This infrared heater is perfect for keeping feet and legs warm under a table. Whether outdoors, in the conservatory or at work. The heat is stored in the table top above, so that a pleasant warmth collects in the leg area. Even when positioned next to or within a seating area, the device radiates its pleasant infrared heat comfortably and evenly at seat height. The infrared technology generates heat immediately, without a long warm-up phase. The heat is distributed evenly around the device. Thanks to its light weight and carrying handle, the heater can be set up or supplied quickly.       Safely protected from rain and dust   Neither damp weather, sudden rain nor dust can harm the robust standing heater. The high-quality aluminum housing is protected against dust deposits, splashes and water jets in accordance with protection class IP55.     Low Glare: Less light, more atmosphere   So that you or your guests can enjoy time outdoors without glare and annoying red light, the spotlight has a long-lasting low-glare infrared tube with 80% less light emission, while maintaining high heat efficiency. The reduced proportion of red light creates a cozy candlelight atmosphere - ideal for cozy, warm evenings under a starry sky.   The high-quality carbon infrared tube generates heat based on the natural principle of solar radiation. And it is particularly energy efficient, as a large proportion of the energy used is converted into direct heat. It is not the air that is heated, but the objects and people in the immediate vicinity absorb the radiant heat, store it and release it back into their surroundings as secondary radiation. This heat distribution, which is based on nature, is carried out silently and without stirring up dust by a fan, which means that asthmatics, allergy sufferers and people with sensitive airways in particular can breathe in and out freely.     Enjoy warmth without fear of contact   In contrast to other heating solutions, the infrared heater is particularly safe. A close-meshed metal grid protects the carbon infrared heating tube from curious children's fingers, contact with legs or feet, and protects pets. In addition, a high-quality velour coating reduces the surface temperature of the protective grid, so that even direct contact does not pose an immediate danger.     Stable and stable in every situation   The plate-shaped base (Ø 20 cm) ensures a secure stand. The optimized weight distribution with a low center of gravity provides additional protection against tipping, so that tipping over is almost impossible when used properly. If the standing heater is accidentally knocked over, the integrated tilt switch automatically deactivates the stable device.     Fast commissioning   After the simple and quick assembly of the stand, this heater only needs to be set up and plugged in.     Advantages at a glance   • Infrared heat without preheating • Even heat distribution (360°) • Heating power 1200 W • Glare-free heat thanks to high-quality low glare carbon infrared tube – approx. 5500 hours of light with 80% light reduction • High-quality aluminum design housing • Protection against burns thanks to the high-quality velour coating of the protective grille of the infrared heating tube • Rainproof and protected against the ingress of foreign bodies, protection class IP55 • Space-saving column design with round base • Fits perfectly under the table to warm your legs • Clean, condensation-free and odorless heat – without any noise • No dust turbulence, therefore suitable for allergy sufferers • Tilt switch integrated in the device • Energy-efficient conversion of electricity into heat     Technical data   heating output 1200W on/off switch yes, single-stage heating type Short-wave infrared heat waves, low-glare tubes effective area approx. 5 m² voltage 220 - 240 V/50 Hz nominal current consumption max. 5.2 A Recommended coverage 10 A cable length approx. 1.8 m Plug EU plug with Swiss fixed adapter Dimensions W x H x D 200 x 650 x 200 mm (including stand) Weight 3 kg protection class IP55 (dust and water jet protected) remote control no LED display no parental controls anti-tip protection, velour-coated surface timer no Trotec article number: 1,410,003,908 guarantee 2 years    

Read more less

This condensate pump is suitable for the following Trotec dehumidifiers: • TTK125S • TTK175S • TTK355S • TTK655S • TKK500 • TTK900MP The pump is inserted into the dehumidifier instead of the bucket and is connected directly to the existing socket in the device. Compared to a free-standing pump, this system has the advantage that no additional power socket is required, but also that the pump and dryer work together. This means that if the pump breaks down, the dehumidifier also stops. The system is also suitable for unattended continuous operation. The scope of delivery includes a connected 5 m drain hose, which can also be extended with a suitable adapter. Trotec article no. 6.100.003.030

Read more less

The top dryer for medium-sized rooms and for rooms with high humidity. This dryer performs reliable dehumidification work in both cooler and temperate rooms. Very similar to the FDK44 model, but with digital control and slightly increased dehumidification performance. The desired target humidity is set on the control panel. If the measured humidity is higher than the set value, the dryer works, otherwise it pauses. The display shows the current room humidity. The DH25 can use its dehumidifying power, for example, to keep single or double garages, archive rooms, basement areas dry all year round, or to stabilize humidity in washing and drying rooms. Thanks to the well-developed hot gas defrosting system, it can be used down to almost freezing point. Also very noticeable is its good performance in low humidity areas, where it still removes water from the air, where other dryers have long since stopped producing a drop. The moist air is sucked in on one side of the housing and cleaned by an industrial, reusable filter. The dry air is blown into the room on the opposite side and creates effective circulation in the room. Many locations are possible in terms of placement in the room. Both on the floor and on a free shelf (the wheels can be secured). The condensate is drained directly via the hose connection. Important: the hose must have a constant gradient towards the drain so that it can drain cleanly and does not back up into the drip tray. The construction is solid and high quality. The housing is made of white powder-coated metal, the interior consists of components from the professional league. The device is therefore easily suitable for unattended continuous operation. Even in the event of a power failure, it resumes dehumidification work with the same settings and is therefore also suitable for operation with a timer or a smart home system. The dryer stands on 4 robust castors (with brakes) and has two foldable handles on the top of the housing for easier mobility. Versatile application • as a dehumidifier for warehouses, commercial and industrial premises, garages and cellars • for continuous dehumidification of temperate but also cold rooms from 1°C • for unattended continuous operation • for operation with a timer     dehumidification performance Thanks to sophisticated hot gas defrosting, the dryer can be used over a wide temperature range between +1°C and +35°C, although as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions: 30°C/80% RH: 40 liters 20°C/80% RH: 16 liters 20°C/60% RH: 12 liters 10°C/60% RH: 7 liters (RH=relative humidity)   Optional accessories The plug-in device is included in the scope of delivery. If required, we have various suitable accessories, such as: • Hose coupling • Hose • Condensate pump (if the condensate is to be transported upwards) Stronger version The device is also available with double strength as "FDK100" -> Details Comparable devices: Lunor L25     Technical data  Model: Trotec DH25S Tension: 230V / 50Hz Power consumption: max. 700W / 510W (at 20°C/60% RH) Sound pressure level: (our measurement) 1 m distance 53 dB(A) 2.5 m distance 51 dB(A) Dehumidification performance: 40 liters/day (30°C / 80% RH) air circulation volume: 450 m³/h (installed, free blowing approx. 650 m³) condensate tank: No tank / only hose connection possible Compressor: rotary compressor refrigerant: R290 (152gr.) Dimensions (L/H/D): 580 x 455 x 350 mm (including wheels and carrying handles) Weight: 30 kg Operating setting: Digital Ambient temperature: 1°C ~ 35°C Application area: up to 100m² Swiss plug: EU plug with Swiss fixed adapter, 5m cable hose connection: Yes Guarantee: 2 years

Read more less

This air hose fits, among other things, the adapter for the TTK171Eco construction dryer.   Its light weight makes it easy to handle and transport. With a high bending radius of 1 x diameter, it is extremely flexible and can be used in a variety of ways. Its specially coated PVC jacket is abrasion-resistant and flame-retardant     Technical data   • Temperature -5°C to +80°C • Standard length 6 m • Bending radius 1 x diameter • Inner diameter 160 mm • PVC-coated polyamide fabric • vibration-resistant and flame-retardant • Reinforcement through concealed spring steel spiral • corrugated inside and out • highly flexible • Color gray

Read more less

Reinforced and very flexible air transport hose with a wide range of applications, for example for heating, ventilation or air conditioning.   We recommend using the SP series air transport hoses in combination with the corresponding Trotec connecting pieces.   application examples   • Ventilation and exhaust ventilation in air conditioning and ventilation technology • Building drying, repair of water damage • Winter building heating, stable ventilation, hall and tent heating • Trade fair construction and events • Grain drying • Bulk loading • Tank ventilation and degassing • Silo emptying • Air showers at car washes. • etc.     Technical data   • Temperature range: -20 °C to +80 °C • Can also be used for short periods with hot air up to 100 °C • Particularly robust design made of reinforced, PVC-coated polyamide fabric • Kink-proof and tensile-resistant • Spiral-free sleeves on both sides • With abrasion protection and integrated steel spiral • Bending radius 0.5 x ø • Standard length 7.6 m   Trotec article no. 6.100.001.214

Read more less

Proven UV dye for pipe burst detection, available in various colors. This dispersion can be diluted with water. In the visible wavelength range it leaves practically no visible traces, but when illuminated with UV light it glows intensely.   The product is particularly suitable for leak tests on water-bearing levels of flat roofs or for checking drains and downpipes. The fluorescent substance can be detected and made visible under UV light at its exit points.   Further possible uses include non-destructive testing (NDT) and leak detection, when capillary permeability is of secondary importance and no visible traces of the UV tracer should remain.   To ensure that users have the optimal UV fluorescent dye for every task, the product is now available in four bright colors. In addition to the established green version, there are now also red, blue and purple.   Important: Luminat is not suitable as a food coloring.     scope of delivery   1 bottle with 1 liter of dye blue     Advantages at a glance   • Proven UV tracer for pipe break detection • No metabolism – ideal for long-term studies • Very intense color glow under UV stimulation • Color-neutral application – leaves no visible discoloration on most surfaces • 100% formaldehyde-free fluorescent dye, made in Germany • Available in various colors – for every environment and preference

Read more less

Proven UV dye for pipe burst detection, available in various colors. This dispersion can be diluted with water. In the visible wavelength range it leaves practically no visible traces, but when illuminated with UV light it glows intensely.   The product is particularly suitable for leak tests on water-bearing levels of flat roofs or for checking drains and downpipes. The fluorescent substance can be detected and made visible under UV light at its exit points.   Further possible uses include non-destructive testing (NDT) and leak detection, when capillary permeability is of secondary importance and no visible traces of the UV tracer should remain.   To ensure that users have the optimal UV fluorescent dye for every task, the product is now available in four bright colors: green, red, blue and purple.   Important: Luminat is not suitable as a food coloring.     scope of delivery   1 bottle with 1 liter of green dye   Advantages at a glance   • Proven UV tracer for pipe break detection • No metabolism – ideal for long-term studies • Very intense color glow under UV stimulation • Color-neutral application – leaves no visible discoloration on most surfaces • 100% formaldehyde-free fluorescent dye, made in Germany • Available in various colors – for every environment and preference

Read more less

Proven UV dye for pipe burst detection, available in various colors. This dispersion can be diluted with water. In the visible wavelength range it leaves practically no visible traces, but when illuminated with UV light it glows intensely.   The product is particularly suitable for leak tests on water-bearing levels of flat roofs or for checking drains and downpipes. The fluorescent substance can be detected and made visible under UV light at its exit points.   Further possible uses include non-destructive testing (NDT) and leak detection, when capillary permeability is of secondary importance and no visible traces of the UV tracer should remain.   To ensure that users have the optimal UV fluorescent dye for every task, the product is now available in four bright colors. In addition to the established green version, there are now also red, blue and purple.   Important: Luminat is not suitable as a food coloring.     scope of delivery   1 bottle with 1 liter of purple dye     Advantages at a glance   • Proven UV tracer for pipe break detection • No metabolism – ideal for long-term studies • Very intense color glow under UV stimulation • Color-neutral application – leaves no visible discoloration on most surfaces • 100% formaldehyde-free fluorescent dye, made in Germany • Available in various colors – for every environment and preference

Read more less

Proven UV dye for pipe burst detection, available in various colors. This dispersion can be diluted with water. In the visible wavelength range it leaves practically no visible traces, but when illuminated with UV light it glows intensely.   The product is particularly suitable for leak tests on water-bearing levels of flat roofs or for checking drains and downpipes. The fluorescent substance can be detected and made visible under UV light at its exit points.   Further possible uses include non-destructive testing (NDT) and leak detection, when capillary permeability is of secondary importance and no visible traces of the UV tracer should remain.   To ensure that users have the optimal UV fluorescent dye for every task, the product is now available in four bright colors. In addition to the established green version, there are now also red, blue and purple.   Important: Luminat is not suitable as a food coloring.     scope of delivery   1 bottle with 1 liter of red dye     Advantages at a glance   • Proven UV tracer for pipe break detection • No metabolism – ideal for long-term studies • Very intense color glow under UV stimulation • Color-neutral application – leaves no visible discoloration on most surfaces • 100% formaldehyde-free fluorescent dye, made in Germany • Available in various colors – for every environment and preference

Read more less

Fast cooling and a comfortable room climate at an affordable price. This 3-in-1 air conditioner offers efficient cooling of offices and rooms up to 20 m² and makes working more pleasant. In addition to pure cooling, there is also a dehumidification and ventilation function.   When the preselected target temperature is reached (continuously adjustable between 17-35 °C), the integrated thermostat switches the compressor in the device off completely. In comparison to conventional designs, this makes the air conditioning unit extremely economical to cool. Of course, the compressor is automatically activated again when the target temperature is exceeded, as long as the device is switched on.     comfort features for well-being   For a restful sleep without catching a cold, the device has a night mode that slowly increases the temperature. In addition, the LED display can be switched off completely so that you are not disturbed by any unnecessary light.   Two fan speeds and the variable adjustable blowing direction ensure the optimal distribution of the air flow. In combination with the integrated 24-hour timer, electricity costs can be saved, as this allows the device to be switched on and off at specific times. This is very helpful, for example, if the room is only used at certain times.   Follow-Me function: remote control with intelligent temperature measurement All functions and settings can be carried out not only directly on the LED device control panel, but also via remote control without having to get up. The integrated "Follow-Me function" also gives you even more automatic comfort: The thermostat inside the air conditioner normally measures the current room temperature at the location and shows this on the LED display. However, the remote control can also measure the temperature exactly where it is currently located. When the "Follow-Me function" is active, the air conditioner automatically receives the current temperature value from the remote control every 3 minutes and adjusts itself accordingly. So if you use the remote control to move from a place in the shade to a place by a sunny window, for example, the air conditioner will increase the cooling capacity accordingly to compensate for the warmer temperatures.    Simultaneous dehumidification of the room air In summer, it's not just the heat that's unpleasant, but often the humidity is too high. During the cooling process, this air conditioner removes up to 1.8 liters of water per hour from the air. This makes the room climate much more pleasant. In addition, the integrated dehumidification function also prevents unhealthy mold formation. The water that is removed from the air is evaporated directly into the open air with the warm air via the exhaust hose. The internal container for residual water only needs to be emptied very rarely, as it only has to collect the few drops that can no longer be evaporated once the device is switched off.     installation and maintenance   The air conditioning unit can be set up in just a few steps and is ready for use straight away. The pre-assembled air filter cleans the room air of lint, dust and animal hair and can be easily removed and cleaned.   Propane (R290) as an environmentally friendly refrigerant in air conditioning systems  Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air conditioning unit makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and is a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). Additional benefit for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.    Advantages at a glance   • Energy efficiency class A • 2 kW cooling capacity • Three operating modes: cooling, ventilation, dehumidification • Two ventilation levels • Timer function • Practical LED display • Display of room temperature • Easy-care membrane keypad • Adjustable air outlet direction • IR remote control • Removable air filter • Air purification function (pet hair, lint, dust) • Quiet operation < 53 dB(A)   Why do you need an exhaust hose? Professional home air conditioning units worldwide are all compression refrigeration systems. And these generate both cold and heat - unalterable physics. The cold generated is wanted in the room, but the heat is not. That's why it has to go outside. With split units, it is automatically outside, because here the heat is dissipated directly in the condenser installed outside. Nevertheless, these units also require a connecting line for the circulating coolant, which ensures the transport of cold.  With a monoblock design, the heat is centrally located in the device and must therefore be directed outside without mixing with the indoor air to warm it up again. For this purpose, at least one exhaust hose is required, which is therefore an integral part of every monoblock air conditioning unit available on the market such as this one, even if it is not directly visible in every illustration of the application.     Technical data   cooling capacity max. 2 kW (7000 Btu/h) Our recommendation room size max. 20 m² or 50 m³ Room size information manufacturer max. 26 m² or 65 m³ Minimum room size 7 m² fan speeds 2 Selectable room temperature 17 - 30 °C dehumidification performance 1.8 liters / h ambient temperature max. 35 °C power connection 220 - 240 V, 50 Hz Recording max. 1 kW nominal current consumption 3.3 A Recommended coverage 10 A cable / connector 1.5 m cable, EU plug with Swiss fixed adapter T12 refrigerant R290 (130g) GWP 3 Operating noise fan level 1   at a distance of 1 m 53 dB(A) at a distance of 3 m 49.5 dB(A) exhaust hose Ø 153 mm, length 1.5 m Dimensions (H x W x D) 703 x 345 x 355 mm Weight 22.5 kg Trotec article no. 1,210,002,012 guarantee 2 years  

Read more less

A good air conditioning system for cooling the bedroom, living room or office. Simply set the desired temperature between 16°C and 31°C and the device will automatically cool the room air to the set value. The extracted heat is led out the window via an exhaust hose.     comfort functions   With remote control, 24-hour timer and automatic mode, this model offers you convenient control from your seat, pre-scheduled switching on or off and independent cooling depending on the room temperature.     fan function – with and without cooling   Pure ventilation operation is also possible: a two-stage adjustable fan blower with an air volume of up to 320 m³/h ensures fresh wind and gentle air circulation in the room - even without activating the cooling compressor. The direction of the air flow can be manually adjusted using the horizontal air guide flaps so that the fresh breeze arrives exactly where you want it. In addition, the air filter integrated on the back of the device filters fluff, dust flakes and animal hair from the room air - an advantage not only for allergy sufferers.     Simultaneous dehumidification of the room air   In summer, it's not just the heat that's unpleasant, but often the humidity is too high. During the cooling process, this air conditioner removes up to 0.8 liters of water per hour from the air. This makes the room climate much more pleasant. In addition, the integrated dehumidification function also prevents unhealthy mold formation. The water that is removed from the air is evaporated directly into the open air with the warm air via the exhaust hose. The internal container for residual water only needs to be emptied very rarely, as it only has to collect the few drops that can no longer be evaporated once the device is switched off.     Mobile and flexible instead of drilling and doweling   If you want to place the device in another room, it can be easily moved from one place to another with its smooth-running transport wheels. In contrast to permanently installed air conditioning systems, you can always use a mobile air conditioning system exactly where cooling is needed - without drilling, screwing or dowels. All you need to do is fix the exhaust hose included in the delivery in a window or door opening and you can start cooling the room.   To ensure that no warm outside air penetrates into the room to be cooled through slightly open windows or doors, we offer window and door seals as optional accessories. This allows you to cool even more efficiently.     Tip for restful sleep   If you want to fall asleep with gentle cooling on warm summer nights, you can set a timer so that the air conditioner switches itself off after a certain time to prevent your body from cooling down during the night.     Propane (R290) as an environmentally friendly refrigerant in air conditioning systems   Every year, synthetic refrigerants release several million tons of environmentally harmful CO2 emissions (greenhouse gases) into the air. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air conditioning unit makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and is a hydrocarbon. In contrast to synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). Additional benefit for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant and thus also reduces your energy costs.     Advantages at a glance • Suitable for rooms up to 24 m² / 60 m³ • Energy efficiency class A • 2.6 kW cooling capacity • 3 operating modes: cooling, ventilation, dehumidification • 2 ventilation levels • Adjustable air outlet direction • Target value pre-selection in the range of 16°C to 31°C • Energy-saving operation through automatic switching on/off when the target value is reached/exceeded • 24-hour timer • Remote control + intuitive LED display • Removable air filter against animal hair, fluff, dust flakes • Quiet operation < 53 dB(A) • Environmentally friendly refrigerant R290 • Mobile air conditioning systems - Comfortable cooling machines     Why do you need an exhaust hose?   Professional home air conditioning units worldwide are all compression refrigeration systems. And these generate both cold and heat - unalterable physics. The cold generated is wanted in the room, but the heat is not. That's why it has to go outside. With split units, it is automatically outside, because here the heat is dissipated directly in the condenser installed outside. Nevertheless, these units also require a connecting line for the circulating coolant, which ensures the transport of cold.   With a monoblock design, the heat is centrally located in the device and must therefore be directed outside without mixing with the indoor air to warm it up again. For this purpose, at least one exhaust hose is required, which is therefore an integral part of every monoblock air conditioning unit available on the market such as this one, even if it is not directly visible in every illustration of the application.     Technical data   cooling capacity max. 2.6 kW (9000 Btu/h) Our recommendation room size max. 24 m² or 60 m³ Room size information manufacturer max. 34 m² or 85 m³ Minimum room size 9 m² fan speeds 2 Selectable room temperature 16 - 31 °C dehumidification performance 0.8 liters / h ambient temperature max. 35 °C power connection 220 - 240 V, 50 Hz Recording max. 1 kW nominal current consumption 3.5 A Recommended coverage 10 A cable / connector 1.8 m cable, EU plug with Swiss fixed adapter T12 refrigerant R290 (160g) GWP 3 Operating noise fan level 1   at a distance of 1 m 53 dB(A) at a distance of 3 m 49.5 dB(A) exhaust hose Ø 145 mm, length 1.5 m Dimensions (H x W x D) 700 x 320 x 300 mm Weight 23.5 kg Trotec article no. 1,210,002,022 guarantee 2 years  

Read more less

Popular and easy-to-use set for leak testing and leak detection. Leaks are located by blowing in smoke, which escapes from leaky areas and can be visually detected. Thanks to its compact, lightweight aluminum construction, the set is easy to transport and ready for use quickly.   Once on site, the canister holder can be unlocked and opened up in a matter of seconds. This increases the base area and offers increased stability even on unfavorable surfaces such as graveled flat roofs.   To produce the mist, the extremely powerful turbine and the fluid pump can be continuously adjusted in terms of their performance and thus finely adapted to individual operating conditions. In addition, the intelligent power coupling of the turbine, heater and pump ensures a consistently dense mist flow for minutes without interruptions due to reheating, even at maximum turbine performance.   The fluid consumption of the FS200 is pleasingly low and is a maximum of just 100 ml per minute.     Advantages at a glance • Robust aluminium lightweight construction – therefore more than 40% lighter and smaller than the previous model • Extremely powerful blower turbine – infinitely adjustable • Space-saving integral solution with foldable canister holder • Extra dense white smoke thanks to continuously adjustable fluid pump • Easily transportable even through narrow spaces such as safety ladders • Intelligent power coupling of turbine, heater and pump for consistently dense fog delivery for minutes without interruptions due to reheating • Service-friendly design – easy filter change in seconds • Professional quality “made in Germany” – original Trotec production     Technical data   fog time at maximum level approx. 210 s Fog time at intermediate level and below permanent fog evaporator performance 1500 W turbine power blower 1600 W Power consumption max. 3100 W protection class IP54 air flow rate approx. 68 l/s (245 m³/h) fluid consumption at max. output 100 ml/min fluid consumption with continuous fog 30 ml/min warm-up time about 7 minutes connection voltage 230 V / 50 Hz Dimensions (L x W x H) 270 x 250 x 275 mm Weight (without 5-liter fluid canister) 12.5 kg Trotec article no. 3,510,010,021 guarantee 2 years     The FS200 comes with a 38 mm connection nozzle, a 5 liter canister with FluiTect branded fog concentrate, a filling hose with coupling plugs and 5 meters of fog hose (Tronect PV-A 38).

Read more less

Fog liquid to make leaks visible, suitable for the leak detection machine "Trotec FS200". According to EU criteria, it is not classified as dangerous for the environment and poses no specific danger to humans. The product is also readily biodegradable. Read the safety instructions printed on the product before use.     Data   form / viscosity Liquid / thin Color clear Odor neutral melting point not known boiling point from 100 °C flash point not applicable ignition temperature not applicable spontaneous combustion no fire-promoting properties no risk of explosion no density 1.08 - 1.10 g/ccm Solubility in water (20 °C) any PH value about 6.5 Trotec article no. 3,510,010,025    

Read more less

Even at low concentrations, ozone in the ambient air has a high potential for damage. Compliance with safe ozone limits is therefore very important to protect the health of humans and animals. With this measuring device you have the optimal test instrument for quick and precise control or long-term recording of ozone concentrations in the ambient air.   Ozone is a practically colorless gas and is produced naturally or technically. It consists of an unstable compound of 3 "O" atoms (=O3), which decomposes into oxygen (O2) after a relatively short time. In the O3 compound it is strongly oxidizing and disinfecting. It kills germs, bacteria, viruses and odors with 3000 times the power of chlorine treatment. It is therefore used in various areas to disinfect air and surfaces. However, before the treated rooms can be opened to people and animals again, it is important that the ozone value is within the permissible range. This measuring device is used for this purpose.   The device is characterized by very low cross-sensitivity to other gases or VOCs and impresses with fast measurement results with high accuracy even at the smallest ozone concentrations.   Many integrated functions such as the ozone zero adjustment, the reference value measurement option for short-term limit value and time-weighted average value or the switchable value display from ppm to µg/m³ make the fast-reacting measuring device an indispensable aid for the precise determination of ozone pollution. In addition, it is an environmental measuring unit with which air temperature and humidity can also be determined or dew point and wet bulb temperature can be calculated. The dual display of this measuring device always shows you two measured values ​​at the same time at a glance. The device can also be attached to a tripod for long-term measurements. It also has a mini USB port and a 9 V hollow plug socket, so that permanent mains operation is possible via these interfaces as an alternative to using batteries. Last but not least, a power bank can also be connected to the mini USB port for mobile power supply if required.   Advantages at a glance • Fast and precise detection of even very low ozone concentrations • Ozone measurement value display in ppm or µg/m³ • Fast response time • Low cross-sensitivity to VOCs • Ozone zero adjustment function • Ozone reference value measurement (STEL/TWA) • Atmospheric pressure offset for high-precision standard cubic meter measurements • Measurement of air temperature and humidity • Calculation of dew point and wet bulb temperature • Offset setting for air temperature and humidity • Data hold, min, max and alarm function • Display lighting • ¼-inch thread for tripod mount • In addition to battery operation, mains operation is also possible for continuous measurements • Energy-saving auto-shutdown • Calibration certificate included     Diverse application possibilities   • Workplace measurements in industry and commerce • Environmental analyses • Checking production environments • Limit value controls after use of ozone generators for odor neutralization or disinfection, for example in the hotel industry, drinking water treatment and fire and water damage restoration     scope of delivery   • Measuring device • Batteries • Operating instructions • Calibration certificate • Carrying case     Technical data Ozone (O3) measured value ppm min. 0, max. 1 ppm deviation <0.1ppm: ±0.02ppm, or ±10% of the current measured value Ozone (O3) µg/m³ min. o, max. 1,996 (at 20°C and 1,013 hPa) deviation <200 µg/m³: ±40 µg/m³, or ±10% of the current measured value temperature 0 to +50°C resolution 0.1 °C deviation ± 0.6 °C moisture 0 to 99.9 % RH resolution 0.1% RH Deviation 0% - 10% Deviation 10.1% - 70% Deviation 70.1% - 99.9% 5% 3% 5% battery (internal) 4 x AAA 1.5V (included) Weight 185 g Dimensions (L x W x H) 290 x 110 x 80 Trotec article no. 3,510,006,110 guarantee 2 years

Read more less

This extendable rail simplifies the attachment of the exhaust hose to windows with roller shutters and increases the cooling efficiency of mobile air conditioning systems. It is simply braced into the guide rails on the left and right and can be extended to a width of up to 136 cm. The window cover harmonizes perfectly with white windows and allows the warm air to be discharged through the window in a way that is almost invisible from the outside.   The exhaust hose must have a diameter of Ø15 cm; thinner or thicker hoses do not fit this system. The connection piece can be placed on the left or right side.     Advantages at a glance   • Particularly simple and visually appealing attachment of the exhaust hose to the window • The cooling efficiency of the air conditioning system is increased because less warm air from outside returns to the room • Easy installation without the need for a tradesman • Put an end to exhaust hoses hanging out of the windows • Variable adjustment for window widths from approx. 47 to 136 cm     The following models from our range are compatible:   • Argo: Argo Crono • Trotec: PAC series PAC 2100 X, PAC 2600 X, PAC 3000 X A+, PAC 3500 SH, PAC 3900 X       For casement windows and hinged doors as well as tilt windows and tilt doors, please consider our "HotAirStopper" as a suitable solution.   Trotec article no. 6.100.000.039

Read more less

This air cooler is suitable for cooling open spaces and zones comfortably and economically. Cooling takes place without any refrigerant or compressor, only with the evaporative cooling of water.   In principle, water is pumped through an absorbent honeycomb filter using a pump. A fan draws warm air through the water-soaked honeycomb, which cools it down and blows it out into the room around 5°C cooler, depending on the humidity. The evaporative cooling generated in this way is much more economical in terms of electricity consumption than conventional air conditioning units with a compressor. Since the air that is released is not only cool but also very humid, this type of unit is not suitable for small, enclosed rooms. However, they are very effective when windows are open so that the moisture can escape from the room. They can also be used in open areas such as terraces, street cafes, garden seating areas, or where workplaces in large halls need to be specifically cooled.     Operation   The water tank has a comfortable capacity of 20 liters and the water requirement is 2 liters per hour. This means that the device can provide cooling air for up to 10 hours without having to refill the water. The fan delivers a powerful 750 m³ of air circulation per hour and can be regulated in four stages. It can also be operated as a pure fan without the cooling mode switched on.   For even air distribution, the automatic swing function can be activated, whereby the inner vertical slats constantly swing back and forth from left to right. The outer horizontal slats, on the other hand, can be adjusted manually to direct the air flow forwards, upwards or downwards as desired.   In addition, additional functions are included: Timer function: With the practical 8-hour timer, you can plan the switching on and off of your device in advance. So that you don't forget to switch off the air cooler in the evening at the office, for example, simply set the desired running time in advance. Conversely, it is also very pleasant when you enter the kitchen or living room in the morning and the air cooler is already active.   Ventilation types: Constant air circulation or "air refreshment" mode. In "air refreshment" mode, the ventilation speed is automatically regulated alternately stronger and weaker. This creates a pleasantly gentle air flow in the room, reminiscent of a natural sea breeze   Fragrance oil diffuser: Fill the dispenser with your favorite fragrance if you wish. It is continuously released into the room air during operation.   Ionizer for air purification: The ionizer enriches the air blown out with anions. These refresh the air in a natural way and reduce pollutants such as odors, fine dust, bacteria or even electrosmog. In addition, the easy-to-clean nylon mesh filter filters larger particles out of the air.   All functions can also be conveniently adjusted from your seat using the remote control.   So that you can always enjoy cooling down where you need it, the air cooler can be easily moved from one place to another using the recessed handles on the side and the smooth-running transport wheels with parking brakes. Additional feet are included in the delivery for better attachment to slightly sloping surfaces.     Excellent design   The PAE air cooler also scores points visually: the stylish housing design of the two air coolers was awarded the renowned “Red Dot Design Award” and the “IF Design Award”.     Cooling with honeycomb filter, extra cold with cooling batteries   In contrast to air conditioning units, no chemical coolants are used in air coolers. The cooling process is completely natural. In addition, no exhaust hose is needed, nor are complex installations necessary. A mobile air cooler works on the principle of natural evaporative cooling. You know this from your own experience: if you blow on damp skin, you feel an immediate cooling effect, as the evaporation process removes heat. It is exactly the same with air coolers: inside the air cooler there is a honeycomb filter saturated with water using honeycomb technology. Refreshment tip: The colder the water, the greater the cooling performance. If you put the four cooling batteries included in the delivery into the water tank, the cooling performance can be increased even further. This additional kick of freshness can also be achieved with ice cubes.     level indicator and direct hose connection   The clearly visible level indicator lets you see at a glance whether there is still enough water in the voluminous 20-liter tank. When the water tank is empty, the device switches off automatically and a signal LED flashes. If you don't want to fill the tank manually, you can easily connect it to a water tap using the hose included in delivery.     Year-round operation – air cooler in summer, humidifier in winter   Thanks to its good humidification performance, the device can also be used as an efficient humidifier in autumn and winter when the air in the room is too dry. Dry heating air can irritate the respiratory tract, dry out the skin and redden the eyes. The humidification performance of this device is very high compared to conventional household humidifiers. Even at a low ventilation level, this device achieves the humidification performance of commercially available humidifiers. Even when used as a humidifier, the air is blown out cooled. However, this cooling effect is also reduced at a low ventilation level.     Benefits for the at a glance   • 4-in-1 evaporative air cooler: air cooling, ventilation, air purification, air humidification • Natural air cooling through evaporative cooling with honeycomb technology • Possibility of operation with four supplied cooling packs or ice cubes to increase cooling performance • High evaporation capacity of 2 liters per hour • 20-liter water tank for long use • Adjustable blowing direction and automatically pivoting slats • Possibility of a permanent water connection • Air purification by ionizer • Natural wind mode • IR remote control • 4 fan speeds • Timer function • Night mode • Integrated fragrance oil diffuser for optional room air aromatization • Particularly energy efficient • Easy to transport thanks to stable castors • Can also be used on floors with a slight slope thanks to the feet • Suitable for year-round use. Air cooler in summer, humidifier in winter     scope of delivery   • Air cooling device • Infrared remote control • 4 ice packs • Set for direct hose connection     functions and properties   • Air freshening function • Air cooling function • Ionization • Possibility of operation with cooling packs • Ventilation function • Evaporative cooling with honeycomb technology • Shutdown when water tank is empty • Water level indicator • Warning light when water tank is empty • Night mode • Continuous operation • adjustable blowing direction • Timer function • Swing function    timer function   • Switch-on time can be preselected • Switch-off time can be preselected   filter   • Air filter • Honeycomb filter   mobility   • Stand feet • Plastic transport rollers • recessed grips • Transport rollers -HA • Parking brakes • Feet       Technical data   evaporation performance max. 2 liters / hour Max. room size our recommendation: max. 30 m² (manufacturer's information: 60 m²) air volume flow max. 750 m³ / hour ventilation levels 4 air outlet speed max. 11 m / sec. ambient temperature +5 to +43 °C fan radial fan operating noise max. 70 dB(A) at 2.5 m distance at highest ventilation level voltage 220 - 240 V/50 Hz nominal current consumption max. 0.65 A power consumption max. 145 W Recommended coverage 10 A cable + plug approx. 1.6 m cable, 2-pin plug suitable for Swiss sockets Dimensions (H x W x L) 880 x 350 x 390 mm weight unfilled 13 kg control panel LED touchscreen remote control Yes Trotec article no. 1.210.003.020 guarantee 2 years

Read more less

The hose is particularly suitable for our devices in building drying and water damage repair. It is durable, vacuum-proof and has good pressure resistance. Also available with a 51mm diameter.   scope of delivery 15m hose reel, black (also available in yellow on request) Technical data   Suitable temperature range 0 to +85°C length extended 15 m diameter 38 mm material two-layer spiral hose with wire spring bending radius 38 mm Trotec article no. 6.100.001.010 black guarantee 2 years

Read more less

This professional ozone destroyer breaks down residual ozone up to ten times faster than the natural ozone decomposition requires. Ozone treatment of indoor spaces is an effective and proven method for large-scale disinfection or for the effective removal of odors following fire and water damage.   However, after each treatment, it was previously necessary to wait for the lengthy process of ozone depletion, during which the unoxidized ozone in the room slowly breaks down naturally into oxygen. Only when the prescribed limit values ​​are exceeded can the previously treated rooms be safely re-entered.   Indoors, the half-life of ozone under typical conditions is usually 30 to 60 minutes, which means that the ozone concentration in the room air naturally only halves hour by hour. The larger the room being treated and the more powerful the ozone disinfector used, the higher the ozone concentration in the room and the more time-consuming the natural degradation process. In addition, especially in rooms where disinfection is carried out regularly, the reduction in reagents inevitably leads to longer and longer ozone degradation phases, meaning the waiting time until the room can be safely used again becomes longer and longer, and the loss of use becomes more and more costly.   Although effective cross-ventilation could also accelerate ozone depletion, the treated rooms are rarely equipped with the necessary ventilation options, such as hotel rooms with secured windows or windowless basements, storage rooms and archive rooms.   This device enables the technical regeneration of oxygen in ozone-polluted rooms and thus significantly accelerates their economic reusability. Depending on the conditions of use, rooms can be safely entered and used again after just a tenth of the time required for the natural decomposition of ozone.     Unique master-slave solution for accelerated ozone depletion   The "Zerozon" was specially designed for combined use with all ozone disinfectors in the "Airozon" professional series. The device is equipped with a dedicated power supply and a control console for the connected Airozon device, enabling synchronized combined operation of both devices. Alternatively, standalone operation is also possible. Please note that this additional socket attached to the device complies with EU standards. For devices with a Swiss plug, this means that only two-pin Swiss plugs can be connected. Three-pin T12 plugs, on the other hand, do not fit without an adapter.   In Airozon combination mode, the Zerozon automatically switches off the connected Airozon device after the configured treatment time has been reached and automatically begins the technical oxygen regeneration. For this purpose, the Zerozon can be equipped with powerful special filters that cause accelerated catalytic ozone degradation.     Advantages at a glance   • After previous room ozonation, causes a degradation process up to a factor of 10 faster than the natural ozone decomposition • Compared to natural ozone depletion, ozone-decomposed rooms can be safely re-entered after just a tenth of the time, depending on the operating conditions • Equipped with a dedicated power supply and a control console specifically for connected Airozon Professional devices (only suitable with EU plug) • Original fleece-coated catalytic special filters for extremely fast ozone decomposition • Robust, multi-stackable construction – can also be stacked with the Airozon 20000 ozone disinfector of the same dimensions • Can also be used in standalone mode • High-quality production, made in Germany     Technical data   air volume flow max. 680 m³ / hour voltage 220 - 240 V/50 Hz nominal current consumption max. 0.8 A power consumption max. 175 W Recommended coverage 10 A cable + plug approx. 3m cable, EU plug with Swiss fixed adapter T12 Dimensions (H x W x L) 400 x 370 x 547 mm Weight 15 kg operating hour meter Yes Trotec article no. 1,180,000,019 guarantee 2 years

Read more less

The three-stage adjustable turbo motor reaches up to 20,000 rpm and guarantees maximum efficiency at every power level because, thanks to the integrated automatic system, the current volume flow in m³ is constantly recorded and the power is automatically regulated to the optimum air throughput.   Just press a button and the device switches to a higher performance class or, if required, to the additionally available whisper mode:     performance levels   Performance level 1: suitable for areas up to approx. 30 m² at overpressure / 25 m² at negative pressure, motor power: 0.5 kW Performance level 2: suitable for areas up to approx. 60 m² at overpressure / 50 m² at negative pressure, motor power: 0.8 kW Performance level 3: suitable for areas up to approx. 90 m² at overpressure / 70 m² at negative pressure, motor power: 1.2 kW   Comparison with previous models based on side channel compressor technology: Power level 1: Corresponds to the power of a 0.8 kW side channel compressor Power level 2: approx. 10% more powerful than a side channel compressor with 1.1 to 1.3 kW power Performance level 3: Corresponds to 140% of the performance of a 1.1 kW to 1.3 kW side channel compressor and 80% of the performance of a 3 kW side channel compressor The wear-free touch control panel of this new insulation layer dryer allows convenient operation at the touch of a finger. No controls, no wear.   The new whisper mode reduces the noise level of the unit for 10 hours, but the device still works as efficiently as usual. In addition, it has an interface for data exchange with the latest generation of our drying unit DA 4 M. The connection of both units enables networking of all device data including real-time remote monitoring of system status and drying progress. Not only are the current operating status and volume flow clearly visible on the multifunction display - even in the dark or from a distance - the color of the display lighting also automatically shows how effectively the drying air can flow through the insulation layer in your installation.     Performance-optimized energy consumption through HiDry automatic   In contrast to conventional compressor turbines, the power and power consumption of VX turbo engines are always linearly correlated. If the power is reduced, the power consumption is also reduced. In addition, the power control is not resistance-oriented, but is geared to the required volume flow. Thanks to this technology, VX units operate at an energy-saving eco rate compared to turbine compressors, especially in the final drying phase.     Advantages at a glance   • Unique adaptronic power control - virtually eliminates the need for thinking in device classes • Replaces all side channel compressors in the power classes from 0.8 kW to 3 kW • Super light - only 10 kg • 35% lighter than comparable competitor models • Up to 75% lighter than side channel blowers of the same performance class • DA-4 interface for networking all device data including real-time remote monitoring of system status and drying progress • Optiflow-NT multifunction display with plain text status display and performance control color lighting • Digital counter for operating hours and energy consumption • Whisper mode for very quiet night operation • Wear-free touch control panel • HotStop system • Service socket for dehumidifier (EU socket!) • Cable holder with lockable plug • Plain text status display • Protective recessed controls • Maintenance quick-release fasteners       scope of delivery   device with • 2x connection pieces for 38 mm hoses • Filter sieve for drying using the overpressure process • 2x VX microfilter element fine dust filter class F8     Important   • The four-way distributor shown in the product image is not included in the scope of delivery • The blue socket on the device corresponds to an EU socket. Only 2-pin plugs are suitable for Swiss devices     Technical data   Recommended room size overpressure 90 m² negative pressure 70 m² max. overpressure 270 mbar max. negative pressure 220 mbar air volume free blowing 250 m³/h Defined volume flow optimum (aspirating)       Whisper mode level: 100 m³/h Level 1: 100 m³/h Level 2: 150 m³/h Level 3: 180 m³/h Level 4: 250 m³/h power connection 230 V / 50 Hz nominal current consumption max. 5.5 A power consumption max. 1200W cable length approx. 3.5 m Plug EU plug with Swiss adapter Dimensions W x H x D 430 x 415 x 420 mm Weight 10 kg Trotec article no. 1,560,000,042 guarantee 2 years

Read more less

Modern insulation dryers are soundproofed as best as possible, but due to their function they cause turbine-like noises, which are often perceived as annoying by residents. This damper can be easily integrated into the drying system and significantly reduces the operating noise.   Extensive practical tests have shown significant noise reductions when used with insulation drying units from leading manufacturers. This universally applicable module is particularly suitable for use with Trotec insulation drying units and offers even more noise reduction without dynamic pressure.   More No power connection required. The filter is integrated into the air flow of the rest of the drying system.    Advantages at a glance   • Noise reduction between 14 and 19 dB(A) possible • No loss of power and no back pressure • Compatible with many common insulation drying units • Universally applicable for 38 mm and 50 mm hoses • For compressor operation in negative and positive pressure mode • Specially designed for flexible and stable stacking installation “from a single source” with MultiQube system components • 100% recyclable     Technical data   sound reduction 14 - 19 dB(A) air hose connections 2 nozzles of 38 mm each (optional rubber adapter available to 50 mm) Dimensions (L x W x H) 378 x 378 x 132 mm Weight 3.4 kg Trotec article no. 6,100,000,120 guarantee 2 years

Read more less

A handy, inexpensive device for quick and reliable measurements of a wide range of noise sources within a measuring range of 40 to 130 dB(A). Minimum and maximum values ​​can also be displayed.   For use in windy outdoor environments, an attachable windshield is also included in the scope of delivery, which suppresses annoying wind noise. This means that the measured values ​​are not affected.   An integrated sensor constantly monitors the ambient light and automatically switches on the display lighting in poor lighting conditions.     Diverse application possibilities   Thanks to the successful combination of innovative features, ergonomic design and affordable price, this precision instrument is suitable for a wide range of applications. For example, for measuring noise and sound in the office, during leisure time, during machine inspections, in private living environments, on construction sites, traffic noise, maintaining the volume of music and much more.   It can also be used for quality control in the construction industry, for example to detect sources of noise or weak insulation. The disturbing noises are often transmitted through the ventilation system or other supply shafts.     Advantages at a glance • Measures sound quickly and reliably • Optimal price-performance ratio • Minimum value, maximum value and hold function • Sensor-controlled display lighting in poor lighting conditions • Simple one-handed operation • Very short response time • Tripod thread • Practice-optimized German industrial design - protected design     scope of delivery   • Measuring device • Battery • Wind protection • Operating instructions     Technical data   sensor technology sound dB(A) sound measuring range 40 - 130 dB(A) accuracy ±3.5 dB(A) (at 1 kHz and 94 dB(A)) resolution 0.1 dB(A) response time 0.125 seconds frequency range 31.5 Hz - 8 kHz power supply 9V block battery operating time > 30 hours Weight 135 g Dimensions (H x W x D) 132 x 56 x 33 mm Vicinity: temperature humidity 0 - 40 °C 10 - 75 % RH (non-condensing) Trotec article no. 3,510,205,051 guarantee 2 years

Read more less

A precise measuring device for quick control and monitoring of environmental noise, noise in the workplace and in the private environment. Measures noise sources within a measuring range of 30 to 130 dB(A). Minimum and maximum values ​​can also be displayed and saved.   This easy-to-use sound level meter combines modern electrodynamic sound transducer technology in a compact design. As a sound level meter corresponding to accuracy class 2, the device is ideal for documenting machine and environmental noise or workplace and noise hazard measurements.   The large four-digit measurement display with additional bar graph display is easy to read in any environment thanks to the LCD backlight.   With A and C frequency weighting, fast-slow time weighting and many other practical functions, this measuring device from the MultiMeasure Professional series is the perfect solution for demanding sound level measurements.   Handy format, low weight and button layout optimized for one-handed operation.     Versatile application, for example   • Noise hazard measurements for occupational safety • Environmental protection operations to determine environmental noise • Determination of noise areas for noise reduction programs in companies • Checking and selecting hearing protection devices • Compliance monitoring of noise protection regulations • Control measurements in air conditioning and heating technology     Advantages at a glance   • Corresponds to accuracy class 2 • Frequency evaluation according to characteristic curves A and C • Maximum and minimum value memory • Memory for 50 measured values • Switchable time evaluation (Fast?/?Slow) • Display lighting • BarGraph display • 1/4-inch tripod thread     scope of delivery   • Measuring device • Battery • Wind protection • Carrying case • Operating instructions     Technical data   sensor technology Sound dB(A) + Sound dB(C) sound measuring range 30 - 130 dB(A) sub-measuring ranges 30...80 dB, 50...100 dB, 80...130 dB, 30...130 (auto) dB(A) accuracy Class 2 according to DIN EN 61.672 resolution 0.1 dB(A) response time 0.5 seconds frequency range 31.5 Hz - 8 kHz dynamic range 50 dB data storage 50 measured values power supply 9V block battery operating time > 30 hours Weight 230 g Dimensions (H x W x D) 210 x 55 x 32 mm Vicinity: temperature humidity 0 - 40 °C 10 - 90 % RH (non-condensing) Trotec article no. 3,510,005,010 guarantee 2 years

Read more less

This high-quality air hose is ideal for conveying gaseous media in areas where static charge must be avoided, e.g. duct ventilation and de-aeration, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards.   Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to wider spiral spacing. The AP hoses are therefore ideal for installation on the exhaust side of fans.     Advantages at a glance   • Temperature range: -20 °C to +100 °C • made of antistatic, PVC-coated polyamide fabric • robust with highly flexible • good compressibility • with abrasion protection and integrated steel spiral • spiral-free sleeves on both sides • Spiral spacing 150 mm • Standard length 7.6 m • Bending radius 0.5 x ø     We recommend that you only use the SP series air transport hoses in combination with the corresponding connecting pieces.   Trotec article no. 6.100.001.410

Read more less

This high-quality air hose is ideal for conveying gaseous media in areas where static charge must be avoided, e.g. duct ventilation and deaeration, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards.   Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to wider spiral spacing. The AP hoses are therefore ideal for installation on the exhaust side of fans.     Advantages at a glance   • Temperature range: -20 °C to +100 °C • made of antistatic, PVC-coated polyamide fabric • robust with highly flexible • good compressibility • with abrasion protection and integrated steel spiral • spiral-free sleeves on both sides • Spiral spacing 150 mm • Standard length 7.6 m • Bending radius 0.5 x ø     We recommend that you only use the SP series air transport hoses in combination with the corresponding connecting pieces.   Trotec article no. 6.100.001.420

Read more less