is full Yes prefilter Yes timer Yes continuous operation possible Yes laundry drying mode Yes display shows current room humidity, set humidity memory function yes (saves set values ​​automatically) hose connection yes, short hose piece included guarantee 2 years  

Read more less

Professional construction dryer with large bucket   A high-quality dehumidifier for commercial use and for drying out water damage, made in Europe. Its impressive external appearance is in no way inferior to its inner values: All electrical components are specially encapsulated and thus protect the electronics from harmful deposits that could impair their function and longevity. This dryer is therefore also ideal for use under demanding conditions. Thanks to its maintenance-friendly design, it is easy to care for.   Compared to cheaper reciprocating piston compressors, the high-quality 0.58 kW rotary compressor installed here offers the advantage of higher performance with comparatively lower power consumption - and also creates reserves for high dehumidification performance even in unheated rooms. In addition, the high-quality hot gas automatic defrosting system ensures a much more efficient dehumidification performance compared to other defrosting systems, without time-related defrost breaks during which no dehumidification takes place.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and is a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Additional benefit for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.     User-friendly   Thanks to its robust housing, ergonomic recessed handles with an internal grip clip and four stable steering wheels with roll stops, the device is ideal for use on construction sites and for drying water damage. However, these advantages are also appreciated in commercial premises or in private basements.   The storage is also well thought out: two practical stacking grooves on the top of the device enable stable and space-saving stacking during transport and in storage.     An integrated operating hour counter reliably documents the exact operating time, even during longer drying operations.     Integrated compressor heat protection with automatic switch-off   When drying with extremely high humidity and high temperatures - for example when repairing water damage - refrigeration dryers quickly reach their red performance range. The catchy "35 rule" applies here: drying water damage at temperatures above 35 degrees reduces the dryer's service life to less than 35%. However, this is not a question of component quality, but pure physics, which applies to all refrigeration dryers on the market regardless of the manufacturer. While most professional condenser dryers can still work easily up to 35 °C at moderate humidity of around 70% RH, very high humidity combined with a high room temperature means that significantly more energy is added to the moist room air, which must also be "worked off" via the refrigerant. As a result, the pressure of the refrigerant in the system increases immensely, which leads to a destructive load on the compressor. The dehumidifiers will initially continue to work, but well above their limit "deep in the dark red range", which results in an extremely shortened remaining service life. That's why the TTK-S series commercial dehumidifiers have integrated compressor heat protection to actively preserve the value of your devices: Sensors constantly monitor the heat load of the compressor. If the temperature is within the defined working range, the integrated heat protection display pulses in a long sequence, indicating that the dehumidifier is operating optimally. As soon as the temperature exceeds the critical limit of 35 °C, the automatic system switches the compressor off to protect it, while the fan continues to operate, and automatically reactivates the compressor as soon as the temperature falls below the 35° limit again. This protection not only significantly extends the service life of the dehumidifier, it also prevents thermal damage to materials in the room and the building structure when they are in use.     options   • Dual meter available for additional recording of power consumption. • powerful condensate pump for permanent drying with a pumping capacity of up to 50 m and a maximum discharge head of 4 m     Advantages at a glance • High dehumidification performance even at low temperatures • Maximum dust and moisture protection for all electrical components • Extremely maintenance-friendly design • Optimal handling properties • Can be transported and stored in any position thanks to the rotary piston compressor • Practical stacking groove for stable, space-saving storage and transport • Multi-stacking capability with identical models • Practice-optimized industrial design • Made in Europe     Technical data   dehumidification performance at 30 °C / 80 % RH 28 liters / day air volume 250 m³/h Maximum room size 70 m² (175 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C humidity range 35 - 90 % RH voltage 220 - 240 V/50 Hz nominal current consumption max. 2.3 A power consumption max. 500W Recommended coverage 10 A cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R290 (150g) GWP3 water bucket 6 liters operating noise 52 dB(A) at 1 m distance 49 dB(A) at 2.5 m distance Dimensions L x W x H 375 x 345 x 603 mm Weight 26 kg defrosting automatic hot gas automatic dehumidification hygrostat-controlled fan axial, 1-stage fan automatic shutdown when bucket is full Yes prefilter Yes timer no continuous operation possible Yes memory function yes (saves set values ​​mechanically) hose connection yes, short hose piece included guarantee 2 years    

Read more less

The inexpensive dehumidifier with built-in condensate pump.     Comfort function: Temperature-dependent dehumidification   For an optimal room climate, the room temperature and humidity must be coordinated. And this is exactly where temperature-dependent dehumidification comes in. The device regulates the humidity level to the optimal value depending on the temperature. The comfort function is particularly recommended for use in rooms with temperature fluctuations throughout the day or year. If the room temperature changes, the dehumidifier adjusts its dehumidification performance fully automatically.     Effective and simple   The device also has a hygrostat-controlled automatic dehumidification system. A fixed humidity value is selected which should not be exceeded. The setting range is between 35 and 85% relative humidity, in 5% increments. If the value is exceeded, the dehumidifier activates automatically and switches itself off again automatically, saving energy, as soon as the desired target value is reached.     Gentle laundry drying with dehumidifiers   In addition to dehumidifying the air in the room, the dehumidifier can also be used to conveniently dry laundry - either as a supplement or as a complete replacement for a conventional tumble dryer. The laundry drying function is comparable to traditional air drying outdoors.   Dehumidifiers offer the advantage that laundry is dried gently, just like in nature. Colors stay bright and clothes last longer than with conventional tumble dryers, while using significantly less electricity. In addition, sensitive materials such as wool, silk or synthetic fibers can be dried without any problems. In contrast to pure air drying, laundry becomes softer and more comfortable to wear on the skin because the clothes move in the gentle wind of the dryer while drying.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and is a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Additional benefit for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.     Convincing features   The timer function, a level warning light when the water tank is full, the overfill protection with automatic shutdown and a laundry drying mode round off the comfort features of this TTK dehumidifier. In addition, the integrated, washable air filter enables additional air purification by extracting dust or animal hair. Thanks to its wheels and practical carrying handles, the device is also ideally prepared for flexible changes of location. Thanks to its convenient features, it is easy to handle and low-maintenance.     bucket, direct hose connection and integrated condensate pump   The water that is extracted from the air is collected in a 6-litre bucket as standard. A float automatically stops operation when the bucket is full. Alternatively, the water can be drained directly into a lower drain via a hose. If there is no floor drain, the water can be pumped up to 4 metres high using the pump already built into the device, for example into a washbasin, out of a basement window or even up one floor. Direct drainage is particularly convenient when the unit is not being used, as there is no need to empty the bucket (hobby rooms, holiday homes, etc.).   The integrated pump is not suitable for long-term continuous operation (such as when drying water damage). However, short-term continuous operation, for example when drying laundry, is no problem.     Permanent air circulation   In this model, the compressor (= dehumidification) stops when the desired humidity is reached, while the fan runs continuously to circulate the room air.     Advantages at a glance • Hygrostat-controlled automatic dehumidification with selectable target value between 35 and 85% RH in 5% increments • Comfort mode for temperature-dependent automatic control of humidity • Overfill protection with automatic shutdown when bucket is full • Level warning light when water tank is full • Connection for external condensate drain with integrated condensate pump • Pump-out function for faster condensate drainage • Optional fully automatic or continuous operation • Easy-to-read, illuminated display • Display of relative humidity • Laundry drying function • Timer function • 2 fan speeds • Cable winding     Technical data   dehumidification performance at 30 °C / 80 % RH 47 liters / day air volume 375 m³/h Maximum room size 120 m² (100 m³) Minimum room size 4 m² (10 m³) temperature range 5 - 32°C humidity range 35 - 100 % RH voltage 220 - 240 V/50 Hz nominal current consumption max. 5.4 A power consumption max. 1060W Recommended coverage 10 A cable length approx. 1.6 m Plug EU plug with Swiss fixed adapter refrigerant R290 (145g) GWP3 water bucket 6 liters pump integrated, discharge head up to 4 m operating noise 50 dB(A) at 1 m distance 47 dB(A) at 2.5 m distance Dimensions D x W x H 282 x 392 x 616 mm Weight 19.5 kg defrosting automatic recirculation, electronic automatic dehumidification hygrostat-controlled fan radial, 2-stage fan automatic shutdown when bucket is full Yes prefilter Yes timer Yes continuous operation possible Yes laundry drying mode Yes display shows current room humidity, set humidity memory function yes (saves set values ​​automatically) hose connection yes, short hose piece included guarantee 2 years

Read more less

A good, affordable racehorse for construction dryers and water damage repairers. Everything that is unnecessary for continuous use has been consistently left out of this dehumidifier. It has neither a display nor a hygrostat (a plug-in hygrostat can be ordered as an option if required). This makes it very easy to use, safe from tampering and extremely affordable. On the other hand, everything that is needed for effective and fast drying is there: powerful dehumidification performance, hot gas defrosting, hour counter as well as large rollers and a guide bar for easy mobility on construction and damage sites.     Easy operation   Commissioning is child's play. Plug in, flip the main switch, and you're done!   The operation will now continue until either the bucket is full or until the dryer is uninstalled. As long as the device is connected to the power supply, it will run reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power failure: if the power comes back on, the dehumidifier will continue its task with the same settings.   Thanks to the professional hot gas automation, it can also be used in cooler environments without any problems, although the dehumidification power decreases at cold temperatures, as with all condensation dryers. The built-in finned evaporator (cooling element) has an extremely high efficiency in temperate environments and can dry the air to just under 40% RH. The dryer is also equipped with a rotary piston compressor. This means that it can be transported and stored in any position.     Optional hygrostat   Should a hygrostat be required at some point to regulate the target humidity, the dryer is prepared so that the Trotec hygrostat HG110 can be connected directly using a jack plug. Please note the accessories.     bucket and direct hose connection   The water extracted from the air is collected in a 5-litre bucket. A magnetic float automatically stops operation when the bucket is full and a warning light indicates visually that the bucket should be emptied. If necessary, a hose can be connected to the bucket itself if the water can be drained away directly. The hose must be laid in a downward direction as there is no pump integrated into the dryer.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be determined precisely using the hour counter that is integrated as standard. This is particularly useful for commercial applications. Thanks to the counter, it is also possible to determine whether the device was always in operation or whether it was switched off accidentally or intentionally.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection.   The natural refrigerant propane (R290) is an organic compound and is classified as a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Additional benefit for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.     Advantages at a glance   • Affordable price with strong performance in the commercial sector • Can also be used in cooler environments thanks to hot gas defrosting • Robust steel construction with large rollers and guide bar • Suitable for continuous operation • Can be transported and stored in any position thanks to the rotary piston compressor • External hygrostat connection     Technical data   dehumidification performance at 30 °C / 80 % RH 50 liters / day air volume 350 m³/h Maximum room size 125 m² (310 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C humidity range technically humidity range practice 35 - 90 % RH 40 - 90% RH (finned evaporator) voltage 220 - 240 V/50 Hz nominal current consumption max. 3.7 A power consumption max. 820W Recommended coverage 10 A cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5 liters operating noise 56 dB(A) at 1 m distance 53 dB(A) at 2.5 m distance Dimensions D x W x H 495 x 455 x 900 mm Weight 31 kg defrosting automatic hot gas automatic dehumidification Continuous operation, a plug-in mechanical hygrostat is available as an option. fan axial, 1-stage fan automatic shutdown when bucket is full Yes prefilter Yes operating hour meter Yes continuous operation possible Yes display no memory function yes (saves set values ​​automatically) hose connection yes, not included in delivery (suitable inner diameter: 12 mm) guarantee 2 years

Read more less